IPad2 and iPhone4 upgrade to iOS 5.0.1 and iCloud-- duplicate app issues

I upgraded my MacBook Pro to lion a while back (have had lots of problems ever since, but that's another story).  Recently synced and upgraded my iPad 2 and iPhone 4 to iOS 5.0.1 and iCloud.  This has resulted in some of my apps on both devices seeming to have duplicates.  How can I determine if these are true duplicates and which can be eliminated?   How do I get rid of apps I don't want?

The easiest way is in iTunes.
In your iTunes Library, clickApps on the left hand side. That'll give you the full list, so the first thing you can see is whether you have duplicates in iTunes. I suggest you show the Version and release Date columns (right click a column header and choose them from the list) so you can see whether you have multiple versions.
If you have 2 the same, one might be for iPad and one for iPhone - not all apps are Universal.
Once you're happy that list is straight, connect the devices to iTunes, go to the Apps tab for each device, and uncheck the ones you don't want on that device
Hope that helps

Similar Messages

  • I downloaded the new iOS for my ipad2 and now my apps have no sound

    I have downloaded the new iOS for my ipad2 and now my apps have no sound and no system sounds

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
     Cheers, Tom

  • Upgraded to iOS6 on my iPad2 and all my apps quit

    Any app I launch on my iPad2 after the upgrade to iOS6 just quits.  NetFlix will launch then quit, same with Safari, Mail - ugh - Now what?

    Try turning your iPad off and on again.

  • I've upgraded to iOS 5 on my iPhone, now no apps will work at all - even ones I've downloaded after upgrade

    My iphone 4 won't run ANY apps now that I've upgraded to ios 5. Neither my older apps nor ones I've just downloaded - total nightmare!

    Unfortunately I don't have a solution, but I am having similar trouble.  On all my 3rd party GPS apps the GPS signal is very weak or not available.  Motion-X GPS, GPS Drive, Waze, Harry's Lap Timer.
       The Apple Maps app seems to work however I can't tell if it's using GPS or cell tower triangulation.  Maps seems to be slow to recognize my position or motion.   In the Maps app the purple arrow appears in the top bar, I'm all other 3rd party app the arrow is grey.  Does that mean anything?
    I've deleted and reinstalled apps, reset phone, no help.
    I'm using a 4s, 5.0.1

  • Hi folks -ipad2 and iCloud storage....

    I've taken the plunge and have come over from the darkside and bought my first Mac device!
    I have a 16gb iPad2 and I want to use it primarily for photo work. I use Nikon DSLR cameras and want to load pics onto the 'pad (via the camera connection SD card reader), retouch and upload to iCloud to store them indefinitely in full resolution. I would then delete them from the 'pad (with the originals still on the SD card, which is backed up elsewhere) Is this possible? I don't think I want to make use of photostream's rolling access as I do not have any other mac devices. I guess I'll have to buy more storage? That's no problem though.
    Am I on the right track here? Be gentle as I'm a mac newbie!!
    TLG

    Welcome to the Apple community.
    Unfortunately, iCloud does not offer that sort of storage solution. You might try a third party solution such as dropbox or sugarsync. The iPad will do everything else through the new iPhoto app.

  • Yosemite and iCloud Drive Performance Issue

    While on my home network that is connected to the Internet over FiOS 50 G bps, I upgraded my Mac Book Pro Retina from Mavericks to Yosemite.  The upgrade went smoothly.
    I first noticed that when I boot my Mac Book, it boots slower like Windows...
    When I took it into my office and used a slow WiFi hot spot, the system crawled.  Safari, Google, and other apps barely responded.
    During the upgrade, I "blindly" selected to use the iCloud Drive.   Foolish me!   I tried to turn it off, but then it warned me it would delete all documents on my Mac that are also stored on the iCloud. 
    How do I turn iCloud drive completely off when I don't want to use it and KEEP all my local files???    Later, I'd like to turn it back on when I'm on my faster network and THEN sync everything.
    Also, I started turning off specific Apps and rebooted.  Performance has improved.
    Regards,
    Nick

    But Is there an option to retain copies of the files that have been stored on iCloud?   I don't want to delete them.   Later, when I connect back to iCloud drive, if I have made any changes on any of these files on my Mac and they are newer than the version up on iCloud drive, it will automatically "sync up".....
    Thanks again,
    Nick

  • I have an IPAD2 that I upgraded to IOS 5.  There is no option to get newer episodes of podcasts from my Ipad.  Why the feature degredation ??

