Ipad2- all files was gone after updated. please help

after i click "updated" of my ipad2, all my files was gone, all viedo ..photos was disappeared,
how should i do??? is it possible to find back my files???

Restore from iTunes or iCloud backup if you have one.

Similar Messages

Legacy component was gone after updated the sound library

Hi there,
I found an update sound library option in my GB 10.0.2. After the updates, my 'Legacy' component was removed. Could anyone help me how I can get it back? Thanks.
Catherine

Hi
I have never heard that the antivirus software has a bad influence on the sound, speakers or the sound driver.
What you can do is to check the device manager if there are some yellow exclamation marks.
Try also to reinstall the sound driver. Check the Toshiba driver page.

Serious Issues after update, PLEASE HELP!!!!

Two nights ago i did a software update. Shut the computer down everything was fine. Im not sure the software update worked properly. When i restarted the computer later that evening, all i got was the gray screen with the apple. A friend was searching forums for me over the internet while we were trying to fix it. Did the CTRL OPTION R P thing and that didnt work. Did the CTRL S and that didnt work. Next day went and bought a Snow Leapord cd. After three hours the status bar moved appx 3/4 of an inch. Took it to apple. They wiped the Hardrive clean and reinstalled Snow Leapord to it. Now it restarts and operates. However, it takes about 15 min for it to start up and get to the desktop and it runs TERRIBLY slow. It has a 500g hard drive that was put in 2 weeks ago. It also has 2g of RAM. After taking it to apple it is only showing 1.5G of RAM after the wiped the hard drive. PLEASE HELP ME!!!!!! Everything was working fabulous prior to 2 nights ago.

Well I just rewiped the hardrive clean and reinstalled snow leapord. IT WORKED!!!!!! Computer is running fast as could be, start ups in less than 30 seconds, no lagging. Im really happy as i bought this computer from a good friend and its less than a week since ive had it. I think ill just live with the ram still showing 1.5g. I think ill wait and just go get 2 4g sticks when i get around to it that way It will be as fast as possible and ill be using the ports to their full potential.

IPad 2 cannot connect to Wifi before and after updating PLEASE HELP

i have been using iOS 5.1.1 till today.. the connection to wifi stopped working.. it slowly faded away and today i woke up and could not connect to My wifi at all, i have decided to update my iPad to iOS 7.0.4 but the problem is there
what should i doo ??

It could be a problem with your WiFi router or your iPad.
If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
See also here: http://www.apple.com/support/ipad/wifi/

My phone won't power up after updating please help

My phone will not power up after updating...it's been three hours...please help

Hey laurelletoo,
Welcome to Apple Support Communities.
From what I gather, there’s an issue turning your iPhone 5 on after updating it. Take a look at the article below and try running through the suggestions that it provides.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Take care,
-Jason

All ipad Music gone after update to ios5 please advise

Did a backup before and restore after and ZERO songs. Dreadful please advise

Restore from the backup you make of your computer because you have such valuable things on it. I ripped my vinyl 15 years ago and the first thing I did was buy backup drives and kept them in a separate part of the house.

Pix and Videos gone after update - need help please.

Hi all,
I upgraded to the new OS2 and loved it... no problems there. When I tried to connect and pull pictures off via my PC, I got a message Blackberry Desktop software could not connect. I tried it multiple times after restarting the Playbook but would not connect. It connected and advised I needed to upgrade my software which I did, but when I started the Playbook after the install it was like it was brandnew out of the box. Had to go through the tutorial and then I was shocked to find all my pictures and videos were gone. I don'r care about the videos but had some really important (to me at least) pictures I wanted off of it.
Sooooo.... any chance of recovering those or does the updates just "Blow" everything away? I will never use my Playbook to take any pictures or video of anything again and guess I learned a painful lesson.
Thanks for ANY input you might be able to provide.

Same thing happened to me. RIM <Inappropriate Content Removed>
this one up.

Files are gone after updating Mac Air to OS X 10.8.5

I have update my Mac Air to OS X 10.8.5. Now all my files and pictures are gone, my iPhoto are empty! What can i do???

Restore the missing files from your Time Machine backup.

All info lost after update, please help.

So I updated my phone a few nights ago and it went fairly smoothly. It dropped my apps, but that was easily fixed by going to the app store and just redownloading them all.
Tonight, I went to update my wife's phone. I first synced it so it would make a backup of everything on it. Started the update and it dropped everything from her phone (contacts, pics, apps, matter of fact, its like its a brand new phone...) So I thought to myself, no biggie, I'll just restore it.
Now, I use the same computer for my wife and I's phones. I went to restore her phone and it only has restore points for my phone. Is there anything I'm missing? As many husband's out there probably know, this is going to be a fun conversation to have with my wife that I lost everything on her phone (albeit not my fault but that really doesn't matter).
Please, please, please someone let me know if there is anything I can do to restore her phone before this update threatens a wife's wrath being brought upon a husband just trying to make her phone faster.
Thanks.

