Ipad2 30 pin to lighting connector

My wife has an ipad2 - looking for a docking/charging station for it.
Have found the iWant model but this uses a lightning connector --- does anyone know if there is an adapter to suit - ie male 30 pin/female lightning

doesn't exist, is available the lightning to 30pin only http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45

Similar Messages

  • Ipod will not charge when using 30 pin to lighting connector

    Have a victory vision with a 30 pin connecter bought the apple lightning coverter and when hooked to the bike it will not charge

    - Contact Bose/go to their support site to see if Bose says it will work. Also look for a firmware update for the Bose.
    - What model/iOS is on the old iPod that works. Sometimes an IOS update breaks compatibility
    - Sometimes this works:
    - Reset the Bose unit
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    BTW the the Lightning adopter does support audio if the dock supports it.

  • HI, if i bought an iPad 3  with 30 pin connector and i want it to change it to a lighting connector. thats possible??

    HI,
    - if I bought an iPad 3  with 30 pin connector and I want it to change it to a lighting connector. that's possible??
    -what are the differens with the 30 pin connector iPad 3 and the lighting connector iPad 3 ?
    -does old iPad 3 has DUAL CORE A6???
    PLEAS GIIVE ME AN ANSWER

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Unless you bought the iPad directly from Apple in the last couple of weeks, you likely cannot exchange your 3G for the 4G.

  • I want to buy a dock station with speakers and radio wich can support my ipad2 (30 pin connector) and also my iphone 5 (lightning)

    I want to buy a dock station with speakers and radio wich can support my ipad2 (30 pin connector) and also my iphone 5 (lightning). I would be glad to get your help.

    If you get the 30 pin dock get an Apple genuine adapter the rip-offs often do not work correctly
    If you buy a lightning dock a company called Sandberg makes the reverse adapter ,I have one and it works correctly
    As tonefox said i got the sandberg from Amazon

  • Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector.

    Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector?

    The lightning to 30 pin adapter does not support video as per the item description in the Apple online store:
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
    This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported.
    You will need to the Lightning to VGA adapter directly
    http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a
    Or the Lightning Digital AV Adapter
    http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
    If the projector supports HDMI input.

  • Will Apple make a 30-pin to lightning connector that will work with a case?

    Why did Apple make the 30-pin to lightning connector useless when you have a case on your iPhone 5/5s? The lightning connector part isn't long enough to fit inside when using Apple's own cases (i.e. the new leather cases for the 5s). Does anyone know if there are plans to correct this mistake and lengthen the connector?

    From the reviews on Apple's site, the cabled adaptor does NOT work with Apple's own case - the lightning plug is too fat :-(

  • 9-pin s-video connector

    I bought a second-hand MSI g4 Ti4200 TD64 with 9-pin s-video connector, but I have not the TV-Out cable. Could somebody send me a scheme of the cable or describe me function each of 9 pins? Thanks.

    I got in touch with MSI yesterday, and they are sending me the cables for FREE  
    They'll ask for your card's serial number...
    Alternatively, download the manual for the card, it shows the pinouts in detail for all the I/O ports...

  • 4-pin CPU-PWR connector on x99s SLI Plus

    I'm attempting to install a Kraken x-61 cooler into my Corsair 780T case and the MSI X99S SLI Plus mobo.  One step says:
    Connect the 3-pin power cable from the pump to the 4-pin CPU-PWR connector on the motherboard.
    In the MSI x99S SLI Plus mobo and the manual (En-6) I can't find anything called CPU-PWR.  The 3-pin power cable fits into the 4-pin CPUFAN1 connector, but I don't know if that's the correct connection.  Could someone tell me where the CPU-PWR connector is on the MSI X99S SLI Plus motherboard?

    it can be confusing to start with but you get used to it once you have done it a few times!
    so yes connect it to the fan header for CPU as that line has a sense pin that will detect if your pump fails and will shut the computer off to prevent the CPU overheating to stop it breaking the processor! just take your time and anything your not sure of feel free to ask us!

  • Where can I find the pin-outs for 8-pin remote Hirose connector?

    Where can I find the pin-outs for 8-pin remote Hirose connector?

    Pin outs and wiring info is all in the Maintenance Manuals (same for all system cameras, F series, XDCAM etc.), - ask your local Sony Office if you want the info.The 8pin remote is for connection to the Sony RM-B150/170/750 remote control panels.For system cameras the same protocol is used between RCP panels, MSU, CCUs and camera heads.It is a proprietry system so extremely difficult to hack!The RM-B170 is the ideal panel to work with the PMW-F5/55. It will give basic painting control of R/B white & black painting, Master Pedestal, and Iris with the correct lens (Cabrio etc). It can also control remote Rec stop start.Regards, Clive. Sony ANZ.

