IPAD1 and home computer loses wireless connection since i upgrade to 5.1.1.

I have an iPAD 1. Can't complain as it was given to me.
I have a Dell home computer (not an Apple) and I have a Linkys wireless router. (I don't always know the right computer lingo, so I apologize upfront).
I only use the Wireless on my iPAD. Its a 32G with 3G but don't use a plan only the wireless.
All has been going great for the last 2 months. Loving it.
Well...until last night and I got a pop-up on my iPad that asked to download to IOS 5.1.1. So, I did and it all went well.
For about an hour. Then I could get a connection.
So, here's where my problems started. I got on my home computer to start looking for advice and my home computer wasn't working too. So, I got out my trusty Blackberry (it's provided from my employer) so I search on there. It said to disconnect the router. It also said on the IPAD to reset network. So, I did both and both iPAD and home computer got back the connectivity.
I checked my AOL and Facebook on my iPAD this morning for a couple of hours. Alll was good.
Then this afternoon, I was connected then wasn't. So I got on my home computer and it lost wireless too.
I've been messing about research trying to figure out what I did wrong and it seems like there are some bugs in 5.1.1.
I thought maybe I could downgrade but it looked a little tricky.
Can anyone out there tell me what to do?
P.S. I don't download iTunes but I would like in the future maybe to watch a movie on the iPAD and I download books and I'm trying to figure out how to sync with my Kindle Touch.
So many things for a senior citizen to be trying to figure out. (ha!)

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

Restarting the computer and re-establishing the wireless connection

I am a wireless newbie. I just got a g router and established a secure wireless connection. When I restart the computer it seems like I have to reestablish the wireless connection with a wired connection before it will log me in to my wireless connection. Is this what happens? Also, now when I try to "view available wireless conncections" it has my SSID but since it's secured I need a password of some kind to access it. I don't recall signing up for a password so I don't know it. any help would be greatly appreciated.

Hi…I would suggest you to login in the router setup page from your wired computer, through internet explorer by typing in 192.168.1.1 in address bar > skip username and > enter admin as password. Click Wireless Tab > second sub Tab Wireless security, you will find your wireless network key or wireless password that you need to enter on our wireless computer while connecting to your wireless network. Once you get connected to your wireless network it will not ask you to enter your wireless security code or password even if you restart your computer.

If I have iPad1 and if I lose it or brake it and buy a ipad2 can I restore all the thing I had through the computer if so how

If I have iPad1 and if I lose it or brake it and buy a ipad2 can I restore all the thing I had through the computer if so how

Depends on several factors.
For one, all the apps you've bought can be re-downloaded and synched, so that's not a problem.
However, certain content that's created on the iPad may not. In order for this to restore you will need to have synched your iPad, either with iCloud or with iTunes running on your desktop computer.
If you've synched with your desktop then you can restore the iPad back to the last sync.

I am unable to stream Netflix to my Iphone or Apple TV, from my wireless router . . . even though I am able to watch Netflix on my WII (also wireless) and desktop computer (not wireless).

I am unable to stream Netflix to my Iphone or Apple TV, from my wireless router . . . even though I am able to watch Netflix on my WII (also wireless) and desktop computer (not wireless).
On the Iphone and Apple TV I can connect to Netflix . . . it recognizes me and my account settings . . . and I can veiw all my recent programs and show titles, descriptions, etc.. But when I select one to watch I get a message saying:
"ERROR A PROBLEM OCCURED WHILE PLAYING THIS ITEM. TRY AGAIN LATER, OR SELECT A DIFFERENT ITEM. GO TO WWW.NETFLIX.COM/SUPPORT FOR MORE INFORMATION. (139)
Netflix support say there is nothing wrong on their end . . . that it is an Apple issue. They see the request for the show, the devices are registered . . . but it shows 0 bandwidth to the device.
My Apple TV did this when I first hooked it up a couple of weeks ago. Then after a few days started working with Netflix, for no apparent change . . . now doesn't again for the past couple of days (I think that it auto restarted the other night after a virus scan).
Very frustrating, and driving me nuts! Has anyone else had and been able to resolve this problem?

