IPAD2 and camera recommendations

Hi - I will be traveling overseas and will be purchasing an  IPAD2 and camera, any recommendations for a good camera that is compatible with IPAD2 for under $400?  thanks

Gardenrose-
I am extremely pleased with my Canon G11 camera.  The current version is the G12.  These can be had for a little under $500.  Perhaps you could meet your spending limit with a used G11 or G12 from a reliable source like B&H Photo.
The G12 has a reputation of being used by professional news photographers when a DSLR would be too conspicuous (like in Libya).  It is a little on the heavy side compared to more compact point-and-shoot models.
My G11 connects through its USB cable to the Apple Camera Connection Kit on my iPad.  Its SD card also works with the kit's SD adapter.
Fred

Similar Messages

  • HT2589 I just bought an Imac. I have an ipad2 and an iphone 4s. My wife has an iphone 4s. Both of us have different apple ids. Would you recommend a new one or use an existing id?  Why?

    I just bought an Imac. I have an ipad2 and an iphone 4s. My wife has an iphone 4s. Both of us have different apple ids. Would you recommend a new one or use an existing id?  Why?

    It is best to stop making all new apple IDs, as software is permanently tied to them, and you can't converge them. Make differnt ones if you plan to get divorced though....

  • Trying to find a camcorder that records in 60 frames per second and will upload onto  ipad2 through camera connector

    Trying to find a camcorder that records in 60 frames per second and will upload onto  ipad2 through camera connector

    Old forum discussion, message now gone, but here's the summary
    Matt with Grass Valley Canopus in their tech support department stated that the model 110 will suffice for most hobbyist. If a person has a lot of tapes that were played often the tape stretches and the magnetic coding diminishes. If your goal is to encode tapes in good shape buy the 110, if you will be encoding old tapes of poor quality buy the model 300
    Both the 110 and 300 are two way devices so you may output back to tape... if you don't need that, look at the model 55
    http://www.grassvalley.com/products/advc55 One Way Only to Computer
    http://www.grassvalley.com/products/advc110 for good tapes, or
    http://www.grassvalley.com/products/advc300 better with OLD tapes
    Or
    ADS Pyro http://www.adstechnologies.com

  • Ipad2 rear camera doesnt work and camera app freeze

    Just got ipad2 and the rear facing camera doesnt work and the camera app freezes anyone experiencing same?

