IPad2 will not reboot after installing iOS8

stalled in the beginning of the reboot after the install.  did the install connected to iTunes.  iTunes shows the iPad connected.  anyone else with this problem?  suggestions?

Now, even iTunes won't recognize the iPad. Is there anyway to uninstall IOS8?

Similar Messages

  • Photoshop CS4 will not launch after installing Yosemite.

    Photoshop CS4 will not launch after installing Yosemite. All the other CS4 apps open. I upgraded Java. Genius Bar could not get it to launch.

    Here's the fix I found, by way of an explanation...
    Snow Leopard prompted me on my first startup with the following error:
    "There is a conflict with the _______ font file. This font file contains a font name that conflicts with a system font required by Mac OS X to display onscreen text. You should move this font file to the Trash."
    The fonts it said were conflicting: Helvetica, HelveticaNeue.dfont, Lucida Grande, and Monaco. I figured Snow Leopard probably wanted to replace these fonts with newer versions, and so I clicked "Move to Trash" on all four.
    Apparently 10.6 trashed these fonts but didn't replace them. This was causing Photoshop to crash on load.
    So I restored my ~/Library/Fonts folder from a backup made just before upgrading and this time after a reboot I said "Allow Conflict" on all four dialog boxes and launched Photoshop... everything is back to normal!
    Not sure what kind of "conflict" it's referring to, but apparently moving these font files to the trash as OS X prompted me to do broke a number of apps. Should I report this as a bug?
    Thanks for the ideas!

  • Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

  • TS1702 My iPad2 will not download and install iOS6!!!!! I have tried over 4 times, powered off, etc

    My iPad2 will not download and install iOS6!!!!! I have tried over 4 times, powered off, etc HELP!!!!!

    OTA or iTunes? Yesterday I used iTunes to update the wifey's with no issues. What are the symptoms?

  • PE 9 will not load after installing Elements 10

    Installed Elements 10 on Vista 64-bit.  Did not uninstall Elements 9.  Now PE 9 will not load; get window Adobe Premiere Elements.exe - No Disk.  There is no disk in the drive. Please insert a disk into drive\Harddisk2\DR2.  Tried disk 2 of 3 from package, nothing happens.

    Tried twice, PE9 still locked up both times - I think the intent is to have me try PE10, because that did work!!!
      From: Steve Grisetti
      Sent: Monday, January 02, 2012 7:09 PM
      To: cptiger
      Subject: PE 9 will not load after installing Elements 10
            Re: PE 9 will not load after installing Elements 10
            created by Steve Grisetti in Premiere Elements - View the full discussion

  • HT201210 my ipad 2 will not reboot after the ios6.1 update

    My IPad 2 froze and will not reboot after I went from IOS 6 to the update of IOS 6.1. I tried all the step given and nothing is rebooting it.

    http://support.apple.com/kb/ht4097
    You may need to try this More than once.

  • Telephone will not work after installing fax wizard

    I have  a new HP Office Pro 8615.   After I installed the fax wizard, my telephone quit receiving or sending calls.  The only incoming call will ring on the fax.  Can I uninstall the fax, as I do not need it?

    Hi , Welcome to the HP Forums! I see that your telephone will not work after installing fax wizard, for your HP Officejet Pro 8615. I am happy to help!  What is the Operating System you are using? Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos. If you do not need the fax, all you should have to do is unplug the phone cable from the back of the printer. That will prevent the printer from using the fax function.  If your phone continues not to work, I would consider contacting your phone provider.  Thank you for posting!  “Please click the Thumbs up icon below to thank me for responding.”

  • HT4528 My (2) I5 phones ios 8.0.2 firmware 7.03.00 will not rotate after installing IOS 8

    My (2) I5 phones ios 8.0.2 firmware 7.03.00 will not rotate after installing IOS 8. I have lock portrait orientation turned off. It won't even after turning the phone to the portrait landscape position it will not even turn TURN ON!!

    It shows I5c... the phones are I5 not I5c's

  • Macbook pro (lion) will not reboot after updating itunes

    downloaded itunes update and computer will not reboot. I get grey screen with apple and swirling icon. Have tried turning on and off, and putting into safe mode but nothing has worked. HELP

    Actually my MacBook pro is 2011 model! I managed to install Lion on an external disc and start my MacBook from it. Although the internal disc is seen I cannot retrieve my data. Anyone knows how I do that please?

  • Macbook pro will not reboot after updates

    Macbook pro retina display will not restart after iupdates installed

    Which updates did you install? 
    Exactly what happens when you try to restart?  If you are getting any error messages what do they say? 

  • Mac mini G4 will not reboot after Onyx upgrade

    DURING UPGRADE OF ONYX INSTRUCTED TO RUN REPAIR DISK FROM MAC OSX INSTALL DISK. SYSTEM WILL NOT REBOOT. ANY SUGGESTIONS?

