Ipad will not turn on after trying to install ios 6.1
after trying to install ios 6.1 my ipad seems dead, the apple comes on and off, and the battery shows no life, after it has been plugged in for hours.
See Here > http://support.apple.com/kb/ht4097
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.
Similar Messages
-
HT4623 Help my iPhone will not turn on after trying to update
After looking at my phone and realising that it had an update I decided to update... It was norton charge or plugged in and now will not turn on? Tried plugging it in but has been on charge for about an hour now and it's still not turning on? Pls help... Tried the home button and the on/off button together but still no joy
neilied wrote:
It was norton charge or plugged in
Sorry... What does this mean. ?
neilied wrote:
Tried plugging it in but has been on charge for about an hour now and it's still not turning on?
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps... -
my phone wil not turn on after trying to update now all it de si tell me to plug into itunes which i have ready done and still nothing happens can you help
Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time.
-
My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?
My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
Please help!That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
iTunes: Restoring iOS software -
4th Generation iPad will not turn on after being restored
I just restored my mother's new 4th generation ipad with all of her data from her gen 1 iPad. Once it was done downloading all of her app's, the 4th Generation iPad shut down.
I tried to reset it by using the sleep button and home button and it never turned back on.
I've connected it to my Mac and cannot get any response from the iPad.
Any suggestions?Some iPad users have been able to revive their dropped iPad. Turn the iPad over and give it a HARD SLAP on the back. May take several slaps.
dropped iPad
https://discussions.apple.com/thread/4474708?tstart=30
Cheers, Tom -
My ipad will not turn on after being dropped
My IPad fell off the sofa, and the screen no longer works. It has turned black but i can still hear the sounds on it. I really need help with this.
Some iPad users have been able to revive their dropped iPad. Turn the iPad over and give it a HARD SLAP on the back. May take several slaps.
dropped iPad
https://discussions.apple.com/thread/4474708?tstart=30
Cheers, Tom -
my ipad will not turn on after using it earlier today has anyone else had this problem?
If you have juice left in the battery, Reboot your iPad. Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (hold past the swipe to shut down bar) until the Apple Logo appears, then let go of both buttons and your iPad will restart. It's safe and you won't lose any data.
-
HT1414 My ipad will not turn on or take a charge
My ipad will not turn on or take a charge
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
When tryed to run diagnostic test windows blacked out then blue screen ipad will not turn on now
when I ran a diaganostic test windows blacked out and then the "blue screen of death"........and now my ipad will not turn on ......has anyone had this problem ?...if so...what now
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
My first genteration ipad will not power on after update. I have tried connecting to the authorized computer which won't recognize it - does not acknowledge a device is plugged in. I have pushed top and circle buttons at same time. It had a battery charge before it died. I tried to stop the upload midway and am afraid it 'crashed'
Try putting it into recovery mode.
Connect iPad to your computer via USB while it's turned on.
Open iTunes
Hold the iPad's Sleep/Wake switch (power button on the top of the iPad) down until the "power off" slider appears.
Power off the iPad completely (wait for the progress spinner to disappear).
Hold the Sleep/Wake switch AND the Home button down for a full 10 seconds.
After 10 seconds (the second time you'll see the Apple logo on the screen) release the Sleep/Wake switch while still holding the Home button.
Continue to hold the Home button for another 10 seconds until the USB connection image appears on the iPad's screen, then release the Home button.
A pop-up message will appear on iTunes saying it has detected an iPad in recovery mode, you must restore...
Click on the "Restore" button and the process will begin. -
I just tried updating my iPad through iTunes and it said it was unsuccessful and now is telling me to restore my iPad!! why is this and I'm not sure if it did back up because my iPad will not turn on.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My third gen iPad will not turn on.
I tried to reset, and the apple icon appears, but it will not load.
I attempted to restore it through iTunes, but it could not recognize it.
Any suggestions would be appreciated. Of course, it is out of warranty.What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
My ipad will not turn on and is charged. I have also tried to reset my ipad by holding in the off/on button and the home button at the same time , but it did not work. The screen flickered a couple times and then went black. Is there anything else I can try?
Hi,
Does anything appear on the screen at all, e.g: Apple Logo etc?
You may also find the information here useful: iOS: Not responding or does not turn on
Regards,
Steve -
My iPAD will not turn on even after charging. thoughts?
my iPAD will not turn on even after charging. thoughts?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Ipad will not turn on or do anything. I have the new Ipad.Whats wrong?
Ipad will not turn on. I have the new Ipad. Whats wrong? Its only about 2 months old.
Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Maybe you are looking for
-
Can not refresh view data in STRUST
I am using the JSP (STRUTS) for developing my App. I get a list of contact. In bellow it, I make a link for each contacts. When i view details of one contact. On click link below. My pages: listcontact.jsp contactdetails.jsp When i request a details
-
How to call reports 6i or forms 6i directly from oracle procedure
Hi, Hi, Env: 6.0.8.25.2 (forms 6i/reports 6i) Database: Oracle 10g r2 We are running a client server environment and not web based. I want to run the forms 6i or reports 6i directly from a database procedure/function and not by creating a procedure i
-
If you look at this page in Firefox, http://www.vpi-corp.com/Empower-Demo/index-iframe.asp, you will see that the html portion of the page loads, and if you right click in the white area in the middle, the Flash is present as well. I can view this pa
-
Canl connect mac book pro to tv bravia wireless
can l connect mac book pro to tv bravia wireless
-
I'm working in MOTION 3. I'm working with a template that has drop zones into which you're intended to place pictures or video. When I drop the pictures in, they are too large...meaning parts of the picture are being cut off, or are outside the param