IPad2 using iOs 8 passcode problem

I updated my iPad2 to iOs 8.02 and now I am having a problem. It crashed and I got a message that it needed to be restored on iTunes. I did and now I can't get into it again because it says that I am using the incorrect passcode. I have tried so many times that now I have to wait 60 minutes to try again as it is disabled. I have tried to restore again but it will not allow me too because I can't get into the settings to turn off "Find my iPad". I went onto iCloud to erase all the data as that was another suggestion (I have it backed up) but it won't erase until it connects to the internet and I can't connect it until I know the passcode! I followed all instructions in the support documents but to no avail. It's useless at this point....any suggestions?

If you are positive that you followed all of the steps in that support article that I posted in my first response, you need to sign into her Apple ID in Settings>iTunes and App Store>Apple ID. If your ID is still showing in there, tap it and sign out. Then sign in with her ID. If you didn't follow all of the steps in the link, you may still have to remove the device from iCloud/sign out of iCloud and that is why it is still looking for your Apple ID.
IF you are trying to update apps that you bought with your ID, you cannot use her Apple ID in order to do so. Those apps (and any other purchases made with your Apple ID) will always be tied to your ID.
You might want to take a look at the support article again just to be sure you followed all of the steps.

Similar Messages

I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father's Ipad2 last night.software is the same my Ipad2's IOS 5.0.1 (9A405), to my surprise it worked properly.

Hi! My name is Nazım . I live in North Cyprus. I’ve got Apple Ipad 2 and Iphone 4. My ıpad2 is iPad 2 Wi-Fi + 3G: Serial number: DQTFFVC1DFJ3., IOS 5.0.1 (9A405), model MC775LL .my itunes is last version. I bought my ipad from America.
I’ve recently bought Philips DC390 from Apple Store in Oxford Street. Althouh Philips dock 1 seemed to work properly (charged and player). The second dock isnot compatible with my ipad2. It didn’t work(play),It charges though.
I sended e-mailed to Philips.uk for assistance. They recomend met o reset my ipad2 to see if this clears any issue, but it does indicate a fault with the unit. It didn’t work either.s(everal time Ireset my Ipad2)
In addition to this, I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father’s Ipad2 last night.software is the same my Ipad2’s IOS 5.0.1 (9A405), to my surprise it worked properly. I’ve already reset my ipad2 several times but it didn’work.
I would be grateful if you could make me some recommendations to sort out the refered my problem.

Hi Nazim
This is a user to user group. There is no-one from Apple here.
Use this link to contact Apple directly.

Problem to upgrade my Ipad2 to IOS 7.0.2.

I tried to upgrad my Ipad2 to IOS 7.0.2. this weekend without success. When the Ipad had been downloading the software via WiFi for a while it asked me to connect to Itunes which I did. After "extracting software" in Itunes for a while I get the error message (9) on my computer. I have also tried to restart the Ipad by pressing the two buttons but the Ipad only comes back to the same screen asking for connection to Itunes. Anyone having the same problem and any tips for a solution?

Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Ipad2 with iOS 8.1: never ending problems!

I was so happy with my iPad2 (and iOS 7 software!)... The new firmware (iOS 8.1) fixed the WiFi connections problems (unexpected shotdown). Now there are lots of other problems with the keyboard: for example in the vertical mode I can't use some letters/functions (like "A", backspace, ecc.), in the orizontal one I can't use others... I'm spending my time on the iPad2 rotating the device. Do you have any answer? Thanks!

Hi The best solution is to Reset back to Factory Settings this will get rid of any bugs And make ipad run better. A good buy now is iPad Air 1 that came out last Christmas was £479 now £359 for 32G Cheers Brian

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

Restart your WiFi router and printer by removing power for 30 seconds.

I updated my IPAD 's IOS last night ...I have NEVER used a passcode for my IPAD & it is asking for it...How am I supposed to put in the passcode that I NEVER used? now I cannot even use my IPAD...HELP!!

I updated my Ipad( ios 7.1) & now it is asking for my PASSCODE ...I NEVER used a PASSCODE ,so now I am unable to use my IPAD because I DO NOT or NEVER have used a passcode ..my IPAD is useless ..I am locked out because I have NO passcode to use! HELP!!!

I have seen other users talk about this and make the same claim. Unfortunately, even if you didn't set a passcode, and the iPad is insisting that you did, unless you can successfully guess what the passcode is, you still have to follow these instructions and use one of the methods in here in order to restore your iPad which will then unlock it.
iOS: Forgotten passcode or device disabled after entering ...