    Have you booted from the OSX install disc yet?
    With the power on, insert this disc, then force the computer to turn off by holding down the power button for 5-10 seconds.
    Then restart the computer. As soon as you hear the startup chime, hold down the C key -- and keep holding it until you see the "gear" spinning on the screen.
    You need a wired keyboard to do this. If you don't have one, borrow a usb PC keyboard.
    Once you boot from the install disc, don't install! But instead run DiskUtility from the Utility menu at the top of the screen.
    BTW if DiskUtility can't repair the hard drive, you might have better luck with DiskWarrior -- though it will cost about $100 to find out.

  • Mouse will not scroll after installing lion os

    Mouse will not scroll after lion os install.

    In Lion the scrolling is natural i.e. reversed to the way that computers typically scroll. Think of the scroll as grabbing the page an moving it either up or down vs moving the scroll bar down up or down. Also, the scroll bars are "hidden" by default and only show up when you are scrolling.
    Are you using and Apple mouse? If you go to the system preferences and then to the "mouse" section there are options to change the natural scrolling. And if you go to System Preferences and then to "general" you can set it to show or hide the scroll bars.
    If this is not what the issue is let me know and let me know what mouse you are using because there is something else that it could be.

  • Boot Camp will not work after installing recovery disk

    I purchased a refurbished Macbook Pro 2012. I went ahead and installed dual ssds and used the Mac OS X recovery disk from USB flash drive. I wanted to install WIndows 7 through bootcamp. Bootcamp will not start after selecting continue. I'm not sure if boot camp is corrupted or something I did wrong.

    Well you'll need to see if that remote app has an update or if it is compatible with IOS 7.
    since you didn't state which remote app your using.

  • Mac Pro will not reboot after Bootcamp attempted installation

    I have an older quad-core 2009 Mac Pro. I tried to install Bootcamp before realizing that it's not supported. Now the Mac Pro will not reboot.
    It starts up fine. It shuts down fine. But it just will not reboot. When I try to reboot, it just clicks like it's trying to boot to a DVD or a drive that's not there (I have since formatted the drive I was using for Bootcamp and use it for Time Machine now).
    This is what I have tried:
    - PRAM reset
    - SMC reset
    What could be keeping my Mac Pro from rebooting properly?? Please help. Thank you!!

    So you tried with Mac and Windows on same drive?
    And you have Recovery partition.
    You made a clone with CCC as well and cloned the Recovery
    Paragon makes a couple programs to make life easier.
    And, Well, Boot Camp works. There are unwritten rules. There is a forum devoted to it.
    2009 is not old. Old is pre-2008 due to UEFI / EFI64 and how Windows 64-bit now looks during install.
    It did install but the drivers and updates and such might be an issue.
    Apple does not support HFS arrays, not just that Windows won't install but to mount, their Apple HFS driver.
    You left out so much and maybe your IT didn't include Windows on Mac.
    www.apple.com/support/bootcamp
    In general pull all your drives during install except that one Windows will be installed on.
    Do get video driver from ATI etc yourself
    Tell us what version, I assume Windows 8 which works fine other than a few issues - more with MacBook series and iMac or Mac Mini lines.

  • Imac will not reboot after loading apple software update

    I downloaded apple update software on imac air but it will not reboot. Just the apple and spinner. Never gets to sign in.

    Mac OS X: Gray screen appears during startup

Maybe you are looking for

  • Adjust Volume Across All Slides In Project

    Captivate v5.5 Does anyone have any experience in working with the Audio/Edit/Adjust Volume option in Captivate v5.5? I have created a project over a few days and the level of volume of some of the slides varies - some louder some not so loud and I n

  • Updating from iPhoto 4.0.3 to iLife 08

    1. If I update from iPhoto 4.0.3 to iLife 08 am I going to lose all my Albums? 2. When I export an album to a desktop file to burn it to a disk readable by TVs etc, the photos don't appear in the order that they are in the album. What have I done wro

  • Content viewer for pc download?

    I'm wanting to share a folio I've created for a client. They need to download it on their pc laptop but will need Content Viewer. I'm struggling to find it as a download? I can find it for Mac, Ipad, Android, Iphone etc. Can anyone help me find a pc

  • BO 3.1 WebTools DataSources Web App Missing

    Can anyone let me know where the DataSources Web Application that can be found under the old release of BO XI R2 under Program Files\Business Objects\BusinessObjects Enterprise 11.5\Web Content\Enterprise115\WebTools\websamples is under the BO 3.1 Re

  • Why is "Render Effects in Work Area" going so slow?

    I was working on a project using multicam, and I did my cuts before my color correcting and went to color and render the multicam sequence directly. After opening it in the timeline and tweaking color for awhile, I went to render the effects using th