Even if it told me it was creating a backup? I can understand that apple doesnt care too much about multiple people using one computer (hope you caught the sarcasm), but if it told me it was creating a packup, shouldnt it have legitimately created one? It doesnt even show one in the restore from log.

5g 30gig iPod not working after update, Please Help!

I have a 5th gen 30gig iPod and a yesterday I tried to update it. During the update after it shut itself off and started back up the updater froze around 20%. After about two hours of waiting I forced the updater to quit (restarted it with menu/select) and then tried to turn it back on to no avail. So right now the iPod is dead.
I've tried the whole hold menu/select to reset (even for up to a min) then I did the flip hold on and off and try again method. I also tried with the iPod plugged into my PC and my Mac. I also tried using the AC adapter. All attempts resulted in failure. Because it stopped working after the update I'm confident that it isn't the battery or that the iPod is physically damaged and that this is just a software issue.
Any help would be greatly appreciated. I've had the iPod for a little over a year and therefore have no warranty for it.

I am having the same exact problem as you, it just won't boot up. The apple logo lights up on the screen for a little while and tried to boot up, then the screen goes black, and it starts over, the ipod trying,(and failing)to boot up. This goes on like this until the battery is dead. I'll repost if I figure out how to fix this.

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

HT201269 My PC crashed. iTunes was on it and now all files are gone. All music does exist on iPad. How do I get the music that had been downloaded from iTunes and copied from my CDs onto new PC from iPad. Would rather not use cloud.

PC crashed. iTunes was on it and now all files are gone. All music both purchased and copied from CDs is on iPad. How do I get the music back onto the PC without using the cloud. Afraid if sync will wipe all music from iPad.

You would need to download iTunes on comp and download purchases again (you don't have to pay again) and upload your CDs again IF you sync your iPad to your computer it will erase everything

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Hi all,
im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
- Deactivation/Activation of File Adapter channel
- check that user XIISUSER is not locked
- checked SXI_CACHE (it seems ok)
- Many CPA full refresh
- Dummy modifications of File Adapter channels (a dummy modification of the description)
- Reboot J2EE
I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
Thank you
Manuel

Hi Prabhu,
I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
This is the error log from message monitoring:
 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
2007-01-16 16:37:34 Success Send binary file "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
2007-01-16 16:37:34 Success Trying to put the message into the send queue.
2007-01-16 16:37:35 Success Message successfully put into the queue.
2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
2007-01-16 16:37:35 Success The message status set to DLNG.
2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. 
2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
2007-01-16 16:37:35 Success The message status set to WAIT.
2007-01-16 16:42:35 Success Retrying to send message. Retry: 1
After this, the system try to resend the message, and the same error appears several times.
Ty,
Manuel

I lost all my phone contacts after updating my iPhone 4 to iOS5.

I lost all my phone contacts after updating my iPhone 4 to iOS5. It's not just contacts, my photos, messages, mail and everything is gone. I did the back-up thing on iTunes too before I updated the iOS. The only thing that restored was the apps. Is there anyway to get this back?

If you no longer have service with AT&T, I don't believe you can.

I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd.After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality?

I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd. After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality? or any other exporting alternatives?

Hey Z,
Thank you for the tip on exporting by media browser (large) from imovie. But of course, if it's not one thing it's another. Now that I figured how to export a large file from imovie, I have an idvd issue. I followed the instructions for burning from idvd and changing the encoding to professional quality and the burn speed to x4, but I am receiving an error that states the following,
Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window.
Project:
- total project duration: 79:04 minutes
- total project capacity: 4.327 GB (max. available: 4.172 GB)
Menus:
- number of menus in project: 1 menus
- total menu duration: 0:39 minutes
- total menu capacity: 37.370 MB
Movies:
- total movies duration: 78:25 minutes
- total movies capacity: 4.291 GB
I have searched in the idvd forum for similar issues and I am stumped at this point. I have tried deleting the encoding assets and re launching idvd with the changed preferences, and still the same error. I know you mentioned something about free hard drive space available, and I have very little left. 4GB to be exact due to massive hours of non-edited footage. I am not sure if this is why, but I do not recall ever needing free space to burn memory onto a separate dvd. I would be more than happy if I am wrong, and it would be a quick fix. Otherwise, the technical nightmare continues. It's all a learning process and your expertise is greatly appreciated! Thanks in advance.

Ipad2- all files was gone after updated. please help

Similar Messages

Maybe you are looking for