IPad2 update to iOS5 failed and restore fails with error code (6)

I have updated my iTunes to version 10.5 (on Windows 7 32-bit). After that and creating a back up of my iPad, I started the update to iOS5.
For some unclear reason it failed. The only option left was to do a restore.
This restore process starts and I see a progress bar on the iPad.
However iTunes comes up with an error message (translated from Dutch): "The iPad iPad cannot be restored. An unknown error code has occured (6)".
Whatever I try my iPad only shows the iTunes Logo with the USB connector.
Can anybody advice on how to I get my iPad running?
Regards,
Frans.

Only after submitting my question other answers were shown. The error code to which 6 refers is shown on the next page: http://support.apple.com/kb/TS1275
In effect: I had to shutdown my Firewall! (How close do you have to be with a vendor).
After the Firewall (ZoneAlarm) was shutdown, the restore worked. and it gave me iOS5

Similar Messages

Exchange 2010 Sp2 update rollup 7 fails with error code 80070643 on Sbs 2011

Hello Everyone,
When i trie to install rollup 7 voor exchange 2010 sp2 (sbs 2011) it gives me error code 80070643. I cannot find much to solve this problem. Update rollup 8 installs fine. I've read on internet that every rollup must be installed to succesfully install exchange
2010 sp3. Can anyone help me with this error?

I just installed exchange 2010 sp3, but it does not finish. It stops at 'client access role'
This is in the log;
[10-08-2014 21:55:24.0121] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'server.company.com', Preferred Global Catalog: 'server.company.com', Preferred Domain Controllers:
'{ server.company.com }'
[10-08-2014 21:55:24.0121] [2] Beginning processing Start-SetupProcess -Name:'iisreset' -Args:'/noforce /timeout:120'
[10-08-2014 21:55:24.0137] [2] Starting: iisreset with arguments: /noforce /timeout:120
[10-08-2014 21:55:31.0640] [2] Process standard output: Attempting stop...
Internet services successfully stopped
Attempting start...
Restart attempt failed.
The IIS Admin Service or the World Wide Web Publishing Service, or a service dependent on them failed to start. The service, or dependent services, may had an error during its startup or may be disabled.
Process standard error:
[10-08-2014 21:55:31.0640] [2] [ERROR] Unexpected Error
[10-08-2014 21:55:31.0640] [2] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [2] Ending processing Start-SetupProcess
[10-08-2014 21:55:31.0640] [1] The following 1 error(s) occurred during task execution:
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR] The following error was generated when "$error.Clear();
Start-SetupProcess -Name "iisreset" -Args "/noforce /timeout:120"
" was run: "Process execution failed with exit code 1062.".
[10-08-2014 21:55:31.0640] [1] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR-REFERENCE] Id=ClientAccessServiceControl___ef7fa14362774cd9af8882d6287b640a Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[10-08-2014 21:55:31.0640] [1] Setup is stopping now because of one or more critical errors.
[10-08-2014 21:55:31.0640] [1] Finished executing component tasks.
[10-08-2014 21:55:31.0672] [1] Ending processing Install-ClientAccessRole
Anyone has any ideas?

I have downloaded the Photoshop trial in CC when it gets to the updating stage it fails with error code 49

It told me to retry or contact support - I have retried several times & it keeps coming back to error code (49)

Generally, this error is caused by something running on the computer which may be locking files that are trying to be updated. First, try simply restarting the computer to close running applications and unlock all files. If that does not allow the update to complete, try disabling all applications which run in the background. Disable startup items, services | Windows or Start in Safe Boot mode | Mac OS X

