Ipad2 battery reading changes after reboot

Any reason for this behavior??

I would agree with your thoughts, but in my case the reboot always provides a highter percentage than before the reboot, not a lower percentage.

Similar Messages

Raw device owners change after reboot the server

The raw device owner change after reboot the server. i have to adjust it manually like
chown oracle:oinstall /dev/raw/raw*
any idea to make it permanent after bouncing the Server?
MY OS is RHEL4 & Rdbms 10.2.0.1

I got my answer .
New to Linex. Need suggestions...
How i can create new file ? like i want to create file oracle.permission
should i use this command
touch <filename> or any other command?
second i want to put these entries raw device 3, 6,7,10,11 etc
shoud it work ? like in the oracle.permission directory?
# ASM
raw/raw[3671011]:oracle:dba:0660

Portcost value changes after reboot on Cat OS

here is the command on my switch
set spantree portcost 3/1-48 3019
after reboot have noticed many times.. the value changes to someother random value..
Can any one explain whats the reason behind this..
Thanks.
Mahesh.

Hi Mahesh,
Howdy!!
Can you please confirm that after reboot there is a change in path cost of port cost. As you have manually configured the port cost is should not change for that switchport but yes path cost may change after reboot as switch may found some other best path to reach the root bridge. All depends on topology and your network design.
Just want to confirm when the switch is rebooted does the value you have configured in the command changes in your config or you are checking this with a "sh spantree" command?
Regards,
Ankur

Links to Folders on a external drive changed after reboot

I've got the following problem:
I've created some links to folders on a external (Firewire 800, Lacie 2big Quadra) drive in my Finder.
At first glance they are working fine and looking good, listened under places.
But after Reboot the links are changed to random files or folders on my usual Mac HD. The links pointing to folders on the internal HD are working fine!
For example:
before: "Work, Projects, Invoices" – after: "proloj.msd;italianWS;logqhrscv.ll"
This happened (almost) everytime, so i can't really work with my places
I tried to start the external drive up, before the Macbook starts, but no change.
Is this a Finder bug or a problem with the external HD? Otherwise it's working very well. I heard some Rumours about the latest 10.5.6 Update and Problem with the finder?
BTW - i got all updates from Apple

It happened again – but now i got pictures
After freshly adding the links:
http://dort.entlang.com/before.png
And after reboot:
http://dort.entlang.com/after.png
And the new links are not so random as it seems! "lpoptions.1.gz" is always the first entry.

[SOLVED] Permission for a file is changing after reboot

I know it may seem to you like a silly question, but it's a terrible problem for me. I tried to change permission for a file using chmod 660 and it changed of course ( I did it as a root ), but after reboot it resumed to the previous state. It's rather critical file form /proc/acpi/video/... and I need it for brightness manipulation. It's a file with a direct access to my hardware, so I think there's somewhere protection mechanism in Arch and I don't know what should I change.
Thanks in advance
Last edited by Gooru (2010-10-25 17:43:03)

Although this works, surely changing the permissions on every boot is a little backwards.
As far as I'm aware it's permissions are set like that for a reason - it's a hardware control and as such should only be touched with privileged permissions (root). The 'real' way to do this would probably be to use sudo and set up the sudoers file such that you don't need to use a password as a regular user.
That's just my two cents though... and if I'm honest, it's just me being really pedantic you can do it how you like!

SNMPv3 config changing after reboot

Whenever one of my C2960's reboot, our Solarwinds monitoring stops working. I found that this is due to one line of SNMPv3 config changing by itself. This used to be in the config:
     snmp-server group XXX v3 priv access permit-snmp
(permit-snmp being the access-list defining ip addresses allowed to query) After the reboot, snmpv3 stops working and this line shows up in the config instead of the one above:
     snmp-server group XXX v3 priv notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF7F
Is this a bug? (I did check the bug database, without success.) I have upgraded the IOS to 12.2(53) SE2 without any success. The switch is a C2960-24TC-L.