Previously i use ios 4 version 4.2.1 then i updated to 4.3.3 the problem is my network coverage sometimes not in service or no network?now i update to ios 5 its still happend?can advice me..

Previously i use ios 4 version 4.2.1 then i updated to 4.3.3 the problem is my network coverage sometimes not in service or no network?now i update to ios 5 its still happend?can advice me..

Scroll down and see the "Update Your Device Using iTunes" section here:
HT4623
There is no "update icon" in iOS versions earlier than iOS 5.
The update is very large (over 1.2 gigabytes). You need a good internet connection to download it to your computer. Maybe you'll need to take a trip to a city to get a good enough connection.

IPad2 with iOS 6 and it changed my passcode. Why?

I just updated my iPad2 with iOS 6 and it changed my passcode. What gives and why did it do that? It has locked me out with no way to shut it down. Any ideas?

iOS 6 did not change your passcode.
If you have forgotten the passcode then you will need to restore your iPad from the same computer that you most recently synced to.
Read this: http://support.apple.com/kb/ht1212
If you can't do the restore then you will need to try recovery mode.
Read this: http://support.apple.com/kb/ht4097

I am using IOS 5 on iPad2. I am wondering why couldn't I edit the data in my contacts and calendar data?

I am using IOS 5 on iPad2. I am wondering why couldn't I edit the data in my contacts and calendar data?

Movies are not stored in your iCloud account unless you add them in the theater feature of iMovie version 10.

HT4623 Problems using ios 7 on iPad 2

I have problems using ios 7 on my iPad 2:
1) Apps are crashing (Safari, Apps that show text) after I select a text and the magnifiying glass appears.
2) heavy apps (Dungeon Hunter 4, Robocop) are crashing unexpectedly.
How can I a fix for this problems?

First, try rebooting:
Rebooting your iDevice
Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The iPad should begin to start up.
If that doesn't help, then delete the third-party apps and then redownload them.

I am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported in this device", but phone is charging, before switched to ios7 it was ok.

i am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported on this device", but phone is charging, before switched to ios7 it was ok, i am getting this notification each time i am connect my phone for charging, or laptop, why i am getting this?

I am not using extra cable for charging the phone or sync to pc, one cable which came with the phone.it was a full intact box. Which i use for charging my phone and also i am using that cable for sync to my pc, when i was using ios 6.1.4 at that time that notification didnt shown up in my phone,it was ok, when i switched to ios7, i have started getting this notification, my friends are also using i4, i4s, and i5, they are also updated to ios7, but they are not getting the notification which i am getting in my phone after connecting my phone with the cable, so what is the solution? It will be very helpful for me if you give me any plz...

The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem.

The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Problem with iphone 4,my phone still using ios 5 operating system and now it wont work ad tried to update it

Help!!! My iphone is still using ios 5 operating system due to laptop issues and unvarnished able to update it,my husband has tried to update it and now its saying phone in recovery! If I restore to original settings will i loose everything like music and photos??!!!!!

Hi there Laura,
Welcome to Apple Support Communities.
It sounds like your iPhone is in recovery mode and you’re concerned about restoring it to factory settings because you don’t want to lose any data. The first article linked below provides a lot of great information about restoring an iOS devices to factory settings, including how to restore from any backups that you may have created with iTunes.
Use iTunes to restore your iOS device to factory settings - Apple Support
Also, if you want more information about recovery mode, take a look at the article linked below.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Cheers,
-Jason

I downloaded the new os7 on my Ipad mini. Now in order to use the ipad I need to use a passcode. I cannot get pass the login screen and I never set up my ipad to use a passcode. What can I do?

I downloaded the new os7 on my ipad mini. Now in order to use the Ipad, I need to enter a passcode. I cannot get pass this screen. I did
not set it up to use a passcode. What can I do? I am not too computer savy.

I have the same problem. I upgraded to iOS7, entered my usual passcode when prompted in setup, and when I tried to access my iPad after installation was finished it denied my passcode. I can't connect to any internet to erase it or anything because the new iOS hasn't yet been configured to a wifi network, so I can't backup from anything either.
When I connect the iPad to iTunes, it tells me that Find My iPad must be disabled on my iPad before backup or restore can continue - and I can't access anything beyond the lock screen of my iPad at all because it refuses to accept my passcode, so I can't get to Find My iPad.

IPad2 using iOs 8 passcode problem

Similar Messages

Maybe you are looking for