IPad with USB modem

Anybody know how I can enable my iPad to see my shared Internet connection? I'm connecting to the Net with a VZAccess on a UM150 USB evdo modem.
I've tried using a wireless router as an access point but it can't "see" the shared connection. The iPad can see the wireless network, but it can't connect to the Net. Both Belkin and Linksys techs say it isn't possible, I have to have a modem with an ethernet port, but I can't believe that.
Thanks,
Jim

Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
Followed by a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Similar Messages

Update iPad with 3G modem

How can I update iPad with 3G modem? Modem blocks another USB port thus they can't be plugged in simultaneously.

A short USB male > female cable will allow both to be attached at once.
I use a USB 3G Stick modem attached via a USB cable for all my Internet.
Best.

I have installed Itunes on my pc home (Windows Vista). Then i buy an app, but now i can't install it on on my ipad (with USB). What i have to do?

I have installed Itunes on my pc home (Windows Vista). Then i buy an app, but now i can't install it on on my ipad (with USB). What i have to do? thanks

1. Right-click on device
2. Transfer Purchases

When I connect my iPad with usb to my mac the iPad gives me a "blinking" message asking to trust the computer. Problem is it does not give me enough time to select yes. What am I doing wrong? Help!

When I connect my iPad with usb to my mac the iPad gives me a "blinking" message asking to trust the computer. Problem is it does not give me enough time to select yes. What am I doing wrong? Help!

Everything that you sync to the iPad is done through iTunes or from downloading from the cloud if they are iTunes purchases or through iTunes Match, if subscribed.
It is also not possible to transfer music or certain other files though Bluetooth between other iPhones or Android devices. You can transfer between iOS devices, pictures through devices that are Airdrop capable.

Am i able to connect 40 iPads with USB hub(Powered) to iTunes (Windows) and Sync?

Dear Apple Support,
I would like to ask about can i connect 40 iPads with (USB Hub(Powered) able to support up to 127 Devices) to iTunes(Windows) and Sync all with same Apps?
Regards,
Xentrino

Okay... I've just found the solution. It's really simple, just plug the phone to the MacBook, fire up iTunes, check the "Sync Photos from iPhoto" option, make sure all the other options are not checked, and just sync. Voila! my iPhoto library is now in the palm of my hand.

Power management problem with USB modem

I now use a MS-6743 (i865G) board. My previous board was MS-6533, it did not have USB v2.0.
The problem is my Aztech (originally Smartlink) USB modem prevents the system going into standby mode but this should be a USB 2.0 issue because I'm using the same driver for the modem like previous mainboard config. I could go into standby mode flawlessly with my old board.
Furthermore I'm using USB keyboard, mouse but no power management property dialog box appear for those devices. So I'm pretty sure the problem is because of USB 2.0. Is there a way to come around this issue? Thanks in advance...

To pin point whether or not IRQs conflicts is to be blamed, please kindly post your IRQs conflicts for us to verify.
A signature of your system setup will proves greater help for others to advice you with more accurate directions and benefits you in the future.
Please read this Moan Guide too.

Problem with USB Modem (Apple)

Hello,
I have a MacBookPro and a recently purchased the Apple USB External Modem. When I connect to the computer once I get a sign that reads:
Incompatible. You can not use an Apple USB External Modem on this computer.
Please, I am overwhelmed with this, anyone can tell me what happens??
Thanks, and sorry for my English.

The Apple USB modem requires Mac OS X v10.4.3 through Mac OS X v10.6.8 running in 32 bit mode. This modem has been discontinued.

Problem with USB modem

I have just bought a macbook with mac os X tiger. I have a problem with network configuration when I'd like to setup my broadband. I'm now using Tiscali broadband which supplied me a USB modem (Sagem Fast 800). I've already installed the software and driver. The problem appeared when I tried to configured the network setting. I couldn't find "external modem" or "ethernet adaptor" as the manual suggests. As a result, I couldn't make any interent connection. It'd be so grateful if anyone who's using tiscali broadband can kindly give me the solution for this.

Hi,
Thanks a lot for your reply. I've looked in the network port configurations and found "Airport", "Bluetooth", "Biult-in Ethernet" and "Built-in Firewire". All of these are checked but I can't see the "external modem" port. I also rebooted the conputer after installing the software and driver. There is a software "ADSL Monitor" shown up in my desktop but can't see the device in the network configurations.