I had the same problem and believe the issue is that you probably have a trap server configured and are using the same snmp-server group for the trap server and your queries. I created another group for SNMPv3 queries and the configuration no longer seems to get overwritten. Here's what I did.
Go into config mode and create a group just for the trap server - let's call it TRAPS. I used priv and it looks like that's what you use. Don't worry about defining any MIB views as this group will automatically populate the notifyview once the trap servers below are added to the config. (...and will remove the readview and writeview entries after reboot - that's why a second group is needed). Remove your old trap server entries and set up the new trap server using the new group called TRAPS.
snmp-server group TRAPS v3 priv
snmp-server host version 3 priv TRAPS
Now create another group for queries only - (let's call it QUERIES but you could just use your current group XXX since it's already set up) - I like the v1default MIB view for both reads and writes but you can limit the MIBs with the snmp-server view command. I am using md5 and des56 here - your case may be different - and set up the user (or keep the one you already have configured)
snmp-server group QUERIES v3 priv read v1default write v1default access
snmp-server user QUERIES v3 auth md5 priv des56
Exit and check the config.
The group TRAPS should have the notifyview set. The group QUERIES should have the readview and writeview set to v1default (or whatever view you chose to enter here). The two SNMPv3 groups should look like this:
#sh snmp group
groupname: TRAPS                            security model:v3 priv
readview :           writeview:
notifyview: *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.F
row status: active
groupname: QUERIES                          security model:v3 priv
readview : v1default                        writeview: v1default
notifyview:
row status: active      access-list: 4
The old trap server entry using the old group XXX should have been removed already. Verify that the user: entry says TRAPS
#sh snmp host
Notification host: xxx.xxx.xxx.xxx      udp-port: 162   type: trap
user: TRAPS     security model: v3 priv
Finally make sure the user is in the correct group (QUERIES):
#sh snmp user
User name:
Engine ID: xxxxxxxxxxxxxxxxxxxxxxxxxx
storage-type: nonvolatile        active
Authentication Protocol: MD5
Privacy Protocol: DES
Group-name: QUERIES
If all is well - write the config. You should now be able to perform a coldstart without losing your SNMPv3 config.
Please, let me know if this worked for you.

Video Scope reading changes after render

I'm having problems with my wave form monitor changing after I've rendered video. I applied a proc amp filter to a video clip and made the adjustments that I wanted according to the levels on the wave form monitor. After I render the clip, I notice the levels revert back to the old readings on the wave form monitor, but the actual numerical values set in the proc amp filter seem to remain the same. Also, as far as I can tell the actual video is not effected and still has the proc amp settings applied to it. Any idea what may be causing this?

Try changing your render setting. Go to the Video Processing tab in the Sequence Settings and change it from Render in 8-bit YUV to Render all YUV material in high-precision YUV. I had what sounds like a similar problem where I color corrected a clip with the 3-way, but after I rendered the black level jumped back up about 5 points. Switching to the high-precision settings fixed it. That might work for you.
Hope that helps.
jesse.