  • My Ipad charger (metal bit around the white bit) and by the way its the lighting connector  has got stuck inside my Ipad, just wondering if anyone could help me get it out, or tell me if apple would still apply this to the guarantee (still in guarantee)

    Yesterday my Ipad was running out of charge, so of course I went to charge it, I didnt realise that the lighting connector would not go in, evetually I realised that a part of the charger got jammed inside the ipad and now I cant get it out
    I was just wondering if anoyone coud help, give advice or tell me if apple does include this in the gaurntee since it is another year until it runs out
    this is not accidential damage by the way
    many thanks 

    Take it to an Apple store genius bar...should be a warranty coverage but they will tell you exactly.

  • How to control instrument switch through PCI-6503 & 50-pin I/O connector

    Hi, everyone:
    I have a problem in controlling an instrument switch which switch position between zero point and measuring point every five minutes during experiment. The hardware used is PCI-6503 card & corresponding 50-pin I/O connector, cable and the software is labview.
    The instrument manufacturer provide a cable(25-pol.SubD-plug male)for connection to computer(or DAQ board).The instrument manual showed the following pin assignment for this cable:
    25-pol subD-male pin assignment(TTL-level):
    meaning zero point measuring point
    Pin 9 MP L H
    Pin 7 ZP H L
    Pin 23 Gnd
    Pin 18 Gnd
    Pin 4
    Remote H H
    Pin 3 Weight1 H L
    Pin 2 Weight2 L H
    Pin 5 Gnd
    (weight1&weight2 is for calibration purpose)
    I want to connect these cable pins to Port A(pin 33-47) of I/O connector and then using labview easy digital I/O "write to a single port.vi" to programming it. But I don't know how to connect these pins. For example, pin-5,pin-23,pin-18 is Ground, how can I realize it ? Do I need to connect other pins in 25-pol sub-D plug(besides above 8-pins) male to 50-pinvI/O connector or just leave it alone? Hope everyone give me idea. Of course, the detail is preferred since I have a good background in electronic.
    Also I will be very happy if everyone have a labview programming sample in similiar application.
    Thank you very much for help!
    Sincerely
    Jingjun

    Hello;
    My understanding is that you need to connect each one of the GND pins to each one of the GND pins of the DAQ board. By doing that you will be creating the reference to the TTL signals being read on the DAQ board. The MP and ZP would go to any digital line of the preferrable Port and you should be good to go. As far as I'm concerned, you don't need to make any extra connection.
    I don't know exactly what you are willing to do with the data but, once the data changes each five minutes, you don't need any speed digital application. If you take a look at the Labview shipping examples for 6503 doing read from 1 Digital Port.vi, you should be ok.
    Hope this helps.
    Filipe

  • Somebody knows if apple replace the Lighting connector?

    Hi
    mi lighting connector is not working anymore, this lighting connector only worked for 10 months and now I don't know if apple will be able to replace it.

    everything in the box is under the same warranty

  • Ipod keeps telling me this message and lighting connector only charges ONE way

    So my iPod touch 5th gen KEEPS telling me this message and it's even when I don't have anything plugged ! And yess I've done everything possible restart etc. , my lighting connector is a Official apple product so I don't  get why it's saying that ? Please help . My apple care expired and I REFUSE to  pay 150 for a repair and this is my 2nd replacement. It's been messing up so much lately

    I suspect either a bad cable, foreign material in the connector or a damaged connector in the iPod.
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable. Yes, try another cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Pin out for connector block - CB-50LP (50 pins)

    1. Need pin out designation for 50 pins connector block, for use in multifunction DAQ (6024E)
    2. Connections from 6024E to 68 pins connector block.

    1.  How are you connecting the 6024E to the 50 pin connector block?  Any special 68 to 50 pin cable or adapter should have a pinout that comes with it.  If you have an NI cable or adapter you should be able to look in that part's manual online at ni.com and find this pinout.
    2.  What specific 68-pin connector block are you using, is it an SCB-68?  For an SCB-68 the pins on the connector block are mapped to the same pin on the 6024E or any E-Series and most M-Series boards.  The pinout for the 6024E will be the pinout for the SCB-68. 
    Jason N    

  • 2nd 8-pin CPU power connector on Big Bang XPower

    I am currently using both 8-pin CPU power connectors and am wondering if it is really necessary with my current overclock.  For all the BB XPower owners let me know your thoughts on this.

    When doing early tests with the BB Xpwr, I only had a single 8 pin CPU connector ( PSU was single +12V Rail). Since it was not necessary but recommended, I purchase an 8 pin Y cord manufactured by Athena. It worked perfectly until I got a newer double cabled 8 pin PSU (Single +12V rail Corsair AX1200). I also supply power to the boards 6 Pin JPWR4. As Jack says, if the PSU has the connectors (or use the Athena), fill 'em up with power!  

Maybe you are looking for