IPad wireless sync not working

My iPad stopped wireless syncing. For some reason when I goto Settings/General/iTunes WiFi Sync the computer name for syncing is wrong. My computer is named "xxxx" and my iPad seems to be trying to connect to "xxxx (2)". I have no computer/user on the macbook named that. When physically connected i can sync, but the ipad and macbook dont see each other otherwise. Is there a way to change the sought computer name on the ipad. This seems to be the way to make it work.

Well thanks all for your suggestions. I have now got it to work but after I restored iPad 2 back to previous version then reinstall ios5 onto iPad 2. Now it seems to be working fine and touch wood it will continue to be good for me lol.
Thanks again all.

Similar Messages

Wireless sync not working for calender?

I’m not really sure what else to say about this problem other than everyone else in my office has no problems with their blackberrys syncing with their outlooks calenders ect. I get my e-mail but my calendar doesn’t update. My work e-mail isn’t my default calendar, don’t know if that’s the problem (even though I went to advanced options à default services, and it says that it is), I deleted my other e-mail off my phone to try to resolve the issue but nothing. Also when I go into options under my calendar under wireless sync the option says No, but when I click it to change it all it does is bring up the menu to save or exit? Hopefully this info helps, I would really appreciate any input, my calendar not syncing is a big downside for me as I use my outlook calendar and my phone calendar a lot, and would like them together.
Regards,Ryan

Well I must be on a BES because everyone else in my office has no problems with this feature. And my only option for default calender is my work e-mail.
Anyone?

Wireless sync not working on my iphone 5

Anyone else having this problem?

I have this issue with my iPhone 5 using IOS 6.1.4. My symptoms is that discovery intermittantly doesn't work. When the iPhone is on the network and visible in iTunes 10.7 sync will work fine. When it's not visible I don't get any sync going as the iPhone isn't found even if I restart iTunes. Also, initiating the sync from the iPhone doesn't work even if iTunes is open
I rarely restart the mac if ever. I see no clear reason except that the discovery phase is acting up. It could also be interference from neighbour networks.

IOS 5 wifi sync not working on iPad 2

Just installed IOS 5 on my iPad but, its not working. Ive ticked the wifi sync option in itunes, plugged it into the wall, even unplugged and restarted my wifi,restore ios firmware and even reinstall itunes..Ive tried everthing and i just cant get it to work. When i try it just has the "Sync Now" option greyed out and says "Sync will resume when <computer name> is available. When I detach my cable during the syncing iTunes just can't detect my iDevice...Help SOS..

I have the same issue, and it seems to be fairly common. I don't think they have all the bugs worked out of WiFi sync yet. After reading on another forum, try the steps below, they work for me but usually only once. I then have to do it again to get another sync.
1. Turn off the iPad, close iTunes on your computer.
2. Restart iTunes, then turn your iPad on and try the sync again.

My mini iPad is now not working . just showing iTunes sign and to connect to usb cable.

my mini iPad is now not working . just showing iTunes sign and to connect to usb cable. I have done that buy macbook is not discovering iPad as a device. Any ideas ?

If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad Stuck in Recovery Mode after Update
http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices
http://osxdaily.com/2013/02/17/wi-fi-sync-not-working-fix-ios/
 Cheers, Tom

Wireless sync only works when I unlock phone. Is there a way to tell itunes my phones unlock code?

Wireless sync only works when I unlock phone. Is there a way to tell itunes my phones unlock code? Itunes tries to sync all night and posts 50 unknown errors. I unlock the phone and it syncs. I dont want my phone sitting around without a lock code but with wireless sync I cant find a place to tell itunes my code so it can sync? Any help is appreciated... Ray O

I have the same problem. I am forced to have a PIN set on my devices because I use my corporate exchange email and sync over wi-fi initially fails until I manually unlock the phone/ipad. #ckuan needs to read the words wiritten. We know how it's supposed to work but it won't start until you enter the PIN. Until then I get error messages saying either it cannot find the phone or explicitly telling me I need to unlock it.

Apps downloaded are appearing as "loading" on ipad 2 and not working

I have downloaded couple of application through iTunes and loaded them to ipad2 64gd wifi 4g. They are appearing as "loading" on ipad 2 and not working. Tried to restore ipad to presious version os and reboot etc. but nothing worked. Can someone help please.

Check iTunes and see if you have a pending or stalled download in there. If you do, finish that download or delete it if you can. If you can't finish or delete the download on the iPad, do it in iTunes on your computer and then sync the iPad. Then go back to the apps and see if they will download.
If that doesn't work or if that was not the problem, go to Settings>Store >Apple ID, tap your ID and sign out. Then reboot the iPad, Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Then go back to Settings>Store>Sign in and sign in again and see if the apps will update.

HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes

please help my ipad min is not working on the scren it says iPad disabled connect to itunes

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT1947 Remote for ipad landscape orientation not working in ios 7

Remote for ipad landscape orientation not working in ios 7

See this thread: remote app rotation locked in portrait orientation after iOS 7 upgrade
It is a discussion only - no helpful hints. Appears to be a bug for sure.

My Ipad 2 is not working. Is not tuening On. I dont' know what's happening. I'm trying to turn on and I have no ansewr. Screen is out, nothing come to the screen.

My Ipad 2 is not working. Is not turning On. I dont' know what's happening. I'm trying to turn it on and I have no answer. Screen is out, nothing come to the screen. Battery is ok at 60% charged when I turned off last time, and after minutes when I turned on, it not worked anymore. If somebody have an idea what may happenning, please let me know.

I don't know what yu mean by "screen is out" but try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

Hello @GeoffH777 ,
Perfect! You are very welcome, I am very happy to hear the reset helped!
If you have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
Greatly appreciated, have a wonderful day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Wifi Sync not working on iOS 6 and iTunes 10.7 with iPhone 4S

I am running Windows 7 64-bit but WiFi Sync is not working on either my iPhone 4S or my wife's iPhone 4S. Worked fine before upgrading. All settings look correct in iTunes 10.7 and on our iPhones 4S's. Already tried uninstalling iTunes and all associated Apple programs (Bonjour, Apple Mobile Device Support, Apple Application Support, etc) and reinstalling iTunes but no help. Temporarily disabling Norton Firewall did not help. If I hook up either of our two 4S phones via USB wire, they Sync and Backup fine. Just WiFi Sync not working. Can't initiate sync from iPhones because button is ghosted stating it is waiting for PC to be present. Phones don't show up under Devices in iTunes unless hard-wired via USB cable. Any suggestions?

I am getting sync issues too (although on OSX) - seems like others are getting issues too:
https://discussions.apple.com/message/19834721#19834721
Good luck,
Chris

My Ipad keyboard is not working in email now that I have downloaded the OS6. Anyone know how to fix it?

My Ipad keyboard is not working in email now that I have downloaded the OS6. Anyone know how to fix it?

I have the same problem. Emailed apple--no help

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

IPad wireless sync not working

Similar Messages

Maybe you are looking for