Ipad3 and hp c310 printing problem

I have an ipad 3 and just bought a hp c310 I can print emails but not photos. The printer selects printer paper but then ejects paper without printing
Can anyone help

From the words of an HP engineer:
1) Make sure you have Internet connectivity to your printer. Open up one of the Apps on your printer an make sure the content loads.
2) Make sure you have the latest Firmware in your printer. While the C310 does support AirPrint out of the box, there have been Firmware updates since it shipped to make sure everything works correctly. After doing step 1, go to:
Tools->Web->Automatic Updates->Check for Product Updates. This should indicate your firmware is up-to-date or update firmware.
3) Sometimes simply restarting everything (Router, Printer, iOS devices) will clear up any problems you have.

Similar Messages

  • Frame Maker 9 and 10 PDF Print problem

    Frame Maker 9 and 10 PDF Print problem
    Hi I have an computer with windows 7 and the Adobe Software.
    The Distiller 9 with adobe Acrobat 9 and Adobe Design Standard CS3 is also installed.
    Now, I open in Frame Maker 9(Full Version) or 10(Trial Version)   an *.fm File. Then I go to “File- save as pdf” and then save I receive an message like this:
    “to execute the ‘Save as PDF’  is necessary to have install Acrobat Distiller 5.05 or higher”.  But I have the Distiller 9.
    Then I can click OK and now I receive another message like this:  “you must  define “PDF job options” if you want to execute it.”
    If I look for the PDF job options I can’t select something. But if I look in the Distiller I have a lot of option I can select.
    What is the problem. Is there a solution?
    Can somebody help me?

    Using AW 6.2.9 and Mac OS X v10.5.7, the file prints successfully to pdf using the "Save as PDF..." option in the print dialogue. I didn't try to print the result to paper, but that appears to eliminate the file itself as the cause of the problem.
    Two first aid steps that might resolve the issue:
    Delete the AW preferences.
    In the Finder, click the house icon (yourname) in the sidebar of a Finder window, then Library > Preferences..
       Locate and delete the file com.apple.appleworks.plist
       Open the folder AppleWorks
          Delete both cache files and the two preferences files.
          It's also safe to delete the Button Bars file, but unless you have issues related to the Button Bars, you're also safe to leave it there.
    AppleWorks will create new (and clean) versions of these files as it needs them.
    Repair Permissions.
    Go Applications > Utilities > Disk Utility
    Launch the application, select your startup drive, click First Aid, click Repair Permissions.
    Regards,
    Barry

  • HP C310 printer and Google Cloud Print Problems

    I am using a Chromebook with a C310 printer and Google Cloud Print. The print dialogue does not allow for multiple copies. Additinally, the print dialogue box does provide for specifying which pages in a given  document to print, but ignores it, always printed all the pages of a documebnt.  Can HP address this problem or is it a Google Cloud Print problem?
    This question was solved.
    View Solution.

    Unfortunately, is you are using the Chromebook and the dialog box does not allow for multiple prints, then it is likely a feature that has not been put into the Chromebook yet. I would suggest contacting them for support, as the printing software for our printer can only digest the commands it is given - if the command isn't there for multiple copies then the printer will not have any other choice but to print them one at a time.
    I hope this helps!

  • 10.6.7 update and now Canon printer problems

    I had the automatic 10.6.7 update two days ago and everything is fine except now I have printer issues with Canon MF8350. I can still scan, I can print from Safari, I can print from some .pdf but not others, I am unable to print anything from Word - they all come out as blank pages. Updates from Microsoft and Canon didn't help.
    If you don't know, anyone at least know how I can uninstall the update? I know how to find the updates list, but not how to get it out.

