IPad2 No Sound (7.0.4) even after Reset, YES I have tried using volume controls!, iPad2 No Sound (7.0.4) even after Reset, YES I have tried using volume controls!
I have an iPad2 that has recently been updated with 7.0.4. After turning off my iPad, I lost all audio from the iPad. Speakers work because when in Setting>Sounds> the ringer options work. YES, I have tried using the volume controls. But now the volume controls only control the ringer options.
I have changed the option under settings for the lock out to mute and back to lock out.
I have reset all setting
I have turned off and on
I have done are hard reset (holding the 2 buttons down).
I have erased everything and started all over reset.
I still have now sound from my iPad. Again the speakers work, when I go to sound under setting and play with the volume of the ringer it plays the sound.
Why is my controls now only for a ringer after the UPDATE. Is my iPad2 a paper weight?
Alright I have made some progress. I used compressed air and then rubbing alcohol to clean contacts. I first powered off the iPad2 and cleaned with air. Then I used the new toothbrush and rubbing alcohol to clean the contacts (really not sure how that works, but I will try anything at this point). Twice the ipad turned on when cleaning contacts.
Outcome I now get sound from typing on the ipad like the typewriter sound. I did not have that before, but still no audio from apps or youtube, or anything else.
Similar Messages
-
It's a sad thing to happen but updating to iOS 6.1.3 made sound go away from my earphones tried several ones and none worked but the phone react to earphone commands and mic but won't bring out sounds and all earphones are working perfectly on other devices and I devices , please help me out with this issue
You say you have no sound in the earphones. Often that is caused by having the earphone plug not in completely. The "little noise" is there even when the earphone is not completely put in. But for sound/music it must be in completely.
-
I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then plug in the AV cable - no sound. AV first, then earphone - sound. Anyone know why?
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
I have an Ipad1 and an Ipad2. The Ipad1 cannot connect to my wifi and indicates the password is incorrect even though I am using the same password for the Ipad2??
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.
If you have lost all sound and video is freezing on you, that ain't good. Your iPad is two months old so I would not hesitate to contact Apple at all. You are entitled to 90 days of phone support.
http://www.apple.com/support/ipad/contact/.
If you want to try a couple of things on your own, try quitting all apps and then reboot the iPad - not so much for the sound issue itself - but more as a general "start all over again" sort of approach. It might help with the video freezes.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If you use headphones on occasion, you can try plugging and unplugging those as well and see if the sound comes back.
You could even try restoring the iPad to factory settings and then restore from a backup, but unless there is something totally hosed on the iPad, that should not be necessary with a two month old device - of course assuming that you didn't drop the iPad or do something accidental that could be causing the problems. -
if you can help me please alguin
Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of Adobe Creative but nothing helpWithout proper system info and otehr technical details nobody can tell you anything.
Mylenium -
I have AppleTV and Ipad2 running VJay app to my TV over a private cisco router disabled firewall but I keep loosing the video on my TV after a few minutes what can I do?
I also get this problem on my iPad, so probably not related to the AppleTV. On the iPad I restarted Airport Extreme this time, and then the iPad saw my Home Sharing.
So to recap, restarting the router or Airport Express allowed the iPad and AppleTV to see Home Sharing. Restarting AppleTV also allows AppleTV to see Home Sharing.
So does anyone have any idea?
Thanks -
Regarding Facetime on my Ipad. I get started on a call and after 10 or 15 minutes I cannot hear whom I am talking to. They can still hear me and I still have picture on the screen but my sound stops working.
Why can't we use Acrobat Pro for mobile devices? Save a whole lot of headaches!!! Now I have to return this subscription.
-
has anyone else had the problem with getting your iphone to sync? i can't get any of my newly downloaded music to sync to my phone from my itunes and i tried to delete all my music and it won't even sync to do that. i dont know what to do.
try a new/fresh apple brand cable and make sure it is the only usb cable in use. this worked for me, i noticed i had no problem with a lighting cable. i did a restore from scratch and from backup and it did not help me...and if you cant sync than you wont be able to get anything but apps back after the restore
-
Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
Apple Boot Camp Support
Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
You need Apple drivers. And you then need to add on your own audio driver.
You can run Assistant at any time to download and save a set of drivers. -
After updating to IOS 8.0.2 on my IPAD2 s Prorked great with last IOS version. Is there a bug fix?
After updating to IOS 8.0.2 on my IPAD2, I cannot print to my Samsung Wireless Printer. It worked great with last IOS version. Is there a bug fix?
Try this:
1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print. -
The sound will no longer come through my headphones on my iPad I've tried several different headsets. The sound works as normal without the headphones but will still not come through the headphones even thoug I have tried to reset it twice. This is the new ipad with retina display and is only 2 months old and otherwise works fine. Please help!
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPad. Nothing will be lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPad for a refurbished one for this price. They do not fix yours.
iPad Service Answer Center
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPad Repair - iFixit -
I'm trying to install a cd application and I keep getting the message 'you do not have permission to use the application FSP OS X' Even after selecting always allow and entering my login details it still won't accept it. Help!!..
Please repost in the Final Cut Pro forum. Have you considered upgrading your machine, if you are still running Leopard your machine may be as old as 5 years old. While this should not matter you probably won't get the performance you want out of a demanding app like FCP.
Best of luck. -
after installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.
Have you gone into system prefs nad made sure that the headphone port is set to audio out. And not audio in.
Also make sure that you are selecting built in speakers for your audio output.
If that does not fix it try doing a Pram reset.
Shut your mac down.
Press the startup button.
Hold down the following keys. Command Option P and R. Wait till you hear the chime 2 times. Then let go. See if that fixes it. -
I had restored my iPhone 4 but after restore my camera can't function well after take picture from the camera it's didn't display in the Photo Gallery even can't take a video record,how to solve this?and i had tried to restore again,still the same
kindly reply and fix this for me
reply to my email,tqMost likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.) -
recently i updated my software to 7.0.4 after that my mails automatically increased to more than 600 when actually i had not even 100. and i cant even see my mails there is no option to view them??
Illaas,
I tried the manual method. I was able to set the music/video to manual and then restarted the entire system. After restart, I re-attached the ipod touch to the computer. The sync automatically ran for everything that wasn't set to manual and it completed without a problem. I then reset the music/video to automatically sync and restarted the entire coputer/ipod set again. This time when I re-attached the ipod, EVERYTHING synced and there were no problems reported. I've never had to do this before, but I will keep it in mind if something like this happens again. Thank you for pointing me to the manual sync.
Maybe you are looking for
-
My print job is very slow. Appears to print a line then pause for awhile before printing another
psc 2175xi printing problems. Appears to print a line followed by a long pause before printing the next line or two. I tried turning off the power to reset the printer, tried troubleshooting with online services and also tried uninstalling and rein
-
Photo albums stalled following restore from iCloud
What should I do to cancel this stalled download without losing what has already been downloaded
-
Unsupported file type: unknown format
When importing .mov file into IDVD i get the following error messeage unsupported file type: unknown format
-
The computer i'm trying to install it on is my dads - we got given it by a friend, not sure about the year but i'm thinking 6years old. This is the 'about this mac' info v 10.7.5
-
Optional tray 3 won't fully close into its enclosure
Laserjet 5000 with optional tray 3. The bottom tray will no longer close into its enclosure. It closes to about 2 inches and than stops. It is getting blocked by something inside in a location that I can't visually inspect. There is nothing outside a