    I used to be able to sync my podcasts to my Ipad2 in the previous release of the OS via the "Get More Episodes option",  That option is not in the current os or if it is its not easily found.
    Why do I have to sync my subscribed podcasts via my PC for this supposedly syncless os ?
    Why was this feature removed?
    The whole purpose of me buying an Ipad was so I wouldn't have to keep things in sync via a PC.  The previous version of the OS did an excellent job of that.  Now I have to connect at least 1 time a week to keep up.
    This is a clear feature degridation and not a very good one, and I'm  NOT HAPPY AT ALL about this.  I'm actually glad my Ipod is generation 2 because at least its still useful on the previous OS. 
    I hope you fix this bug in an upcomming release. 

    I'm also on iPhone 4, iOS 6, and have exactly the same problem. I've tried resetting privacy settings, turning restrictions on and off, deleting and reinstalling apps. Nothing seems to work. The lists of apps in privacy settings are all empty, except for location services. When using Tweetbot the app is regularly asking for permission to access my twitter account, but even when I allow that, the app doesn't show in privacy settings. When I try to go into the camera roll from the Facebook app, the app tells me I have to allow access to the camera roll from the privacy settings - which I can't do since the app is not listed there.

  • After upgrade to iOS-6.1 not connecting to itune / apps store

    last night i have upgrade my phone and after that its not connesting to apps store  / itune.

    delete, then re-input your mail accounts.

  • Photos after upgrading to iOS 8 not uploaded to iCloud

    Before updating to iOS 8 I had in iOS 7 deactivated the service Photostream. All of my 200 photos I had stored only in memory of my iPad. After updating to iOS 8 I activated Photostream. The photo is there but not uploaded. They are still in the memory of the iPad. The new post-shooting photos uploaded to iCloud without problem. Is there any possibility of my 200 photos to get iCloud? Thank you and sorry for bad English.

    Same thing happened to me. I realized it was Foursquare the app that was consuming the location service constantly. I went to Settings > Privacy > Location Services and disabled Foursquare for location services.
    Maybe you have Foursquare or another similar app that's consuming the location service. Perhaps you should try disabling the apps in Location Services one at the time.
    Hope it helps!
    Regards.

  • Pages on ipad2 and icloud

    I just purchased pages on my Ipad 2 and the application is not showing up on iCloud.  Do I have to purchase pages twice - Once on my Ipad and Once on iCloud?
    thanks.

    That depends on which operating system you are using.
    If you are using 10.7, yes you need to download it as a pages document, edit it in pages and then put it back in iCloud by dragging it into the iCloud.com/pages window (be careful you don't get confused between old and new documents)
    If you are using 10.8, you don't need to use iCloud.com at all. Pages on your Mac will see the documents in iCloud and let you edit and save with down/up loading.
    This is what you will see in 10.8 when you open an iWork application. I'm using keynote again so as to be consistent with my previous image- but the same goes for pages)

  • Exchange and iCloud meeting request issue

    It Appears that when I receive a meeting invite through my work exchange account, it is depositing in my icloud and not my exchange acount.  THis is a problem as I do not have icloud on my work PC.  I have my icloud account the same as my work email account.  I was an option for use icloud for incoming invatations from other icloud members, but why would this overide Exchange?  Is that what is happeneing?  Any ideas

    Hi there
    I have just had a user flooded with the responses. Upon checking my logs, I traced this to Iphone 5C running IOS 7.
    In my case this behaviour is experienced on Exchange 2010.
    Regards

  • How to transfer music from PC to my iPad mini and iTunes Store app issue

    I am new with IPad mini, and have issues with music on device:
    A) I wonder whether I can transfer music from PC to device (A 1432) and
    B) I have problems 'approaching' iTunes Store app because it shows on screen interface for iTunes U app (which I downloaded previously and deleted it in the meantime because of this problems)...cannot shut it down because there is no way to exit this mode.
    hope someone will help so I can finally have some music on device.
    Thanks!

