Ipad2-ipod4 cable options for audio/video out

Trying to find the best option for playing music/video from iPad2/ipod touch G4 through my home theater receiver.can I use one cable for both? Receiver does have HDMI inputs/output to tv, but will sound play through to tv or just on surround. Also do any options play audio in 7.1 sound, or at least 5.1?

Sorry you were having issues w/ audio sync. Try bypassing Onkyo system and going directly to TV w/ component cables. Sync issue could be a result of HDMI firmware hand shake problem. Then from TV you can use the optical out to Onkyo system.
Jerrold_Vz
Jerrold_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Similar Messages

Video Playback Option in "Preferences/Audio-Video Out"

The following did not make it into the User Guide, though it did get into the troubleshooting docs:
http://www.adobe.com/support/techdocs/332121.html
332121 Video Playback option in Audio/Video Out preferences (Encore DVD)
A new option was added to the Preferences menu of version 2.0 of Adobe Encore DVD. When you select Edit > Preferences > Audio/Video Out, you see an Automatic option in the Video Playback section. This option is selected by default, allowing Encore DVD 2.0 to play video in a Standard Direct3D mode. If the feature is not selected, then video playback will be in GDI mode.
The only reason to deselect this option is in the case of poor preview playback or black video. In order for the change in preference to take effect, you must close the Monitor panel and then reopen it.
Background information
Encore DVD 2.0 (unlike previous versions of Encore DVD) uses the Premiere Pro playback engine for video playback. Premiere Pro has three Desktop Display modes: Compatible, Standard, and Accelerated GPU Effects. In Compatible mode, video is played using the GDI. In Standard mode, video is played using Direct 3D. In Accelerated mode, video is played using Direct 3D with GPU.
The default setting for Encore DVD 2.0 is comparable to Premiere Pro's Standard mode (Direct 3D). When the Automatic option is deselected, it is comparable to Premiere Pro's Compatible mode (GDI).
If Adobe Premiere Pro 2.0 detects a Direct 3D error when previewing in Standard mode, it switches to Compatible mode. Encore DVD 2.0 does not have this capability, nor does it provide the same option in the User Interface for the user to switch between the three display modes. This is why the Automatic option was included in the Audio/Video Out preferences.

Welcome to iMovie Discussions.
Sounds like you've been shooting at p ("progressive") frame rate (..24p or similar).
iMovie can't handle that (..except for JVC's 720p footage..) and it thinks that each frame is a "field" (..half a frame). It therefore plays those frames at double speed, thinking that there should be two 'fields' to a single frame.
Did you shoot at a "p" frame-rate..? If so, you'll need to convert the material, with some other program, so that iMovie can handle it.
I can't remember offhand what software might do this, but if you were shooting in HDV hi-def (which is recorded in the camera using the MPEG-2 video system) you may be able to use MPEG Streamclip (click on that blue link) to "unscramble" your material.

PE3 - Audio & Video out of synch on imported VOB files

I have tried adding some footage imported from DVD & is saved in a folder on the PC (by the PE process).
The file is stored as VOB 1 & VOB 2. When I import this file into the PE project the first half plays OK. When it plays onto the second file, the audio is lagging behind the video by a considerable amount.
If I view the file separately (where it is stored) with Windows Media Player, it plays back fine.
When I view the file in PE in the preview window, the out of synch fault occurs.
Something is happening in the import process to the PE project.
Anyone, have any ideas on the problem?

Here is a reply that I posted to a past thread that will give you options for fixing the Out-of-Sync issues when trying to use VOB files within PE.
In all cases it is better to not import VOB directly to PE, but convert to DV-AVI via one of these methods and then use the AVI format.
The last bullet below sends you to a Muvipix link describing how to combine multiple VOB's from one disc to a single file, this will cure the Sync problem, then convert this file to DV-AVI for import to PE:
I take the min-DVD directly from camcorder to my PC, and capture the disk via Power Director.
PD will convert the VOB's directly to DV-AVI Type 2 on one pass.
I then load this DV-AVI into PE7.
(PD v7 was pre-installed on my new PC from HP, or it can be purchased from Cyberlink).
Other options to try:
Copy the VOB's directly from the mini-DVD to your PC and use Prism to convert these to AVI.
Prism is a free convert utility and can be found here:
http://forums.adobe.com/thread/415317?tstart=0
Or load the VOB or Mpeg into PE, then use that to convert to AVI.
(Export to DV-AVI with PE8 is done with SHARE/PC, not Export under the File Menu, which is greyed out).
I've had many issues trying to work with Mpeg's and VOB's when loaded directly to PE with limited success.
So if you can get it converted successfully to AVI outside of PE, I've found this to be a better approach.
Post results, if any of this works for you...
Note: One other thing, if you are working directly with VOB's to PE, especially multiple VOB's from a single DVD, you can encounter out-of-sync issues between video and audio. If this occurs, review this link from Muvipix:
http://muvipix.com/phpBB3/viewtopic.php?f=38&t=2469:

