IPad will not turn off screen is white showing correct time only
I tried to relocate my settings icon and it dissapeared tried turning off and on then iPad siezed up with a white screen. The only thing at the top of the screen is the correct time. Can this problem be rectified. Help thanks
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Similar Messages
-
Ipad will not turn off, sound button does not work, camera does not work, screen will not rotate. Have new ios and update.
Reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset. -
My iPad will not turn off. I have done the off/sleep key home button procedure.
Just to be perfectly clear, when you reset the iPad by hod,ing down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen, that is a way of resetting the system and restrating the device. If you want to shut down, you still have to hold down on the power button until the slider appears and then slide to the right to shut the iPad off.
IS this what you are doing and if so what happens when you try to shut down? Describe what happens in detail. -
My Apple TV just has a white blinking light. Will not turn off. The TV shows nothing but the Apple logo. It worked fine yesterday. PS - I am not an IT person.
pull the plug for 30sec and try reconnecting power
if that don't help
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support -
My Ipad will not turn off what can I do ?
My ipad will not turn off what can i do ?
Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Let it start up completely and then you can shut down if you want to do so. -
Ipad will not turn on, screen is black
ipad will not turn on, screen is black
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
My iPad will not turn off. The power button no longer seems to do anything. Any ideas.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
My ipad will not turn on - screen is dark blue
My ipad will not turn on - I have shut it off many times, hooked it up to my computer and updated. The screen appears a dark blue (almost black) when I push home button - I tried to slide to open it and it doesn't open. What should I do?
Please tell me that it has NEVER been jailbroke. If it hasn't been, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
Ipad will not turn off at all and it still has the buffering symbol
My iPad will not turn on or off. It has the buffering symbol and it has been buffering for hours. What do I do?
connect your ipad to itunes and just restore or update it
if that does not work put your ipad into DFU mode
here are some tips:_
Here are steps to get DFU Mode: Open iTunes on computer. Connect iPhone to computer. (some turn off iPhone here, I do not) Hold both home and power buttons for exactly 10 seconds, release power button, keep holding home button until iPhone recognizes iPhone in Recovery Mode. Usually takes 10-20 seconds of holding the home button. If the iPhone screen is black (blank) the iPhone is in DFU Mode.
You can search the Web for even deeper DFU Modes that can be achieved to avoid iTunes Errors, but these techniques cannot be discussed on Apple Supported Forums. -
Ipad will not power off. It says twitter would like to access to twitter accounts dont allow allow
Try doing a forced/hard reset - hold the home button and power button till the deivce shows an apple logo.
-
Itune icon is on ipad screen , Ipad will not turn off or reboot
ITunes icon is on the IPad screen with a picture of USB ... each time I try to turn off the Ipad it just turns on again ... cannot access anything please help
Its in recovery mode.
So you need to restore the ipad. And this will delete everything on there.
I hope you had a backup recent in icloud or itunes.
Here how to restore click link below.
http://support.apple.com/kb/ht1414
To restore from a back up click this
http://support.apple.com/kb/ht1766 -
Please help me turn my ipad on. The swip feature will not let me get access to my ipad apps and pages. It does have a msg that I have ran out of storage. Although this should still let me in so i can clean up my pictures or files and make more storage. Please help me.
Hi sunshine2day,
Welcome to the Support Communities!
Try these troubleshooting steps:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Once you have access to your apps and data, these articles may help you:
iOS: 'Not enough free space' alert when trying to sync
http://support.apple.com/kb/TS1503
iPhone, iPad, and iPod: Understanding capacity
http://support.apple.com/kb/HT1867
Cheers,
Judy -
TS3274 My ipad will not turn off/go past the black apple screen
My ipad was generally being slow and unresponsive so I switched it off, when I tried to turn it back on it came up with the Black screen with the apple and has won't come off that. What do I do?
Press and hold both the Home and Power buttons until it restarts.
-
Ipad will not turn off when charging
When I charge my iphone I usually plug it in and then power it off. I cant get this to work with ipad; it will power down and then restart. How can I get it to stay powered down?
I posted this on a previous thread a couple of day ago. I don't know exactly how the iPad is supposed to behave, but I was able to experience not being able to shut the device off completely after having done so for weeks. For me it seems to be related to how low the battery is ....
I experienced this very "bug" last night when I started to charge my iPad. I had never run the battery down to 15% prior to last night. When I plugged in the charger, it would restart, I would turn it off and then it would restart. I repeated this process four or five times and then I finally decided to simply put the iPad to sleep while it was charging, before I turned in for the night.
When I woke up this morning to a 100% charge I decided to try to repeat the process. I unplugged the iPad from the charger, turned it on and then turned it off again. Then I plugged the charger back in, the iPad turned on and then I turned it off and it stayed off this time.
My suggestion is that it may be that the iPad is supposed to behave this way when the battery power drops below a certain percentage. I too became a bit concerned at first as I had never experienced that before. Now that the iPad is behaving "normally" again, I am assuming that the device is built to continue to restart while recharging when the battery drains to a low level.
Mine is working fine, no worries and all is good. Happy holidays! -
Plz help.
Hi BigMIKE29,
Not sure what "everything" entails, but have you tried a reset (nothing will be lost): Hold down the Home and Power buttons at the same time and conintue to hold them down until the Apple appears (up to 30 seconds). Once the Apple appears the reset is in progress, and the Home screen will display shortly.
Cheers,
GB
Maybe you are looking for
-
When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table in the list I created ret
-
Changing Media Start and End of Logged Clips
This should be really simple, and I'm sure I'm just overlooking something. I am trying to recapture some clips in Final Cut Pro and it was fine until I came to a clip that gave me the "timecode error - pre roll, post roll, etc" message. The Media Sta
-
SCXI-1001 possible overheatin​g
I'm using an SCXI-1001 chassis to aquire analog signals and provide output for controls. The system had been working perfectly for weeks until, in a recent test, all the input signals were suddenly recorded as zero. Here are the exact symptoms
-
Execute sql server dts package
Does anyone have sample code for executing MS sql server dts package in java application? The following parameters are required for executing the package: DTS package name="tranfer" login="uid" password="password" Thank you very much!
-
Is the Adobe forum merging with Behance?
I have been using the forum for a while and it was very intuitive and well laid out... Why did you change it so much and add so many features to make it more like a social community? I thought behance was the social community? I don't like the forum