RV180 CSR is changed after reboot

I find that RV180 changes its CSR (cert signing request) after a reboot. This causes my cert to fail to upload.
Power up RV180
Create a CSR
View CSR (copy-n-paste into text file)
Power down RV180
Take CSR to Microsoft CA server to sign. Get cert in return.
Power up RV180
Upload cert. FAILED.
Open CSR in RV180.
Found CSR is different from that in step 3
If I change the workflow, it works:
Power up RV180
Create a CSR
View CSR (copy-n-paste into text file)
Take CSR to Microsoft CA server to sign. Get cert in return.
Upload cert. PASSED.
Open CSR in RV180.
Found CSR is same as that in step 3
The only difference in the two workflows is reboot the RV180. All this is happening on firmware 1.0.3.10.
On the out-of-the-box firmware 1.0.0.x, there is no issue.
CSR before reboot
-----BEGIN CERTIFICATE REQUEST-----
MIHJMHUCAQAwEDEOMAwGA1UEAxMFUlYxODAwXDANBgkqhkiG9w0BAQEFAANLADBI
AkEAz46n5j/6AtcVLzQdqMpf7QnyvdNk2nofmj2CZifRgMO2NMz+PWgZ+otipWmS
Yt+IJTxnB39BwLA01KFiouWwfQIDAQABoAAwDQYJKoZIhvcNAQEEBQADQQAMcPbJ
9CEKKIi8TU1a2GFB4QRoO37b+CE9Z386VbbFDzz+xgATJPP6eYwETvYmRBH1Ffhv
iqyv9JRMqts79l9W
-----END CERTIFICATE REQUEST-----
$ openssl req -text -noout -verify -in a.txt
verify OK
Certificate Request:
Data:
Version: 0 (0x0)
Subject: CN=RV180
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
RSA Public Key: (512 bit)
Modulus (512 bit):
00:cf:8e:a7:e6:3f:fa:02:d7:15:2f:34:1d:a8:ca:
5f:ed:09:f2:bd:d3:64:da:7a:1f:9a:3d:82:66:27:
d1:80:c3:b6:34:cc:fe:3d:68:19:fa:8b:62:a5:69:
92:62:df:88:25:3c:67:07:7f:41:c0:b0:34:d4:a1:
62:a2:e5:b0:7d
Exponent: 65537 (0x10001)
Attributes:
a0:00
Signature Algorithm: md5WithRSAEncryption
0c:70:f6:c9:f4:21:0a:28:88:bc:4d:4d:5a:d8:61:41:e1:04:
68:3b:7e:db:f8:21:3d:67:7f:3a:55:b6:c5:0f:3c:fe:c6:00:
13:24:f3:fa:79:8c:04:4e:f6:26:44:11:f5:15:f8:6f:8a:ac:
af:f4:94:4c:aa:db:3b:f6:5f:56
CSR after reboot
-----BEGIN CERTIFICATE REQUEST-----
MIHJMHUCAQAwEDEOMAwGA1UEAxMFUlYxODAwXDANBgkqhkiG9w0BAQEFAANLADBI
AkEAuVXZl+Y+eE7xQKoq9Zn2t+InYE+GCdbESZN2/tqSjY1s+dQ5cEnRKmVdN96Z
HOle0h8+MnT/kXqKn4KpzxZe0QIDAQABoAAwDQYJKoZIhvcNAQEEBQADQQAMCjHx
SwP6MG3x4ri/Ips69ZvHL/EGGozH0kw0FkTRvx5ZKK4DWhbFDC/DmVYXN4CR+m10
oHOZm2jfFRShD+OE
$ openssl req -text -noout -verify -in b.txt
verify OK
Certificate Request:
Data:
Version: 0 (0x0)
Subject: CN=RV180
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
RSA Public Key: (512 bit)
Modulus (512 bit):
00:b9:55:d9:97:e6:3e:78:4e:f1:40:aa:2a:f5:99:
f6:b7:e2:27:60:4f:86:09:d6:c4:49:93:76:fe:da:
92:8d:8d:6c:f9:d4:39:70:49:d1:2a:65:5d:37:de:
99:1c:e9:5e:d2:1f:3e:32:74:ff:91:7a:8a:9f:82:
a9:cf:16:5e:d1
Exponent: 65537 (0x10001)
Attributes:
a0:00
Signature Algorithm: md5WithRSAEncryption
0c:0a:31:f1:4b:03:fa:30:6d:f1:e2:b8:bf:22:9b:3a:f5:9b:
c7:2f:f1:06:1a:8c:c7:d2:4c:34:16:44:d1:bf:1e:59:28:ae:
03:5a:16:c5:0c:2f:c3:99:56:17:37:80:91:fa:6d:74:a0:73:
99:9b:68:df:15:14:a1:0f:e3:84

Hi ballerinasnoopy,
When you restored the device, it updated the iOS on the iPod to iOS 7. There is no way to go back to the old look. Sorry....
Cheers,
GB

Mac's clock being changed after rebooting from XP in FAT32

Hi everyone, I understand that some people have issues with boot camp not being able to find Windows during startup while holding the 'Option' button - I'm stucked with that too unfortunately. But here's another thing, has anyone notice that the clock under Mac would constantly change after it is loaded back in Leopard, after using XP? I seem to have this problem. After finishing using Windows and booting back into Mac using the BT's control panel, my Mac's clock is like a few hours behind and I constantly have to click on it to change it back. Funny no? Anybody having this issue - using the FAT32 or NTSF format?

Lol.
I'm sorry but that genius is waaaay off. it has nothing to do with windows, it has to do with the way EACH OS stores the time in the hardware EFI/BIOS
Its a known issue with using two different platforms
OSX reads time for the time zone its selected windows doesnt think it needs to change all the time, so it creates its based off the previous changes in BIOS/EFI
The time should auto-adjust in Windows/OSX or just click Update Time in either
icrosoft Windows and Mac OS X operating systems handle your computer's date and time information differently, so the date and time may be different when you switch operating systems. For best results, use a network time server and resync the date and time whenever you switch operating systems. In Mac OS X, use the “Set date & time automatically” option in the Date & Time preferences. In Microsoft Windows, click the Update Now button in the “Date and Time Properties” control panel.
http://docs.info.apple.com/article.html?artnum=303572#faq0

