IPad2 HDMI sync problem

Anyone else getting a sync error when streaming HD movies using "Videos" over the HDMI connection to my Sony Bravia HD TV ?

I am replying to my own problem... Went to the Apple Store and worked with a Genius.  Determined that the AV Adapter was defective.  Swapped it out and now everything works as designed.

Similar Messages

  • HDMI connection problem with Olevia HDTV 237T

    I have a problem with the Fios HDTV box not communicating via the HDMI cable to my Olevia HDTV 237T. Every time I start up or change channels from HD signal to SD signal, the TV goes to blue screen with no signal. The only solution found so far is to unplug the HDMI cable from the TV and plug it in again. I tried an HDMI switcher box in-between but with no real difference in the result.  Is there a solution to be found before I wear out the connectors on the cable?

    The only other thing you could do would be to try upgrading the firmware on your television. That might fix the HDMI sync issues. If it doesnt, the only other option would be to use a component cable. It will give you the same 1080i quality picture that our set top box puts out. That HDMI sync problem is the biggest problem that any device that communicate HDMI can encounter. I'm sorry for the trouble you are experiencing.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Sync problems with ATV per HDMI and optical out

    Have some sync problems with ATV (actual), TV is connected via HDMI, sound goes over optical cable into DAC (Rega) and then to the amplifier, when using only TV-sound everything is fine, switching to the external speakers brings up a little delay, around 1/10 second. Any chance to fix this?
    Yogi

    Welcome to the Apple Community.
    I believe this delay is caused by the DAC, I don't think there is anything you can do about this.

  • HDMI Sound Sync Problem

    I've rented 5 movies and watched a couple of podcasts via Apple TV. In 5 of the 7 screenings, we've experienced problems with the sound failing to sync to the video. It's particularly bad with the Apple Keynotes. I have Apple TV connected via an HDMI cable to a Sony 1010 HD receiver, which is linked via HDMI to a Bravia 52" TV. I've tried direct hookup to the HDMI port on the TV and wound up with the same syncing problems. The receiver has a sync adjustment that I can use to get it close to sync but it's a pain and you have to stop watching the movie to **** around with it. Any suggestions?

    I had an audio sync issue over HDMI when I had Settings / Audio & Video / Dolby Digital Out set to 'On' (which I had to do to get my receiver to detect the Dolby Digital Optical signal). Turning this setting to 'Auto' or off fixed my sync issues when using the HDMI audio stream.

  • Audio sync problem - simultaneous HDMI and analog output

    I'm currently running my audio out through my Geforce 460 via HDMI to my A/V receiver. I have a simultaneous stereo analog output running through my ASUS Xonar D2, using Pulseaudio & Amarok as the player (VLC-gstreamer backend).
    I use the HDMI and A/V receiver to power my main stereo in my living room, but on occasion when I want music around the house, I use the analog line out to send audio to an FM transmitter.
    The problem is, I'm running into audio sync problems. The audio starts out synchronised (at least to the naked ear) but within 20-30 seconds it is noticeably out of sync, with the analog audio (form my FM radio) running around a half second ahead of the HDMI output (my main speakers).
    So - where to begin finding where the sync problem is? The receiver? Conversions between 44Khz and 48Khz?
    Any help much appreciated - google-foo hasn't turned up anything obvious so far.

    Yeah - that was my thought - a very difficult, and probably insoluble problem as it stands. I can't just mute one of the devices as that would defeat the purpose of having multi-room music! Fortunately it's not too noticeable usually, as you can't usually hear the main stereo and the FM radios at the same time, unless you're standing in the right part of the house
    The analog splitter cable not really a goer, since running clean, crisp multi-channel HDMI with pass through when needed is the essential goal of the HTPC. So unless I was to switch inputs and or unplug cables...
    What I will end out doing, in the absence of a software solution, is hooking the FM transmitter directly to my receiver. I was going to just use the headphone-out jack of the receiver to feed audio to the FM transmitter, but the stoopid receiver can't output audio to external speakers at the same time as the headphone is plugged. To overcome this, I'll probably run a headphone amp off the receiver's RCA outputs, into the FM transmitter. Like this one: http://headamp.com/portable_amps/ae2/, or this one: http://www.amazon.com/Rolls-HA43-Headph … B00102ZOQC
    Last edited by sultanoswing (2013-11-13 06:15:11)

