Ipad2 wakes up to a blank screen after iOS5 upgrade

I have noticed two peculiar issues after iOS5 upgrade. My ipad2 screen awakens to a blank black screen after password input; this only happens when an app or a program was open when it locks. I have to close and reopen the cover and reenter password to get to the usual screen.
Additionally I have noticed the icons for several of my iapps become invisible, the name of the icon is visible and the app/program opens up if I click on the name
any suggestions?
thx

I had a similar thing on an old MacBook Pro where if I closed the lid, then reopened it before the sleep cycle took over, it would have a blank screen. I had to close the lid until the power light pulsed, then it would wake normally.
Any similarities?

Similar Messages

Blank screen after software upgrade

My iMac downloaded a software update yesterday and restarted automatically. But when it rebooted, I have a white/grey blank screen and the system dies not boot up. After a while, I did a hard shutdown. I let it sit a while, and when I restarted it, I have same thing!! Any ideas?!? Please help!!

I think I found the problem. When I went to apple support to check and see if I could get technical support, an option came up with options, and this was one of them. They said it could be an external device causing the blank screen. They said to unplug all other external devices and then to reboot again to see if that fixed the problem. It worked. I have been having issues with my Western Digital external drive, and I think that was it. I am returning the drive for an exchange and I hope that this issue will not happen again. Thanks again for your help!

IPad2 3G does not recgonize SIM card after ios5 upgrade.

Recenlty upgraded to ios5 on my iPad2 Wifi + 3G. Was working perfectly until the ios5 upgrade. After the upgrade, it no longer recognizes the sim card.
Tried all the following things, but no success -
1. Rebooted the ipad2
2. Replaced with new SIM
3. Did a system restore of the iPad
Contine to get the following message on start up :
No SIM card installed!
Also, top left hand corner shows No SIM instead of 3G.
When I go to the Settings page, Cellular Data section is disabled.
By the way, tried the same SIM card on another iPad which had not upgraded to ios5 and the SIM card worked fine.
Pls help. Really frustrated right now with this ios5 upgrade.
Chetanovsky

Finally found the solution. New iPad!. The apple authorised service Center replaced my iPad with a new one. Not many questions asked! New one is preloaded with iOS5 and recognizes my SIM card.
Recommend people to do the same (i.e. get a replacement) if you have the same problem as mine. Do remember to backup your stuff before sending in your iPad to the service Center.

Blank screen after CPU upgrade for CQ60-119 series

Hi all.
The model:
I recently decide to upgrade my Compaq Presario CQ60-119TU purchased in 2008.
The upgrades:
My son will use it to play some games on it. Yes I know - it only has an integrated 4500M graphics chip - but this should be fine for Spore.
Apart from changing from 2 to 4Gb of Ram I will swap out the 250Gb to a 640Gb hard drive.The CPU is also being swapped out.
Existing CPU: Intel Celeron T1600 (1M Cache, 1.66 GHz, 667 MHz FSB)
Replacement CPU: Intel Core 2 Duo T9600 (6M Cache, 2.80 GHz, 1066 MHz FSB)
The laptop manual states this CPU as the best spec'ed replacement CPU I can put in the laptop.
Prior to this I upgraded to the lated bios which is F.65. All was working well with the T1600 at this time.
Problem:
After replacing the CPU and pressing the power button the laptop boots up briefly for a couple of seconds and then powers off for a couple of seconds. It reboots and stays on (CPU fan is running) but there is nothing on the screen at any time.
If I replace the old CPU and the machine boots up with the screen displaying text so video appears not to be the issue (well ...not broken at least)
Any suggestions on how to get this CPU to work or is the CPU defective? Thanks in advance.

Have a look here and you'll see that having the wrong mobo northbridge chipset (not compatible with the FSB of the processor) will cause the T9600 not to work. If you have the GL40 chipset forget trying to get this processor to work with your existing motherboard. If you have the GM45 chipset then your issue is probably something else.
Don't know what your chipset is? Download the free utiliy CPU-Z and run it.
FYI - The same model motherboard with the GM45 chipset is a 485219-001.

Blank Screen after 703HP3 (Linux)

Hi,
after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
HP703HP3 I got a blank screen after starting the machine.
All logs look got but I can't login in. Only a blank web page. No login. No
picture. Nothing.
Any idea?
Have anybody the same problem?
I went back to my snapshot. So my user can login.
Now I will try it at another server.
Andreas

Hi Massimo,
the login web page for webaccess for the user...
Andreas
"Massimo Rosen" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
> Hi,
>
> Andreas Schild wrote:
>>
>> Hi,
>>
>> after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
>> HP703HP3 I got a blank screen after starting the machine.
>
> What do you mean "a blank screen"? A blank screen where?
>
>> All logs look got but I can't login in. Only a blank web page. No login.
>> No
>> picture. Nothing.
>
> I'm sorry, but it's totally unclear what you're talking about. What web
> page?
>
> CU,
> --
> Massimo Rosen
> Novell Product Support Forum Sysop
> No emails please!
> http://www.cfc-it.de

Blank Screen after Hibernate

Hi,
On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
I've got the latest drivers according to the HP driver update utility.
Anyone with the same problem or have a solutions?
Thanks,
Dean.