Hwmon[0-3] not persistent, changes after reboot

I have a problem with conky, which refuses to start because it can't find my hwmon sensors.
ls /sys/class/hwmon/ -al
total 0
drwxr-xr-x 2 root root 0 2009-09-12 15:48 .
drwxr-xr-x 37 root root 0 2009-09-12 15:48 ..
lrwxrwxrwx 1 root root 0 2009-09-12 15:50 hwmon0 -> ../../devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/ATK0110:00/hwmon/hwmon0
lrwxrwxrwx 1 root root 0 2009-09-12 16:08 hwmon1 -> ../../devices/platform/coretemp.0/hwmon/hwmon1
lrwxrwxrwx 1 root root 0 2009-09-12 16:08 hwmon2 -> ../../devices/platform/coretemp.1/hwmon/hwmon2
lrwxrwxrwx 1 root root 0 2009-09-12 15:50 hwmon3 -> ../../devices/platform/w83627ehf.656/hwmon/hwmon3
These symlinks seem to change after each reboot. So when I refer to hwmon3 sensor 2, this sensor might suddenly point to coretemp.0 instead of w83627ehf.656.
Is there any way to make hwmon[0-3] always point to the same sensor? Thanks.

coretemp.0 is the name of a directory in /sys/bus/platform/devices/
temp = show the temperature
1 = sensor number inside the directory coretemp.0
ls /sys/bus/platform/devices/
Lists all the sensors you can use. For example, if you want to use coretemp.0, you add the following to .conkyrc:
${platform coretemp.0 temp 1}
So if you use:
${platform coretemp.0 temp 1}
Conky will show the value of:
/sys/bus/platform/devices/coretemp.0/temp1_input

Iphone battery draining fast after reboot

hi, my iphone battery drains completely from 100% to 0% in a few hours if I switch the phone off and turn back on. i recently found this out once after I switched off the phone.....But there is no problem (battery can last 1~2 days for normal use)if i do NOT switch off after recharge.
Is this a software issue or hardware?? Has anyone got the same problem? Thank you so much.

HeffRaleigh wrote:
A couple more diagnostic tidbits.....my iPhone exhibited odd behavior after downloading the Star Gazer app from the App Store on Sunday. I activated the "arrange icon" feature to move the app icon for Star Gazer to a new position on my iPhone and after I moved it the icon for the app next to it (Weather Channel App) was absent but the label was present. When I slid my app screen back to the home screen and came back, the Weather Channel App icon was visible and the Star Gazer app was now absent but the label was present. I've also had some odd flashes of the home screen after unlocking my phone (I have it secured with a PIN to protect my data). Is this and IOS 4.1 issue?
It is not an iOS 4 issue; it is a very rare problem, and has occurred with all versions. But if you search you will see reports are in the dozens, with 100 million phones in use that's a vanishingly small number. It usually means that memory in the phone is corrupted. If rebooting the phone doesn't fix it you should restore the phone using iTunes.

My external Firewire drive keeps coming up as read only after reboot.

Hello everyone,
I have a perplexing problem that just cropped up yesterday. I have an iMac (9,1) running Mac OS X 10.6.7. I've had the machine about a month now. I have an external 500GB Firewire 800 drive that holds all my iTunes music files. This was previously an internal drive in my G4MDD that I installed in an external exclosure I got from OWC. It's an EZ QUEST enclosure with an Oxford chipset. The drive is formatted Journaled HFS+, and I had reformatted it and copied all my files back over using Carbon Copy Cloner when I installed it in the enclosure. The drive is set in the Get Info window to "ignore ownership on this volume", and I have read/write permissions on the drive and the enclosing folders, including the iTunes folder. I can read the files, just not write to any directory on the drive.
Everything had been working as expected until yesterday when I started up the Mac and went to download a Podcast. The Mac informed me that it couldn't download the file because I didn't have write permissions. I checked the drive in the Get Info window, and everything was set correctly, but I noticed that I couldn't change the ownership options, as they were grayed out.
I fixed the problem by running DiskWarrior 4.2 on it, and rebuilt the directory. After that the drive was fine; until I started up today and was faced with the same situation. I was able to fix it again in the same manner, but would like to get to the bottom of the problem. A few other bits, the drive was recently defragmented with Drive Genius 3.1, and both that and DW and Disk Utility say the volume is OK.
I've been using Macs professionally and at home since '93 and this is my 5th Mac since that time. So I know my way around them, and I'm stumped!
Any ideas?

