IPad2 activation issue after factory reset

Hi,
I did a factory reset "Erase all contents and settings" on my iPad 2, but there are issues with activating the iPad. I have tried it connecting with itunes and restore it both with Recovery mode and DFU mode, but still the issue persist.
Please help to resolve this.

iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad Stuck in Recovery Mode after Update
http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
 Cheers, Tom

Similar Messages

HT4623 what is waiting for activation mean, after factory reset

what is waiting for activation mean after doing a factory reset, how long does it take

Has your iPhone been jailbroken or otherwise hacked?

HT5312 phone activation after factory reset

Will a factory reset require reactivation of phone service with the carrier

Hi, SBtaylor.
The iPhone will require the previously used SIM or a valid activated SIM after factory resetting the device.
Using an iPhone without a wireless service plan
http://support.apple.com/kb/HT3406
Cheers,
Jason H.

Recovering data after factory reset (security issue)

Hello there,
Recently a friend of mine asked me how to erase all data on an iPhone ? I pointed to him to "factory reset".
Now, I see a bunch of websites that show how to recover data after factory reset using their software, not sure if they work as advertised or not.
What I would like to know is if the user wants the data to be erased and non-recoverable, is this the best option or if there is any other option available in iPhone that can make the data un-recoverable. We want to make sure the data is un-recoverable after factory reset.
thanks
Ashish Shah

unfortunately this doesn't answer my question.
I do know the option to "erase all content and settings" in iPhone.
What I want to know is to make sure once done, no one can recover that data back. Since this phone will be sold off to some stranger, we don't want them to have access to the data.
Here are a few websites from my just preliminary search results that show how to recover data.
just google "extracting data after factory reset iPhone" and you will see a bunch of websites offering their products to recover. So I want to check if this is so simple, how can we really make sure the data is wiped off clean.
Ashish Shah

Problems with a new IP phone 7906 after factory reset

Hi Guys
I am currently having problems with my new IP phone 7906 after doing factory reset and here is a video of it:
http://www.youtube.com/watch?v=vvCLtwIAwVw
I used this command I found on the net:
Hold down
while plugging in the phone and keep holding it until the message waiting indicator (red light) starts blinking. Then
release # and type 123456789*0# in sequence.
I was trying to switch my phone to sip and it also dont want to take tftp setup either.

Tim,
Found this on the net
http://www.cisco.com/en/US/ts/fn/620/fn62949.html
Might be woth giving it a go
6.Pull power on the phone (even if power is PoE).
7.Hold down the # key on the phone.
8.Continue holding down the # key and re-apply power.
9.While still holding the # key wait for the Message Waiting Indicator (MWI) light on the handset to start flashing.
10.Once the MWI light is flashing, release the # key and enter the following sequence exactly on the keypad:
3491672850*#
Once this sequence has been entered on the IP Phone, if all the network criteria above have been met, it should begin its recovery process. This process can take up to 15 minutes to finish. The phone may appear to be doing nothing during this time. However, if the phone does not recover after 20 minutes then it is possible that the recovery is stuck. In this case, re-examine your network and verify that steps 1-4 are in place, then re-issue the factory reset sequence.
* Note: The factory reset sequence is a way for a phone to clear flash and still upload to a valid firmware image. This is facilitated by the termxx.default.loads file, but requires that the image files listed in the termxx.default.loads file are available in TFTP for the phone to download. Open the termxx.default.loads file in any text editor. This loads file is essentially just a packing list showing all the OS and application files the phone needs to function. The files include a cnu, cvm, dsp, app and jar files. Please make sure that these files as listed in the termxx.default.loads file are in TFTP. ("xx" will be either "06" for the CP-7906G model, or "11" for the CP-7911G model.)
Additional Diagnostic Steps:
- Try a hard-coded IP address as a test to see if this resolves the upgrade failures. If it does, and the number of failing IP Phones is relatively few, this procedure may be the most expedient. After the IP Phone upgrades successfully, reconfigure the IP Phone to use DHCP.
- Try putting the phone on a hub or a different switch and see if this helps change the startup timing enough so that the upgrade completes successfully.
Regards
Alex

Time capsule setting up problem after factory reset

What's the next step after factory reset to set up my time capsule again???
i did factory reset for 4-5 times and i cant use my time capsule to create a network, join an existing network or anything else.
i also tried normal reset but still nothing can be done.
There is always a message at the end " an unexpected error occured. Try again"

Plug the TC into the computer by ethernet..
Make sure the computer has no other network running and nothing else is plugged into the TC.. just TC Lan port to the computer ethernet.
Now press reset and open airport utility.
Generally you will have no issue once it is isolated. Do the setup and then you can disconnect and put it back in the network.
If it doesn't work, is the LED on the TC flashing amber or what??
Is the ethernet port connectivity LED on?