    Thanks a lot Ralph9430!
    I did manage to solve problem of music transfer iPad mini-PC, however I didn't succeed in approaching iTunes Store and there is nothing in the manual about it.
    When I open application I have iTunes U interface and cannot move anywhere but close app. I did try to re -enter pass and ID in iTunes Store app settings but nothing changed.
    Does anyone have any idea what to do in order to have approach to ITunes Store.
    Tnx!

  • Bar One and Zebra (Duplicate label issue)

    Hello,
    Can anyone tell me how to keep the zebra ZM4 from printing a duplicate label when I run my ABAP to print a bar code label it prints two.  Thanks.

    Hi Rich here is the SAP Script code.
    /:   NEW-PAGE                   
    /    ^XA                        
    /    ^XFZ_BARO-1.ZPL            
    /    FN999FD&V_DATA-LGORT&^FS 
    /    FN998FD&V_DATA-LGPBE&^FS 
    /    FN997FD&V_DATA-MATNR&^FS 
    /    FN996FD&V_MARA-MAKTX&^FS 
    /    FN995FD&V_MARA-MFRPN&^FS 
    /    ^PQ1,0,1,N                 
    /    ^XZ                        
    /    ^FX End of job             
    Here is the ABAP Code
    REPORT ZMMSBARC .
    REPORT:              ZMMSBARC
    DATE:                08/27/2004
    DEVELOPER:           Rashid K
    PROGRAM DESCRIPTION: This Program prints Material master
                          information and barcodes on
                          lables using Barone Software for barcoding.
    MODIFICATION LOG
    DATE        DEVELOPER    CORRECTION  DESCRIPTION
    08/27/2004  Rashid K     DEVK907935  Program Creation
    TABLES DECLARATIONS
    TABLES: MBEW,
            MARD,
            MARA,
            MAKT.
    VARIABLE DECLARATIONS
    DATA: V_MATNR(18) TYPE C.
    INTERNAL TABLE DECLARATIONS
    *Table to hold material inventory data
    DATA: BEGIN OF V_DATA,
               MATNR LIKE MARD-MATNR,
               WERKS LIKE MARD-WERKS,
               LGORT LIKE MARD-LGORT,
               LGPBE LIKE MARD-LGPBE,
               MFRPN LIKE MARA-MFRPN,
               MAKTX LIKE MAKT-MAKTX,
          END OF V_DATA.
    DATA: I_DATA LIKE V_DATA OCCURS 0.
    *Table to hold material master information
    DATA: BEGIN OF V_MARA,
            MATNR LIKE MARA-MATNR,
            MFRPN LIKE MARA-MFRPN,
            MAKTX  LIKE MAKT-MAKTX,
         END OF V_MARA.
    DATA I_MARA LIKE V_MARA OCCURS 0.
    *Selection screen.
    SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE TEXT-000.
    SELECT-OPTIONS: S_MATNR FOR  MARD-MATNR MATCHCODE OBJECT MAT1
                     OBLIGATORY,
                    S_BIN FOR  MARD-LGPBE,
                    S_WERKS FOR  MARD-WERKS OBLIGATORY,
                    S_LGORT FOR MARD-LGORT OBLIGATORY.
    PARAMETERS: P_DELETE AS CHECKBOX.
    SELECTION-SCREEN END OF BLOCK 1.
    EVENT: INITIALIZATION
    INITIALIZATION.
    EVENT: START-OF-SELECTION
    START-OF-SELECTION.
    *Select data from inventory table, sto loc level
      SELECT MATNR
             WERKS
             LGORT
             LGPBE
             FROM MARD
             INTO TABLE I_DATA
             WHERE MATNR IN S_MATNR AND
                   WERKS IN S_WERKS AND
                   LGORT IN S_LGORT AND
                   LGPBE IN S_BIN AND
                   LVORM = P_DELETE.
      DESCRIBE TABLE I_DATA LINES SY-DBCNT.
      IF SY-DBCNT = 0.
         MESSAGE I001(ZV).
         EXIT.
      ENDIF.
    *select material master data
      SELECT MARA~MATNR
             MARA~MFRPN
             MAKT~MAKTX
             INTO TABLE I_MARA
             FROM MARA INNER JOIN MAKT ON
                 MARAMATNR = MAKTMATNR