    Apple Community Discussions
    Apple.com > Support > Discussions > Using iPad > Camera
    Topic : iPad 2 Camera - Doesnt Work
          This question is not answered. "Helpful" answers available: 2 . "Solved" answers available: 1 .
          Reply to this Topic           Back to Topic List
          Replies : 11 - Pages : 1 - Last Post : Apr 1, 2011 2:20 AM by: crh24     
    Adam Daley
    Posts: 3
    From: NY
    Registered: Mar 27, 2011
    iPad 2 Camera - Doesnt Work
    Posted: Mar 27, 2011 5:18 PM            
                Reply          Email
    So I got the iPad 2 last Wednesday and tried facetime. It seemed to work then froze, but I gave up as it was still new and I was still figuring things out. Anyway i'd use the camera a few times (maybe 3) and made maybe 2 quick videos, nothing big. I never use the camera much. Today I went to videotape my nephew and clicked the camera screen, but it wouldnt leave the shutter screen. If i restore it to default, it works. But as soon as I sync my iPad up so it restores all my settings, the camera freezes. Obviously facetime and photobooth don't load either.
    I think a few people have this issue, what was the resolution? if i take it to apple will they give me a new one on the spot or send it in for repairs, and im without it for a while?
    32GB 3G   iOS 4    
    David.Austin.Al...
    Posts: 11,820
    From: Monterrey, Estados Unidos Mexicanos
    Registered: Jan 15, 2006
    Re: iPad 2 Camera - Doesnt Work
    Posted: Mar 27, 2011 6:09 PM     in response to: Adam Daley            
                Reply          Email
    Welcome to the Apple Discussions!
    If when you restore the iPad to the factory settings the camera works, then there is nothing wrong with the iPad, you have something corrupt in the backup that you are using to restore your previous settings. I would delete the backup and start fresh. Go to iTunes/Preferences/Devices and delete any and all backups there for the iPad.
    Then configure and sync the iPad as if it were new from the box for the first time.
    Dah•veed
    Early '09 Mac mini - 8GB RAM, Early '06 17" iMac CD - 2 GB RAM   Mac OS X (10.6.6)   Happily using Macs since 1984!  
    iscs
    Posts: 2
    Registered: Mar 28, 2011
    Re: iPad 2 Camera - Doesnt Work
    Posted: Mar 28, 2011 6:17 AM     in response to: David.Austin.Al...            
                Reply          Email
    Mine Also i recieved my ipad last wednesday after strange delay in shipping in hong kong and my front camera does not work at all and i update ipad and reset many times without sucsess .
    Camera application start on back camera and ok and then when i try to switch to front one it freeze with last image from back camera then after i close the application from multitask bar and open it again it show me shutter picture !!!!
    I think apple has problem in this patch of production .
    Ipad 2   iOS 4  
    David.Austin.Al...
    Posts: 11,820
    From: Monterrey, Estados Unidos Mexicanos
    Registered: Jan 15, 2006
    Re: iPad 2 Camera - Doesnt Work
    Posted: Mar 28, 2011 9:38 AM     in response to: iscs            
                Reply          Email
    Try this reset. Press & Hold the Sleep/Wake and the Home buttons simultaneously for 10+ seconds. Ignore the red power off slider.
    Early '09 Mac mini - 8GB RAM, Early '06 17" iMac CD - 2 GB RAM   Mac OS X (10.6.6)   Happily using Macs since 1984!  
    iscs
    Posts: 2
    Registered: Mar 28, 2011
    Re: iPad 2 Camera - Doesnt Work
    Posted: Mar 28, 2011 1:26 PM     in response to: David.Austin.Al...            
                Reply          Email
    I try it without any success and i try even to restore the same result . as i see the first group of ipad 2 which ordered on 11 march and delivered on last wednesday is almost have issue in front camera between freeze and not working at all .
