IPad2 - Keynote - VGA No Display

Hello, Iam trying to get my iPad2 to display Keynote on a tv or monitor but neither seem to work. I am using the Apple iPad VGA adapter and a VGA connector to either the tv or monitor. Can someone assist me in troubleshooting? I am using iWorks 09. It appears to be configured correctly in the settings of my iPad.
Thank you all in advance of your reply.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Similar Messages

How i can present my keynote in 2nd display?

i wnat to present my keynote in 2nd display. how i can do it? i try to do, but it's always show in 1st display (my macbook). i want it to show on projecter!!!

You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the projector your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on the projector you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.

Update display panel from last nvidia driver with MSI VGA OC display ...

Hello,
I have a MSI NX7600GS under windows XP and I've update the last nvidia driver for ...
But I loose my original MSI VGA OC display tweaking panel in windows xp standard display panel ...
How can I update display panel with MSI VGA OC display tweaking panel and the last nvidia driver ?
???

Quote from: AaronYuri on 29-March-07, 23:19:28
Easy. Manually update the drivers.
Go:
My Computer > Properties > Hardware tab > Device Manager > VGA card > Right click > Properties > Driver tab > Update driver find the folder with the ForceWare driver > Click OK. Your done.
You'll have to extract the drivers out of the .exe that they come in firstly mind.
I want to keep my latest downloaded nvidia drivers and add official MSI OC tweaking in windows xp display panel, so ... you asked me to find the folder with the ForceWare driver : last (from nvidia) or previous (from MSI's CD driver) ?
And how can I extact the drivers out of the .exe without launching install procedure ?
Thanks ...

IPad2 and VGA/Video Mirroring...

I'm a teacher with a VGA projector in my classroom. I really want to get an iPad2, but I've been holding out until I could justify the purchase by using it in class (Maps, Safari, Keynote, Pages, using the cameras to record video of the kid's projects, etc).
I've been reading a lot of vague information about video mirroring, I realize that the HDMI adaptor will mirror my brand spanking new iPad to an HDTV, but that's worthless to me in the classroom. I've read a lot of people who think that video mirroring will work with the VGA adaptor and an iPad2. Can anyone definitively tell me that iPad2 and iOS4.3 will support video mirroring with the VGA adaptor so that I can use it with my classroom's projector?
Please let the answer be yes, that would be awesome. If not... Can anyone think of a workable solution? HDMI adaptor --> HDMI Cable --> HDMI to VGA adaptor --> VGA cable?
Thanks.

Scroll down the page to Apple VGA Adapter. http://www.apple.com/ipad/accessories/
It says, "Share what’s on your iPad screen with an even larger audience by connecting your iPad to a TV, monitor, projector, or LCD display that uses a VGA connector." That's full mirroring.
This is a new description for the VGA Adapter, the old description is available if you click through to "buy now". The adapter appears to be the same, I think the difference will be iOS4 software that allows full mirroring.

Want Keynotes' presenter's display to be NOT in full screen

Hello,
I do live music shows on a Single MacBook Pro. Retina Display, Running 10.10.1
In my show I run Keynote for visuals (always on a secondary large TV via HDMI out) and I run Audio via MainStage from the Logic Suite.
I want to be able to exit work in MainStage, (switching songs, changing volumes etc.) WITHOUT interrupting Keynotes Video display or pictures, text, videos etc.
How can I do this.
The only way to play a slide show is to play it, and when it plays it automatically turns the presenter's display to full scree, thereby locking me out of access to MainStage, or any other software.
Any way to play a Keynote slide show NOT in full screen for the presenter's display????
please help.

When Keynote is in play, no other applications will be seen as Keynote takes over complete control of the graphics system, if you switch from Keynote to another application, Keynote will be hidden. Keynote has always worked this way.
We use two Macs to be able to display Keynote and a second application.

Mac mini with minidisplayport to vga adapter: display does not sleep

I have a late 2009 mac mini. When using a mini displayport-vga adapter from Apple, whenever the mini puts the display to sleep the video goes black and my monitor goes into test mode (not sleeping).
It's almost like the signal to tell the display to sleep is not passing through the adapter. I have a Dell 2007WFP.
It works correctly with a minidvi-dvi adapter, but I have another computer connected via dvi so I would like to keep the mini on vga.

