Ipad2 is sluggish after iOS 8 upgrade

Since downloading ios8 my iPad2 has become very sluggish, cell service drops out and only a hard reboot will restore, some of my apps icons only show up as an icon framework, exchange based email seems to be getting erased and has to reload ( same on iPhone 5).  When the next patch coming out please, can't happen soon enough.  My iPad2 is almost unusable.

This is just a user to user forum. We don't know when or if there will be an update (although an eventual update is pretty much inevitable)
You can try a few things.
Reset your iPad
Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost.
Force close any extra apps.
Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
You can also look into restoring your iPad. Do a backup, restore it to factory defaults then restore your iPad from that backup. Might help.
Beyond that you can send Apple feedback and let them know there are issues.
http://www.apple.com/feedback/

Similar Messages

  • Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

    BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

    All resolved at last
    Deleted the SMTP setting
    Recreated the SMTP using the same settings
    Able to send emails now
    No logic - as usual - just a bug!

  • I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
    According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
    DRM audio is not effected as this is handled by the native iOS music app.
    As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
    I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • 3G icon in the status bar got disappear after ios upgrade 8.1

    3G icon in the status bar got disappear after ios upgrade 8.1

    Nginear48 wrote:
    Thanks for your quick response. I've tried everything you suggested and get only temporary fixes. Sometimes for a day or two, sometimes only until I use Safari for the first time. It's annoying and probably effects battery life between charges.
    You would think that it must have some effect on the battery, but oddly enough, the update to iOS 8 actually helped my battery life, in spite of all of these hinky little issues that are taking place. In my experience, the activity icon is not affecting the battery in a negative way.
    Another issue with IOS 8.1 that you may have seen is the loss of icon pictures on home pages. Again it seems to be Safari related, since app icons found in the App Store are not affected, only web based icons you personally put on home pages. I get what I call a test screen similar to what you used to get on old tv sets on every one of my personal icons.
    I know exactly what you mean. I got that as well. On a few of them, when I opened the websites using the generic test screen icons and then closed them, they changed back to the way that they should look. For the ones that did not change, I recreated the home screen shortcuts and deleted the generic looking ones - the test screen icons.
    And don't get me started on iBooks.
    For the very limited use that I make of the iBooks app, i haven't noticed any problems, but I rarely use the app. I don't read books on the iPad other than a few user guides and if they are pdf guides, they reside in more reliable and feature rich pdf apps on my iOS device.
    I wish that I had the fix for the spinning activity icon, but everything that I try, is temporary at best. IMO, this is the buggiest iOS update that I have seen, and I have been using iOS devices since iOS 3 on my first iPad. I realize that there are plenty of people that are not experiencing issues, but I have seen a number of weird things that I wish I could fix. None of my problems are major, but they are annoying.

  • No valid license found after IOS upgrade on C3750x switch

    HI,
    Two switches below are working fine as a stack with IOS c3750e-universalk9-mz.122-55.SE5.bin & ipbase license.
    Switch#1 (Master, WS-C3750X-24P-S)
    Switch#2 (Member, WS-C3750X-24P-S)
    After IOS Upgrade to c3750e-universalk9-mz.150-2.SE7.bin, The stack was broken. Switch#2 didn’t recognise valid ipbase license with new IOS and came up with lanbase license instead. Therefore stack cannot be composed due to license mismatch between Switch#1 (ipbase) and switch#2(lanbase).
    I’m wondering why Switch#2 didn’t recognise ipbase license with new IOS even though IPASE is running well with previous IOS.
    Here is excerpt from “show version” with 15.x image on Switch#2.
    License Level: lanbase
    License Type: Default. No valid license found.
    Next reload license Level: lanbase
    Here is excerpt from “show version” with 12.x image on Switch Stack.
    License Level: ipbase
    License Type: Permanent
    Next reload license Level: ipbase
    Thanks
    Jeong

    Thanks guys,
    I have fixed the issue by configuring  'license boot level ipbase' on the member switch#2. The switch recognised IPBASE license well and joined the stack successfully.

  • After ios upgrade to 7.0.4 i got power botton and no sim problem need help      help

    after ios upgrade to 7.0.4 i got power botton and no sim problem anyone having this problem?

    Installing an iOS update does not add a physical button.
    As for the "No SIM" message, try removing and reinserting the SIM or replacing the SIM.

  • IPAD2 very slow after IOS 8 upgrade

    After IOS 8 upgrade many aplications ( Safari, Facebook, etc) load  very, very slow (comparing with 7 version) , with a significant delay of more than 10 seconds...
    Who can I solve this problem? Any workaround?
    PD
    Apple should better test the software before delivering.
    Thanks.

