Ipad2 when I tap safari it is just a white screen

I tried a reset...deleted history etc....still white screen for safari

I just explained it above but here it is again.
Go to the page that you want to use as a home page - any web site that you want to use. Navigate to that site in Safari. While you are on that web site - tap the Arrow icon in the Safari toolbar - to the left of the URL field at the top. The white area in which you type the website address is the URL field - the arrow icon is to the left of that. When you tap on that icon - you can select - add to Home Screen from the pop up menu. Tap on that. When you do that, it will put a Safari shortcut icon onto your home page.
Then from now on you can tap on that shortcut icon - that you just created - on the home screen of the iPad - and that will open Safari to that "homepage" that you selected.

Similar Messages

  • When I tap safari, I get a completely white page.  Pages take forever to load, even with strong wifi.  Any ideas?

    When I tap safari, I get a completely white page.  Pages take forever to load, even with strong wifi.  Any ideas?

    you may have a strong wifi signal but what kind of speed are you getting,
    are you able to connect to wifi and see if it goes any faster then?
    it might just be that the cellular data connection is slow

  • When I open safari I get a blank white screen.

    When I open safari I get a blank white screen. When I open top sites, and choose google, the screen is still blank, with the search bar at the top a quarter full. If it does open, it suddenly becomes unresponsive and returns to that blank, white screen. I'v tried everything I can think of, but nothing works.
    On a side note, everything from mail to iphoto to word works - just not safari. I'm using a mid-11 iMac 21.5"i5 running on mountain lion.
    Also did I post this in the right place? I'm new to this.

    Read this whole message before doing anything.
    Back up all data.
    Quit Safari if it’s running. Then select
     ▹ Force Quit…
    from the menu bar. A small window will open with a list of running applications. Safari may appear in that list, even though you quit it. If so, select it and press return. Close the window.
    Step 1
    In the Finder, press the key combination shift-command-A to open the Applications folder. Select the Safari icon in that folder and press the key combination command-I to open the Info window. There’s a checkbox in the Info window labeled Open in 32-bit mode. Uncheck it, if checked. Close the Info window and the Applications folder.
    If Adobe Flash Player is installed, select
     ▹ System Preferences ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.
    Hold down the option key and select
    Go ▹ Library
    from the Finder menu bar. Delete the following items from the Library folder (some may not exist):
    Caches/com.apple.Safari
    Caches/com.apple.WebKit.PluginProcess
    Caches/Metadata/Safari
    Preferences/com.apple.WebKit.PluginHost.plist
    Preferences/com.apple.WebKit.PluginProcess.plist
    Saved Application State/com.apple.Safari.savedState
    Leave the Library folder open. Try Safari again. If it works now, stop here. Close the Library folder. If you still have problems, continue.
    Step 2
    Triple-click anywhere in the line below to select it:
    open $TMPDIR../C
    Copy the selected text to the Clipboard (command-C).
    Quit Safari again. Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). A folder should open. If there's a subfolder with the name "com.apple.Safari", delete it, even if it's empty. Quit Terminal. Close the folder. Launch Safari and test.
    Step 3
    If Safari still doesn’t work right, quit, go back to the Finder and move the following items from the open Library folder to the Desktop (some may not exist):
    Cookies/Cookies.binarycookies
    Internet Plug-Ins
    Preferences/com.apple.Safari.LSSharedFileList.plist
    Preferences/com.apple.Safari.plist
    Preferences/com.apple.Safari.RSS.plist
    Preferences/com.apple.WebFoundation.plist
    PubSub/Database
    Safari
    (Note: you are not moving the Safari application. You’re moving a folder named “Safari.”)
    Try again. This time Safari should perform normally, but your settings and bookmarks will be lost. The default set of bookmarks will be restored. Delete them all.
    If the issue is still not resolved, quit Safari again and put all the items you moved to the Desktop back where they were, overwriting the newer ones that may have been created in their place. You don’t need to replace the files you deleted in step 1. Stop here and post again.
    If Safari is now working normally (apart from the lost settings), look inside the “Safari” folder on the Desktop for a file named “Bookmarks.plist”. Select
    File ▹ Import Bookmarks
    from the Safari menu bar. Import from that file. Recreate the rest of your Safari settings. You can then delete the items you moved to the Desktop.
    Note: This step will remove your Safari Extensions, if any, and their settings. If you choose to restore them, do so one at a time, testing after each step to make sure you haven’t restored the problem.
    If you don’t like the results of step 3, you can undo it completely by quitting Safari and restoring the items you moved or deleted in that step from your backup, overwriting any that were created in their place.