The dell would not go to sleep, ever.
For anyone else having the same issue, I got it resolved. I got another VGA cable and it now works perfectly. It is possible the cable I was using was older and didn't have a required wire or maybe was broken.

Thunderbolt to vga (mini display to vga adapter)

okay i got a macbook pro 2011 for christmas. i got the lg flatron 19'' w1942T and when i connect the them via mini display to vga adapter the external monitor goes into power save mode! and the mouse lags on the macbook screen...

I mean the Mini Display to VGA as in this website:
http://www.asus.com/support/FAQ/1002131/

Mac Pro 2008 with Radeon 4870 video useable resolution on DVI limited to size of minidisplay port VGA when displays are mirrored. Did not have this problem until I plugged in new monitor (miniDisplayport), but now it affects even going back original mon

Have been using the Mac Pro since 2008. Changed to a Radeon 4870 card early this year. Everything was fine.
Running an old KDS monitor from minidisplay port to VGA and a 1400x1050 projector from DVI out. Have used the
two mirrored the entire time with no trouble.
The old kDS monitor looked like it was starting to go bad so I got another monitor. Don't have much room
so it's a 14inchwith widescreen 1328x768 display. Hooked that to minidisplay port as it only has a VGA input.
Immediately the LCD display took over and restricted the output to the projector.
If I turn off mirroring, I can get projector back to normal. But this makes running programs a lot more difficult.
It worked fine with mirroring on before the monitor change. Except going back to old monitor,
now it is affecting things. I pull up display preferences. If the displays are mirrored, even setting the projector
to 1400x1050, it says "usuable resolution 1280x1024." It didn't use to do this at all.
Tried reseting NVRAM - no result.
Any suggestions would be helpful. Just looking at the image on the projector, I don't see any difference from
before.

UPDATE:
As noted in the first post, both of these newer USB DAC work fine at 24/96 on my wife's iMac, so it's clear that they didn't both become defective when I connected them to the Macbook Pro at the same time.
Resetting the Macbook Pro PRAM didn't help, so I removed the hard shell laptop case to get to the battery and remove it, then reset the SMC. After that I could use the original DAC at 24/96 again, but only IF it was plugged into the rear USB port. If I plugged it into the front USB port then the sound was garbled and filled with noise. This was a vast improvement over no sound at all.
Then I switched to the replacement/updated DAC, but I got no sound at all from either USB port at any bit-rate. And returning to the original DAC again now results in no sound again.
Sigh... I will reset the PRAM and SMC again, and see how far I can get with this. I'd still love some help. Thanks!

ADC from vid card to a VGA 2nd display, out of stock?

We have an old quicksilver G4 800 mhz tower that a co-worker wants to have a 2nd display attached to. The card has 2 outputs, a VGA and an ADC. About a year ago, I went to our local Apple Reseller (not an apple store) and bought a ADC to VGA adaptor for 30 bucks (for another machine in use). It was by Dr. Bott. There is nothing on their website now. Dr. Bott service stated that Apple had something to do with the discontinued status? Locked down their technology?
Some site show any ADC to VGA adaptor discontinued.
What is up?
Alternatives? Should I just get a new cheap graphics card? or are there ther alternatives. Yes, this is old technology, and we will get new computers, but we will have this machine a few more years...
Thanks for any help
Mac Pro 2.66 Ghz Mac OS X (10.4.7)