             FOR ALL ENTRIES IN I_DATA
             WHERE MARA~MATNR = I_DATA-MATNR.
    EVENT: END-OF-SELECTION
    END-OF-SELECTION.
      DATA V_PRINTER LIKE ITCPP.
    *open form for writing
      CALL FUNCTION 'OPEN_FORM'
           EXPORTING
                FORM                        = 'Z_INV_LABEL'
           IMPORTING
                RESULT                      = V_PRINTER
           EXCEPTIONS
                CANCELED                    = 1
                DEVICE                      = 2
                FORM                        = 3
                OPTIONS                     = 4
                UNCLOSED                    = 5
                MAIL_OPTIONS                = 6
                MORE_PARAMS_NEEDED_IN_BATCH = 7
                INVALID_FAX_NUMBER          = 8
                OTHERS                      = 9.
      IF NOT V_PRINTER-TDPRINTER CS 'ZLB'.
        MESSAGE I000(ZV) WITH 'Printer'
                               V_PRINTER-TDDEST
                              'is not a label printer.'
               'Choose the correct output device to contiune.'.
        EXIT.
      ENDIF.
    Loop at data to write.
      LOOP AT I_DATA INTO V_DATA.
    Get material master information
        READ TABLE I_MARA INTO V_MARA WITH KEY
                          MATNR = V_DATA-MATNR.
        CHECK SY-SUBRC = 0. "Ensure material master record exists
    *Code to delete leading zeros in material number
    IF V_DATA-MATNR(1) CS '0'.
        PACK V_DATA-MATNR TO V_MATNR.
    ELSE.
       MOVE V_DATA-MATNR TO V_MATNR.
    ENDIF.
        SHIFT V_MATNR LEFT DELETING LEADING SPACE.
        WRITE V_MATNR TO V_DATA-MATNR.
    *Write to sap script form
        CALL FUNCTION 'WRITE_FORM'
             EXPORTING
                  WINDOW                   = 'MAIN'
             EXCEPTIONS
                  ELEMENT                  = 1
                  FUNCTION                 = 2
                  TYPE                     = 3
                  UNOPENED                 = 4
                  UNSTARTED                = 5
                  WINDOW                   = 6
                  BAD_PAGEFORMAT_FOR_PRINT = 7
                  OTHERS                   = 8.
      ENDLOOP.
    *close form from writing
      CALL FUNCTION 'CLOSE_FORM'
           EXCEPTIONS
                OTHERS = 1.

  • Drag and drop/duplicate warning issues

    I am finding itunes extremely frustrating at the moment. For some reason its not telling me when I am about to add the same song to my library. I am cleaning up my folders to save space. I am pretty sure that in the past i have been able to selct an album, drag and drop it into my itunes library and if it was already there itunes would warn me. Then i could just delete the album in the knowledge that i have it in my itunes library. I have just drag and dropped the exact same song in to my library 3 times with no warning. Why? Is there a setting that I have missed? I am using itunes 11.1.5. Thank s in advance

    Please provide more details and/or examples.
    Ciao.

  • Since moving to OSX Lion and iCloud Mail App i faulty

    Apart from crashing constantly, it ignores the rules I created to deal with my email, and often refuses to Quit when I type "command-Q".  I have to force quit, after which it then won't open until I completely reboot my laptop. 

    Try this:
    http://swcdn.apple.com/content/downloads/37/23/041-5058/lr5tynbldi18zcrqo8a8uq88 rnjushqliu/Safari6Lion.pkg
    If you have another browser, go there. If not, save it to a usb from another pc or mac.
    the link is to the apple's software update site.

Maybe you are looking for