Data recovery after factory reset

I have seen people write that data recovery was possible after factory reset below the jelly bean OS versions on android but iphone is impossible.
So I wonder what is security technology for data protection on iphone.
Let me know security technology. (data encryption, data fromat algorithm, whatever about data protection)

Follou-up..... reading other questions/answers on this forum seem to indicate I'll have to "cherry pick" specific saved data items from the desktop "Shortcut to System Recovery Files" --- a long process. Is there a quicker way???

Cisco 7941G phones will not boot up after factory reset.

Cisco 7941G phones will not boot up after factory reset.
The following happens.
1. Speaker light lit (Green)
2. Phone displays a firmware upgrade page (see attachment) for a few minutes. (Doesn't seems to be upgrading, but it "saids" upgrading)
3. Saw Cisco logo with a Java Powered page.
4. The whole thing loops again and again...
I think the reason why the phone isn't booting up is because the phone needs to know where to find the configuration/firmware files from a tftp server. I do have a TFTP server, but normally I need to go in settings to change the alternative tftp server, but the thing is that now I can't even press the settings button...
Please help.

How many phones were reset and upgrading at one time? What is the setting of the TFTP Maximum Serving Count (Advanced TFTP Service Parm) on each of the TFTP servers?
Sounds like too many devices trying to use TFTP at once.

No audio, after factory reset,flash install,SoundMax & HDA audio drivers won't install

My problems are:
No sound with Youtube or the laptop itself
SoundMax won't install either though I downloaded HDA audio drivers it requested.
Flash download stuffed up my SoundMax after factory reset.
I decided to do a factory reset after Youtube starting slowing down. After reset it (Youtube) kind of worked better
then the audio disappeared from the laptop. The drivers, SoundMax Audio was gone (greyed out).
I downloaded the Audio driver from Lenovo website for my X31 but SoundMax install wouldn't install because it kept saying HDA Audio drivers weren't installed.
I downloaded it from here:
http://support.lenovo.com/en_AU/research/hints-or-tips/detail.page?&DocID=HT072373
So I went to HP site to download HDA audio drivers, then the SoundMax Audio reappeared and I had sound on my computer.
HDA Audio drivers link at HP website (since Lenovo doesn't have it):
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?cc=US&lang=en&swItem...
When I downloaded latest Adobe Flash, the SoundMax Audio disappeared again. So at the moment I have Youtube video without sound (and Firefox keeps telling me to download Flash?)
No sound on IE as well.
Would appreciate your help. Thank you very much.
I'm using:
ThinkPad X31 (2673-QU6)
Based on 2673-N7G
Win XP Pro Service 3 with recent updates
Firefox (latest) with add-ons
Solved!
Go to Solution.

You need to install the modem driver too.
http://support.lenovo.com/en_AU/research/hints-or-tips/detail.page?&DocID=HT072373
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Help!! please email setup requesting enterprise activation after factory reset

after i did a factory reset i notice my email set up is requesting enterprise activation email and password i don't have either so now my email setup can't work unless i do it and my native browser won't connect and blackberry protect won't work. i registered the blackberry thru hosting and i got your blackberry is registered but i can't get the other apps to work since i need the enterprise activation.

i got the phone from ebay so i don't know if it's on BES and as far as a blackberry data plan i have verizon prepaid and i activated the phone thru them with no problem and i signed up for BIS with no issues but i don't remember the password to get the service books sent to my phone. the phone just stop working a couple of days ago i have had it since october with no issues until now. the first thing i notice was i stopped getting email and it said my service was blocked so i did a battery pull that didn't work. then i did a security swipe and now i can't access the email setup or the browser and it says that i don't have a data plan needed to use it which i don't get since i have had no problems since october. i was told on by someone that maybe i was over my data but i just looked and saw i wasn't and it rolled back since i paid on the 24. this is like the 3rd incident since switching from post paid to prepaid it is making me want to switch carriers

Windows 8 not active after factory reset

I bought this laptop a year ago in US, with windows 8 and was upgradable to 8.1. I upgraded and was using 8.1, until 2 days before when system crashed. I was not able to perform a system restore, therefore did a factory reset. Now when the system boots or when i try to upgrade, its asking for an activation code which I dont have. I was in the assumption that the system restore version of windows should have a valid license key but its not the same in my case .
please advise.
Additional information: windows update are still working. not sure if this is helpful.
Thanks in advance for responding.

HI @Sasikaran ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you have done a factory recovery and it is now asking for the activation code.
The code is stored in the bios and it should automatically pick it up .
Here is a link to Windows 8 Product Activation to assist you.
Here is another link to assist you with reupgrading to Windows 8.1
Updating Windows 8 to 8.1
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Windows 8 not activating after factory reset

I recently did a factory reset to my Hp Envy 17. Once i went throgh all the steps and signed in to windows 8 I thought I was done since the product key to windows is embedded in the system BIOS. I noticed a little later that my computer was asking me to activate windows 8. So i went into my setting and typed in my windows 8 product key that came preinstalled on my Envy 17. Once I typed in the Product Key I got a message that said "Activate Windows. The product key on this PC didn't work. You might need to contact the company that built this computer, or buy a new key." I have tried reinstlling windows 3 different times and tried typing in the product key on windows 8 and windows 8.1, both times the product key was not recognised, and i know i didnt type the key incorrectly or have the wrong i double chcked i had the right key by checking on belarc advisor. I have tried many ways to fix the problem and every time it does not work. It seems as though my key has maybe become corrupt some how. I also still have my hp warranty that came with my laptop if that helps at all.

