IPad2 screen not working after 3' drop in smart case

Hello
so the iPad got knocked off the table and is dented bottom right corner and now the screen does not work.
Just how hard is this to fix?
Maybe an iFixIt tear down reveals a simple cable to replug in?
or is it bricked from such a simple everyday accident?

I do not know how to link to threads but ling it face down and whacking it fixed it. It did not for ages but face down on bed and hit very hard with flat hand right in the centre. I presume it reseals the case around the lid. Thanks to alanfromnewtownards for the tip:
Re: i dropped my Ipad sideways, the screen is only black and it wont turn on

Similar Messages

Lenovo A1 - Touch screen not working after digitizer replacement

After dropping my tablet and breaking the digitzer, I ordered a replacement digitzer from a company in China. (It took about a month to get it) After watching this video, I was able to install my new digitizer and it finally looked new again....well at least the screen!
But.....when I powered up my tablet, the touch screen wasn't working..... I emailed back and forth with the company and they told me to install drive program, and send me a link to a site with a video, this site may have contained more than the video, but it was all in Chinese and I couldn't figure it out even with Google Translate. So I started researching. I thought I would try and load ICS on it, I thought, "Whats the worst thing that could happen?" it wasn't much more than a brick at this point anyways.
I found this website that let me through installing ICS on it. I had absolutly no expectations...but IT WORKED!!!! MY TOUCH SCREEN IS NOW WORKING!!!! I COULDN'T BELIEVE IT!!!
When I was researching for this problem, there was absolutly no posts anywhere for "Touch screen not working after new digitizer". So I wanted to share my experience.

Yea you are correct.....it must be a hardware problem. You must contact service centre of Lenovo and get help from there.
You can say thank you by pressing the star left to my post IF I HELPED YOU

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Download/install a new app
- Restore from backup
- Restore to factory daults/new iPod.

Touch screen not working after windows 10

Touch screen is not working after windows 10 was down loaded. Also the zoom keeps changing on it's own. Does anyone know how to fix this?

Could you provide the unit's Model name/number?

My ipad2 wireless not working after the update to ios 6.1.3, what can I do?

Hi, My Ipad2 could not connect again with the wireless after updated to ios 6.1.3. Pls what can I do?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HP Pavilion 11 x360 - touch screen not working after upgrading to Windows 8.1 Pro

I installed windows 8.1 pro and now my touch screen isnt working. i checked system screen and it says NO PEN OR TOUCH INPUT AVAILABLE
and i have 2 keys swoped on my keyboard. The @ and " i

Hello theow,
Welcome to the HP Forums!
I understand the touch screen on your notebook is not detected after updating to Windows 8.1.
This would be the best place to start: Troubleshooting Touch Screen Issues in Windows 8. This is a great document that covers touchscreen issues from start to finish. Do not be alarmed that it states the document pertains to TouchSmart PC's, as the steps are the same.
It would also help to know which product you are using so I can give you more detailed information, such as driver downloads.
For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
Hopefully this gets you going!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Touch screen not working after installing windows 8.1 hp pavilion ts 15-n200se laptop

touch screen keybord is comming but touch screen is not working no responses...plz help me

Hi @jewaxen
Welcome to the HP Forums!
It is a fantastic place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your touchscreen is not responding.
Was there any changes made before this issue occurred?
Have you checked for viruses or malware? Microsoft Malicious Software Removal Tool
Have you ran the HP Support Assistant to aid with HP updates and resolving issues?
Have you tried using Using automated troubleshooting (Windows 8)
Here is a link to Troubleshooting touch screen issues in Windows 8 that will guide you through some steps.
If after completing the steps in the above link the issue remains, I suggest contacting HP support for further assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Touch screen not working after update

Hi, I am using Sony laptop which have the model name: SVF14N11CXB. Till yesterday it was working fine, when I shut it down it did its mandatory update. However, today when I start it up its touch stopped working, Although this laptop is touch supported and till now the touch screen was working perfectly but today when I searched in the computer properties it is showing that this laptop is not pen or touch supported. I restored my laptop to factory default but still it is not working and making me go crazy. Please help me in this regard.
Thanks.

Hi Pirat3,
Welcome to Sony Community!
We regret to hear that the touch screen feature is not working anymore. You're right this laptop has a touchscreen function. Click here for more information. You mentioned that you reformat the computer back to factory default, if done properly the computer should be back up and running the way it was when you first got it (including the touch feature). Kindly visit this website and reformat again the computer back to default setting. Please follow thr instructions there carefully.
Keep me posted.
Thanks,
Jen
If my post answers your question, please mark it as "Accept as Solution"

Screen not working after new hard drive installed

Hi,
Can anyone help me, I just replaced my hard drive on my 15" G4 Aluminum Power Book as it had crashed and died on me. When I finished installing the new hard drive, when switching it on the screen remains blank. Does anyone have any Ideas why and how to get it working again. The screen was working before the hard drive crash. Any help will be much appreciated.
Thanks
Robby

Here are the factory specs for your HP Pavilion dv6-1210sa Entertainment Notebook Computer. Based on the specs, the original hard drive was 250GB. This could be a factor in your issue. It could also be that the drive is an advanced format (AF) drive. Please provide the model of the drive for our review.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Thinkpad X61 screen not working after driver install?