Built-In Keyboard Firmware Update 1.0 fails with error 23:3 on MacBook 2,1

I attempted to install "Built-In Keyboard Firmware Update 1.0" on two laptops tonight.
Macbook Pro 3,1:
Hadn't experienced the issue that the firmware would resolve. Installed the update anyway, successfully, and continued to have no problems since.
Macbook 2,1:
Hadn't experienced the issue that the firmware would resolve. Tried to install the update, but it failed with error "23:3". After the failure, the keyboard was non-responsive for about 30-60 seconds, during which time I assume it restored/re"booted" itself. Keyboard function was restored automatically after this time, though there was no indication that it would return, and I had to suffer a minor sweat. Still, I didn't learn I power cycled the system and tried again, but the update never installed successfully.
Lessons learned -
If it ain't broken...
That said, Apple seems to have designed their hardware well enough to be able to recover from a failed firmware update. In this case, you just have to pray a little until the keyboard responds again.
Apple: be so kind, let us know what 23:3 means, and if needed, update the Firmware Updater.
//

Hi,
I was just wondering how you were able to get the macbook to accept the update? I had to take mine to apple store and get entire keyboard and trackpad replaced in my macbook. They then told me to ignore the update cause they did not have any other keyboards to replace if it happened again.

Critical patch update fails with error code 73

RDBMS Version: 10.2.0.3
Operating System and Version: solaris 5.9
Error Number (if applicable): error code 73
Product (i.e. SQL*Loader, Import, etc.): oracle server enterpirse edition
Product Version: 10.2.0.3
Critical patch update fails with errors(urgent)
UD00_102030>pwd
/mnt/base_install/downloads/10gR2/cpu/6394981
UD00_102030> opatch apply
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /u01/app/oracle/product/10.2.0
Central Inventory : /u01/app/oracle/oraInventory
from : /var/opt/oracle/oraInst.loc
OPatch version : 10.2.0.3.0
OUI version : 10.2.0.3.0
OUI location : /u01/app/oracle/product/10.2.0/oui
Log file location : /u01/app/oracle/product/10.2.0/cfgtoollogs/opatch/opatch2007-10-19_19-53-31PM.log
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /mnt/base_install/downloads/10gR2/cpu/6394981
Details = PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
This cpu oct 2007 patch for 10.2.0.3(for solaris)

That's great :) ...
Does anybody know which is the difference between
opatch napply
and
opatch apply ?
thanks,
P.

Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen

CC app manager update failed with error code 50 after reaching about 35%

Trying to update the CC app manager. The update is always very slow (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks. I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
The user suggested fix that worked for me was:
1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
2) Started the creative cloud desktop app.
3) The app said it needed to be updated. I hit the update button.
4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
5) Restarted computer in normal mode.
6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

Calendaring agent failed with error code 0x8000ffff Event id 8206 and 8207

Hi to all
We have an Exchange 2007 SP3 with Update Rollup 11 and all the user use Outlook 2003 with SP3.
Suddenly in our Exchange Server we have start to receive a lot of 8206 and 8207 EXCDO errors in the Application.
Event Type: Error
Event Source: EXCDO
Event Category: General
Event ID: 8206
Date:  5/2/2015
Time:  11:17:41 πμ
User:  N/A
Computer: EXCHANGESRV1
Description:
Calendaring agent failed with error code 0x8000ffff while saving appointment.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 48 72 53 61 76 69 6e 67   HrSaving
0008: 41 70 70 74 3a 3a 48 72   Appt::Hr
0010: 43 68 65 63 6b 50 61 74   CheckPat
0018: 74 65 72 6e 20 66 61 69   tern fai
0020: 6c 65 64 2e 20 4d 61 69   led. Mai
0028: 6c 62 6f 78 3a 56 61 73   lbox:x
0030: 73 69 6c 69 73 2e 4b 6f   xxxx.xxx
0038: 6e 74 6f 67 69 61 6e 6e   xxxxxxx
0040: 69 73 40 45 55 52 4f 43   xx@xxxx
0048: 48 41 52 54 49 4b 49 2e   xxxxxxx.
0050: 47 52                     GR
Event Type: Error
Event Source: EXCDO
Event Category: General
Event ID: 8207
Date:  5/2/2015
Time:  11:19:41 πμ
User:  N/A
Computer: EXCHANGESRV1
Description:
Calendaring agent failed with error code 0x8000ffff while deleting appointment.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 48 72 44 65 6c 65 74 69   HrDeleti
0008: 6e 67 41 70 70 74 3a 3a   ngAppt::
0010: 5f 48 72 47 65 74 42 75   _HrGetBu
0018: 73 79 49 6e 66 6f 20 66   syInfo f
0020: 61 69 6c 65 64 2e 20 4d   ailed. M
0028: 61 69 6c 62 6f 78 3a 56   ailbox:x
0030: 61 73 73 69 6c 69 73 2e   xxxx.xxx
0038: 4b 6f 6e 74 6f 67 69 61   xxxxxxxxx
0040: 6e 6e 69 73 40 45 55 52   xxx@xxx
0048: 4f 43 48 41 52 54 49 4b   xxxxxxxx
0050: 49 2e 47 52               I.GR
All the errors come ONLY FROM 1 USER.
How can i fix this errors?
If you require any further information do not
hesitate to let me know
Thanks and regards.