Oh, as part of this, not sure when the change was made, OSX used to keep the mounted volume name in /Volumes, even if the volume was ejected. Would cause an occasional problem - but very rare. I notice now that ML seems to create/delete these mountpoints automagically - and that's part of the problem. They get incorrect permissions when the volume mounts, and I (user I'm logged in as), can't write to the volume without some background shenanigans.
My process is this:
Unmount problem volume
Drop to terminal, and "sudo mkdir /Volumes/<mounted_volume_name>"
Remount volume via Disk Utility (you now get a "<mounted_volume_name> 1" - with CORRECT permissions)
Unmount the volume again
Remove the created directory (i.e. undo step 2)
Remount the volume - 99.9% of the time that seems to fix it.
Reboot to be sure - and it stays for a while - then at some point becomes a problem again.
Not sure if it's something in ML that's an issue - or something in iTunes or iPhoto (but can't see how they would affect the permissions when the system reboots and you login)

Display settings change after reboot

Thinkpad T400: 7417CTO
Windows XP Pro w/SP3
No docking station
I configure the extended desktop for external monitor and thinkpad LCD (both 1280 x768).
After I reboot for the first few seconds I see the display as pre-boot, then the displays are reconfigured for
single image at 800x600.
What is causing the display settings to change?
How do I prevent the display settings from changing?
Thank you,
Morris

hey p26grinz,
without the external monitor and after setting the display, will the setting remain ?
have you tried uninstalling the graphic driver from your unit and then testing it with generic driver ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Who do "open with" defaults change after rebooting??

All,
I tried to launch this question in different words before but somehow never got a reply.
I know in "get info" you can supposedly change the default with "open with ---> change all".
Supposedly.............it works, until you reboot.
I want NOT to use preview to look at pictures because I do not like the fact that you can`t work with the arrow "next / last" or with the keyboard arrows.
Now people already explained to me how to select all pics in preview etc, but that´s too complicated for just looking at a few picture quickly. Also it´s not my question.............
My question is: how do I change my default picture viewer for good??
I tried it the windows way............right click on a picture, open with and tick the box "always open with" at the bottom but that don´t work either, I´m afraid.
I spent 2 hours trying............I even deleted Preview from "programs" but this defaults to a picture adjustment program..........still not what I want.
I like Xee, went into preferences of "Xee", ticked the files that it has to open, it works fine............until I reboot. Am I the only one in the world that struglles with this??
Please Apple-gurus...........help me!!
Surely Leopard hasn´t got this error?? Why bother with an "open always" button if it gets reset as soon as I happen to switch off my Macbook Pro??????
Does Snow Leopard change this perhaps??
Cheers,
Not a Clue.

Well, not exactly. You said you tried using Open With, but that could have been from the contextual menu as opposed to using Get Info. I interpreted the former from your post.
If they are not permanently changed it could be for a variety of reasons. One is the filetypes/extensions are not similar. For example changing the default for a .doc file is not the same as changing the default for a .docx file. Also changing the default for a document without an extension isn't likely to work. To work properly the document file must have the normal extensions assigned by the default application that opens that file.
Another possibility is a problem with the LaunchServices database. You can try resetting it as follows:
Rebuild LaunchServices Database
For Tiger users
Open the Terminal application in your Utilities folder. At the prompt paste in the following command in its entirety:
/System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServic es.framework/Support/lsregister -kill -r -domain local -domain system -domain user
Press RETURN.
For Leopard users
Open the Terminal application in your Utilities folder. At the prompt paste in the following command in its entirety:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
Press RETURN.
And, if you haven't done so already I would suggest the precautionary:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Peer's RSA keys change after reboot - workaround

Looks like a couple of builds back - you messed up the peer key renegotiation/update when using the RSA keys authentication method. Every time a network member reboots, the key changes, and each of it's peers have to update their key manually. The workaround, for all others who are afflicted with this problem, is to change the Authentication method to Password, and then setup a shared password for all peers in the mesh. This is less than desirable, of course, I'm hoping Hamachi fixes this soon ...

Hi,
Actually the problem is fixed in yesterday's 2.2.0.385 release.
The build is available from the website.
You will need to accept keys one more time after updating, but they will not be lost after a restart anymore.
Regards,

Ipad2 battery reading changes after reboot

Similar Messages

Maybe you are looking for