as far i can tell you and i have not yet restore a pc that is windows 8 yet but previous versions which i have had and never was asked the activation nor it failed to update the pc because it was already activated and stored on microsoft end when you run your computer the first time and also even when i used the extra hard drive and it was window 8.1 iso disc that i got downloaded from microsoft legit-ly from microsoft site and it appears microsoft recognized my pc because it was related to my email logging on with microsoft email but as my extra older hard drive from an older defunct pc and when i was upgrading my older vista pc to windows 7 on my second hard drive on my quad processor pc it did ask for the product which i have bought from the store and there was no problem with my activation issues with microsoft

LG Ally not activating after factory reset

Moved for greater exposure

as far i can tell you and i have not yet restore a pc that is windows 8 yet but previous versions which i have had and never was asked the activation nor it failed to update the pc because it was already activated and stored on microsoft end when you run your computer the first time and also even when i used the extra hard drive and it was window 8.1 iso disc that i got downloaded from microsoft legit-ly from microsoft site and it appears microsoft recognized my pc because it was related to my email logging on with microsoft email but as my extra older hard drive from an older defunct pc and when i was upgrading my older vista pc to windows 7 on my second hard drive on my quad processor pc it did ask for the product which i have bought from the store and there was no problem with my activation issues with microsoft

Can't activate my droid after factory reset?

I have the droid (First one release) I recently dropped it, screen cracked.. I had insurance and got another droid. I've been using it just fine for 2 days texting, calling, using the data, everything was great.
But a few hours ago I couldn't send texts, was receiving texts with extreme delay, and the ones I was recieving would repeat themselves every few minutes even though the people had only sent them once. so I thought I probably screwed something software related up, whatever. I tried doing an internal factory reset, it just stayed at reset after I clicked it, so I turned it off and did a hard reset.. turned it back on and the screen to activate came up, I hit activate, it called verizon, after pushing the numbers at prompt and waiting it said "Activation successful", I hit next and it went back to the first screen to activate the phone.. figured it was just an error, skipped, but I couldnt connect my google account (Because i still didn't have 3g due to activation). I turned it on and off, didnt work, factory reset again, didnt work, anyone know how to resolve this? It's really frustrating.. though im hoping its some freak network outage in my area and in the morning everything will be fine.

Hi Xiael,
As I reviewed your posts I see that you were able to activate your phone; that's great!
I trust that your text messaging concerns have been resolved as well by now. Thanks for keeping us posted.
Please keep in mind that this is a peer to peer forum and while our Social Media Team monitors the activity on these forums, we offer more efficient ways to get troubleshooting assistance for critical issues such as phone activations and text messaging concerns.
For prompt assistance from our Social Media team please don't hesitate to contact us on Twitter @VZWSupport Monday to Friday 7am - 10pm and Saturday 7am - 4pm CST.
You can also call us at 1-800-922-0204 for immediate assistance from 6am to 11pm CST any day of the week including Sunday. Please have your phone fully charged and available for troubleshooting when you call us.

Blank Screen after factory reset 7911 phone

Hello guys,
I had a weird issue on an 7911 ip phone. It was connected to my network and on the display of the phone was saying "ethernet disconnected".
What i did was a soft and a hard reset using 123456789*0# and then 3497672850*# following the guidelines of a conversation in the forum
https://supportforums.cisco.com/thread/2166581
After the factory reset the device has a blank screen (I left it for more than an hour connected on the network bearing in mind that some processes might be loading in the background and the firmware will load at some point..that didn't happen) and it is unable to receive an ip address ("show ip dhcp bindings", shows nothing related to the mac address of that device).
To eliminate the possibility that the problem might be on the network card of the phone, i've factory reset a working phone using the above described procedure.
I had the same problem with that phone too.
Are there are any log commands that i can use to further investigate my issue? (I can't see any logs using "terminal monitor"command)
I am using call manager express 4.3.0 on a cisco 2800 router.

Dragan,
I tried what you suggested with no luck.
What i noted is that, when i plug the power adapter on the phone and connect the ethernet cable on the switch port of the phone (the other end goes to a d-link small switch) the light on the small d-link switch doesn't come up. However if i plug the ethernet cable on the pc port of the phone the light goes green. I checked it with two phones that i've factory reset and it is the same problem.
What i understood from this, is that the pc is unable to retrieve an ip from the dhcp server and the necessary option 150 to locate the tftp server and retrieve the necessary firmware.
Gordon, due to the above mentioned problem i can't proceed with wireshark since i don't have network connectivity between the phone and my workstation.
Guys, do you have any alternatives that i can give a try?
Thanks a banch!

IPad2 activation issue after factory reset

Similar Messages

Maybe you are looking for