You must ask in Exchange forum
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver

SSPI handshake failed with error code 0x8009030c and Login failed for user''

I got the following error when tried to connect to local machine in the
non-domain environment with Windows Authentication by SSMS.
"SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security."
"Login failed for user''. the user is nothing associated with a trusted SQL server connection."
questions
1,if I saw the "SSPI handshake failed ", does it means it must used Kerberos but failed? or it is also possible used the NTLM but failed?
2,Any ideas for this issue?
Please click the Mark as Answer button if a post solves your problem!

Hi Michael,
Firstly, "SSPI Handshake Failed" error happens usually when connection failed between the server and domain controllers or failed Kerberos authentication. For more details about "SSPI Handshake Failed" error, please review this
FAQ.
Secondly, regarding to your error message, it could be caused by loopback check. To resolve the issue, please set the DisableLoopbackCheck registry entry to 1 by performing the following steps.
1.Click Start, click Run, type regedit, and then click OK.
2.Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
3.Right-click Lsa, point to New, and then click DWORD Value.
4.Type DisableLoopbackCheck, and then press ENTER.
5.Right-click DisableLoopbackCheck, and then click Modify.
6.In the Value data box, type 1, and then click OK.
7.Exit Registry Editor.
8.Restart the computer.
There is a similar blog about your scenario for your reference.
http://www.bhcblog.com/2009/10/08/fix-for-login-failed-for-user-the-user-is-not-associated-with-a-trusted-sql-server-connection/
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

I am trying to install CS6 Design and Web Premium trial and it fails with error code 20

I am trying to install CS6 Design and Web Premium trial and it fails with error code 20

Re-extract or copy the contents of the installer. Let us know if this helps.
See http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html

PSE12 download keeps failing with error codes DF006 and DF016. [was:Question]

I have purchased elements 12 for my Macbook pro but the download keeps failing with error codes DF006 and DF016.
What can I do?

Is there an Exit Code indication that precedes the DF indications? If so, try searching this forum using that "Exit Code #" substituting the number for #

CPU12.1.0.2.3 opatchauto failed with error code 255.

