IPad2 still showing iTunes even when going through the restore iPad button

Even after clicking on restore iPad I am still getting the following:
The iPad "iPad" could not be restored. An unknown error has occurred (1).
Any help would be appreciated.

http://support.apple.com/kb/TS3694#1
https://discussions.apple.com/thread/3393959?tstart=0
more
https://www.google.dk/webhp?sourceid=chrome-instant&ion=1&espv=2&es_th=1&ie=UTF- 8#q=ipad%20restore%20error%201

Similar Messages

  • HT1212 I am trying to restore my ipad (disabled and connect to itunes), but when going through the steps, it's asking me for my passcode.  I can't put that in because it's disbled.  This is the WORST product and product instructions I have ever dealt with

    My ipad is disabled and it tells me to connect to itunes.  However, once I've connected to iTUNES, it ask me for my passcode and of course, I can't put that in because my ipad is disabled.  I am ready to throw this iPad out the window.  Wll never buy another one.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • I recently downloaded a movie with an avi extension, I changed it to .m4v and then tried to import it into iTunes but never goes through the importing process and it never shows up.

    I recently downloaded a movie with an avi extension, I changed it to .m4v and then tried to import it into iTunes but never goes through the importing process and it never shows up.

    That WON'T convert it.
    If I do the same with an MP3 and change the extension to JPG, it DOESN'T make it a picture. It makes it unusable.
    Change it back to AVI and download "Handbrake". http://handbrake.fr/
    Use HandBrake to "convert" it to M4V.

  • HT204406 When I activate iTunes Match it goes through the process of analysing my library, then it matches a few songs but always then stops stating that the network dropped out - any ideas?

    When I activate iTunes Match it goes through the process of analysing my library, then it matches a few songs but always then stops stating that the network dropped out - any ideas?

    Bstarling wrote:
    I am unable to write down because the log is moving too quickly.
    Well, you don't have to write down anything. Just click on the message and copy it. Then paste it here, or in a text editor (eg, TextEdit). And you can enter a string like "Audio CD" (w/o the quote marks) in the filter and see only messages containing it.
    mds[71]: (Error) Server: Failed to register path "/Volumes/Audio CD"
    That's the metadata server, used by Spotlight. AFAIK, Spotlight does not index audio CDs, so what is this about? I don't know. Maybe it's the cause of what you observe; or maybe it's another symptom. Thinking again of the network issue… have you maybe installed some third-party software related to both Spotlight and the network (Searchlight perhaps)?

  • When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

    When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

    That is usually caused by a missing unpack directive (<em:unpack>true</em:unpack>) in the file install.rdf of that extension.
    See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
    -----

  • My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

    My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

    That's usually a symptom of a phone that was hacked or jailbroken to unlock it.

  • RoboHelp Server 8 Not Displaying All TOCs When Going through the Engine

    Hello,
    We recently upgraded from X5 to X8 and imported and converted our X5 project to X8 without any problems. After our conversion, we are having TOC issues.
    Here is our issue. Not all of our TOCs are displaying when we veiw our project through the engine, but if we view the project directly (without) going through the engine all of our TOCs display correctly. I've tried creating a new TOC and checking the Copy existing Table of Content box and deleting the old TOC and that did not work. I removed the following characters in the TOC (&, <, >,) and that did not work. I also tried deleting a book with topic pages within the book and re-creating the book and adding the topic pages in the book and no solution. It seems like i've tried everything to resolve our issue and nothing has worked so far.Our books have topic pages linked to it.
    I've searched the forums and i have not seen anyone else with the same issue. Any help would be greatly appreciated.
    Thanks

    Hi Ian,
    Just zip them up and send them to me in a private message.
    Tulika.

  • I cannot get the STOP button to appear in the Navigation Toolbar, even after going through the suggestions; it will appear when the Restore Default Set window is open, but disappears as soon as DONE is clicked

    The X for STOP loading the page does not appear in the Navigation Toolbar. If I do the right click, select Customize, Restore Default Set, it appears; click Done and it disappears. I have disabled the theme; disabled all extensions; reset the toolbar & controls; unchecked the acceleration. No luck.