Troubleshooting
Apple TV2 update one day and netflix is browsing but not launching the actual content (error 139)
Ipad2 (another ios device) forces me to update netflix if I want to use it and I get the same error 139 on it.
**** now I have two not ways not working where prior to some update it was fine.
Nintendo Wii is still working ( mind you running an ancient version of netflix ) Dusted the Wii off and gave it to the kids use. Now they are happy again...
PC is also still working ( using some other flash client ) but that's just of interest, we're not going to be watching tv with that.
My wife's iphone 4s is still working. Odd.. still ios but for somereason I am not forced to update the version. So basically she could mirror stream up to the apple tv with it. Nice feature of Ios5. Later found out it is using 1.4 version of netflix. The most useful thing out of that is that all 3 of the devices are Ios and it was actually the iphone with the 1.4 version of netflix that still worked!
I heard from a friend who was on a different ISP he was still working so I took my appletv2 and ipad2 over to my brothers house who is on that same ISP as my friend and both started working. So the ISP is involved too!
Brought the appletv2 and ipad2 back to my house hoping it would maybe still work. No dice Broken again.
Searched the appstore for a decent packet analyzer and there isn't really anything. I was able to sniff the traffic with my PC and also on my juniper ssg5 confirmed that. Turns out port 80 traffic is actually failing and authorization is not happening. The other clients do not do this...
Asked a buddy from work who used to work at the ISP if he could make a call to some one who might actually know what is going on. He came back pretty quick and said yea they are trying really hard to get the beta patch in from Bluecoat asap.
So knowing that it was actually Netflix that changed when it hit 2.0 and in my case the ISP made the adjustment it's pretty safe to say this issue is going to be ongoing unless netflix changes again the way they authorize for licenses.
So that's the summary of what went right down the troubleshooting path but I'll tell what what didn't
2 calls to Netflix (useless... waste of time... they are too quick to blame anyone but themselves)
1 call to apple support (support call was going to cost more than it cost for me to change ISPs)
2 calls to ISP (through the normal means - regular support number)
So why is this intermittantly working sometimes? If you are lucky enough to authorize to an IP address that is not cached they voila you are going to get an authorization / a license to watch the show. Some people report after defribulating their appletv (reseting, rebooting, dns changes, you name it) they get it working. Over the past month we all seem to have got it working for some period of time only to lose it a day to two later.
It's now been several days since the beta patch to the bluecoat and 4 of us who have been communicating on the issue appear to be online all at the same time for those several days and that is a good sign that we might be out of the woods on the issue.
Hope this turns into something helpful for someone else out there.

New 6500 E709n loses wireless connection when it or laptop sleeps... & other problems!

Just got this printer and am hoping we can get it to work because we really like it. I believe we've done everything right - it is connected to PC via USB, and to laptop via wireless network. Both computers are Dells running XP. Our wireless router is a Linksys Wireless-G WRT54G. We installed the disk on both. Immediately after installing on the laptop by plugging in USB and then unplugging, we were able to get it to work. We printed and scanned from both . . . UNTIL the printer went into power save mode.
When it sleeps it loses all the network connections (but will still print from PC). Even the icons disappear from the laptop after it sleeps. The only way to get it to work with the laptop again is to start all over, plug in the laptop, enter the WPA key again, and so on. Then it's finebut for just a short while. Now, when I registered my protection plan, I was on the phone with a techie guy and asked him if it's normal to have to keep entering the key every time you want to print, and he actually said that maybe I shouldn't let the printer sleep - wow! I want to conserve energy, so I may even want to shut it off, okay, and I don't feel I should have to go through this rigamarole every time I want the darn thing to just be available to the network. Furthermore, what's the sense of having to turn "Wireless Radio" on and off all the time???
Anyway, there are other problems and the menus in the internal web browser is about as confusing as it can be. Is the passphrase the same as a WPA key? There's a passphrase in there which I did not enter, and I don't know what it is because it's been disguised with dots. When I enter the WPA key on the front panel of the printer, it doesn't stick. One thing I noticed in the instructions is to keep telephones away from it, so I moved ours (was right next to it) but it's still being ornery.
In addition, the scan function only works from the software, not as a standalone if I use the front panel. When using the button on the front panel, sometimes it sees the laptop, sometimes it doesn't, and then it starts to scan, but a menu pops up on the computer asking to update the buttons, and then nothing happens.
Have we a clunker on our hands that should be returned, or is there a remedy? All suggestions welcome!
Message Edited by geoxena on 10-20-2009 10:56 PM
Message Edited by geoxena on 10-20-2009 11:03 PM

Let me answer the easy stuff first:
Yes, the passphrase is the same as the WPA-PSK key.
No, it's not normal to have to re-enter the wireless security key over and over again. Politely tell our service agent that he is mistaken on this point.
There's no sense in having to turn the radio on and off all the time to get the printer to remain on the network.
When the printer goes into power-save mode, can you still access the printer's internal web page by browsing to it's IP address? When the printer loses wireless connectivity, can you wake the printer by pressing any of the buttons on the front panel?
I have a couple more questions:
What WRT54G HW version do you have (it'll be on the bottom label of the router)?
What version of FW does your router have? You'll have to browse to the router's internal web page to find out.
Finally, change the WPA-PSK group key renewal period to the largest value possible. Tell if this affects the frequency of printer losing Wi-Fi connectivity?
One more question. After you have the printer connected to your wireless network and it's working, if you turn the printer off (via the power button), wait five seconds then unplug it then plug it back in and turn it on, does it connect to your network?
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

New problem with wireless connection since 27th No...

