IPad won't print wireless since power went off and on yesterday, but will print wirelessly from laptop. What do I do?
iPad says my printer is off line ( since power went off and on yesterday. My laptop prints wireless though so I am wondering how to get my IPad back to printing?
Restart your printer and router by removing power to them for 30 seconds.
Similar Messages
-
My power went off and I have lost a word file I was working on. Was this file saved automatically anywhere where I can retrieve?
It may have been if you had autosave activated. I've never had that happen so I don't know where the file is put. I would expect Word would ask you if you wanted to retrieve a saved version when you next started it in those circumstances.
-
My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds… Can anybody help? Has IOS7.0 but not the most up-to-date version
It's just the battery sign - nothing else. I've tried to reboot by holding down both power and home key for 10+ seconds, waiting for the apple logo - but nothing happens. It's plugged into the imac at the moment. I tried to recharge it overnight using the normal charger - but no luck. It went dead during a Skype call with a friend - even though it was powered into the mains - albeit at a low battery level at the time
-
My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
New pc running on Windows 8.1 and OfficejetPro L7480 but the printer won't scan.
Have new pc running on Windows 8.1 and OfficejetPro L7480 but the printer won't scan. It will print via usb and I've downloaded the full drivers Full_win_WW_140_408 but won't install. I've also tried to install the original drivers but they were for windows XP. The printer is approx 7 years old but still works (or did!)
Hello RevPhil,
Welcome to the forums!
I noticed your post about your printer not installing properly for you on your Windows 8.1.
I would suggest trying to use the HP Print and Scan Doctor to install the printer.
If that doesn't work, please let me know what exactly happens when you try to install, for example, do you see an error message or code? Does the installation stop?
Have you tried installing both USB and wireless methods?
Hope to hear back from you shorly!
Enjoy your weekend,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
I keep putting in my passcode but my iPad won't show the numbers in the blocks and consequently it won't open for me. I have tried double tapping in the numbers and then it shows the numbers in the blocks correctly but then it responds with a wrong code in red and then locks me out.
Typing in the code takes a long time which might indicate a full HD.iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
The power in the house went off and now that's it's back on, I can't turn my mac on.
The power in the house went off and now that it's back on, I can not get my iMac to turn on. I have tried pushing the "on" button located on the back of the computer but nothing is happening. What am I missing? How do I turn it back on?
Thanks in advance for your help!try doing SMC reset, the following article tells how:
http://support.apple.com/kb/HT3964
also try this article
http://support.apple.com/kb/TS1367
tells how to troubleshoot mac won't turn on
good luck! -
My colour and colour settings options are 'greyed out' on my Epson printer pane since updating to Yosemite and CS6,this happened before after running a software update on the printer driver! The driver version at that time was 6.62 and now it has updated to version 9.00....could this be the problem??
That's strange ... did you try restarting before printer install? You also may need to delete the printer itself (System Preferences > Printers & Scanners) and add it again , in order to access the proper drivers (?)
Can you show screen shot(s) of your incomplete print dialog? -
My iPad won't let me stay on some games and web sites for more than a few minutes . It closes the site and takes me back to home screen. Why and how do I fix this?
For Safari you could try clearing its cache and history via Settings > Safari.
For Safari and your other apps you could close them all completely and then see if they work when you re-open them : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
My Ipad won't let me in when I try and slide to unlock it ...the message is Not Enough Storage...but I can't get in to put more storage on it
Settings > iTunes & App Stores > tap your Apple ID: > View Apple ID > Country/Region
If you find that it is set to the correct region, log out of your iTunes Store account, restart your iPad, and sign into your account again.
Hope this helps.
Regards. -
The power went out and when it returned the network name and password was lost. I can see the network in my connections and connect to it. How do I get it back to the orginal name and password? I have an HP laptop.
Chances are, there was a signficant power surge or voltage fluctuation just before the power went out. This type of thing can cause the AirPort Extreme to reset back to default settings.
If this occurs, your only option is re-configure the device again, just as you did originally.
In order to improve your chances this next time this happens, (especially if you live in an area where thunderstorms are severe), a good quality surge suppressor / voltage limiting power strip will really help, and may save you the entire device or a nearby computer next time something like this occurs. -
I can't get my Mac to turn on? Our power went out and it is now unresponsive.
I can't get my Mac to turn on? Our power went out and it is now unresponsive. I have tried the usual way to power it up but am not getting anything. Does it need to be reset?
Which Mac model?
When you say not getting anything - do you mean no sounds, beeps, etc?
It is possible that your Mac's motherboard or power supply are damaged.
Check this (read through the symptoms first):
http://support.apple.com/kb/HT3964 -
Since upgrading to lion and updating HP software my printer ( HP photosmart D5160 driver 3.3.0) will not print to CD/DVD,when I try it says "your printer does not support CD printing". any help will be welcome.
I see those are old posts above but I'm just now having the same problems. I have the original software CD that came with my Photosmart D5160 printer but I can't load it. I get the message "You can't open the application "HP Installer" because PowerPC applications are no longer supported". So I don't have that going for me, which is not nice! But I couldn't really care less about that if I can just find a CD labeler software that will print from my Mac to the D5160. I'd rather by new CD labeler software than a new printer. I've tried a few free CD labeler software downloads, including iWinSoft Label Maker, but nothing has worked so far. I think there's an answer somewhere; I'm able to print documents on regular paper using this printer, but I only bought it (many years ago) to print CD labels and some pictures. It's been used only sparingly and it's been in storage since I bought my Mac 3 years ago, mainly because a I got a free printer with my purchase. Any help is vertainly appreciated!!!
-
My sister spoiled water into my macbook pro and the power went off in two seconds. I took off the cover and dried the water with tissues. Still it doesnt work. What do i do?
Do you mean when the water was spilled on it, it shut down? That would indicate a major internal short occured.
Really, I'd say you need to take it into Apple or an Apple authorized repair center and get it looked at. Odds are you've got a significantly damaged device that will require professional repair and parts replacement to get working again. -
hi,i was about to update my software version of i phone 4,but suddnley power went off.now my phone is not recognised ,and my phone doesn't work,how to reinstall operating system,please help me.....
Put the device in DFU mode: http://www.iclarified.com/entry/index.php?enid=1034
Maybe you are looking for
-
How to determine the Host a VM runs on, if VM is 2012
Morning all HyperV host on Win2012 (standard, not R2), guest is the same. Time was, you could query HKLM\SOFTWARE\Microsoft\Virtual Machine\Guest\Parameters\PhysicalHostName on a VM to find out the name of the host it was running on, and this is hand
-
Creating new "Collection Set" deselects everything for no reason.
In Library mode: Creating new Collection Set performs "Select none" (changes source) for no reason. A new set cannot contain photos (until it has a collection) so there is no reason to change source to it yet. It is behaving as if it were a new col
-
PSCS5 64bit, Windows 7, 8 gig, essentials workspace missing, no error messages; it's just not there. I have the latest patches/updates. Was there before. I had been doing some Deke tutorials on Lynda.com changing keyboard shortcuts but I don't kno
-
Why doesn't the iPhone 4s charge to 100%?
Why doesn't the iPhone 4s charge to a full 100% when charing over night?
-
Hi I just installed NWD Studio 7.0.9 and it takes about 5 minutes or more to come up compared to 2.0.18 which was almost instantly Anybody have any idea what the reasoning is for that. Also there is a new option called NWDS Console. I'm looking for