    Starting in Firefox 4, the Go, Stop and Reload buttons are combined in one button at the right end of the URL or Address bar. The button changes depending on the activity:
    *green Go arrow when typing in the address bar
    *red Stop ("X") button while page is loading
    *gray Reload (circular arrow) when page is finished loading.
    Separate buttons are possible:
    #Open Customize Toolbar window by clicking Firefox button > Option > Toolbar Layout '''''OR''''' clicking View > Toolbars > Customize if using the Menu Bar '''OR''' right-click in an empty space on a toolbar and choose Customize
    #Stop and Reload buttons will show separated between the address bar and the search bar
    #drag the buttons anywhere on the Navigation toolbar
    #*order Reload-Stop will combine into one button
    #*order Stop-Reload will remain separate buttons
    #*or drag a "Separator" from the Customize window between Reload-Stop and they will remain separate
    #click Done at bottom right of Customize window to finish
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    You have multiple old versions of Java Console installed that Java did not clean up when updating. Your old versions are: 6.0.16, 6.0.22<br />
    Follow these instructions to remove the old versions: http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions

  • Ipad2 won't shut down even when i press the sleep/wake button and the home button at the same time.

    I can't shut down my ipad2 even when i press and hold the sleep/wake button and the home button at the same time.

    If the screen appears to be zoomed in, then does tapping the screen with three fingers zoom you back out ? When zoom is on you should also be able to scroll around the screen using three fingers on the screen.
    If you are seeing the keypad then that should be for the iPad's passcode, I assume that you have one set ? If the iPad is disabled then I wouldn't expect the keypad to show.

  • I can't play a song in iTunes even when I authorized the computer (i have only 1 authorized)

    I have my iMac authorized to play all my iTunes purchase, but there's one song that I can't play. It keeps asking me for authorization and when I submit my ID and Password, it goes to the next song (I can´t play it neither in my iPad or iPhone).
    Greetings and thank you very much

    Click here and request assistance.
    (86286)

  • Playback is intermittent from my iPad when going through the stereo

    This happens even when I directly connect to the receiver (Denon 1713) via USB port.  It does not happen when playing music through the iPad speaker, and it does not happen when playing other audio, such as streaming netflix or Pandora.  It is definitely an issue of communication between the iPad and the receiver.  Any thoughts?

    From pp. 78-79 of the iPad User Manual:

  • RoboHelp Server 8 Displays Blank Page When Going through the Engine

    Here is my issue.
    I have 6 projects between 2 areas on our RoboHelp Server 8.  I have
    never had any problems publishing to the server, our IT department had no problems setting up the server including
    installing Tomcat.  We've changed the port so it would run on the default http port 80.  Everything was running smoothly until this morning.  When we go to the link that is used to run through the engine (i.e. http://server name:port/robohelp/server?prj=project name&area=areaname), instead of the redirecting page that we normally get, we get a blank white page that shows done in the status bar.  Our IT department has tried to restart the server, did not fix the problem, they tried to restart the services (i.e. Tomcat and the RoboEngine), did not fix the problem.  I have tried to connect to the server through the RoboHelp development interface and I get an Connection to Server Failed error.  I have checked the publishing interface for Webhelp Pro ,which is what we use and all the setting are correct.  When I try and refresh the area I get the Unable to get area list from server.  We can get to the projects as if what we are using Webhelp.  We would use regular Webhelp but that does us no good because then there is no reporting features because it is not running through the engine.
    When I go though the Web Admin Interface and try to look at the project section we get an Server is refreshing project data, try again later.  This is the same error we have received all day.    I'm now stuck and don't know what to do or try.  Between my IT dept and myself we tried everything we can think of.
    Just another tidbit so it can be ruled out.  I have applied the patch to my copy of RoboHelp 8.0.2 patch.  And since I'm the only developer right now, that should not be the issue.
    I have not tried to delete the project form the server, because
    a. I can't see them in the projects pane so I can't delete them and
    b. I cannot connect to the server to re-publish them.
    Any advise in the matter would be greatly appreciated.
    Thanks,
    Ian

    Hi Ian,
    Just zip them up and send them to me in a private message.
    Tulika.

  • Why does apple tv always connect to itunes even when I own the movie and it is on my computer?