Faxing with usb modem

My mac mini is connected to the net through an ethernet cable.
Can I fax off my mac with a usb modem and still have it connected with the ethernet.
Is it possible??? anyone out there doing it.
Thanks.
Gragum

Yes, there should be no conflict. I have done it. Not with a Mini, but it shouldn't make any difference.

MS6340 v3.0B with USB Modem?

Hi all,
I have a MS-6340 Ver3.0 B Mainboard and I'm thinking about to buy a USB modem. However, I've heard that USB modems can cause problems with Athlon or the VIA chipset. Does anyone have the same board with a USB modem. Does it work ok or should I buy an ethernet modem?
Regards )
Ron

Hi,
I would buy an ethernet modem in any case, as they don't use the CPU as much as the USB modems do...
They are more stable too, so in any case it's a better buy...

Problem with USB modem in OS Yosemite

Hi, I am using HUAWEI E173Bu-1 mobile broadband USB modem, after installing OS Yosemite in my mac book pro it was not working properly. Even it doesn't show the signal of the network provider. Anyone faced similar problems and solved the same pls help..

Have you checked the manufacturer's web site for an update?

Having trouble faxing with usb modem

I found out the you could fax right from the Mac and was thrilled, but hit a snag when I discovered that you could only do it through a analog modem that connected directly to your phone line (DSL or ADSL doesn't work) so I bought the apple usb modem, at first I could send faxes just fine but couldn't receive them, so I tried attaching a 2wire filter on the phone line too filter the DSL out. Now I can receive part of the fax, but only part of it. Some times half the page and sometimes jst one line. what am I doing wrong now????? Please help I've been trying for 2 weeks to get this going, and I'm so close, but this ain't horse shoes. Going Crazy.
Thanks.

I know the answer to this question. I found it on the reviews of the modem on the UK Apple Store.
In order to get the Mac to recognize the modem as one that accepts faxes, you have to send out one fax. I took a random Web page on Safari, did File>Print, and then selected the PDF drop down in the lower left corner. Then select Fax PDF, and then choose the external modem as the sending device.
You don't even have to send it to a real fax machine, just the attempt on sending somehow automatically sets up the modem to accept faxes! I just entered my cell phone number, and then let it ring without answering, then deleted the fax from the print queue. Meantime, miraculously, the modem started receiving faxes...
Now why didn't Apple just tell us this in the first place?

Faxing with usb modem trouble

I found out the you could fax right from the Mac and was thrilled, but hit a snag when I discovered that you could only do it through a analog modem that connected directly to your phone line (DSL or ADSL doesn't work) so I bought the apple usb modem, at first I could send faxes just fine but couldn't receive them, so I tried attaching a 2wire filter on the phone line too filter the DSL out. Now I can receive part of the fax, but only part of it. Some times half the page and sometimes jst one line. what am I doing wrong now????? Please help I've been trying for 2 weeks to get this going, and I'm so close, but this ain't horse shoes. Going Crazy.
Thanks.

What happens if you take the DSL modem out of the picture altogether (unplug it and any DSL filters from the phone wall jack) and plug in the  USB modem into the phone wall jack all by itself? Can you send/receive faxes okay then?

Ibook wifi with usb modem with adsl router

how could you connect the ibook so that it's wireless to the phone line. I'm gonna have to buy all the parts but what's the easiest way to do this ?

To give the iBook G4 wireless the ability to connect to a wireless network, you simply need to install an AirPort Extreme card. The last iBook G4s had wireless built-in.
If you have a ADSL modem without an Ethernet output you will need to replace that modem with a modem that does have an Ethernet output. Then you can buy any inexpensive 802.11b/g compliant wireless router to provide a wireless network for your iBook.

Set up Time capsule with USB modem

HI
I'm relatively new to my mac & I just purchased a time capsule. I use a Verizon USB modem for internet and this has caused me some problems trying to set up the TC.
Is there anything any one can tell me to help? I could use some step by step help. The light is green, says I was successful but I can't print & have not even tried anything else. I just know my internet connection is wrong.....
Any suggestions would be appreciated!

I was hoping I could set it up for remote printing & backup w/o using internet connection. No?
Although the Time Capsule (TC) could be configured a number of ways, having a USB modem will limit you somewhat. I am assuming that your modem is not wireless and that you connect your MacBook Pro directly for Internet access using an USB cable ... correct?
Since the modem doesn't have an Ethernet port, the only option you will have for the TC is to operate it as a wireless network ... basically its default configuration. You then have two choices on how to connect your MBP to the TC: by Ethernet or wirelessly.

IPad with USB modem

Similar Messages

Maybe you are looking for