Ipad wont send messages but receives ok. Text in bold send button wont send

recently updated to 8.0.2. My ipad wont send messages, the typeface has gone into bold and the send wont work.

Hi TP07B,
If you are having an issue with sending messages from your iPad, I would suggest that you troubleshoot using the steps in this article - 
iOS: Troubleshooting Messages
Thanks for using Apple Support Communities.
Best,
Brett L 

Similar Messages

  • BBM not sending messages, but receiving messages, weird

    hi,
    I have a bb torch 9800
    The bb messenger was working fine till today, I can't send any messages via it.
    I've tried deinstalling the application, installing it again, but it didn't help.
    I've also removed the contact, added the contact again, still it didn't help.
    All messages keep timeouting and then a red cross is being displayed.
    Any ideas how to fix this, pls?
    Thanks, br,
    Dan

    I have been having a similar problem. I currently have a blackberry curve 9320 and my BBM doesn't seem to be working propely. The problem is, everytime i try to send a message to a contact my messages would not send, it only shows the checkmark (tick) with no 'D' or 'R' and my display picture doesn't change either and my personal messages will not update. However i can see all of my contacts updates and am recieving messages from them. I have already tried a battery pull many times, i've uninstalled and re installed BBM, i've registered on host routing and have sent a service book, but nothing seems to work. This has been going on for more than 3 days now and i really would like my BBM back to normal. If anyone knows the solution to this, please help me as i really want my BBM back to normal asap!!! Thank you.

  • My iPhone 5s will send messages, but not receive them. Replies show up on my iPad. How do I fix this?

    Anyone know how to fix imessage and FaceTime issues with iPhone 5s?  I can send messages, but replies only show up on my iPad, not my phone. Can't FaceTime at all, just on iPad.  Says "waiting for activation". Or "Activation unsuccessful. Turn on iMessage to try again."  And a screen comes up "iMessage Activation. An error occurred during activation. Try again."  If I try to log in with my Apple ID, it doesn't work, either. Same problems for FaceTime.
    I have tried all the "fixes" I found on another thread, nothing worked. This is a replacement phone. My first one had problems with the touchpad not working, but the messaging and FaceTime were fine. The touchpad works on this phone. Any suggestions?

    Fixed!! My cellular/internet provider had to do a restore and now it works

  • I' m not able to configure email. I can send messages but I can't receive them

    I need your help.....I'm not able to configure email....I can send messages but I can't receive them

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • I'm having some problems wiht Firefox, for example; Youtube isn't loading right, Facebook won't let me send messages, search up people, and this website i made wont load right also. I've re-installed and updated it but still the same problems. Any help?

    I'm having some problems wiht Firefox, for example; Youtube isn't loading right, Facebook won't let me send messages, search up people, and this website i made wont load right also. I've re-installed and updated it but still the same problems. Any help?

    Because I know enough to be dangerous...  I was trying to extend the two outside columns down....  Instead of just using faux columns which I have fixed since I posted the question.
    The other link problem is the left sidebar links.  When you go to the event photos page I have a repeat of the sidebar links that are on the newsletter page.  I used named anchors on the newsletter page to link to the particular article.  From the Event Photos page the links look like this:
    <a href="1112Visions_Iss1.html/#puzzle" target="_self">[Puzzle]</a>
    The problem I am having is that some of these go to the newsletter page and the anchor and some do not (I get an error message saying it  can't find the page).  To add to the problem is that when we choose say the President's Message, when it goes to the newsletter page and the correct anchor, the newsletter page is missing all the links to the graphics... the photos are missing the graphic for the faux columns is missing.  It makes no sense.  When I preview the newsletter page from Dreamweaver everything shows up fine.
    I do not know if all of this is being caused because I haven't posted this stuff to the site or what.  I've tried re-booting both the browser and Dreamweaver, dumping the cache and still the same nonsense.
    Got any ideas?

  • I have full signal and have wifi but I'm can't send messages or receive them. I can't make phone calls either.

    HI
    I have full signal and have wifi but I'm can't send messages or receive them. I can't make phone calls either. it picks and chooses when I can receive them and make calls. It only works everytime I turn my phone off.

    Try turning on Airplane mode for a little bit (20-30 seconds) and turn it back off. see if that doesn't allow you to re-connect.
    In my current project my office receives no signal at all. I have to do this almost every time I leave the office in order to get a signal.

  • My i phone 4 will send messages but does not receive them - why?