    Ipad 2   iOS 4    
    David.Austin.Al...
    Posts: 11,820
    From: Monterrey, Estados Unidos Mexicanos
    Registered: Jan 15, 2006
    Re: iPad 2 Camera - Doesnt Work
    Posted: Mar 28, 2011 2:01 PM     in response to: iscs            
                Reply          Email
    Not mine. It works perfectly.
    Early '09 Mac mini - 8GB RAM, Early '06 17" iMac CD - 2 GB RAM   Mac OS X (10.6.6)   Happily using Macs since 1984!  
    Adam Daley
    Posts: 3
    From: NY
    Registered: Mar 27, 2011
    Re: iPad 2 Camera - Doesnt Work
    Posted: Mar 28, 2011 6:30 PM     in response to: David.Austin.Al...            
                Reply          Email
    Deleting my backups and starting fresh kinda *****. I'd rather not have to re-do all my settings like email and my apps. Its not that i have a lot of apps, maybe 5 or so I use, but still, its a bit of a pain. I guess I can TRY it... can't hurt right...
    I dont want to just delete my backups though, i'll store them somewhere else (i think i remember where apple stores them) and copy them over later if i need to.
    Worth a shot, better this then my iPhone which has a ton of apps I use for work. Im still setting the iPad up for my work stuff. Will let you know how i make out.
    BTW the home/power reset didnt work, ive obviously tried this many times, and just now while writing this. Same issues.
      iOS 4    
    Adam Daley
    Posts: 3
    From: NY
    Registered: Mar 27, 2011
    Re: iPad 2 Camera - Doesnt Work
    Posted: Mar 28, 2011 6:44 PM     in response to: Adam Daley            
                Reply          Email
    So heres an update. I just restored the iPad so its back to factory default... and the camera is locking up now. I didnt even sync it, its brand new now... same issue
      iOS 4    
    David.Austin.Al...
    Posts: 11,820
    From: Monterrey, Estados Unidos Mexicanos
    Registered: Jan 15, 2006
    Re: iPad 2 Camera - Doesnt Work
    Posted: Mar 28, 2011 7:24 PM     in response to: Adam Daley            
                Reply          Email
    Take it back.
    Early '09 Mac mini - 8GB RAM, Early '06 17" iMac CD - 2 GB RAM   Mac OS X (10.6.6)   Happily using Macs since 1984!  
    marku819
    Posts: 1
    Registered: Mar 29, 2011
    Re: iPad 2 Camera - Doesnt Work
    Posted: Mar 29, 2011 7:48 PM     in response to: iscs            
                Reply          Email
    iscs, mine doesn't work at all, either, exactly same situation.
    iPad2 64GB wifi black   iOS 4    
    skigirlmle
    Posts: 1
    From: Glendora, CA
    Registered: Apr 1, 2011
    Re: iPad 2 Camera - Doesnt Work
    Posted: Mar 31, 2011 11:19 PM     in response to: Adam Daley            
                Reply          Email
    Same problem here. I got my iPad 2 today in the mail and the front facing camera hasn't worked at all. I wouldn't even know how to go about getting it exchanged
    iPad 2   iOS 4    
    crh24
    Posts: 654
    From: Oregon
    Registered: Feb 18, 2010
    Re: iPad 2 Camera - Doesnt Work
    Posted: Apr 1, 2011 2:20 AM     in response to: skigirlmle            
                Reply          Email
    skigirlmle wrote:
    Same problem here. I got my iPad 2 today in the mail and the front facing camera hasn't worked at all. I wouldn't even know how to go about getting it exchanged
    Take it to your closest Apple Retail Store. The Apple store locator says the closest one to Glendora is a few miles down 57 at the Brea Mall:
    Apple Store Brea Mall
    1065 Brea Mall, Space #1024A
    Brea, CA 92821
    (714) 255-5610
    27" i7 iMac 11,3 16GB 2.93GHz; 24" iMac9,1 3.06GHz 1TB-HD 8GB-DRAM;   Mac OS X (10.6.7)   AirPort Extreme; 13" MBP 8GB 2.53GHz; iPhone 4 32GB; 64GB iPad2 3G ATT; ATV2  