  • IOS7.0.2 & Itunes 11.1.0.126 sync problems with iPad2

    iOS7.0.2 & Itunes 11.1.0.126 sync problems with iPad2 - Does step 1 & 2 of sync. Then this message> The iPad "my ipad name" could not be synced because this computer is no longer authorised for purchased items that are on this iPad. To authorise this computer for items from the iTunes Store choose Store> Authorise This Computer.
    Tried all that many times. Also went into my account and de-athorised all computers and re-authorised this one. No joy. What next. Fedup that things are going wrong with apple. We buy apple because it works I always say. Yeah right.

    Hello Laura,
    Thank you for providing the details of the issue you are experiencing when trying to sync your music to your iPhone.
    I recommend trying to resync.  You can resync content to the iPhone by unchecking "Sync Music" and then clicking "Apply" and then checking "Sync Music" and then clicking "Apply" again:
    I recommend reviewing the full article here:
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12113
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Sync problems with EPSON beamer

    I have problems to connect my new EPSON Beamer (EMP-TW700, HD-ready) via HDMI cable to the Apple TV (160GB). There seems to be a sync problem.
    The beamer works fine with my MacBook Pro via DVI-Port.
    What to do ?

    What exactly do you mean by sync problem.
    Do you mean syncing content or that the picture rolls or is too large/small or is the wrong colour.

  • Syncing problem over cloud for all my devices

    I have severe syncing problems over the cloud with all iWorks apps (Pages, Numbers, Keynote) across ALL my devices (iMac, MacBook, iPad2, IPhone4) and even on web: It JUST DOESN'T WORK!!!
    Internet works perfectly, Docs sync is set to ON in every device, but since 6 October 2012, syncing was stoped for unknonw reasons.
    I tried to find someone to contact for by email, but it was impossible. So I ended up here ...
    Can help someone?

    For each device, backup first, then on the device use Settings > General > Software Update. Each one still has to download the update individually, but they are smaller files so should download more reliably.
    tt2

  • HDMI Sync Turns on/off While iPad 3rd/4th Gen is Sleeping

    I am using some 3rd party hardware to monitor the sync output of an iPad's HDMI output using the 30-pin to HDMI adapter so when the iPad is asleep a TV shows one thing and when the iPad wakes up the TV will automatically switch to the iPad.
    The first issue I had was that while the iPad is plugged in, the HDMI output never turns off.  While it would be EXTREMELY nice if the HDMI output did turn off while the iPad is plugged in, I was able to work around this with a mechanical 110VAC timer that charges the iPad at night and removes power during the day.
    The problem I am now having is, while the iPad is asleep and not powered, the HDMI sync randomly turns on for a few seconds and then turns back off.  This provides some undesirable results because the TV will momentarily switch to a black screen and then back to the digital signage that it's supposed to show.
    I've tried turning off all updates and push notifications and it still is happening.  I've also tried my iPad 4th gen thinking that the Lightning connector might make a difference and it still does the same thing.  Any ideas would be greatly appreciated.
    Thank you!

    UPDATE:  It seems that turning the WiFi off fixes the problem.  Is there any chance an iOS update might include a feature to turn off the HDMI output when the iPad's screen turns off?

  • I have set up my new iPad 2 on my windowsn 7 computer, but experienced syncing problems from the start. It seems that it doesn't recognize the iPad, although it appears in iTunes.It only gives set up as new or restore options.

    I have set up my new iPad 2 on my computer (Windows 7), but experienced syncing problems from the start.  It seems that although my iPad is regognized in iTunes as it appears there, it only gives met the options to set up as a new iPad or restore from the backup, no synching options. What do I do?

    File>Devices>Transfer Purchases will transfer the itunes purchases to your ocmputer.
    You should sync your ipod to your computer regularly.