Recently I decided to change my operating system on my Thinkpad X61 so I completly refreshed the system and installed Windows 7 . I finished the install and it seemed to boot properly . As I began to install my drivers via the Lenovo website it asked for a RESART. After restarting the PC it wouldnt show a screen . I've tried to connect to another output and that didnt work.
As for the motherboard theory I honestly dont think that is the problem because I've seen several people on several forums discuss the same problem and they've found a solution but I cant seem to get anyone to discuss what that solution was.
I am a student so I am in need of my computer so if someone could please help me as soon as possible.
Moderator note; moved to correct board

Are you really talking about X61? If so, this is the wrong forum, but regardless, here is what to do. Pull the battery out. Unplug the machine, and press the power button several times, holding it for 5 seconds the last time. Put the battery back and plug it in. Turn it on and try to boot into the BIOS. If the screen stays black, either the screen or the motherboard has died. If you can plug it into an external monitor and try again, you can tell which one it is.

Touch screen not working after system update

A few months ago, my laptop (Satelitte P55t-A5202) went through an automatic system update. Ever since then, my touch screen won't work. I followed the directions to reinstall the HDI programs several times. The first time it worked but only for a few hours. The next time I tried to reinstall, it worked for a second. Now reinstalls do nothing.
Before the system update, my touchscreen worked fine. And in reading the forums, this seems to be a common problem with the updates. I called TOSHIBA customer service for help. The FIRST thing they want to do is charge me for tech support because my laptop is out of warranty. I told the customer service rep repeatedly that my touch screen worked fine until the update. He refused to give me any help because I did not want to pay for him to tell me how to resolve...
In my opinion, this is a toshiba issue not mine so regardless if my laptop is out of warranty, Toshiba should take ownership and be accountable for the problems they cause.
Does anyone have any suggestions as to how to take care of this?
By the way, Toshiba customer service representative was rude, you could barely understand him because of his accent, I had to repeat SEVERAL times what my issue was because he couldn't get past the warranty issue and I had to ask several times to speak with a supervisor ( to which he told me a supervisor would call me instead)

See my reply in the laptop forum.
-Jerry

Popup screen not working after upgrade to APEX 3.0

Hi,
I have upgraded my APEX installation from version 1.6 to version 3. My application has some popup screens that are displayed when a user presses a button. These popups have now stop working and when you press them, the user is presented with the login page.
I suspect this is because I am not passing the SESSION value in the URL when the page is displayed. The following code is the javascript that is called from one of the buttons :-
function sa_popup2() {
var field_value = document.getElementById("f22@0").value;
if ( document.getElementById("f22@0").value != "" ) {
var enqNo = document.getElementById("P17_ENQUIRY_NO") ? document.getElementById("P17_ENQUIRY_NO").value : -1;
var enqLineNo = wwv_flow.f02[0].value;
var str=document.getElementById("P17_PROCESS_CHRG_INCL").value;
var outstring = str.replace(/%null%/,"");
windowAddress = 'f?p=200:228:::::P228_CUS_ID,P228_ENQ_STATUS,P228_PROCESSING_CHRG,P228_ENQUIRY_NO,P228_ENQUIRY_LINE_NO:'+document.getElementById("P17_CUS_ID").value+','+document.getElementById("P17_ENQ_STATUS").value+','+outstring + ',' + enqNo + ',' + enqLineNo ;
w = open(windowAddress,"winhelp","Scrollbars=1,resizable=1,width=500,height=350");
You can see from the above that when the windowaddress variable is set it does not include the session value. In APEX 1.6 when the popup is displayed the SESSION is automatically populated in the URL, but in APEX 3 it is not populating.
Is there a way I can get this to continue working without changing my javascript function. This approach has been used throughout my applications, and I do not want to have to change the code if I don't need to.
Rgds
Paul

Hi Paul,
Yes, as you suspect, it's the fact that you're not passing the session across. I would definitely recommend recoding to include the session.

Help! My iPod touch is not working after I dropped it!

I have the iPod touch 4G. I was sitting down, and when I stood up it fell out of my pocket and onto the tile floor. It feel on the back of it while wearing it's case (a paul frank one that's 2 weeks old). It's screen has been smashed before, but I had it fixed, and it's been working great since. I tried plugging it into the charger, holding down the power button, and holding down the power and home button together. Can anyone give me some advice on what I should do or what might be wrong?? I've had it since about Christmas.
Thanks!!
SockMonkeyLove

See the not-charging topic of:
iPod touch: Hardware troubleshooting
Have you tried another cable?
Another charging source? Does iTunes see the iPod when you connect to your computer?
Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic.
An appointment at the Genius Bar of an Apple store would be next.

IPod Touch Screen not Working after using Assistive Touch

Hey everyone!
Yesterday my iPod Touch 4th gen touch screen froze (not the screen itself - it still wakes from sleep & responds to notifications and charging etc.), after myself accidentally taping 'Voice Control' on Assistive Touch.
I was wondering, since it's out of warranty (it's a couple of years old), I can't send it back. I'm currently backing up & restoring it.
Can anyone tell me if it's the software or hardware? It's going to take at least a good day or so to backup & restore, due to storage is full, and it's 32GB capacity, so it'd be good to know in advance.
And if anyone has got any other suggestions to fix it, please let me know! It'll be much appreciated.
Thanks heaps!
PS. Please don't tell me to repair it...it'll cost just as much to fix my whole iPod, buttons & screen than it is to buy a brand new one!!

There is really no what to know if hardware or software problem without trying to restoring the iPod. First from backup and then to factory settings/new iPod. If still problem then it is a hardware problem.

My video camera on iPad2 does not work

My video camera on iPad2 does not work after installing ios7. Anyone else have the same issue? Photos can be taken but not video. Odd.

You shouldn't feel stupid, rather I think Apple should feel stupid. I swear I used to be able to simply select "Video" in the previous IOS version (rather than swipe). What value is there in having to have everyone relearn how to use their iPad?

IPad2 screen not working after 3' drop in smart case

Similar Messages

Maybe you are looking for