  • HT204053 for ipad2 Using the same Apple ID for Store purchases and iCloud (recommended) yes/

    hi i am shahram i have ipad2 for ipad 2 using the same apple iD for store purchases and iCloud(recommended) yes or no?

    That's what Apple recommend, it's also how I have mine set up. Although it isn't much of a problem to use a different account (ID) for each service.

  • I have just got my iPad2 and very pleased with it. I have a question regarding the monthly (recommended) battery full charge.  Should I let the battery completely die down to nothing at all or would this be bad for my iPad?

    I have just got my iPad2 and am very pleased with it. I have a question regarding the monthly (recommended) battery full charge.  Should I let the battery completely die down to nothing at all before I plug in to recharge or would this complete drain be bad for my iPad?

    It's not bad for it - on this page www.apple.com/batteries/ipad.html it says :
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

  • I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.

    I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.

    What is your brightness setting & how many apps are open?
    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Can anyone tell me or give me a link to the latest response from Apple regarding very real weak wifi signal on what seems to be a batch of both the new ipad and the earlier Ipad2. I have just bought a 2nd hand ipad2 and it has a very weak wifi signal

    Over the last week or so I have been trawling the internet looking for references to weak wifi signals on the Ipad2 and was staggered by the sheer quantity of people who seem to have identical issues, not just with the ipad2 but also with the new ipad. What annoyed me most from reading the reams upon reams of comments made on the Apple community forum is the fairly large number of people who seemed to believe that 'these' people were either just moaners and wingers or else they must have something wrong with their router set-up rather than a serious fault with their ipad and it seems all because there ipad in question works like a dream.
    Obviously I can only speak from my experience, and that is, I have an ipad2 32GB with wifi, purchased about 6 months ago and it works like dream with a good 2-3 bar wifi signal through 2 thick stone walls over 30 feet away. My router is a standard one supplied by my broadband supplier compatible with all 'g','b' and 'n' equipment. However, over a week ago now I bought second hand genuine ipad2 16GB with wifi from a close friend who has just purchased a new ipad3 to replace his old ipad2 (had it for over a year so no longer under warranty). When I started it up downstairs from my router, where I always use my other ipad2 which has a very strong wifi signal, I discovered that the new secondhand ipad2 I had purchased couldnt find a network signal at all. So after doing network resets and all other 'fixes' on the device recommended, I took it upstairs to my office where the router is based and found that the device could now locate the network, but the signal was lost over only 12 feet from the router!
    I quizzed my good friend about this issue and he informed me that it has always been like this since he first purchased it and he never thought that it was a fault, it was just the way it was. When he first aquired the device he did think at the time that this distance was poor, but thought nothing of it as he didnt have any other ipad to measur ethe signal strength against, and as his router was in his living room anyway he nothing of it. Fair enough.
    So, there we have it. One ipad2 with a very good wifi signal and another ipad2  with a very poor wifi signal running off the same router, both with the same IOS 5.0. ?
    As well as all of the other isues that customers have picked up on, such as 'death grip' (which I must say does appear to happen, but personally i dont think that this is a serious issue if you are aware of this issue and have a strong signal anyway), my experience seems to be a good  example of a 'duff' wifi ipad versus a 'great' wifi ipad', an issue confirmed by complaints from a fairly large number of customers who have also reported the same or similar weak wifi signals with both the ipad2 and the ipad3. So, as this shows the weak wifi signal is a very real issue it seems on a batch of ipad2 and 3's, which to my logic is obviously a hardware issue on a batch of early ipad2's and not a software one, otherwise all ipad's would suffer this problem! So, is it a faulty antenna or a faukty network card in an early batch?
    So, the bottom line now is, of course, firstly,  how can I get Apple to fix my other ipad2 when the warranty has run out? Any suggestions anyone?
    Personally I think good Apple customer service should offer a recall with a replacement on this apparent batch of ipads, dont you?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • I presently use iCloud and run a laptop PC plus an iPad2 and an iPhone 4.  I plan to travel and want to take my netbook, rather than the laptop PC for travelling.  How do I get my apple tools to work mwith a new, temporary PC?

    I presently use iCloud and run a laptop PC plus an iPad2 and an iPhone 4.  I plan to travel and want to take my netbook, rather than the laptop PC for travelling.  How do I get my apple tools to work mwith a new, temporary PC?

    ayorico15 wrote:
    It's not the pictures I'm worried about. I can get them off my phone without iTunes. 
    You can export ONLY Camera Roll photos and videos.
    ayorico15 wrote:
    All my apps were downloaded from my new apple ID. Not his.
    Sign in to iTunes Store (on desktop itunes) with your ID. Plug your iphone to itunes, right click on it and choose transfer purchases.Right click again and choose backup. Then you can sync with iTunes.
    ayorico15 wrote:
    It's not the pictures I'm worried about.  It's all my saved conversations
    Your conversations will not deleted if you sync with your iTunes.
    What is the problem with iCloud? iCloud has nothing to do with iTunes syncing.

  • Hi folks -ipad2 and iCloud storage....

    I've taken the plunge and have come over from the darkside and bought my first Mac device!
    I have a 16gb iPad2 and I want to use it primarily for photo work. I use Nikon DSLR cameras and want to load pics onto the 'pad (via the camera connection SD card reader), retouch and upload to iCloud to store them indefinitely in full resolution. I would then delete them from the 'pad (with the originals still on the SD card, which is backed up elsewhere) Is this possible? I don't think I want to make use of photostream's rolling access as I do not have any other mac devices. I guess I'll have to buy more storage? That's no problem though.
    Am I on the right track here? Be gentle as I'm a mac newbie!!
    TLG

    Welcome to the Apple community.
    Unfortunately, iCloud does not offer that sort of storage solution. You might try a third party solution such as dropbox or sugarsync. The iPad will do everything else through the new iPhoto app.