    Here's the list of the most annoying issues that affect me since updating my iPad 2 64GB w/Cellular iPad to IOS 8:
    EXTREMELY SLOW - When opening apps, or switching between them - We are talking just the built-in apps. Mail, Safari, Settings....
    Extremely slow Wi-Fi AND broadband. The Wi-Fi is the worst though. Horrible. Page load times are 2 to 4x slower than my wife's iPad.
    Battery life reduced by at least 25%. Used to make it all day long, now I am having to plug it in.
    Heat - It is working so hard that the processor is heating up. That can't be healthy for it, and surely the majority of the power issues stem from this.
    Copy/Paste not functioning correctly between browser windows. Oh this is frustrating. I just want to paste the URL of one website I am on to Facebook, for instance. Even though I COPY, it's pasting in info I clipped a earlier in the day to one browser tab, but if I open another one, it will paste the correct information. You never know what you are going to get.
    Cannot post a photo to facebook by hitting the camera icon when leaving a reply or making a post (using web browser version)... It starts the upload, then just stops. I *CAN* go to photos, then SHARE it to facebook, but that doesn't allow me to post a photo along with a reply.
    Multiple app crashes per day. This I can deal with. It's nothing new, it's just more frequent. Safari and Mail seem to be the major culprits. It wouldn't be so bad except it takes 2-4 seconds to reopen the crashed app. Sometimes as much as 10 seconds.
    And that's just the annoying ones....

  • IPad 2 Does not retain names and passwords after iOS-upgrade  to 8.0.2

    After the last series of iOS upgrades (device current status is 8.0.2 , latest available) the iPad2-16G WIFI version, does not retain any names and passwords anymore. Function (Safari) is enabled.
    Re-booting, clearing memory etc did not solve anything).
    Is this a known version 8.0 bug or .......?

    Make sure "Private Browsing" is disabled.

  • 0 DSP resource allocation failure after IOS upgrade

                       Hi all 
    i can't make and call after upgrade IOS to Version 15.3(3)M2
                               *DSP VOICE CHANNELS*
    CURR STATE : (busy)inuse (b-out)busy out (bpend)busyout pending
    LEGEND     : (bad)bad    (shut)shutdown  (dpend)download pending
    my router is Cisco 2901

    I think there are more people... So I suggest to iPad2+3G user not to upgrade more than iOS5 :)
    and more I am trying to solve the problem for a couple hours...unfortunetly, there is nothing solved yet.
    I have restored from iTunes, with and without SIM... Just 1 second I see the my carrier than lost again
    By the way to be sure about it, I have checked my and friend's SIM with iPhone 4 which is updated with
    iOS 5.0.1 and all the SIM worked perfectly on phone...
    I think we are not alone but we are the only having problem as iPad2 user...since there is no feedback
    From others...

  • IPad2 charging issues after iOS7 upgrade

    I recently upgraded iOS7 in my iPad 2, after the upgrade I find that the charging time has increased greatly!  Not sure if this was due to using the iPad while charging. Yesterday left iPad2 for charging all through the night and more (12-14 hrs) only to find this has charged only 3%. The charging issues seems to have degraded over time. I had atleast charged fully (100%) once after iOS7 upgrade-which also took a lot time than iOS6.
    All the charging I did was over wall Unit, with original chargers. I see from forums that this seems to be experienced by few more users. Anyone found any solution to this problem?
    I have tried resetting, switching off the iPad 2 while charging with no success. I'm now regretting having upgraded to iOS7- which I liked. This is not what I expected from Apple.

    I also have a Mac Air 2012, tried charging from Mac Air and it's now charging! Mac Air is now charging from the same wall unit location which I used for iPad 2 - so nothing wrong with the wall unit. 
    I just wish i could charge as fast from wall unit as with iOS 6.  Any further guidance is greatly appreciated.

  • Can't sync iPad after iOS upgrade to7.0.2 - repeated authorisation prompt - using admin profile, file SC info does not exist

    Hello,
    After I upgraded to iOS 7.0.2 I can't sync iPad mini with PC (on Windows XP). I keep getting the folowing message: "The iPad could not be synced because this computer is no longer authorized for purchase items on this iPad". I tried everything:
    1) De-authorizing and rebooting (about 100 times);
    2) De-installing and reinstalling itunes;
    3) Deactivating the firewall;
    4) Run Diagnostics (result - all works fine including sync);
    5) Tried to look for the "SC info" directory or file everyone is referring to in the Computer (Hidden files) of the iTunes directory - nothing;
    6) Ticking and unticking the |Sync over Wi-Fi" option;
    7) Changing backup from iCloud to this Computer and back.
    I am using the admin account on my PC - doesn't help.
    I cannot sync anything at all.
    BTW - on the PC and on the iPad - everything that is there plays OK. I can get stuff from iStore both from iPad and from the PC - but I can't sync the two.
    It looks like an iOS 7 bug to me - any ideas or advice?
    Thanks.
    D.