Main desktop computer (windows xp) is connected directly to the internet via ethernet cable to BTHub3. No problem exists with this connection.
We have previously had no problem connecting Tablet, laptop, and internet radio via wireless connection to our Hub. Problems now exist with wireless connection to all of these devices:-
- When attempting to use any of the devices wirelessly, we are unable to obtain a connection to our Network (shown on the list of those available) - indicates - "out of range" or "obtaining IP address" or "authenticating" or "network disabled - poor connection"
- On occasions, the devices DO show that they are connected wirelessly but are unable to access the internet or use any programmes requiring an internet connection. Messages indicate - "no internet connection" or "connection timed out - retry" or "cannot access this webpage", even when we are in the same room as, and only a few feet away from the Hub.
- One anomaly has occurred in that the internet radio did connect and function normally on 2 occasions recently , for a duration of a couple of hours, before loosing the connection. However, during this time, the other devices still refused to connect.
Measures we have undertaken to try to resolve the problem are :-
- We have visited the "Wireless troubleshooting" part of the BT Helpdesk on several occasions, but had already tried the measures suggested here, including changing channels and hub reset.
- We have spoken at length to the BT tech. helpline who have been unable to resolve the problem.
- We have emailed BT Help and received a reply from India suggesting all the things that we have already tried (ie. a "stock answer").
- We are not confident enough to access the Hub Manager as we feel feel this is beyond our capability.
We would be most grateful if someone could help us.
Solved!
Go to Solution.

Wingman2, the first thing I would do is uninstall BTDesktop Help if you have it installed. It can cause more problems than it solves.
I would also suggest that the first thing to try is a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 seconds.
After you have done a reset if you still have problems, download, install and run inSSider. It will show you the wireless channels and which one your Homehub is on. You want to find the channel with the least congestion, ie. least number of users. Once you have that you need to change your homehub onto that channel.
See link for insider. Use the free version.
http://www.metageek.net/products/inssider/
See link how to change channel on homehub
http://bt.custhelp.com/app/answers/detail/a_id/14094
After that if you are still having problems you could try setting the home hub to b/g only instead of b/g/n. If one of your devices is not "n" capable it could help.
http://bt.custhelp.com/app/answers/detail/a_id/13768/session/L2F2LzEvdGltZS8xMzg4NzgxNjIyL3NpZC9Vd3p...

OJ 8600 Constantly loses wireless connection

My OfficeJet Pro8600 Plus works great, except when it loses wireless connection. I have an ATT wireless router/modem. Frequently, when the printer goes to sleep, it will not print. The wireless icon on the printer shows good, and says connected. But then I get the message on my computer that the printer is not connected. I cancel the print, restart the printer and then it will work. I also frequently get the message that scanning is also not connected.
Once I reboot the printer, it works fine. Any ideas?

brown7373,
If you have not done so for a while, I might suggest that you install (reinstall) the Full Feature Software for your printer. In August of this year (2014) there was an Update to the software that may well help with the situation you are facing.
Less clear, due to the usual less than full descriptive qualities of the documentation supplied with these things (in my opinion), is the need for the accompanying firmware Update that is shown for at least those users running the Windows 8.1 Operating System. Firmware updates, might be installed after software updates are tried -- and only at the user / owner's discretion.
General Instructions to Install the Printer Software
Reminder:
In most cases, the Solution Center has been replaced by the Printer Assistant.
The Printer Assistant shortcut will be installed on your Desktop during the last part of the installation.
Windows Operating System:
Create Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
OR
Open HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g Drivers
Enter your Operating System in the Drop-down menu
Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the Basic Driver, e-print, or Full Feature Software
Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
Be sure to look for Updates as needed for your installation. If available, you may download the Print and Scan Doctor and / or other programs from Category – Utilities.
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
Scroll the video list back and forth until you find the video that most closely matches your situation.
If using a USB connection: Download and install the driver software before connecting a USB cable.
Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
After the initial installation is complete and working, check / install Category - Update
There is valuable information at the support website, including sections for Manuals, Troubleshooting > How-to, Troubleshooting > Solve a Problem, plus alerts and notifications for your printer. Be sure to take an extended look at what is available. Bookmark the page.
============================================================================
If you are running the computer wirelessly and using a notebook, you might consider the following:
Set the wireless adapter to "all on" as suggested in the following Dragon Document:
Settings to Improve Wireless Connectivity
See the Section on Page One titled
Wifi Power Management
============================================================================
What If: Bummer - Nothing works. Sad Story and all that.
If all else fails, you can call HP and politely ask for the printer code to switch off the sleep timeout on your printer model. This works when everything else fails. It is not a solution; this is a workaround and maybe not a pretty one -- there may be consequences down the road. Switching off the sleep timer will keep the printer awake and available.
Disclaimer:
There is no guarantee that HP will give you the code. This is not part of the service. You can ask the question.
Reference:
PhotoSmart 7520 Printer Loses Wireless Connection – Set System Mode Timeout to Zero
Contact HP – USA - Phone Assistance
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

How do I turn on photo sharing in itunes so I can see all my iphone photos on my ipad and home computer?