  • IPad2 and VGA/Video Mirroring...

    I'm a teacher with a VGA projector in my classroom. I really want to get an iPad2, but I've been holding out until I could justify the purchase by using it in class (Maps, Safari, Keynote, Pages, using the cameras to record video of the kid's projects, etc).
    I've been reading a lot of vague information about video mirroring, I realize that the HDMI adaptor will mirror my brand spanking new iPad to an HDTV, but that's worthless to me in the classroom. I've read a lot of people who think that video mirroring will work with the VGA adaptor and an iPad2. Can anyone definitively tell me that iPad2 and iOS4.3 will support video mirroring with the VGA adaptor so that I can use it with my classroom's projector?
    Please let the answer be yes, that would be awesome. If not... Can anyone think of a workable solution? HDMI adaptor --> HDMI Cable --> HDMI to VGA adaptor --> VGA cable?
    Thanks.

    Scroll down the page to Apple VGA Adapter. http://www.apple.com/ipad/accessories/
    It says, "Share what’s on your iPad screen with an even larger audience by connecting your iPad to a TV, monitor, projector, or LCD display that uses a VGA connector." That's full mirroring.
    This is a new description for the VGA Adapter, the old description is available if you click through to "buy now". The adapter appears to be the same, I think the difference will be iOS4 software that allows full mirroring.

  • HT4095 A video I paid will not download. I keep getting download error. I have an iPad2 and I have downloaded other movies since buying the one that won't. Please help.

    A video I paid will not download. I keep getting download error. I have an iPad2 and I have downloaded other movies since buying the one that won't. Please help.

    I would restore the iPod to factory defaults/new iPod on your computer and start over. It appears the iPod is associated with another account.  Any media that came with the iPod does not belong to you and di not transfer with the iPod hardware.

  • LR4 and Camera RAW Cache folder

    Hi all,
    I know many are complaining about LR4 responsiveness and how LR3 was faster in response.
    Like many others, I have a new and very fast PC, however it seems that LR4 is crawling when it comes to navigtaing through images.
    I've done my share bit of tweaking LR4 to get the best optimized results such as, Optimize catalogs, Render 1:1 previews, Increase Camera Raw cache size to 30GB, move the Camera Raw Cache folder next to the catalog folder as Adobe recommends and what not.
    LR4 didn't become more responsive, however I did notice something strange, which is the topic of this post.
    While filddeling around with LR4 performance issues on my PC, I've noticed that even though I have over 20,000 images in my PC and some folders are rendered with 1:1 previews, the Camera Raw Cache folder is empty.
    This might explain why rendering 1:1 previews didn't affect LR4 while browsing images.
    For example, right after I've created the 1:1 previews (whether it's straight from import or after the fact) I'm browsing back and forth during this browsing action, LR4 renders the 2 images each and every single time I view them - that beats the purpose of using the cache folder.
    So one comes to think how could it be that with such a catalog size and 1:1 previews, the camera raw cache folder remains empty? And could this be the cause that makes LR4 render each and every single image time and time again regardless if I viewed the image a second ago?
    Thanks.
    Gil.

    Firstly, to clarify, Previews and Camera RAW files are not the same thing. Previews are simple, just jpeg representations of the raw file, at various resolutions used principally in the Library module and filmstrip.
    Camera RAW cache files are used by the Develop module and contain the output from some initial RAW processing. I don’t remember exactly what processing but about half that LR needs to do to render an image. This processing is done regardless of what you actually do in the Develop module so it is done once, then cached. This is why the “Loading” appears to take longer when you initially browse to an image in the Develop module. The rest of the RAW processing (about half) is done every single time you browse away from the image and back again. This is why you always get CPU spikes when browsing through images in the Develop module. So you can create as many 1:1 previews as you like, this will have no impact whatsoever on image rendering performance in the Develop module.
    So to answer your question specifically,
    Can you be more specific about when exactly does this folder being populated?
    A camera raw cache file is generated when you browse to an image whilst in the Develop module. Files continue to be generated until the cache size limit is reached, then as new files are generated, the oldest are deleted.