I am installing critical patch update 12.1.0.2.3 (15-APR-2015) for Grid Infrastructure standalone on Linux. It fails with the subject error code and the following additional messages:,
The user is root. OPatch cannot continue if the user is root.
opatchauto failed with error code 255.
The instructions specifically tell me to login as root before installing the patch, so what's up?
The instructions say to first upgrade OPatch to the latest, which I have done and verified.
Second, an OCM Response File is mandatory, so I followed the steps to create this file and saved it as /home/grid/ocm.rsp with default permissions 644.
Third, the instructions say to download the patch and unzip it to an empty location that cannot be /tmp. I created a new directory /home/grid/foo and unzipped the software to that location. So, the unzip location is /home/grid/foo/ and in that directory are only two things: a file named PatchSearch.xml and a directory named 20485724.
Fourth, the readme says the patch must be installed by a user with root privileges, so I have logged in as root. (Oracle Note 1591616.1 says you must login as root, not just be root like).
As root I have set environment variable for ORACLE_HOME pointing to the GI Home, and I set PATH=$PATH:$ORACLE_HOME/bin:$ORACLE_HOME/OPatch.
Finally, I invoke opatchauto with the required parameters and it throws an error saying I cannot be root. I fussed with the parameters and the result is always I cannot be root.
From the documentation,
Case 3: Patching GI Home Alone
You should use the following instructions if you prefer to patch Oracle GI (Grid Infrastructure) home alone with this patch.
Case 3.1: Non-Shared GI Home
If the GI home is not shared then use the following instructions to patch the home.
Case 3.1.1: ACFS File System Is Not Configured
Follow these instructions in this section if the GI home is not shared and none of the Oracle database homes use ACFS file system for its software files.
Execute the following on each node of the cluster.
As root user execute:
# opatchauto apply <UNZIPPED_PATCH_LOCATION>/%BUGNO% -oh <GI_HOME> -ocmrf <ocm response file>
My command is,
opatchauto apply /home/grid/foo/20485724 -oh /u01/app/12.1.0.2/grid -ocmrf /home/grid/ocm.rsp
So, not a syntax problem. It simply won't let me run it as root despite that being a hard requirement.

Hello,
I tried with above command and faced the a different error . I tried applying patch 4487801.
ApplySession applying interim patch '4487801' to OH <Oracle_Home>
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplica
bleProduct" failed.
The details are:
OPatch found incompatible or invalid applicable product type with respect to the
Oracle Home.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 74
I doubt if some other patches to be applied before this one.if yes, then from where we can get the list of pre requite patches.
Please guide.

OPatch failed with error code 74

- What can I do to fix this error when applying an Oracle patch for 10.2.0..2 on HP-UX B11.11 64 Bits.
- I get this error when applying all patches.
This is the screen shot.
dr3dvqa:orau3d 103> cd /oracle/stage/102_64/patches/5063279; opatch apply -force
Invoking OPatch 10.2.0.2.5
Oracle Interim Patch Installer version 10.2.0.2.5
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/U3D/102_64
Central Inventory : /oracle/oraInventoryU3D
   from           : /var/opt/oracle/oraInst.loc
OPatch version    : 10.2.0.2.5
OUI version       : 10.2.0.2.0
OUI location      : /oracle/U3D/102_64/oui
Log file location : /oracle/U3D/102_64/cfgtoollogs/opatch/opatch2008-03-04_16-08-50PM.log
ApplySession applying interim patch '5063279' to OH '/oracle/U3D/102_64'
Interim patch 5063279 is a superset of the patch(es) [ 5063279 ] in OH /oracle/U3D/102_64
OPatch will rollback the subset patches and apply the given patch.
Running prerequisite checks...
Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
The details are:
Patch 5063279:
Archive Action: Source file "/oracle/U3D/102_64/.patch_storage/5063279_Nov_28_2006_04_15_32/files/lib/libserver10.a/kdibl.o" does not exist.
'oracle.rdbms, 10.2.0.2.0': Cannot update file '/oracle/U3D/102_64/lib/libserver10.a' with '/kdibl.o'
ApplySession failed during prerequisite checks: Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 5063279 is a superset of the patch(es) [ 5063279 ] in OH /oracle/U3D/102_64
OPatch failed with error code 74