How do I turn on home sharing so I can see all my iphone photos on all my devices, ipad, apple TV, and home computer? I must have stopped home sharing when setting this up but would like to turn it on again.

You might have been using the iPad every day and this issue could have cropped up anyway. I have read where users state that they used their iPad the night before, plugged in to charge it over night and they had the connect to iTunes message on the iPad the next morning.
What I'm saying is that what happened to you can't be explained other than something went wrong. Brilliant I know, but how can anyone possibly know what happended for sure.
Without a computer - and I know that with iOS 5 an iPad can be PC free - it is my belief that you could be facing issues down the line because even with iCloud - if you get the connect to iTunes message - there is no way to correct the problem without a computer.
Even of you had been using the device every day, charging it every night and taking great pains to ensure that the iPad was well cared for, once the connect to iTunes message pops up - you still need a computer.
Unless I have been missing something for the last six months, iCloud can't bail anyone out of this scenario.

Printer loses wireless connection when it goes to sleep?

My printer loses wireless connection to my router when it goes to sleep and I have to input the WEP key again. As long as the printer is awake it works fine. The wireless light remains on.
Printer is HP Officejet Pro 8500A Plus and the router is a Verizon 7500.

If you mean WPA, that is good.
Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

TS3899 Cannot receive e mail messages on I pad -settings correct-can on I phone and home computer

Cannot receive e mail since last week on my I pad -can on I phone and home computer - settings correct help please

try deleting the account out of settings then reentering the email account.

Zyxel pk500z router/wireless modem loses wireless connectivity with imac

My iMac loses wireless connectivity with wirelss internet from my Qwest ZyXel PK5000Z modem/router intermittently. Have to constantly reboot the router to allow my Imac and other Mac notebooks nto reconnect to wireless internet connection.

Suggest that you take one or more of Mac laptops down to the coffee place and connect there to check your performance. If you get a good connection there....as I suspect you will...you know the Macs are functioning correctly.
If the Macs perform well at the coffee place, you need to contact the ZyXel support folks for ideas on why the PK5000Z device is requiring constant restarts.
As you might imagine....on an Apple support forum, we are not going to be able to provide much help with a ZyXel product.

I subscribed to iTunes Match. How do I sync other devices like my iPod and home computer

I subscribed to iTunes Match how do I sync other devices like my iPod and home computer?

http://www.apple.com/itunes/itunes-match/

How to keep songs on iphone, work computer and home computer the same?

How to keep songs on iphone, work computer and home computer the same?
This seems like something everyone would want to do. I don't know why Apple won't give us a simple solution. They could even charge us for it. I would pay!
Has anyone solved this? What is your solution?
Thanks!
[email protected]

If you just want to be able to sync your devices to the same PC without having them get overwritten all the times, here is a free method
http://cnettv.cnet.com/sync-your-ipod-two-computers/9742-1_53-50004835.html
Basically, you put the same itunes database file on all the PCs. This fakes itunes into thinking it is always the same PC and the ipod is OK to sync with it. It will NOT keep your libraries truly synced, though. I've just resigned myself to always buying from one PC and manually transferring the content to other PCs I want it on.

I have apps on my iPad and my computer is not connected to the Internet. How do I get my apps to load on the computer ? Because it says the apps on my iPad will be replaced with the apps that are on the computer but there is none there!

I have apps on my iPad and my computer is not connected to the Internet. How do I get my apps to load on the computer ? Because it says the apps on my iPad will be replaced with the apps that are on the computer but there is none there!

Authorize the computer in iTunes -- Store>Authorizie this computer. Transfer the purchases from the iPad into iTunes and then you can sync with iTunes. Read this for instructions on transferring purchases from the iPad into iTunes.
Transfer purchases.
http://support.apple.com/kb/HT1848

When I try to open iTunes app on iPhone 5, it starts to open then closes straight away, I upgraded to iOS 7.0.2 and it has been like this since I upgraded!

When I try to open iTunes app on iPhone 5, it starts to open then closes straight away, I upgraded to iOS 7.0.2 and it has been like this since I upgraded!

I also had this problem. Go to settings> itunes & app store, tap on your apple ID and sign out. Then open itunes store. It should now open.
Then sign back in again and the problem should be resolved

IPAD1 and home computer loses wireless connection since i upgrade to 5.1.1.

Similar Messages

Maybe you are looking for