  • Hello i am having issues and it is quite irritating my ipod touch 2g will not turn on and when it finally did it was just a white screen and it asked if i wanted to restore to factory defaults so i did so. it didnt do anything it was still just a white sc

    hello i am having issues and it is quite annoying i just want to you use  my ipod again. ok so one day when i went to use it it wouldnt turn on actually it wouldnt do anything i tried everything it wouldnt connect to the computer or even show up it wouldnt charge i mean nothin. so then the other day i figued hey ill try plugging it in again and it started up and the screen was white no apple logo just a white screen then i connected to the computer ahah soo i restored it to factory settings well then it still was a white screen and then it shut off and will not turn on again no matter what i do. any advice would help. thanks

    My IPOD is also dead this evening afte trying to install the 2.2.1 update, I have a blank screen and no response from IPOD (Screen is blank)
    I have also the USB Device Not Recognised message, I have tried holding the power and home buttons down for prolonged period, this provokes a response from the PC ie another USB device not recognised message but nothing on screen.
    I have also ITUNES open hoping it would pick up the device and suggest reset or reinstallation / restore, but nothing !!! Help, any apple support folk on here ?
    What should I do next ?
    Frustrated
    Adam

  • HT4097 I'm having problems updating my apps, when I press updates, it's just a white screen, but when I push the featured or genius buttons, apps appear, what can I do?

    I'm having problems updating my apps, the screen just stays white....

    Read this on iLounge posted by ahMEmon
    Go into Settings > General > International > Language and choose British English, then hit the Done button. The screen will go black with a comment about Language Settings. Be Patient, especially if you have a lot of apps. Let it run it's course and Then open the App Store again. Voila! Upgrade list is back. And it stuck when i changed back to plain English. He doesn't know why. I don't either. But I am now a happy camper. Worked on my 3rd gen iPad and iPad Mini.
    Hope it works for you!

  • When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

    When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • On my new iPAD2, when I tap an icon for a long time it doesn't flick. What can I do for that?

    On my new iPAD2, when I tap an appls icon for a long time it doesn't flick. What con I do for that.

    Try this and see if it helps.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Or....
    Quit all apps and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But wont work anywhere now

    After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But won't work anywhere now.  I tried re-setting but has not worked.  Any ideas would be appreciated.

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • When i turn my macbook pro on I get a green apple then just a white screen

    When I turn my macbook pro on I get a green and white lined apple then just a white screen anyone help please ?

    Hey there Petecaswell,
    It sounds like you are seeing a green Apple logo, and then a white screen before the computer boots to your user. I would start by updating your computer:
    OS X: Updating OS X and Mac App Store apps
    http://support.apple.com/kb/HT1338
    Then if the issue persists, I would perform a PRAM reset:
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/PH14222
    Shut down your Mac.
    Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on your Mac.
    Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
    Release the keys.
    Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • HT4764 when i open safari, it opens with a highlighted screen and does not respond

    when i open safari, it opens with a highlighted screen and does not respond

    So it seems the issue is when iMovie is wanting to creat thumbnails, if I ask it to ignore then it's fine but if not it hangs up searching for the video file.

  • My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?