Microphone options for sports video

I need to figure out the best options for audio capture for high school sports videos--primarily football (American) and volleyball. For football, I will be recording from the annoucers booth (i.e., well away from the field). I'd like to get one channel that is mostly "field" sounds (and doesn't include my behind the screen cursing), and a second channel that has more ambient sounds and that will hear me calling out down and distance (and cussing) Would a shotgun mic be useful at distances of 100s of feet?
I have a Canon XH-A1 which has dual XLR inputs. Cost is a strong consideration. Appreciate your advice.

+<??? Thought I posted this days ago...>+
Ah. Yes. With potentially hundreds of clips (plays) per game, that would be a lot of clapper boarding! But I get the idea and I'm considering it. Maybe there's a way to get the LANC signal to trigger a DAT tape...
Right now, I'll be operating the two sideline cameras and we will have a third camera on a 30' tall boom in the endzone (yes, this is just high school...)
For the next day film review, the editing has to be minimal because of the time crunch, so i'm trying to work out synchronizing the cameras. There's also special football video review software that gives the coaches and players a lot of viewing flexibility from the multiple angles.
For my own use (son on the team) and for the end of year highlights stuff, I have been using Final Cut Express, which I like. Pro/Studio has a lot more features, and the fact that express loses the timecode, can only handle a few HD formats, and only works in AIC are significant limitations. $1100 and the huge time committment to get up to speed on Pro are pretty big limiatations, too.
Everyone is blown away by the video though--even transfered to DVD using iDVD. When they see it directly off the camera or on the computer, well, it certainly ain't the $600 Costco special video camera folks are used to. I'm very much a novice with using the camera, and I can't say I have a lot to compare it to, but the image is spectacular, which I assume has as much to do with the lens, it has full auto dumb-dumb modes that work reasonbly well and full control modes that give you... full control... it's reasonbly small and light. There are a lot of menu steps to get to certain functions, but there are user defined function buttons that you can set up. For me, so far, so good.

Audio/video out of sync (audio delay) with PowerBeats wireless earphones.

I am having a problem with audio/video sync between my PowerBeats Wireless earphones with my MacPro and MacBookPro. I have tried pairing, playing the video, pausing the video, turning off the PowerBeats, tuning the PowerBeats on, then starting the video playback again. I have the same audio delay so this not working for me. Anyone have an update as to how to fix this audio/video sync problem?

I am playing MPEG-4 movie files. I did open MPlayerX from my dock, then pulled down File to select Open which then did show the folder where these movie files are stored. Then I was able to select a movie file, open it, and use "Decrease Audio Delay" to closely sync the audio with the video. I say closely because it is not perfect. Rather than stepping each increase or decrease in one tenth of a second, perhaps a finer adjustment would have been in milliseconds. This is the adjustment that I have with my AVR to sync the audio with the video, so I know this is a possible increment adjustment. The perfect adjustment was in between -0.4 and -0.5 second,however, this was not possible in one tenth second adjustments. The closest adjustment was with -0.4 second rather than with -0.5 second. So, adjustments in milliseconds could have been very near a perfect sync. Perhaps later versions of MPlayer will offer the adjustment selection in milliseconds. Nevertheless, this is working much, much better than before. Thank you so much. I have spent most of this day researching this problem and you have come up with by far the best solution. This problem goes all the way back to 2010 and possibly beyond for Apple products. There are hundreds of reports documenting out of sync audio/video issues with no solution that works as well as MPlayerX. Even the Beats support staff have no idea of how to resolve the audio/video out of sync.

