Ipad2, AppleTV2, WiFi. The mix doesn't work

Hi
When I try to connect my iPad2 to an Apple TV2, the wifi connection breaks down. Everytime. Sometimes it works only with the app "Immage" but never with Video or other else.
I've a MacBook Pro 15 (OS 10.6.8) but it works great with AppleTV2 and AIrPlay. The problem appears only when I try to use AirPlay between Ipad2 and AppleTV2.
AppleTv 2 - OS 4.4.2
IPad         - OS 5.0.1
WiFi connection in "G" mode.
Thanks

I thought about it but it's a telephone company's router. And It doesn't explain why the system works between MacBook pro and AppleTV2.
Thanks

Similar Messages

  • Ipad2 has wifi connection but the internet doesn't work

    I use my ipad2 at home with the wifi. I have nothing changed but now the internet doesn't work. The ipad shows me the wifi connection but i cannot receive email and the safari doesen't work too.

    This Apple doc may help:
    iOS: Troubleshooting Wi-Fi networks and connections
    ...Found via this page:
    http://www.apple.com/support/ipad/

  • In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    Hello Kiira Doon,
    The troubleshooting steps detailed below may help get your iPhone's display to function.
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    My issue is still not resolved. What do I do next?Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • My iPod 5th gen connects to wifi but the internet doesn't work.

    So we were watching netflix on the ps4 and something happened and now my ipod will connect to the wifi but the internet doesn't work. everything else connects just fine to the internet just not my ipod. I've renew my lease, reset my settings and network, forgot my network and rejoined,  turn my ipod completely off and back on, turned my wifi off then back open. The IP address is 192.xxx.x.xx
    its the ipod 5th generation 16gb.  With the latest update

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

    Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

    Hi, KK93. 
    Sometimes a simple power cycle of the router and Mac can resolve the issue.  However, try the steps in the article below to troubleshoot the Wi-Fi issue with your MacBook.
    Troubleshooting Wi-Fi issues in OS X
    http://support.apple.com/kb/HT4628
    Also, see the article below to make sure the router setting have been optimized for performance.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Cheers,
    Jason

  • TS1398 What would be the reason why when i try to connect my iphone to a wifi server; it doesn't work? It also doesn't pick up any wifi connections.

    What would be the reason why when i try to connect my iphone to a wifi server; it doesn't work? It also doesn't pick up any wifi connections.

    go to settings>general> reset network connections  and then try again

  • ITunes genius mix doesn't work properly

    Hi everybody,
    On my late 2006 iMac with iTunes10 Genius Mix doesn't work properly.
    After having activated Genius iTunes generates a number of mixes with different music styles.
    When I scroll over the squares the play sign shows up, but only work for 1 of the 9 mixes when I click the play sign.
    Clicking on the other play signs in the other squares does not do anything.
    Does anybody know what is wrong here?
    Thanks!
    PT

    I now know what is causing the problem, at least for the singer in question, but I don't know how to overcome it. I now know that the problem started when I downloaded an MP3 album from Amazon. This album contains 25 songs sung by 25 singers, INCLUDING Annette Hanshaw,THE SINGER I'M INTERESTED IN AT THE MOMENT. So, when I do an iTunes' search for Annette Hanshaw, I get her, but I also get all the other singers on this album. This puzzles me. I've downloaded many entire albums, but I've never run into the unwanted linkages before. In other words, I want to keep all of the songs in the album I just downloded, but I only want Annette Hanshaw when I put her name in the SEARCH bar. Is there a way to do this?
    Are all the songs in all Amazon MP3 albums linked together in this way?

  • I am connected to wifi but Internet doesn't work.

    I am connected to wifi but Internet doesn't work. Software updated and settings reset. Still no luck. I pod touch

    Despite the connection indication you may not really be connected to your WiFi network.
    Your router may not have given your iPod a valid IP address. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • Wifi and bluetooth doesn't work on my iphone 4s

    Wifi and bluetooth doesn't work on my iphone 4s ios 6.1.2 since 1 month! Please help

    Hi!
    I had the same problem, after trying all resets and sugestions the problem persisted.
    I took it to my carrier and they done their own test and gave me a new iPhone. Simple.
    Problem solved!
    If your Iphone is under warranty don't worry about it. But try a hard reset.
    Good luck!