  • IPAD2 and IOS 8

    I like many others on this site, have noted that their IPAD 2 has basically become unusable with IOS 8. Each new upgrade on IOS 8 has made it worse. The latest 8.1 has now slowed the IPAD 2 down to the point where there only use are as boat anchors. I went to the Genius Bar this weekend and they turned off all the possible memory suckers and it did not help. I did a complete erase and reset and it did not help. If apple did not test the new IOS 8 on their older products it was certainly poor planning. If they did test and released it anyway without a warning that it should not not to be used on their older products, then it was Apple basically sending out a virus to disable all their old products so people would have to buy newer ones.  If Apple doesn't fix this or put IOS 7 back up for use on their older products, I think a class action suite is in order. They had either intentionally or unintentionally disabled all their older products.
    Malodiver

    iOS8 - 8.02 are complete crap on the IPad 2 and IPad 3 for my family.  Definiitely worse on the iPad2 but also bad on the iPad3.  Clearly there is a huge power processing overhead required in comparison to iOS7.  I am trying 8.1 on my iPad 3 to see if it reduces the crashes but I also wish I could go back even though I like the IOS8 new features.  The iPad2 and 3 are basically too slow to be enjoyable on IOS8 even if crashes get fixed..  For that matter upgrading my deskdop to Mavericks slowed things down a lot.  It's all feeling like MS Vista when it came out.  I'm done upgrading Apple OS. 
    Apple has been pretty trustworthy in the past overall.  Apple should have warned users like I think they have for older iPhones not to "upgrade" to iOS8.
    Apple, Please redistribute and enable iOS 7.12 to earlier iPad owners without going thru all the complexities to do so.

  • HT4236 Have ipad2 & iPad camera connection kit - still doesn't download photos on SD card

    Plugged in SD card from camera to a newly purchased ipad2 via the new iPad camera connection kit and it will not download these photos. Tried the same on a friends ipad2 and it works fine. Do I need to download a new app or just update the photo booth that I already have?

    It doesn't go into photobooth. WHen you plug in the CCK and SD card it should open the photos app all on its own, open the card and then there'll be the select dialogue where you tap on the photos you want to import.
    Try resetting your iPad. Hold down the home and sleep keys, past when you see the red slider and until you see the silver apple. Let it reboot and try again.
    Since it works on another ipad, you know there's photos on the card and they're formatted right, along with the CCK working, so the issue must be your iPad. Sometimes there's a glitch and resetting helps that.

Maybe you are looking for

  • Error while trying to import Item in fusion DOO

    Hi, I am trying to import item in fusion DOO 11.1.5 using bulk import. However the import is failing with below mentioned error message: PRIMARY_UOM_CODE - The value of the attribute   Primary Unit of Measure is not valid. " Any idea what could be th

  • Regarding Interactive report

    Hi Experts, I am creating one Interactive report, my output is 2 fileds only let's say Col-A and Col-B I want when i will click on Col-A i SE11 will come and When i click on Col-B SE38 will come. Is it possible? Urgent............

  • How do I remove the autonumbering within Visio?

    I have inherited a file of Visio maps from a previous contractor who loved to use the Autonumbering feature.  Unfortunately, I now have to figure out how to get rid of a gazillion little numbers in the shapes. I know how to turn ON the autonumber fea

  • WRTU54G-TM Router Internet Problems

    I have a Linksys "Wireless-G Broadband Router with 2 Phone Ports" (WRTU54G-TM) that I got through the T-Mobile at Home service. I've been using this router for a while but it has given me a lot of trouble. Every 2 weeks or so, the phone connection an

  • ERROR IN BI PORTAL

    HI EXPERTS, Iam getting the following error when executing BI Queries, ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION Iam not able to resolve the issue and all the reports ar