Ipad2 battery will not work, once powered on it says 100% charged. but if i unplug it, it stops showing images.

Battery seems dead. only powers on when charged, but goes off when i unplug it's power cord. And if it was on, i could only use it for about 5 minutes, then it flickers off.
     i've tried updating it to ios 7.0, but when it starts to prepare for update it shuts off due to the 5 minute time. I tried that on the device itself, tried with a mac, but it only powers on when charged.
     Strange thing, when i go in to recover mode it stays on like.. forever! And if i charge it with a iphone 1A charger it will not pass the apple logo on start up; but if i use the ipad 2A charger it stays on for 5 minutes!!
     Please help me, i had this issue foe weeks!
     just to tell you people how my ipad got this issue: my sister was playing it at the sofa for an hour or so. then i went and picked it up and tried to power it up, but it just stays black. i charged it, and as i said above, my ipad only works for 5 minutes!
     So thanks to whatever who helped me solve this problem!!!!!

You followed this exactly?
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Similar Messages

I upgraded to Mountain Lion yesterday, but since doing so I find that my 1Password app will not work. I have checked for 1Password updates but there are none. Is there a compatibility issue

I upgraded to Mountain Lion yesterday, but since doing so I find that my 1Password app will not work. I have checked for 1Password updates but there are none. Is there a compatibility issue

Hmmm...I'm using 1Password Version 3.8.20 (build 31499) with a fresh install (scrape and pave) of Mt. Lion on my iMac and it's working fine.
I use Dropbox to sync 1Password so for my fresh install I simply downloaded 1Password from Agilbits website and installed it.
Have you tried reinstalling 1Password? Depending on how you purchased it, download it from their website or from the Mac App store to reinstall/replace it. (IIRC v3.8.x comes directly from Agilbits and v3.9 from the Mac App store.) You shouldn't have to uninstall it, the new download should overwrite the existing copy.
As with anything else, be sure to run a backup first!
More here:
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/17861-finding-existing-data-file-when-reinstalling-1password
http://support.agilebits.com/discussions/1password-in-mac-app-store/3377-how-to- reinstall
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/13769-reinstall
http://support.agilebits.com/discussions/1password-in-mac-app-store/2394-reinsta lling-1-password
Hope that helps.
D'oh! Mende1 beat me to it!

HT4367 I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

My iPhoto will not work with Yosemite, and it says that it was purchased under a different account, but that's not the case. Any ideas why I cannot update iPhoto?

my iPhoto will not work with Yosemite, and it says that it was purchased under a different account, but that's not the case. Any ideas why I cannot update iPhoto?

How did you buy iPhoto? Did it come preinstalled on your computer with Lion or later, or did it come with Snowleopard on system installer disks?
Which version of iPhoto?
If you have a version of iPhoto '11 and it is showing on the Purchased tab of the App Store, with your Apple ID, then delete iPhoto from the Applications folder (don't empty the Trash) and download iPhoto again from the Purchased tab.
If that does not work, contact The App Store Support from the Quick Links on the AppStore main page.
Only apple Support can fix problems with apple ID.

HELP NEEDED!! Recently upgraded my ipad air to the new update, charged it over night, now it will not come on? i plug in the charger but comes up the normal charging sign but still no life in it?

HELP NEEDED!! Recently upgraded my ipad air to the new update, charged it over night, now it will not come on? i plug in the charger but comes up the normal charging sign but still no life in it? Seems as though theres either a problem it charging or starting up. Had the ipad for about a year and a month or 2.. what can i do to source the problem?

Its just started up with the apple sign, then it goes to an off black coloured screen so its on but nothing showing just a dark screen but not jet black.. ahhh help!! thank you in advance

My Next G Bigpond internet device will not work once I installed firefox. How do I change this without being connected to the internet?

Hi. I installed Firefox yesterday as part of a work requirement. Since then, my Next G internet device will not work. How do I change the settings on Firefox without being connected to the internet? I have had to uninstall Firefox so I can use the internet.
Please help as I need both simultaneously. Thank you.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

I have an ipad 1 16gb, wifi and the wifi will not work. Under settings, it says "no wifi". Has anyone else had this problem?

I have an ipad1 and the wifi will not work. It is a wifi only model which makes it more interesting. When I go into settings, it says "no wifi". Does anyone have a solution to my problem? It is much appreciated.

If you are positive there is a good Wi-Fi signal in the area of the iPad I would first reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
If that doesn't work, I would turn off your iPad and then restart your Wi-Fi router. Unplug the router for 30 seconds then plug it back in. Once the router had completed its restart process and established a link to the Internet then turn your iPad on. Make sure Settings > Wi-Fi> On.

Battery will not work at all

The battery on my Powerbook will not charge, even if the computer is off. It says (Calculating...) in the battery status window, even though the charge never goes up from 0%. I need help to solve this problem.

How do you check the cycles on the battery?
Download a Panther-based battery utility off of http://www.versiontracker.com
Also, it doesn't say calculating anymore, it has a picture of
a battery with an X on it. What does that mean?
The battery with an X on your screen means there is no battery to charge. Do you know anyone with a working battery, or are near an Apple store, you could substitute, to see if in fact your battery is just plain dead, or whether there is another issue?
You're running off the power adapter, which suggests it's OK, so either the battery is bad, or there is a problem in the charging circuit on your logic board.