  • My ipod touch 3G the bottom doesn't work. How do i fix it?

    Everything on the top works. From the bottom, its slowly moving up. now i'm not able to slide to unlock it.

    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • HT1657 I rented a movie and the sound doesn't work, how do I fix it?, who do I direct to for a complaint?

    Hi, I rented warhorse HD, and the sound doesn't work, my itunes version is 10.6.1(7). How do I fix it or who do I direct to get my money back? Thank you

    I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

  • My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

    My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

    I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited.  In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items.  I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible.  I simply deleted that item and now I don't have the situation you described and my wireless is connected.  Hope this helps!

  • Does anyone else have two Apple IDs? I can't get rid of one of them. It's associated with my iCloud account and I can't fix it. The password doesn't work.

    So, apparently I have two Apple IDs associated with my iPhone. One is an old aol address that got hacked and was shut down. Even aol doesn't recognize the email address anymore, and the password doesn't work. It's associated with my iCloud account, so now I can't access that account. My other Apple ID is with everything associated with my iPhone and everything works just fine. But now I can't get to my iCloud stuff. Has this ever happened to anyone else. The guy at the Apple store says he's never heard of it.

    Does the alert refer to "Local Items?"

  • I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymor

    I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymore. My computer doesn't want to read it anymore. I want to mention that I also tried on some other computers and still the problems continues. How can I solve this? On the Adobe webpage I can't find anymore the download for Adobe CS4. Thanks. Marius Lupu

    You can download the software from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and can serialize it with the serial number you have.
    NOTE:- READ THE INSTRUCTION PROPERLY TO AVOID ANY ERROR.

  • Count(*) in the loop doesn't work and I really don't know why...

    Hello,
    I can't figure out why the following doesn't work. I cannot debug for I do not have privileges on this server.
    The execution always fails on bolded line. If I substitute the variable with the table name itself it works. The variable is properly populated in each of the iterations as I can see it by using dbms_output package. The small but may be important detail may be I am connected as user A but the tables are in the schema B. However I can list the tables and their columns in all_tab_cols view and there are synonyms made in my schema which allow me to access the B tables without prefixing them.
    I get the error:
    Error report:
    ORA-00900: invalid SQL statement
    ORA-06512: at line 26
    00900. 00000 - "invalid SQL statement"
    *Cause:   
    *Action:
    I ran out of ideas and I do not have access to any of the Oracle instance to be able to debug right now.
    Variable type for v_tables is wrong? I do not have some magic privilege to use execute immediate with variable?
    Oracle server has a bad day today?
    The crap is 11.1.0.7 if it has anything to do with my problem.
    Please help if you can.
    Grzegorz
    declare
    v_number number := 646989;
    v_current_table nvarchar2(50);
    v_itemno number;
    type t is table of nvarchar2(50);
    v_tables t;
    begin
    dbms_output.put_line('Working...');
    select table_name bulk collect into v_tables from all_tab_cols where column_name = 'ITEMNO' order by table_name;
    for i in 1 .. v_tables.count loop
    dbms_output.put_line('Number: ' || i);
    v_current_table := v_tables(i);
    <b>execute immediate 'select count(*) from ' || v_current_table || ' where itemno = :a' into v_itemno using v_number;</b>
    if (v_itemno > 0) then
    dbms_output.put_line('Current table contains specific ITEMNO: ' || v_current_table);
    end if;
    end loop;
    end;

    In SQL Plus run this and see what SQL is your code returning. Then execute the SQL individually.
    set serveroutput on
    declare
         v_number number := 646989;
         v_current_table nvarchar2(50);
         v_itemno number;
         type t is table of nvarchar2(50);
         v_tables t;
         lSqlString varchar2(20000);
    begin
         select table_name
           bulk collect into v_tables
           from all_tab_cols
          where column_name = 'ITEMNO'
          order by table_name;
         for i in 1 .. v_tables.count loop
              v_current_table := v_tables(i);
              lSqlString := 'select count(*) from ' || v_current_table || ' where itemno = :a';
              dbms_output.put_line(lSqlString);
              --execute immediate  lSqlString into v_itemno using v_number;
         end loop;
    end;

Maybe you are looking for