IPad won't restore, Errors 9, 21 and 1611

My iPad boots into recovery mode but won't restore. On my windows 7  PC i get errors 9 and 21, on my XP machine i get error 1611. I have tried DFU mode, uninstalling all apple software then re installling it, a diffrent USB cable and a diffrent usb port. but still no luck :/. When i attemt to restore, on the iPad screen the progress bar shows for about a second then the screen goes black like it just powered off, however, it shouldn't since the battery holds a good charge. please help, i've been trying to fix this for hours now. Thank you

#9 is loss of USB connectivity, the other two are security software errors. Sounds like you may have third party security software that is not allowing iTunes to connect.

Similar Messages

  • Attempting to restore ipad, recovery starts and then quits with msg saying ipad cannot be restored, error 3014

    attempting to restore ipad, recovery starts and then quits with msg saying ipad cannot be restored, error 3014

    Try the troubleshooting on this page : Error 3194, Error 17, or "This device isn't eligible for the requested build".

  • My 1st generation iPad won't restore

    My first gen ipad won't restore. It won't turn on, it won't turn off, it won't show the apple logo when I try to put it in DFU mode, and it won't show the 'connect to itunes' symbol. Basically it won't do anything that all the trouble shooting tips suggest!
    When I plug it into the mains via it's charging dock, it flashes the apple logo every 10 or 15 seconds, but when I plug it into the mac it only manages to flash very weakly every 5 seconds or so.
    After many attempts, I managed to get itunes to recognise that there was 'an ipad in recovery mode' but every time I tried to restore it, I got the message 'unknown error 1602' and when I looked this up, it basically said it was the same as about 10 other error codes and that all I needed to do was change the USB port and/or restart itunes and/or the mac and it would all be good.
    I did all of these things several times and in various permutations but to no avail.
    I'm not 100% sure of the operating system on the ipad (and of course I can't check at the minute,) but I'm sure it's iOS 5. something! (I did update regularly, or when prompted by the system, but haven't done it in a while because my wife uses it now.)
    My itunes is up to date - Version 11.0.1
    I know it's a long-shot but can anyone help?
    Thanks
    PK

    I have a similar problem. But my iPad shows the connect iTunes screen and gives error 2001 when I try to restore it.
    My iPad's battery was fine but I didn't use it for like 2 weeks. It's battery would've discharged and it turned off. When I tried to charge through wall socket, it got into the restart loop where it would show apple logo and turn off. So I did the simultaneous holding of Home and Sleep buttons for 10 seconds or more. It started showing connect to iTunes.
    When I try to restore, the iTunes does the usual "extracting file" or something and go upto preparing for restore. But the iPad screen turns off from "connect to iTunes" and iTunes gives the error 2001, and the screen is back to connect to iTunes.
    Also, if I don't plug in, the iPad seems dead, doesn't wake up or anything.

  • Refurbished ipad won't restore

    refurbished ipad won't restore or start up.  Only have had it for 2 weeks.

    If the above fails you can download a free programme called Recboot. Follow the simple instructions and it will kick you ipad out of the recovery mode and bring it back to normal. I jave just used it myself as mine was stuck in recovery mode due to a corrupt back up file.

  • HT1430 ipad will not restore - error 4014 not found on website

    ipad will not restore - error 4014 not found on website - will not turn on for hours

    Take a look at this thread. Several solutions are offered.

  • HT4061 iPad 2 gets activation errors in FaceTime and messages,plus Facebook app opens and then closes

    iPad 2 gets activation errors in FaceTime and messages,plus Facebook app opens and then closes

    Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
    Use the wall-mount charger that came with the iPad and charge overnight.  Do NOT use an iPod/iPhone charger.  Do NOT use a computer's USB port.  Then, operate it normally until auto shut-down (ignore any low level alerts that may appear).  An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
    I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know.  If the above test does, in fact, indicate a problem, read this.
    Also, according to Apple:
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

  • IOS: Restore errors 4005, 4013, and 4014

    Facing IP4S always power bling bling also during type text a few miniute back to unlock.
    Try Syc and restore BUT error iOS: Restore errors 4005, 4013, and 4014

    How did you try to restore?
    Try all options described here:  iOS: Not responding or does not turn on
    If necessary, back up your device try to restore as a new device to factory settings:
    See Use iTunes to restore your iOS device to factory settings  http://support.apple.com/kb/HT1414

  • HT201263 iPad won't restore, shows apple logo, won't restart. Battery is low but won't recharge. Is it a sudden loss of battery function?

    iPad won't restore, shows apple logo, won't restart. Battery is low but won't recharge. Is it a sudden loss of battery function?

    If you were restoring to a backup or resetting back to factory defaults, then have you tried recovery mode : http://support.apple.com/kb/ht4097 ?