Hi,
On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
I've got the latest drivers according to the HP driver update utility.
Anyone with the same problem or have a solutions?
Thanks,
Dean.

Laptop only coming up with a blank screen after set-up?

Ok, so. My parents bought me a brand new hp laptop for christmas. On christmas day i went through the whole set-up process and did all the steps it told me to do. When i'd been through all the steps, i got a loading symbol and ever since, all it comes up with is a blank, black screen and a mouse icon that i can move. I'm not 100% sure of the model though (appologies). What do i need to do??
Cheers

Hello @15_,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook is coming up with a blank screen after setting it up. Is the power on the computer on? Is there an error message on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Bootcamp goes blank screen after startup sign.

I'm unable to start up my bootcamp. It just goes blank screen after the startup moving icon and stays blank screen. Can anyone help? Thank you in advance!!!

@MT1
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Blank screen after login in SAP CRM 2007

hi,
we are experienceing blank screen after we login to crm2007 web client.
what we have done
- implemented sap note 168941, 612670, 1045941, 1144511
- assign PFCG role to business role
is there any other step we missed?
Thanks.

Hi friend,
Please, check if in your pfcg profile you have the objects:
uiu_comp
CRMCONFMOD
with value *
Regards,
Lalas

SAP BPC 10.0 Web Client Blank Screen after login

Hi ALL,
We are using SAP BPC 10.0 Web Client with Adobe Flash Player 13.0.0.214 with IE 9.0 on Windows 7.0.
We face strange error where on only on certain PC, the BPC web client working.. On other getting Blank/Blank Screen after login (with "movie not loaded" on the adobe flash player).. Both PCs are having the same setting.
Even one of PC which previously working, starting this week suddenly getting the same error.. I have created OSS message and got feedback with also share this problem on this forum.
I have done several actions as mentioned on several SAP notes )1624267, 1664889, 1681147, 1694871, 1752971, 1798336, 1804221, 1806371, 1811218, 1820505, 1918631, 1968584), but still no luck..
If you have the same issue, kindly share..
Thanks and regards,
Hery

Yes .. Compatibility View also checked.. in several PCs, it is working well. both failed and working PCs have the same setting.
Just found another weird: in one working PC, 2 different windows local-admin users login to the same PC for BPC-web and getting different result (1 Ok ; 1 failed) ..seems it is related with the user profile and login-domain servers (we have multiple login-domain servers with load balancing mechanism).
Thanks and regards,
Hery

3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

I took the iPod to the local Apple shop. The guy put the iPod onto a docking station and checked it - answer "connections are OK". I have used the link before but have not gone through all its suggestions (although picked on the most relevant ones). I may have to go back. Thanks again for your suggestions

Blank screen after setting back to Factory Default Setup

After setting an HP Pavillion laptop with Windows XP back to the default factory setup, I get nothing but a blank screen after turning the laptop on. The HP screen doesn't appear, there is just a blank screen.

I have also gotten the blank, black screen, after using the Recovery CD's from HP on THREE different computers, please, if anyone knows how to help, HELP. I get nothing, tried hard off, new memory, new hard drives, no battery, battery, new battery, new a/c adapter, etc. Only one is still under warrenty, a HDX-16t, the other two, an HDX 16 and a Pavilion -1135nr

PC fails to reboot and shows blank screen after automatic windows updates including SP

Pavilion- a1130n" WINXP ProfessionalC fails to reboot and shows blank screen after automatic install ing windows updates including SP 3

I would love to say that a refresh worked for me however it did not.It takes about 30 Minutes total I was able to trace part of the issue to a Registry Key that was tagging the processor. Because my BIOS manages its own temp gauge and windows is trying to
build on in I had to turn the BIOS one off as well as for some reason I get better funtionality with Visualization off.
I am still dealing with a lag but I was able to get ride of the freeze that made the computer completely useless.

My Macbook Air wakes up with a blank screen. Why do I have to shut down and start up to wake it up?

I use Mountain Lion on a macbook Air. When it goes to sleep it wakes up with a blank screen, I have to shut down and start up again to wake it up. Can anyone help?

I had a similar thing on an old MacBook Pro where if I closed the lid, then reopened it before the sleep cycle took over, it would have a blank screen. I had to close the lid until the power light pulsed, then it would wake normally.
Any similarities?

Blank screen after KitKat update

I just completed the KitKat update on an Ellipsis 7 tablet that's connected to Verizon's network, but now I'm only getting a blank screen after the welcome screen displays. Fyi: the first part of this update went smoothly. Can anyone can help me resolve this issue? I really like this tablet and use it everyday.

I contacted Verizon support and a couple of techs attempted to walk me through alternate boot methods. However, as bassclarinetl2 noted, "pressing the power button to turn the device off results in the device powering up by itself and both 'safe mode' and 'factory reset' are inaccessible via their button combinations." Therefore, I'm sending my tablet in to be repaired or replaced under warranty. Depending on how long you've had your Ellipsis 7 tablet, you may be able to do the same.
Incidentally, I have another (seemingly) identical Ellipsis 7 tablet and was able to successfully install the KitKat upgrade on this second tablet, which I'm using now. The sooner Verizon determines why the upgrade worked on one tablet and not the other, the better.

Ipad2 wakes up to a blank screen after iOS5 upgrade

Similar Messages

Maybe you are looking for