    No I have tried multiple connections, at home, at work, and even at my church but to no avail.  For example I have recently purchased a CD from Itunes using my computer, but my ipad will only play it from the cloud.  I've tried to download straight from my Ipad and that too does not work.  When ever I try to plug the Ipad into the computer a window pops up and says that the sync has failed.  If I try to drag the file to the Ipad it will say it's loading than just quit before it transfers.  hmmm.  I hope they get this bug fixed some.  would really like to have that CD to isten to on the go.   Another issue I am no having is the apps are having trouble updating.  I have tried to turn off auto update and do it manually and that too is failing.

  • POE 3560 Issue after IOS upgrade

    Hello,
    I having issue where 6 WLAN AP's not coming back uo after reboot and IOS upgrade of 3560 POE swtiches - . Prior to changes here most if not all ALL the 23 Aps were mainly on one switch, Now after these changes they are now spread over three switches ( 3560's) - with 17 coming back on line
    I am sure its not the power limitation of the switch(s) as the one switch I am TS at present had a fairly large allocation of the aps attached prior to ios upgrade and reload. and the available power value now showing is applicable.for 8 AP's
    I have tried various TS steps to try and bring them back up - A couple of things I would like to try but I am restricted to do so is to check the APS physically or downgrade the ios!
    Any input on this matter would be truly appreciated.- (attached is the log buffer debug)
    res
    Paul

    c3560-ipbase-mz.122-25.SEE2.bin
    You upgraded the IOS to the switch?  I shudder at the thought of what old version did you upgrade FROM.  
    Available:370.0(w) Used:110.4(w) Remaining:259.6(w)
    You've got more than enough PoE left. 
    Only two things comes to my mind:  
    1.   Cable issue - Unfortunately, the 3560 is a non-GigabitEthernet and this particular sub-model does NOT support TDR.
    2.  Hardware failure - Read THIS.

  • AP350 won't boot after IOS upgrade

    I have an AP350 and after I upgraded the IOS to 12.2.15-JA it won't boot. In monitor mode it tells me there are no bootable images available. I see the new image there. I was having issues with the authentication on this box. This was the reason to upgrade the box to begin with. Now I have more problems here. If anyone can help please I could use it. The old directory where 12.2.13-JA1 was in is not there and the new image is not in a directory either if that helps.

    Please read the attachment. It shows you how to recover IOS from bootstrap. Specifically, please go to "Using the MODE button" in "Reloading the Access Point Image"
    As a side note, you cannot use HTTP interface to upgrade IOS software starting 12.2(15)JA. Below is from release notes:
    TFTP Required to Upgrade 1200 Series Access Points to this Release
    Software upgrades fail when you use the web-browser interface to install Cisco IOS Release 12.2(15)JA on 1200 series access points. The image size exceeds the access point's 4-MB restriction for software upgrades. Use TFTP to upgrade your 1200 series access point to this release. For complete instructions on using TFTP to upgrade access point software, see the "Working with Software Images" section on page 20-18 in the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points.

  • Trying to reinstall apps on ipad after ios upgrade but not downloading.

    Just upgraded both my ipad 1 and iphone 4 to iOs 5 and both had all the apps deleted after the upgrade. I'm manually reinstalling the apps but while the apps download and install fine on my iphone they are hung up in the "waiting" mode on my ipad.  Checked and the ipad is connected to the internet since I can surf the web still on the ipad.  Anyone else having issues like this?

    Change to the correct store this way.
    Settings>iTunes and App Stores>Apple ID
    Tap your ID
    Tap View Apple ID
    Enter your password
    Go to country/region in the popup window to change the store.
    Or swipe down to he bottom of the App Store in the featured tab and tap on your Apple ID. Sign out of your ID and then sign in again and see if that changes the store for you.

Maybe you are looking for

  • GL account complete deletion

    Hi All, How to delete GL account completely from the system. I think we can do that in T-code SARA. Please let me know the steps. Thanks in advance

  • Variant "_$$audit-event-count" has not been declared in the current scope.

    I migrated my bpel process manager from Version 2.1.2 [oc4j linux] to 10.1.2.0.0 [using jboss as application server]. The orabpel schema for 10.1.2.0.0 seems to be a bit different. I installed the new schema and then dumped all the data from my previ

  • Cannot log in to OSX Server using ARD

    I am struggling with a problem that I cannot figure out. I posted this on the ARD discussion group and did not get a reply. I use ARD, latest version, all updates, to remotely control about 9 machines across two locations that are linked by a pair of

  • Problem with License Server in Cisco Works LMS 3.0

    Dear all, In my LMS server it is giving error license server is down. while checking the same in process it is not running. i ahve feteched the lod also . can any one know about this error

  • Monitoring IP ISDN  status on main routers

    Dear all I would need to test the ISDN (backup) connection of peripheral routers (Cisco) to their respective main routers on a regular basis. At present this is done manually. That is the operator gets on the peripheral router through its loopback IP