  • 'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

    I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8.  [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems: 
    First, after importing the file (.avi), I get a message about ‘dropped frames.’ 
    Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ]   I can use the shift-arrow key and see that the video is there.
    Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer.  There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux). 
    Questions:
    1.  Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
    2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

    "I think you're telling me you're using a backwards compatible Digital8  camcorder to capture your video as DV-AVIs. Is that right?" YES
    "Are you using  Premiere Elements to do this capturing?" YES, AS ABOVE PE8
    "Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
    WMP v12 is dumb. Under properties, media, it says 'video.'  However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
    So, back to the Questions:
    1.  Why doesn’t the source  monitor play the video? Is this a problem with PE8 (latest update as of 3  March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
    2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

  • Owning 2 iphones with one Apple account has = Sync Problems.

    Owning 2 iphones with one Apple account has = Sync Problems.  iTunes is thinking my old iphone 4 is the same phone as my iphone 5C.  When I plugged in my iphone 5C it auto synced my 5C to iTunes and it wiped my 5C and restored it to the same content as is on my iPhone 4.  This is a big problem since my 5 year old has been using the iPhone 4.  It's all Mickey Mouse and Backyardigans.  (Total photo/app/contacts loss)
    I was able to update the 5C and restore from a 3 month old backup that is actually the content from the 5C but now when I plug in my 5C it wants to "setup as new phone" or "restore from backup"  What's going on?  I'm afraid to choose either option.
    How can I get iTunes to see these devices as 2 and not one?
    Can I use my Apple ID on both phones still or is this the problem?

    They were both displaying the same name in iTunes.  I changed the name of the iPhone 4 before the 5C was plugged in but it still went ahead with syncing it to the 4's data.

  • Outlook 2003 + iPhone calendar sync problem solved

    Here is how I solved my sync problem. Seems a lot of people have the same problem here with Outlook sync suddenly not working after it worked fine for a long time.
    I've had Outlook 2003 calendar sync with my iPhone for a few month without any problem, but a few days ago the sync suddenly stopped without any error message. iTunes Diagnostic found no problem and I followed all the steps that Apple outlines to fix the problem but nothing worked (TS2776).
    As Apple asked to, I created a new user account on my Windows machine and setup a few test calendar entries to sync with my iPhone. That all worked fine.
    So I did what Apple doesn't tell you, and I copied my original Outlook Data file (.PST) over to my new user account and tried to sync that one. Now this didn't work. So I knew the problem lies somewhere in my PST file.
    I have then tried to create a new one from scratch in my original Windows account, and copy all the data over. Again, it didn't work. So I emptied the file again, and copied all my calendar entries over to the new PST file in batches (first 10, then another 10, etc).
    What I found at the end is that one single calendar entry I created a few days ago caused my sync to stop working. Once I removed this entry, everything worked fine again. Don't ask me what was wrong with it (I made a backup just in case Apple wants to see it), but now everything works again.
    If you want to save some time to find which one it is, you may start deleting entries that you created just recently before it stopped working.
    Hope that helps.

    Hi im having the same problem. I use outlook 2003 on windows xp and until recently my sync (using usb) was working fine. Now it would seem that calendar items are no longer syncing. can you give any further details of the calendar entry which was causing your problem? im wondering if it was added on a certain date perhaps.
    I am running the inbox repair tool to see if my pst file has any problems but would appreciate any other help in the mean time.
    Cheers

  • How can I sync my IPOD Nano 4 to iTunes on my PC? I've already tried the sync button on iTunes and it says it is synced. I've also tried the 5 steps recommended by Apple to fix sync problems with no luck.

    How can I sync my ipod nano 4 to iTunes on my PC? I've tried the sync botton on iTunes and the 5 steps recommended by Apple to correct sync problems with no luck.

    How is your iPod configured to sync content from your iTunes library? Any error messages during the sync process? 
    You may want to reset warnings on the device by right->clicking on it under Devices and choosing Reset Warnings.  Then resync the iPod to see if any alerts appear.
    Is this the same computer you normally sync the Nano with?
    B-rock

  • How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

Maybe you are looking for