Ipad2 shutting down automatically requiring power start

My ipad2 purchased last march worked fine until this week. The ipad2 shuts down completely on its own. Apple support showed me how to restart by holding down the power button and face side button for 30 seconds. This usually works on my iPhone but was only temporary
Purchased a $30 new power plug and no difference. Able to fully charge but shuts down on its own after a minute or so.
Updated iTunes to latest version then updated to ios5
Turned off settings for iPad cover to not shut off, no difference

Additional note. The auto shutdown issue started prior to updating to ios5. Had hoped that ios5 would solve problem.

Similar Messages

HT1430 My ipad2 shut down randomly and than start. Problem is remain after reset. Please help!

My ipad2 shut down randomly and than start. Problem is remain after reset. What is the solution.

You can try restoring your iPad as new using iTunes on your computer. This will load a new copy of the iOS software onto your iPad.
If this doesn't work you may have a hardware problem and will need to contact Apple Support.

My ipad2 shuts down completely after I press the sleep button and does not start.... Help please

My ipad2 shuts down completely after I press the sleep button and does not start.... Help please
This started since the latest update!!!!!!!!!!!!!!

Hi Alkaf,
Welcome to Apple Support Communities.
It sounds like your iPad will not turn on. Take a look at the iPhone article linked below, it provides tips that will help resolve power issues for both iPhones and iPads.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
-Jason

Last Wednesday my iPhone 4 shut down automatically and it wouldn't let me reboot for about a half an hour. It finally rebooted and then it started with the batterty drainage and no service, going in and out of service. What's wrong?

Hi everyone... Last Wednesday my iPhone 4 shut down automatically... I had battery. It took about a half an hour to reboot it. After that I started having trouble with going in and out of service and battery drainage. I do have that update 5 ios... or whatever its called... but I did that about 2-3 months ago and had no problems. I called Apple and they wouldn't do a **** thing for me. I called AT&T and they reset the network... didn't work. I did a hard shut down and didn't work. Now today, every call I had was dropped. So of course this morning when I woke up at like 8:30 am by 10:30 am my battery went from 100% to 35%. ***. Can someone help me???

Hi everyone... Last Wednesday my iPhone 4 shut down automatically... I had battery. It took about a half an hour to reboot it. After that I started having trouble with going in and out of service and battery drainage. I do have that update 5 ios... or whatever its called... but I did that about 2-3 months ago and had no problems. I called Apple and they wouldn't do a **** thing for me. I called AT&T and they reset the network... didn't work. I did a hard shut down and didn't work. Now today, every call I had was dropped. So of course this morning when I woke up at like 8:30 am by 10:30 am my battery went from 100% to 35%. ***. Can someone help me???

Desktop shutting down automatically and unable to start up

The computer will shut down automatically overnight and then it takes about 10 minutes of pressing the power button, unplugging the power lead from the PC, switching off and unplugging the power lead from the wall to be able to turn the computer on.
We have had the computer for 4 weeks and this has happened 5 times.
Any assistance would be appreciated.

Hi,
I would not stand for that that type of PC behavior with a new PC. Your PC is covered by warranty so you should contact HP Support. Return the PC if you can as it might be a bigger issue than you think later on.
HP's support number is 800-474-6836 or 800-HPINVENT or online here.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

IMovie required an update, now it is shutting down automatically. Please help.

iMovie required an update, now it is shutting down automatically. Please Help.

To stop Auto updates use: '''Tools -> Options -> Advanced -> Update Tab ''' <br> select the options you require ( see [[Updating Firefox]] )
As for why your version does not work I do not know but suggest you look at:
* [[Safe Mode]] Note when using safe mode do not make changes on the first dialogue Window you see; click the Continue button
* [[Basic Troubleshooting]]
You may also need to review the versions of Java see
* [[Using the Java plugin with Firefox]]
* "Why do I need Java 6 Update 10 and above for Firefox 3.6 and later versions? " - http://www.java.com/en/download/faq/firefox_newplugin.xml
Your System details show you as using version 3.6.12 of Firefox, that is not the latest version, it would be normal practice to update to the latest version, which is why you are being offered the updates. See also [[Software Update Failed]]

My IMAC seems to have died after power surge. It shut down and won't start. What shall I do?

my IMAC seems to have died after power surge. It shut down and won't start. What shall I do?

I would recommend you try an SMC reset at this point:
Resetting the System Management Controller (SMC)
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
If that fails to solve it, it is probable that the power surge damaged some of your iMac's hardware components, and will need to be repaired at an Apple Authorized Service Center.

MSI CX623 shut down automatically

I have a notebook MSI cx623 with next configuration: Intel Core I3 390m 2.66Ghz, 4GB RAM, video dedicated Nvidia Geforce 310m 1GB and HDD WD 320 GB
And I have next problem: this shut down automatically without any warning and if i want to start back I must disconnect it from the power and remove battery about 2 second

Guess not, huh.
Seems like such an obvious feature?
C.

MacBook Air shuts down automatically

My MacBook Air shuts down automatically. It does not start up .
Any ideas?