    My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?
    Thanks

    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • I have iTunes U on my iPad for school. I won't open up any power points when it does it's just a white screen. Please help. I need it for school

    I have iTunes U on my iPad mini. It won't open any power points on it and when I do it's just a white screen. This just started happening about an hour ago. I need this for school so please help

    I have the same problem with the store.  I click the link, and it looks like the store is loading.  However, all I get is a white screen.
    Also, my new Iphone 4s will only get to "step 2 of 5, backing up iphone."  I left the phone connected to the computer all night, and when I woke up, it was still at the same spot, with no progress made. 
    I've uninstalled, everything from apple, rebooted the computer, and then re-installed the latest itunes.  Still nothing.

  • Ive just updated my ipod touch 4th gen, but the bat went flat now its just a white screen and when i plug it into my laptop nothing happenes

    ive just updated my ipod touch 4th gen, but the bat went flat now its just a white screen and when i plug it into my laptop nothing happenes

    Hello,
    This will fix your problem!
    To put the device in DFU mode,
    1. Connect the device to iTunes
    2. Hold both the power button and the home button down simultaneously
    3. After 10 seconds, release the power button but leave the home button pressed
    4. iTunes should then recognize that the device has entered DFU mode and ask to restore.
    That should get you back on your way.
    ~Lt. Leviathan

  • Hello, I have a MacBook Air, when I was watching a movie it started to freeze, so I turned off. But when I turn it on just the white screen appears nothing else. I looked on other websites, but the methods didn't help.

    Hello, I have a MacBook Air, when I was watching a movie it started to freeze, so I turned off. But when I turn it on just the white screen appears nothing else. I looked on other websites, but the methods didn't help.

    Try a Safe Mode boot ...
    Startup your Mac in Safe Mode
    A Safe Mode boot takes much longer than a normal boot so be patient.
    Once you are in Safe Mode, click Restart from the Apple () menu.

  • This is my first mac, it is a macbook pro. i restarted it but when it started back up i saw a white screen and then it prompted me to insert the reboot disk. anyone else have this problem?

    I recently bought a Macbook Pro, this is my first Mac. I restarted it, but when it started back there was a plain white screen and then it prompted me to insert the reboot disk. Has anyone else had this problem and is there a way to do this manually like with PC's?

    The new Mac's came with OS X Lion 10.7 and there are no boot disks.
    Since it's so new, take it back to the Apple Store and let them deal with it.
    If not you can hold Command and r (as in rotten) keys down and boot the computer.
    You'll be presented with a several options, including one to reinstall OS X Lion provided you have a Apple ID, which means you have to use Safari in there to set one up. To do that you need to set up a email account with Google or Yahoo. Once you get the ID, then you can download Lion and reinstall it.
    It's so stupid not having a copy of the OS on hand to perform your own repairs.
    Of course Apple will be happy to sell you a $69 Lion USB stick.
    Like I said, take it back to the store, and try to get your money back, that will force them to think about just giving you a replacement machine that works.
    Lion doesn't work really but it can be acceptable until the patches get released.

Maybe you are looking for

  • CreativeCloud download manager has dissapeared and I can't install anything nomore

    My Creative Cloud Download Manager updated itself to the new layout but the next time I turned on my computer it was gone and I can't find it on my computer. One day a notification turned up to say that there was two new downloads but after I downloa

  • Exporting images in bridge CS5

    for some reason when we go to export images we have adjusted in Bridge CS5, the only option that comes up is "hard drive".. when we select that we have no idea where it is exporting to. On our desktop we have other options like Facebook, and any plac

  • Fix a few "lost" master files from accidental hard disk disconnect?

    By gross stupidity, I disconnected the firewire cable to my external hard disk on which reside all my masters in the middle of a 'relocate masters' execution. I normally load new images into the aperture library, cull and edit them, and then relocate

  • Solaris 10 X86 no internet connexion

    Hi, Just after installation, Mozilla 1.7 cannot access internet : The interface e1000g0 works (ping, scp, ssh in both directions) Is it a configuration problem ? Help should be appreciated. # mozilla -debug IP ADDRESS: e1000g0 = xx.xx.49.12 DNS DOMAI

  • Need to apply a label based on db content

    Hi, I have an Access database given to me by a client, and I can't change anything about it because of other uses that the db is put to other than the website. Within the db is a table that holds a field called address type. That address type could b