Apple did not try to stop others from using ADC. They made it an open standard, but few other manufacturers used it. Formac did make a LCD display with ADC. Most display makers didn't want to make models that would only work with a Mac, even though it would be cheaper (no power supply needed). Other computer makers didn't use it because they would need bigger power supplies (Apple made a CRT with ADC that needed 113 watts), adapters would be needed for most displays, and they would need special graphics cards. Because of lack of demand from other computer makers, no graphics card maker made any ADC cards for non-Apple computers.
Apple dropped AC for several reasons:
Multiple displays were being used more, and there was only one ADC per computer. DVI to ADC adapters are expensive and messy.
They wanted to sell their displays to non-Mac users.
Bigger displays needed more power (30" needs 150 watts)
With their main customer gone, the connector maker dropped the connectors, so adapter makers have no more parts for the adapters. Adapters are now scarce and expensive, but it's not Apple's fault.
There are still a few ADC to VGA adapters for sale:
<http://www.mac-pro.com/s.nl/it.A/id.230/.f?sc=2&category=128>
<http://www.welovemacs.com/mcaadcvga.html>
If the Quicksilver is the earlier (2001) model, such as the dual 800 Mhz, the adapter won't be useful with any of the graphic cards that originally came with it. It will work with 2002 Quicksilvers, such as the single 800MHz.

Is it possible to plug my iPad2 into the Cinema Display (Mini Displayport)?

I'd like to use my Cinema Display w/ Mini Displayport as my true display for my iPad2. I'm hoping to be able to use it for my light business needs at work and this would be the last thing I need to do in order to feel comfortable to make the switch.

Josh-
I'm not aware of an adapter that would connect the iPad to your Cinema Display, unless there is an intermediate adapter that would work.
You may have better luck using a different display such as an HDTV. There are adapters for other displays shown at <Cables & Docks>.
Fred

Keynote 16/9 display on Apple tv

Hello,
Is it possible to stream my 16/9 Keynote presentation (created on a MB Pro) from my Ipad3 to Apple tv and keep the 16/9 aspect ratio?
When i try the presentation turns 4/3 (not filling the screen) on the plasma display that is connected with the Apple tv....
Any thoughts?

I'm assuming you're working HDV. I don't think iDVD can make a disc that's switchable. You really should ask this question on the iDVD forum.
All the best,
Tom

VGA Studio Display compatability

Before I buy the Mac MINI, I wanted to know if the Apple Studio Display (VGA) I used with my Cube would work with it if I get a VGA adaptor and install the Studio Display software. Thanks.

Check to make sure your video card is firmly in place in the AGP or PCI slot. If l not firmly in place it can cause a black screen on boot. Also, is the backlight on the monitor lighting up when you start the monitor? Try holding a flashlight or other bright light up to the monitor to see if you can see anything, if you can see something then its working, but A) the backlight is turned down, or B) the backlight is dead.

Disappearing videos from the slides of Keynote in retina display 15" Macbook Pro

After transferring to retina 15" display macbook pro, keynote started to delete videos from the presentations without leaving a sort of mark or placeholder but just an empty slide.

You should have a backup in the first place. If you don't, buy an external drive (they're inexpensive these days) and make a Time Machine or a clone backup (using Carbon Copy Cloner).
Then take your machine to your local Apple Store or an AASP and let them diagnose the computer. See if they can isolate what may possibly be making the 'clicking' sound.
Clinton

Keynote file not displaying extension

I like to save my files with their extensions displayed. So I always make a point to uncheck "Hide Extension" when saving a Keynote file. But for some reason Keynote is being very stubborn -- whenever I save a file it decides to hide the extension. So I have to get info from Finder and uncheck "Hide Extension" after every save.
Is there any way I can get this setting to stick?
Thanks.

I just opened a new presentation and attempted to save it and "Hide Extension" is not checked. What exact steps are you going through that leads to that being checked OR leads to you having a file saved without an extension?
AHA! When you initially save, you get that choice. If you close and then reopen that file, make some changes, and save again, it saves WITHOUT the extension. It seems like you'd have to do a Save As... all of the time in order to keep the extension.
Message was edited by: Kyn Drake

Web page create with Keynote won't display

I have exported my Keynote file as a web page, uploaded to a server but when go to the web site, I get the message "slide couldn't be displayed." I am using Keynote 5.1. Any suggestions as to how to fix this?

I am having the exact same issue. It all works spledidly locally, but the minute I upload to my web host I encounter the same message.
Did you ever manage to figure this out?
BTW. I only use Safari, so the browser is not the issue.
Thanks.

IPad2 - Keynote - VGA No Display

Similar Messages

Maybe you are looking for