The log file
/oracle/U3D/102_64/cfgtoollogs/opatch/opatch2008-03-04_16-08-50PM.log
has this ...
SEVERE:OPatch invoked as follows: 'apply -force '
INFO:
Oracle Home       : /oracle/U3D/102_64
Central Inventory : /oracle/oraInventoryU3D
   from           : /var/opt/oracle/oraInst.loc
OPatch version    : 10.2.0.2.5
OUI version       : 10.2.0.2.0
OUI location      : /oracle/U3D/102_64/oui
Log file location : /oracle/U3D/102_64/cfgtoollogs/opatch/opatch2008-03-04_16-08-50PM.log
INFO:Starting ApplySession at Tue Mar 04 16:08:51 GMT-07:00 2008
INFO:Starting Apply Session at Tue Mar 04 16:08:51 GMT-07:00 2008
INFO:ApplySession applying interim patch '5063279' to OH '/oracle/U3D/102_64'
INFO:Starting to apply patch to local system at Tue Mar 04 16:08:51 GMT-07:00 2008
INFO:Start the Apply initScript at Tue Mar 04 16:08:51 GMT-07:00 2008
INFO:Finish the Apply initScript at Tue Mar 04 16:08:51 GMT-07:00 2008
INFO:Patch 5063279 is superset of 5063279
INFO:Patch 5063279 has no conflicts/superset wiht any other patch processed till now
INFO:Checking conflicts for patch: 5063279
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5063279
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4518443
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4271217
INFO:Checking conflicts/supersets for patch: 5063279 with patch:3748430
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6771608
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5746835
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6740811
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5632264
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5499655
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5390946
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4704890
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6729801
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6663258
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6455795
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6447320
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6435823
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6340979
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6153847
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6046043
INFO:Checking conflicts/supersets for patch: 5063279 with patch:6005996
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5495639
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5099992
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5941030
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5308692
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5762514
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5636728
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5635254
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5618049
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5581518
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5530958
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5442919
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5377099
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5369855
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5103126
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5063279
INFO:Patch 5063279 is Superset of 5063279
INFO:Checking conflicts/supersets for patch: 5063279 with patch:5052029
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4952782
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4883635
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4864648
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4773931
INFO:Checking conflicts/supersets for patch: 5063279 with patch:4668719
WARNING:OUI-67078:Interim patch 5063279 is a superset of the patch(es) [ 5063279 ] in OH /oracle/U3D/102_64
INFO:OPatch will rollback the subset patches and apply the given patch.
INFO:
Running prerequisite checks...
INFO:Space Needed : 657540
INFO:Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 5063279
INFO:Start fuser command /usr/sbin/fuser /oracle/U3D/102_64/bin/oracle at Tue Mar 04 16:08:55 GMT-07:00 2008
INFO:Finish fuser command /usr/sbin/fuser /oracle/U3D/102_64/bin/oracle at Tue Mar 04 16:08:55 GMT-07:00 2008
INFO:
Patch 5063279:
Archive Action: Source file "/oracle/U3D/102_64/.patch_storage/5063279_Nov_28_2006_04_15_32/files/lib/libserver10.a/kdibl.o" does not exist.
'oracle.rdbms, 10.2.0.2.0': Cannot update file '/oracle/U3D/102_64/lib/libserver10.a' with '/kdibl.o'
INFO:Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
The details are:
Patch 5063279:
Archive Action: Source file "/oracle/U3D/102_64/.patch_storage/5063279_Nov_28_2006_04_15_32/files/lib/libserver10.a/kdibl.o" does not exist.
'oracle.rdbms, 10.2.0.2.0': Cannot update file '/oracle/U3D/102_64/lib/libserver10.a' with '/kdibl.o'
SEVERE:OUI-67074:ApplySession failed during prerequisite checks: Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
INFO:System intact, OPatch will not attempt to restore the system
INFO:----
INFO:The following warnings have occurred during OPatch execution:
INFO:1) OUI-67078:Interim patch 5063279 is a superset of the patch(es) [ 5063279 ] in OH /oracle/U3D/102_64
INFO:----
INFO:Finishing ApplySession at Tue Mar 04 16:08:55 GMT-07:00 2008
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Tue Mar 04 16:08:55 GMT-07:00 2008
INFO:Stack Description: oracle.opatch.PrereqFailedException: Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
INFO:StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:3635)
INFO:StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3529)
INFO:StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5238)
INFO:StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1544)
INFO:StackTrace: oracle.opatch.OPatch.main(OPatch.java:570)
INFO:File "/oracle/U3D/102_64/.patch_storage/patch_unzip" cannot be deleted as it does not exist

Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggest

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

SCCM 2012 CU2 OSD forest trust: ReleaseRequest failed with error code 0x87d00317

Hello,
Actually i have a difficult Problem with my SCCM 2012 R2 CU2 Windows 7 x64 SP1 Tasksequence:
I get the folowing error in smsts.log:
::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,811) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
GetTsRegValue() is unsuccessful. 0x80070002. TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
End program: TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Finalize logging request ignored from process 1736 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Waiting for CcmExec service to be fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
CcmExec service is up and fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Access handle will be read from _SMSTSActiveRequestHandle TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Access handle: {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Attempting to release request using {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
CoCreateInstance succeeded TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=87d00317 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
ReleaseRequest failed with error code 0x87d00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Task Sequence Manager could not release active TS request. code 87D00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Here is the complete smsts.log: http://1drv.ms/1pwTEBf
To explain the Problem in Detail:
The SCCM Primary Site Server and the Clients are in different trusted (bidirectional) forests!
Everythings working fine in this Scenario, I can install SCCM Agent on the Clients with Manual ccmsetup and with Client Push Installation. Additionally i can deploy Software Updates and so on... only OSD is crashing in the releaserequest step.
During my Tasksequence new Clients are joined to Domain A while SCCM Primary Site Server is installed in Domain B
If I change my TS and let the Clients also join Domain B everything works without any Problems and the Tasksequence finish without any Errors.
My Problem must be related to the different Domains and the forest trust.
My Setup:
MP published to DNS in both domains
Schema Extended in both domains
System Management Container published and verified in both domains
ccmsetup Parameters in TS: ccmsetup SMSMP=sccm.domain.b FSP=sccm.domain.b DNSSUFFIX=Domain.b
Network Access account configured with Domain B account
Domain Join account has create Computer rights on the OU in Domain A (Domain join is successful)
DNs conditional forwarders configured in both Domains and DNS resolutin is working in both directions
Any suggestions?
Many thanks.
regards,
Christian

Hi Christian,
So do you actual get an error message in your TS or is it just failing to join Domain B? (Could be both if the machines fails to join the domain).
Can you review netsetup.log on the machines after the issue and see what error message you might be getting during the domain join process?
Also, if it a domain join issue, can you try manually joining to domain B using the same service account?

OPatch failed with error code=74check "CheckSystemSpace" failed on 11.1.0.7

Hi , I am trying to install CPU patch on oracle 11.1.0.7 on windows 32 OS , Stopped listner, and stopped services and on applying - opatch apply
I get the following error...i currently have 1.25 GB on Oracle_home Drive which is E drive. How much space do i need to increase? Is that space shortage it is complaining? Needed to clarify with you gurus. I even ched with %ORACLE_HOME%/OPatch/opatch lsinventory and it showed opatch succeeded. Please advise. Thanks a bunch.
ApplySession applying interim patch '13460955' to OH 'E:\app\oracle\product\11.1.0\db_1'
Interim patch 13460955 is a superset of the patch(es) [ 12914915 ] in OH E:\app\oracle\product\11.1.0\db_1
OPatch will rollback the subset patches and apply the given patch.
Running prerequisite checks...
Prerequisite check "CheckSystemSpace" failed.
The details are:
Required amount of space(1598496302) is not available.
ApplySession failed during prerequisite checks: Prerequisite check "CheckSystemSpace" failed.
System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 13460955 is a superset of the patch(es) [ 12914915 ] in OH E:\app\oracle\product\11.1.0\db_1
OPatch failed with error code = 74

Hi,
Prerequisite check "CheckSystemSpace" failed.
The details are:
Required amount of space(1598496302) is not available.I belive error message soo clear isnt it?
Please see:
OPatch Troubleshooting/FAQ Guide for Oracle Database Machine [ID 1265683.1]
OPATCH CheckSystemSpace Failed with Error Code 73 while Applying GI PSU [ID 1088455.1]
Regard
Helios

IPad2 update to iOS5 failed and restore fails with error code (6)

Similar Messages

Maybe you are looking for