    So I have my entire itunes library on a HD that I bring with my laptop back and forth. My problem is not at my house where I have an internet connection, but it is at my cabin in the woods where I do not have an internet connection.  Why is my apple tv always trying to connect to the itunes store whenever the movie I am trying to play is on my computer and on the network?  I have an airport express setup creating my network, but like I said I do not have an internet connection.  I am just using the AX to give me a wifi network.  It is constantly looking for the itunes store.  Is there a way to bypass this, or is this a Apple security feature?  Thanks

    I understand that point. They are mostly bought from iTunes. But, I can watch on my laptop, iPad, iPhone on an airplane or wherever without an Internet connection. So why the hang up on my apple tv, should it not just be an extension of my laptop?

  • Macbook Pro Retina (July 2014) will not register TOUCH events when going through the AIR DEBUG LAUNCHER for MOBILE

    I recently purchased a MACBOOK PRO with a retina screen and have started to transition to it as a primary work computer.
    I have a game that is built on another Macbook Pro (non retina) that works fine in the AIR debug launcher for mobile but when I launch it from the RETINA device, the touch events seem to not register correctly.
    Has anyone else experienced this issue?

    To further clarify, it appears the touch simulator is cutting everything in half, maybe because of the pixel density?

  • ITunes freezes when I click the BURN CD button any help please? Toonz?

    I've updated the drivers and firmware but no change.
    It just started doing this when I upgraded iTunes 1 week ago.
    Here's my PC info:
    Microsoft Windows 2000 Professional Service Pack 4 (Build 2195)
    To Be Filled By O.E.M. To Be Filled By O.E.M.
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: ASAPIW2k (6.0.2.0), AFS2K (3.1.14.0), PFC (2.5.0.201), MxlW2k (1.1.0.116), Cdr4_2K (5.3.2.31),
    UpperFilters: GEARAspiWDM (2.0.4.3), Cdralw2k (5.3.2.31),
    Video Driver: RADEON 9600 SERIES - \RADEON 9600 SERIES -
    Found aspi32 running.
    IDE\DiskMAXTOR6L040J2_________________________A93.0500, Bus Type ATA, Bus Address [1,0]
    IDE\DiskWDCWD1200BB-00FTA0____________________15.05R15, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomAOPENDVD1648/AAP_______________________1.07___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STDVDRAM_GSA-4081B_______________A104___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: AOPEN DVD1648/AAP, Rev 1.07
    Audio CD in drive.
    Found 15 songs on CD, playing time 53:20 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:49:10
    Track 3, start time 06:10:35
    Track 4, start time 10:06:27
    Track 5, start time 14:30:27
    Track 6, start time 18:47:50
    Track 7, start time 22:21:22
    Track 8, start time 25:48:32
    Track 9, start time 29:03:37
    Track 10, start time 31:30:45
    Track 11, start time 34:36:20
    Track 12, start time 39:01:27
    Track 13, start time 44:19:50
    Track 14, start time 47:00:60
    Track 15, start time 50:44:12
    Audio CD reading succeeded.
    Get drive speed succeeded.
    E: HL-DT-ST DVDRAM GSA-4081B, Rev A104
    Audio CD in drive.
    Found 13 songs on CD, playing time 45:43 on Audio CD.
    Track 1, start time 00:02:33
    Track 2, start time 00:44:40
    Track 3, start time 03:39:25
    Track 4, start time 07:55:68
    Track 5, start time 12:28:50
    Track 6, start time 15:39:45
    Track 7, start time 19:58:73
    Track 8, start time 23:26:65
    Track 9, start time 24:04:28
    Track 10, start time 28:19:43
    Track 11, start time 30:02:25
    Track 12, start time 35:21:60
    Track 13, start time 43:07:25
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 24.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: HL-DT-ST DVDRAM GSA-4081B on -128(0xffffff80) media at speed 0X.
    I update drivers on a regular basis. Anyone have a fix?
    Thanks for your time.
    Oxford

    Thanks for your question.
    My system has all of the updates and drivers. The problem stated when I upgraded iTunes.
    Are you suggesting that because of that, I need to upgrade to Windows XP?
    Many people are having the same problem as I, and they already have Windows XP....so I doubt that is the problem.
    My question is:
    Where can I find an older revision of iTunes? At least then we could use our burners until apple fixes this bug, and then upgrade.
    Thanks again,
    oxford

Maybe you are looking for