Auto shutdowns outside of power feed issue indicates SSD or logic board failure.
Contact Apple for in shop free diagnostics and full evaluation for parts replacement. Avail yourself of the warranty you paid for

WebLogic server is shut down automatically

          After i install weblogic6.1 and run default server, I got the fowllowing message
          and then server is shut down automatically, I tried it days before, and it works,
          why not work now?
          Thanks in advance!
          moonriver
          <Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
          Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
          <Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
          for production server.>
          <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
          server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
          Perhaps another process is using port 7002.>
          <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
          is no longer listening for connections. You should probably restart it.>
          <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
          requested by system>
          <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
          has been initiated.>
          <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
          server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
          Perhaps another process is using port 7001.>
          <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
          requested by system>
          <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
          has been initiated.>
          <Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
          "myserver" for domain "mydomain" running in Production Mode>


Most likely you have another WebLogic instance already listening on 7001.
          Moonriver Sun <[email protected]> wrote:
          > After i install weblogic6.1 and run default server, I got the fowllowing message
          > and then server is shut down automatically, I tried it days before, and it works,
          > why not work now?
          > Thanks in advance!
          > moonriver
          > -----------------
          > <Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
          > Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
          > <Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
          > for production server.>
          > <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
          > server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
          > Perhaps another process is using port 7002.>
          > <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
          > is no longer listening for connections. You should probably restart it.>
          > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
          > requested by system>
          > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
          > has been initiated.>
          > <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
          > server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
          > Perhaps another process is using port 7001.>
          > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
          > requested by system>
          > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
          > has been initiated.>
          > <Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
          > "myserver" for domain "mydomain" running in Production Mode>
          Dimitri

WebLogic server is shut down automatically(in win2k pro)

After i install weblogic6.1 and run default server, I got the fowllowing message
and then server is shut down automatically, I tried it days before, and it works,
why not work now?
Thanks in advance!
moonriver
<Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
<Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
for production server.>
<Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
Perhaps another process is using port 7002.>
<Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
is no longer listening for connections. You should probably restart it.>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
requested by system>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
<Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
Perhaps another process is using port 7001.>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
requested by system>
<Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
<Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
"myserver" for domain "mydomain" running in Production Mode>

[att1.html]

Hi, 3 weeks ago i just got my iphone4 for and then i upgraded it to iOS5..am just wondrin', does changing of the iOS causes the phone to shuts down automatically and turn on again? thanks.. =)

hi, 3 weeks ago i just got my iphone4 for and then i upgraded it to iOS5..am just wondrin', does changing or upgrading the OS causes the phone to shuts down automatically and turn on again? thanks.. =)

How long are you leaving it on the charger?
Are you connecting it directly to an electrical outlet or trying to charge via USB? USB may not provide enough power to adequately charge the device if the battery is that low.
If none of that helps, then the only option would be a warranty replacement as either the battery or system board is bad.

MacBook shut down automatically when rebooting

I have The following problem after installing mac osx lion on my Mac book: The computer shuts down automatically few seconds after i reboot The computer. Please help. I checked The disk utility but there are nô errors on The disk.

Hi
Have you solve your problem yet? Mine was the same - it's Dockables "fault"
Were you able to boot into Safe Mode, by pressing and holding Shift key at Start up, I think you need to press and hold a while, till you see a progress bar below the Apple logo.
Then you can quickly go and delete all the Dockables.
If you found another way to boot up, also delete Dockables immediately.
Cheers

Phone shut down automatically

my phone just shut down automatically and i've just bought in not more than a month !! OmG
And now i cant switch it on ... How?

First plug it into a charger and wait at least 15 to 20 minutes to give the battery some charge in case the battery has completely discharged.
Then press both the Home and Power On button together for some 15 seconds or so until the apple logo appears (ignore the power off red slider if it appears and keep on holding the buttons). Let go when the apple logo appears and wait until the iPhone resets and restarts.
Hope this helps.

Premiere Elements 10 on Vista freezes and shut down automatically.

I have a recently bought Adobe Premiere Elements 10 for Windows Vista. After initializing the software and start editing videos, in about 5 minutes it freezes, an error message pops-up and the program automatically shuts down. I have already uninstalled and reinstalled the software, and the license key is correct, but it insists in shut down automatically, what should I do?
PC settings:
160 gb Hard Drive/ 22gb free space
processor: Pentium Dual Core T4200 @ 2.00 ghz 2.00 ghz
RAM: 4 gb
Windows Vista 32 bit

My 3 hard drives to edit AVCHD are configured as...
1 - 320Gig Boot for Win7 64bit Pro and all program installs
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folder and files
3 - 1Terabyte data for all video files... input & output files (*)
(*) for 4 drives, drive 3 all source files & drive 4 all output files
Search Microsoft to find out how to redirect your Windows paging swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
http://www.video2brain.com/en/videos-5353.htm
http://forums.adobe.com/thread/784220?tstart=0
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
Partition = Crash http://forums.adobe.com/thread/957286
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Ipad2 shutting down automatically requiring power start

Similar Messages

Maybe you are looking for