Buffering pauses and audio/video out of sync, single RTMP stream w/ simple embed

Hello,
I am running Flash Media Server on my dedicated CentOS host, and finally connected a single RTMP stream fine and am able to embed and play back the stream, but I am getting constant buffering pauses (approx every 5 secs) and audio/video out of sync by at least 5 seconds. My CPU with Flash Live Encoder is a powerhorse, never over 25% processor or ram usage while streaming, and my upload internet speed is averaging 6-8 mbps which should be more than adequate. I fear the issue is server side, however port 1935 is open and in use, not firewalled on CPU nor the host.
Any suggestions would be great.

Hello,
Thanks for the reply, I am using embed code generated with Flash Media Playback, as follows:
<object width="640" height="480"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F%2Fsq uarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=false" ></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480" flashvars="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F% 2Fsquarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=fa lse"></embed></object>

Audio/video out of sync on project, raw okay

Okay, I have a project where the Audio and video get out of sync in cs5, but the original file is just fine.
So, my file is an mpeg 1440/1080 4 hour 40 minute, 53Meg file. When I preview it in a viewer like media player, it plays perfect, no video/audio
sync issues.
But, with this file in a Pro CS5 project, the video/audio lose sync. I have found this has messed up a lot of my final products which I had not seen.
So, any ideas?

Have you installed the recent updates?
There was a bug fix in a recent update for audio/video synchronization issues. The bug was in the indexing and conforming phase, so you would need to clear the media cache and re-index the assets for the fix to take effect.

IMovie Problems: Photo import and audio-video out of sync.

Photo import problem:
Some times, I have problems importing photos onto my new project, the photos will appear to be that just one same photo when played. It does not transit to the other photos following the first, it's just stuck on the first. Is this just an issue with iMovie '11? Are there any other ways to resolve this problem?
Audio-video out of sync:
I've checked some other discussions but I'd like to raise this issue again for APPLE. There are problems exporting my 7-minute film - the video and audio go completely out of sync no matter what format I export it to. There are not a lot of clips used. I'm now trying the method to detach the audio files from the video, hopefully it works.
These issues are bothering me, in addition to a failed firmware update on Mac OSX 10.7.2 a few weeks ago. I couldn't open my computer and I had to go to the Genius Bar to have them help me backup my files on my computer and reinstall the whole system again. Anyways, any help to the above iMovie issues are greatly appreciated. Just wish that Apple will address these current issues and not just focus on improving their products with awesome features ._.

Hello,
Thanks for the reply, I am using embed code generated with Flash Media Playback, as follows:
<object width="640" height="480"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F%2Fsq uarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=false" ></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480" flashvars="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F% 2Fsquarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=fa lse"></embed></object>

How can I connect my '07 MBP to an HDTV via HDMI for audio/video?

How can I connect my '07 MBP to an HDTV via HDMI for audio/video?

About Mini DisplayPort to HDMI adapters
Stefan

Full screen preview blanked out in from options in audio video settings?

Hi all,
Am running FCP6 and have lost the option to preview fullscreen in the audio video settings menu. It is literally missing, as an option, though the space the option inhabited is still there. Only options I have are to preview via firewire to my CRT monitor. I have tried to refresh AV devices and all frames, but doesn't seems to help/work.
Any suggestions?
Many thanks,
-Tom

Hi David and thanks for your suggestion. I gave it a try and no luck. Its just the same. I have no options in video playback at all unless I connect my deck and then I have only the via firewire options, the deck provides. BTW, I know its the wrong forum, but I have the same blanking out situation in the output filed in MOTION.
Any more suggestions would be greatly appreciated.
Thanks,
-Tom

Apple Video Component Cable only for audio

I want to buy an Apple Video Component Cable to use it with an iPhone 3GS and also with an iPod 5G.
The cable will be connected to the TV and to the audio receiver.
I know that this cable is not compatible with the iPod 5G, but in this case I only want to use it to listen to music. Therefore, only audio with iPod 5G, audio/video with iPhone 3GS.
Does anyone know if using this cable, despite the fact that video won't work on iPod 5G, audio will work fine on iPod 5G?
I'd like to know that before I buy it.
Thanks!
Andrés

I'll answer my self.
Yes, it does play music on the iPod 5th gen.

