IPad wont power off after upgrading to 4.2.2

Merry Christmas,
Just took our new IPAD out of the box, plugged it in and ITunes want to update it to 4.2.1 from 3.2.
After upgrading it, the power button at the top will not work. Holding it in for many seconds results in nothing happening. I have tried to restore it to factory defaults, but nothing seems to help.
To be honest, I am not positive if the button worked correctly at all.
We did purchase 2 IPads and the second one upgraded to 4.2.1 correctly.
Any suggestions?
Chris

I did try what you suggested. However that did not correct the issue.
Downloading the manual now to check page 170
Just finished downloading the manual, I have tried everything that it suggests.
I'm at a loss as to what to do. Hopefully, its not a hardware issue.
Is it possible to revert back to IOS 3.2.2?
Message was edited by: Chris Joles

Similar Messages

Is it better to "lock" or "power off" after an Ipad 2 use? Why.?

Is it better to "lock" or "power off" after an Ipad 2 use? Why.?

A locked iPad is sleeping and will be usable much faster than one that has to be powered up. The sleeping iPad uses very little power, but it uses a few percent of the battery.

My ipod is disabled and wont power off

My daughter forgot her password for her ipod and now its disabled and wont power off
I have google and youtube and none of the suggsetions worked
Please help!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

TS3274 how do I get my iPad to power off. It just keeps spinning.

how do I Get my iPad to power off? It just keeps spinning.

Try here:
iOS: Not responding or does not turn on
If not successful, let the battery fully drain. After charging for at least an hour try again.

Help, my ipad wont turn off and the screen is blank with the circle that goes around and around. Should i let the battery die? Was I hacked?

Help! My ipad wont turn off and wont open a screen. Just blank with the circle going round and around. was I hacked? Should I let the battery die? I am lame at this stuff.

Have you tried holding down the power and the home buttons until the slider bar shows up to shut down the iPad?

Syncing iphone and now phone is stuck and wont power off or do anything

syncing iphone and now phone is stuck and wont power off or do anything

Reboot the phone: hold down the power button and the home button at the same time until you see the Apple logo. Ignore the "slide to shut down". When the screen has been completely black for a few minutes, press the power button again.

Bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?

bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?
I'm trying to use the iphone as a remote with keynote, which again worked before the upgrade

Hi russellpaton,
Thanks for visiting Apple Support Communities.
If your iOS devices are not communicating with each other after updating to iOS 8, the troubleshooting steps in this article can help resolve this sitation as well:
If you can’t use a Bluetooth accessory or car kit
Cheers,
Jeremy

What can I do if I get an internal power error after upgrading to Windows 10?

QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
First, you'll need to quickly set the boot options to Safe Mode:
1. Hold the Windows key and press 'R' to open the run box.
2. Type MSCONFIG, then press ENTER.
3. Select the BOOT tab.
4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
5. Click Apply, then OK.
6. Click Restart. (If prompted, click Restart anyway.)
From Safe Mode disable the AMD Display Driver:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Disable, then click Yes to confirm.
7. Click Close.
8. Hold the Windows key and press the 'R' key to open the run box.
9. Type MSCONFIG, then press ENTER.
10. Select the BOOT tab.
11. Uncheck Safe boot.
12. Click Apply, then OK.
13. Click Restart. (If prompted, click Restart anyway.)
From Windows 10 started with the AMD Display Driver disabled:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Update Driver.
7. Click Search automatically for updated driver software.
8. An AMD driver should be found and installed.
The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

I'm having the same problem. I got error message 21. I went to apple store. they are saying i have a hardware error. Really, my phone was working before the update. Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child.
Help please,
I will be glad to go back to the older software update

Some songs i had on my ipad dont play anymore after upgrade to io7, a small red symbol comes on the right side, could please explain why and give me a solution, thank you

some songs i had on my ipad dont play anymore after upgrade to io7, a small red symbol comes on the right side, could please explain why and give me a solution, thank you

Miracle!!!!!!
The iOS 7.1 update solved the WIFI issues on my iphone.
I'll try to upgrade my ipad later on and then
I think I can sell my hairdryer and my freezer.
Thanks to the people @ infinite loop ;-)

HT4623 ipad wont power up

ipad wont power up

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Mail has to be forced closed to power off after maverick upgrade

After taking the maverick upgrade to power off the computer I have to force close mail. Not a huge deal but wondering if there is a setting I don't have right. I'm pretty new to this mac world...less than a year...so I'm still learning. Any suggestions would be appreciated.

Odgenite,
Please first complete your profile, if you don't know how please click Profile Update for instructions.
The first thing to do is restart in Recovery Mode, open Disk Utility and run Repair Permissions 2x. If you don't know how to start in Recovery Mode then hold down the Option key when you hear the startup tone and you will see what partitions to start from. Choose Recovery, then open Disk Utility. After running Repair Permissions 2x restart normally and re test. If this does not work then open in Recovery Mode again this time reinstall OS X, this will leave your data alone however it is ALWAYS wise to backup your data prior to doing any update or upgrade.

IPad 2 Wifi Problems after upgrading to iOS 6

I Updated my iPad 2 to ios6 then day iOS6 was released, ever since then i have been unable to connect to the wifi. I've reset the network setting and the wifi works for about 5 minutes until i go on any apple app ( itunes, app store, maps etc). I've reset the Network settings more than once, I've turned the HTTP proxy to auto, I've pressed Renew Lease, I've unplugged the wifi, and I've pressed Forget this network. Reluctantley i updated my ipod touch 4 gen to see if iOS 6 was the problem and I now have the exact same problem on my ipod touch. Someone Help!!

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Photosmart D7460 wont power off

My D7460 sometimes will get into an endless loop and just wont do anything at all. I can't power it off, get it to print anything, if I sent something to the printer, etc., etc. This has happened to me a few times already and the only solution is to unplug the power cord. But, when I do this and, after a few minutes, plug it back in I get a message on the screen saying that it was shut down incorrectly, which could ruin it. How should I be handling these situations if unplugging it could ruin it???

"Won't allow?" What happens when you slide?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

HT1947 Remote app on iPad no longer rotates after upgrade to iOS 7

I love Remote, use on both my iPhone and iPad. However, after upgrading the iPad to iOS 7, the app no longer rotates to horizontal view - in fact, it doesn't rotate at all. Bad enough no horizontal, but to not rotate at all means that I can't orient my iPad angled up, while having the power cord plugged in at the bottom?
Seems so strange that this would be changed - why? Maybe I need to re-install?
Help.
Thanks,
Bruce

same issue iphone 4

Wont power off or slide to power off

Ipad 2 will not power off holing down off button- screen pops up to slide to power off and wont allow

"Won't allow?" What happens when you slide?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

IPad wont power off after upgrading to 4.2.2

Similar Messages

Maybe you are looking for