  • My ipad won't restore and i keep getting error code -1

    itunes indicated a problem with my ipad today and suggested restoring the ipad. THe ipad is now in receovery mode and is trying to be retored. While going through that process, it seems that it won't update more than 15% before stopping with the following dialog box popping up:
    The IPad "IPad" could not be restored. An unknown error occured (-1). I have changed USB ports, rebooted my computer, turned off the IPad and the result is the same every time.

    Hello Darryl Drohomerski,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694#error-1
    Error -1
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
    Best of luck,
    Mario

  • TS3694 Ipad won't turn on at all, and is recognized by itunes as being in recovery mode- when I try to restore it stalls on the portion stating "preparing device for restore" and on the page it says "itunes is restoring the software." Been like this for a

    Ipad 4 won't turn on at all, and is recognized by itunes as being in recovery mode- when I try to restore it stalls on the portion stating "preparing device for restore" and on the page it says "itunes is restoring the software." Been like this for a day. I read the restore notes on apple, but this seems to be a little more unique than the standard recovery issues. Any ideas as to why I seem to keep stalling during the restore process?

    Couple of things I can think of before going to the Apple store.
    First, if you can, power off the iPad. Then connect it to the charger that came with the iPad and plug that into a known good wall outlet. Leave it there at least an hour then try to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
    Also, you mentioned you have the latest iTunes. But it would be good to check the actual version. If the iPad is running iOS 7 you need iTunes 11.1 or later.

  • Iphone 4s stuck in recovery mode and won't restore. error code 9

    My iphone 4s will not start past the apple logo.  When I try to restore using itunes, it will not restore, and I get error code 9.  I have tried different computers and USB ports with no luck.  Any other suggestions?

    Hello pradacxnt,
    Do you get an error code when you are trying to restore your iPhone? If you do, then check out the article below to isolate and resolve the issue.
    Resolve iOS update and restore errors
    http://support.apple.com/kb/TS3694
    Regards,
    -Norm G. 

  • IPod Won't Restore Error 3194

    The iPod won't restore an when i try to restore my iPod in comes up with the Error 3194, from what i can call the error apppears when it says verfiying with apple i have tried changing host, no luck.

    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    Above from:
    http://support.apple.com/kb/TS3694#error1601
    Try tis:
    3194-How do I reset the hosts file back to the default?

  • HT4097 ipad cannot be restored error 3194

    My daughter's ipad has been disabled because she cannot remember her password. When I go to restore it while in recovery mode, it gives me an error saying that it cannot be restored. What do i do now?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT201442 My iPad won't restore via iTunes, now it won't even turn on!!

    I've followed their support but it's still not worked.
    Since I bought the iPad I've never plugged it into my laptop (Windows 7), until this morning when I wanted to put some photos onto there.  So when I plugged it in it did a stupid set-up thing I couldn't "skip" because it thought it was a new iPad.  It needed an update so I clicked update - it wouldn't do it because there wasn't enough memory and now It's saying I need to restore it (recovery mode).
    I click on the button to restore it and it comes up with, "The iPad "iPad" could not be restored.  An unknown error occurred (3194).
    I am REALLY ANNOYED as I can't use my iPad at the moment, and when I click on restore it says that all data on the iPad will be lost (so Im not happy about that at all!!!!)
    How do I solve this, I've followed all their support steps, but it's still not working.  There is no local apple store by me either - I live in the middle of no where and study full-time and work part-time, so am unable to travel to the nearest store during their opening times as they clash with my hours!!!
    PLEASE HELP!! 

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • Ipod classic won't restore error 1439 appears in itunes

    my ipod classsic has entred disk mode after dropping it but it won't restore an error 1439 appears in itunes. what can i do or would buying another ipod be better

    Hey chjesc,
    I have an article for you that addresses this error code and may be able to provide you with some further information regarding this issue:
    iPod: Can't restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
    http://support.apple.com/kb/ts1372
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

Maybe you are looking for

  • New computer & syncing multiple apple devices without erasing

    We've just got a new family PC and have about 7 Apple devices we manage with iTunes, I've read the support forum and do I really have to trash every device and copy data to/from it again so sync works with the new PC? This seems like madness if this

  • Marketing Loan Backlog Report

    Hi Experts, I required help on the following process which we follow for issuing out loan items to our customers: We are distributors of IT products selling to dealers, any time a new product is launched in the market we need to provide few top custo

  • T codes with similar functions in AP and AR process

    Hi, I need  list of T codes which has similar functions in entire AP and AR process. Thanks SM

  • 11.2.0.3 database upgrade to 12c

    I am currently doing a database upgrade from 11.2.0.3 to 12.1.0.2. The server has a number of other 11g database instances which have not yet been upgraded and the listener on teh server is 11g. Should i be creating a 12c listener for the upgrade i.e

  • Printing in servlet's init() method

    i am trying to print out some information in init() method, but i can not create a 'response' object of ServletResponse to print with out.prinln() method for displaying these information in browser. please help me for working it out. i have given cod