HT201317 My shared photo album will not work. I am trying to upload photos but I doesn't show up in my new device. I've done it before but now it's not working. My old device is a 4s iOS 7.1.1 and my new one is a 5 iOS 8.1.1. How can I make the pictures s

my photo stream does not work at all. I've tried making a new album, but that does not work. So I've tried using an already existing album and deleting the pictures there. I decided to only upload 1 photo from my old phone (iPhone 4s iOS 7.1.1) to see if it'll show up on my new device (iPhone 5 iOS 8.1.1) it doesnt even show up in my new phone (iPhone 6 iOS 8.1.2) this picture is what shows up on both my iPhone 6 and 5 but on the 4s there is a picture that I "uploaded" and a second one that came out of nowhere. I do not know what to do because in the past this has worked out for me and it shows up on all three devices

You can't restore to a backup that was taken on a device which has a higher version of iOS than on your iPad, you will have to update your iPad to 8.1.3 to be able to restore to it
You should be able to update your iPad via Settings > General > Software Update

Firefox will not connect to websites, it just says "connecting" constantly, but I can access the internet using IE.

For the last 2 days I have had a problem with Firefox. When I start it, one or two pages will open, sometimes 3 or 4, but then if I try to open any more tabs it will just get stuck connecting to it and never go to the page. Once it starts this infinite-connection process, the pages previously opened do not work anymore either. If you try to navigate in them, they will respond the same way. I have tried connecting in IE, and it works. I did upgrade to Firefox 6 yesterday, but I was having the problem before that (which is why I tried upgrading).

I have tried all of the options in that first link you showed and none worked. I also configured my firewall (Windows Firewall) and ensured firefox was in the "Allow" list, which it was. I still have the issue.
I did notice something interesting though. When I first checked the firewall, Mozilla firefox wasn't on the list at all. I had to manually add it and then made sure it was allowed to connect to the internet. Even after I uninstalled and reinstalled firefox, I never got one of those windows notifications asking me if I wanted to add a rule for firefox. Checking the firewall settings again, firefox was still absent. I don't think it matters, firefox doesn't work with no rules at all in the firewall, or if I manually add the rule and allow firefox to connect.
Any other thoughts?
Thanks in advance for your help

Presonus firebox will not work once i upgraded and they have no addl driver

my MACPro with firebox always worked with LEOPARD
steady blue light on
now i get a click every 3 seconds
once i upgraded to snow leopard
has this happened to any of you
in audi midi the presonus is not recognized
nor in SOUND in syst prefs
any help id appreciate very much
gl

First, update iTunes, then connect the phone to the computer and do a restore. This will also get your iOS up to date. Your phone should operate correctly after doing this, if not, you will most likely need to have the phone serviced or replaced.

The touch screen will not work properly and squares appear around the icons but I cannot remove them

H

You can not delete Apple supplied apps, such as Contacts, Reminders, Text, etc. You can only get the X to delete 3rd party apps downloaded from the App store.

Hyperlinks in presentation not working once published - Presenter 7.0.7

I have a link to an intranet address that will not work once the PowerPoint presentation has been published via Presenter 7.0.7. The cursor does not change to a pointer and nothing launches when the link is clicked. I have verified the Flash Player security settings as well as ensured no formatting of the text link except for the color change that happens when the link is inserted.
The issue (slide 37) can be viewed at: http://www.pivotpointelearning.com/docs/TTE7161/index.htm
Any ideas?
Ray

Hi Ray,
Thanks for sharing the presentation.
Textbox in which your hyperlink is placed have text containing Text effects. When you publish the presentation then any text with text effect is published as an image.
So, place text with a hyperlink in a separate textbox which don't have any text effects. Segregate the content having text effect and hyperlink in 2 separate textbox.
Thanks,
Shubhi

I upgraded to mountain lion. Now my virgin mobile broadband internet card will not work

I uninstalled the broadband software and then tried to reistall it but it will not work. I pluged in my usb card but it doesn't show that it is pluged in. I tried the card on my girlfriends computer and it works. I pluged a camera in my usb port and that works. Can anyone help me out.
Thanks

My internet card will only work on 32bit,and it sounds like mountain lion only works on 64bit so that must be my problem. I think I will have to upgrade my internet or go back to lion.

Since updating to ios 7 my camera on the back of phone will not work,

I updated to ios 7 yesterday and now the camera on the back of my 4s will not work, it freezes, i downloaded other camera apps but still no joy, the camera on the front of phone works fine but the rear is gubbed, can anyone help or is this a case of waiting for update to fix the bugs and if it is why oh why was this update released when faults were known

hello,
my 4s was in os6 and when os7 first released, i have updated it. during update from os6 to os7 after 98% my wifi got disconnected and then phone automatically restarted. since then my back camera is not working. front on is working perfectly. after that i reinstall os7 properly following step by step procedure but no positive result came out.
then i tried to change the camera with a new one but still with new camera the problem is same. then they used my camera in some other 4s and it is working fine. now i dont know what to do.
right now using os7.1.2
please advise.
Salman

Ipad2 battery will not work, once powered on it says 100% charged. but if i unplug it, it stops showing images.

Similar Messages

Maybe you are looking for