Solution to Audio-Video out-of-sync

For a good 3 full weeks by using videora to convert files, i've realised that it has been giving me such non-synching rate between the audio and its video (try scrolling to the later part of the movie, viewing from the ipod)
Trying to solve the problems, from my research of frame rates in wikipedia to reconverting thouroughly again but to no avail until i realised this simple method reason why.
I have been using Videora with using its "input" frame rate - do not use that - it is not reliable - i am presuming that it uses a same number of frame rates for all data conversion which is why the difference in audio-video differences. Solution is simple.
1. Just right click on any .avi files
2. Check their frame rate.
3. Input the exact number for your videora presets. (do save a number of presets eg. 23 fps (frames per second),
25 fps and 29 fps - you'll find them useful when you see their respective frame rates to match your respective profiles.
Since then, i have no problems with the out-of-sync syndrome from videora, enjoy.
Other problems like videora doesn't convert .mov files,
you'll just have to download the latest itunes and use its "convert selection" option in there.

I have made slight progress in my problem, but still have not fixed it. I have imported my footage through IMovie and everything is IN sync, if i move that same footage to final cut pro, everything is still in sync. However, capturing on final cut pro yields different results because everything captured on FCP is out of sync. So i know that my problem is a setting with the capture process having to do with final cut pro, Please help because i have so much work to do!

Netflix Audio/Video Out of Sync

My new AppleTV arrived today (yay!) and I quickly set-up and configured it. While generally impressed I'm observing that the audio and video for Netflix streaming are not synching up properly. I've got the ATV hardwired to my network and am not connecting via wireless.
I have both the HDMI and optical cables plugged in I've tried audio over both interfaces and with the ATV setting for "Digital Out" set to on and off and all variations have the same synch issue.
I've tested the same show with the Netflix app on my iPhone (over wifi) and using the OSX Silverlight player (hardwired) which both synch the audio/video properly.
Anyone else experiencing this? Did you find a solution?

I haven't seen any audio sync issues but I would like to drop a suggestion for those affected by this. I believe most televisions now now have a setting to compensate for this. (Well at least I know my Vizio 37" does.) My television has a setting (unique for each input) called lip sync and it's for correcting exactly this issue. Initially it's a feature for correcting out of sync problems between the television and satellite receivers which is actually a common problem. Most modern televisions should have a similar feature for fixing audio sync features. Doesn't hurt to dive into your televisions settings to see if you can correct your audio sync issue.

Iphone for VGA Video Out not working

We have the Iphone/iPad VGA to Monitor connector. We tested it with 3 different iPhone 4 phones... It worked on 2 of them, but the 3rd woudn't work. What possible reason would it not work? The 3 phones had software of 4.3 and higher...

Dr. L,
The previous iPod's did not support component video out for newer televisions that support it. The box for the older Video out cables do not say they support the iPhone.
The current video out cables are available in either component or composite video out. They also say they support the iPhone on the box.
In addition when shopping the Apple Store online for iPod or iPhone accessories there is a compatibility guide which shows icons of the iPod models or iPhone that are supported.
Overall my personal experience is that this, and other Apple specific ones, are much smaller compatibility, and downtime driver for IT than many of them I have run across supporting a variety of computer and networking platforms over the last 23 years.
Hope this helps,
Nathan C.

Audio video out of sync?

Every movie I have rented and purchased the audio is out of sync with the video. If I pause the movie sometimes it goes back into sync but doesn't last long before it goes out of sync again. I have been trying to resolve this issue for the past week. I have turned off everything on the computer that manages audio, made sure all drivers and software is up to date. I have uninstalled itunes and reinstalled. I've set itunes and windows bit rate the exact same and nothing seems to fix the problem. I am running Windows 8 on a new Samsung laptop, previously I was using a Gateway laptop with no problems. From my reasearch the past couple days i see this has been on on going problem with itunes users and I hope someone has a fix. I just rented a movie from Xbox Video and it worked perfectly. I think I am going to have to make the switch to Xbox but I have movies I have downloaded to itunes and would like to watch them.
Any help would be appreicated.

Hello bjwilson22,
I was researching the symptom you describe and reocmmend this article named Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues found here http://support.apple.com/kb/ts1718
It is pretty length, but also thorough and I feel has the best advice to help troubleshoot the issue.
All the very best,
Sterling

Ipad2-ipod4 cable options for audio/video out

Similar Messages

Maybe you are looking for