    My i phone 4 will send messages but does not receive them - why is this?
    e mail works both ways

    Did you already check the general troubleshooting for messages here?
    http://support.apple.com/kb/TS2755

  • I can't send messages but I can receive them

    I can't send messages but I can receive them, is it an iOS 7.0.3 issue or Verizon Wireless? Also not receiving data

    Hey Bonaccio,
    Thanks for the question. I understand you are experiencing issues with Messages on your iPhone 5. The following resource may help to resolve your issue:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    I also understand you are experiencing issues with your cellular data connection. These two issues may be related, so definitely give the steps in this article a go:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
    1. Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
    2. Restart your iPhone.
    3. Ensure that your software is up to date:
              - Check for a Carrier Settings Update. Tap Settings > General > About.
              - Check for an iOS Software Update. Tap Settings > General > Software Update. Note: Some updates may require a Wi-Fi connection.
    4. Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
    5. If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
    6. Try another location. If a different location works, but the original location still does not, contact your carrier to report the issue.
    7. Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    8. Restore the iPhone as new.
    9. Contact your carrier to:
              - Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
              - Verify that there are no account-related blocks.
              - Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
    If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
    Thanks,
    Matt M.

  • HT4245 can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, not

    can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, its not working....

    Please Rephrase your query.

  • I still have the most updated version of ios 6 and my messages on imessage no longer sends. It shows the sending message, but then it just disapears and nothing happens.

    Out of nowhere my imessage stopped sending messages, but I have ipod 4 and i can't update to ios 7, but I can't send messages and I don't have the right coverage to talk to real apple employees. Please help.

    iOS: Troubleshooting Messages

  • Can we send message to receiver depending on another receiver

    Hi,
    I configured two receivers(different target strcures ) without BPM.now i need to send message to receiver 2 if  receiver 1 message sucessfully processed .
    can we handle?

    Hi,
    I would use the Enhanced Receiver Determination
    http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm
    This is very flexible.
    Regards Mario

  • TS3899 my iPhone 5s won't send email but receives email fine

    my iPhone 5s won't send email but receives email fine

    Hi Robgt8,
    Thanks for visiting Apple Support Communities.
    The steps in this article can help with troubleshooting your iPhone 5s is email will not send:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Cheers,
    Jeremy

  • I am having trouble sending an i message after I type text in the field. The "send" button does not turn blue. Help!

    I am having trouble sending an i message after I type text in the field. The "send" button does not turn blue. Help!

    Do you have something entered in the Subject field?

  • HT3529 I send messages but the receiver is sent empty texts

    My mum send messages to her contacts and all but one doesn't receive the message and the one who doesn't receive the message is using an iphone 4 and she uses an iphone 5

    Is she usign emoji? If so, see what happens if she doesn't.

  • I can send messages but not receive.

    My iChat used to work fine. For some reason, however, now I can send messages that my buddies can read but do not appear in my chat box after I hit send. I can no longer read any messages my buddies send to me. I also cannot see chat room invitations that are sent to me. My Mac store people tell me they can find nothing wrong and it "works fine" when they use it. I thought perhaps it was my user account, but I can use iChat at work and on my husband's iMac with no problems. All the settings seem to be identical. I thought about setting up another AIM account, but my original works fine on the other computers.
    Oh, I am able to video chat with my husband. It seems to be only the text chat that does not work.
    Any ideas or suggestions?

    Hi,
    Chats that do Text Chat and then send files or Pics in the chat change it to a Direct IM
    This changes the Protocol iChat uses to send and receive data on.  (It swaps from port 5190 (Or whatever login port you have set) on TCP to using port 5190 on UDP)
    This means you have to have port 5190 open on your router to the UDP protocol.
    (Of course it has to be opened in such a way that two computer can use the port and protocol at the same time. (UPnP is method of choice)
    Group chats also use port 5190 on UDP
    This would seem to be the most likely thing with what you list about the account and the Computer working at a Store  (I take it they tested Your iChat Account there ? (testing their own account would prove very little)
    11:20 PM      Wednesday; August 10, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for

  • Date - Java

    Hello All, while inserting a record into the database...i have a requirement to insert today's date in one of the column ... and I'm doing something like this : stmt.setDate(1, new java.sql.Date(Calendar.getInstance().getTime().getTime())); but getti

  • Click-through links which would otherwise open in new windows, wont open at all

    it may have something to do with the fact that i have a new laptop running windows 8 but on links which would normally open into a new window like document links or page editors won't open at all. pop-ups are allowed, and i've tried to allow new wind

  • How to insert a Flash SWF into my page

    I am using GL6 on an Intel MAC running 10.5.6.  I have a Flash file I created using Flash CS3 and want to have it appear within my GL page.  However when I try to insert the file into the site window, I get the error message: myfile.swf could not be

  • Input-Parameter to message mapping missing

    Hi, I have an interface on 7.1 where i use a RFC lookup, and sets the channel using the parameter functionality. After upgrading to EHP 1, the parameter has gone missing on the production system. It is on Dev, but when I try to transport it again, it

  • W2338h scaling doesn't work for 1600x1200

    I have a w2338h. 1024x768 and 1280x1024 display as I want them to (square), but 1600x1200 stretches to fill the monitor, and I can't change it. I see Custom Scaling/Fill to Aspect Ratio, but it doesn't actually do anything - both settings look the sa