    I just want to let you all know that I fixed my printing problem.
    I could not add my printer under the System Preference>Print & Fax after I did the reset. But I can add the printer back to my Mac Pro by connecting the USB cable to the tower. When I connected my USB cable back to the Apple Extreme. The printer was offline. I did so many different thing still not working. Then I go the the discussion forum on Airport Express and ... I also followed a lot of advises there. Then someone give out a link on Apple support. I following the advise half way still printer was offline. Then I went to my Mac Book and to reset the printer, and add printer again, and click share this printer. I went back to my Mac Pro, and try print a page, I choose nearby printer (there was never has this option for me before). It has another printer icon with Canon MX310 series-1. Bingo, it printed from my Mac Pro also. I have two printer icons on my Mac Pro, one is the same name as the Mac book. I was very happy. It was 4 in the morning. Well, finally I could sleep good.
    I am still not sure exactly what the step to make my printer work again (Trial and Error). But I learn a lot by reading advises on this forum.
    S Han

  • Win7 and Reader X printing problem

    Tried printing a PDF file from a browser window (via Reader X) and it would not print to my primary printer (HP Deskjet 5550 connected to a NAS USB port so it has a network address).  Saving the file and printing from Reader X as a standalone app didn't help.
    Other applications printed fine, and I could print from Reader X (standalone or in a browser) to a wireless Epson Workforce 610, except it was out of black ink so that wasn't a viable option.
    It took forever to bring up the dialog box, and after selecting print nothing happened.  The print queue never showed anything and no error message was presented.

    Hi
    We have the same problem with Read X !
    We have 2no network HP designjet 1055cm A0 large format inkjet printers with driver v4.67 on XP windows software pc's
    and when we do a print preview, the settings are fixed on A4 and you cannot change them at all.  We are always printing with A1 and A0 PDF's .
    We also have a canon irc2880i A4/A3 network laser printer, but that works with no problem.
    I have now unstalled reader X and reinstalled back again 9.4 reader and it is all working again with the designjets !
    Wake up Adobe on this problem, you have badly let us down on this !

  • Win 7 and Win XP Printing Problem

    I currently have a HP LaserJet 1320 printer connected to a desktop computer running Windows 7 (64-bit).  I also have a notebook running Windows 7 (32- bit).
    These two computers are set up in a Home Group and the LaserJet prints on both of these computers with no problems.
    I also have two additional notebooks running windows XP. These two computers are set up in a network along with the other two but cannot print from the LaserJet printer.
    I have tried everything I know to do and cannot solve this problem.

    Hello Alisononthego,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP Laserjet 4250 is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Leopard 10.5.6 and HP Wireless printing problem

    I have a client with a iMac 20" model, shes been having problems with her HP wireless printer for a while now (Photosmart 7280), its setup with static IP, installing the HP software, it can sense the printer, both Bonjour and IP, but when come to printing, it will start the queue as you would expect, but on the printer it simply display 'Printing' and thats it, it just sits there doing nothing else, you cant even cancel the printing, thinking its a fault with the printer, we went out and got her the latest HP Photosmart 8180, guess what ? it does the same thing.
    I searched through HP forum, and people are blaming OSX that after 10.5.1 it broke the wireless printing, because I recalled that her old Macbook running tiger never had this problem with the old 7280 printer (sadly its been upgraded to the latest Leopard before Xmas)
    With the new 8180 , I use my Notebook running XP Pro and connected to it wireless and printed first time, so the problem does seem like its coming from OSX Leopard, but sadly I cant find a solution, I posted twice on their messageboard but not a single reply after 2 months, so I am hoping that some experts here may have a solution or workaround to this.

    dimsumbox,
    I am probably having the same issue as you are. The "HP IP Printing" is not listed in the drop-down menu under "More Printers". As such, attempting to print over the wireless is not working.
    Using a wired connection, and selecting "Default" I am able to add the printer and print to it.
    On a home network, you may see the printer under "Default". Unfortunately for me, my wired and wireless networks are separate and this option does not work for me.
    The printer in question is a Color LaserJet 3500n, and I'm attempting to locate how I can add the "HP IP Printing" option without reinstalling the entire system.
    Message was edited by: green spyder

  • HP LaserJet CP1025 and Time Capsule printing problem

    Hello. I'm experiencing a problem with network printing with using HP LaserJet CP1025 plugged through USB into a Time Capsule. The problem persists for a long time already. Every time I need to print, I need to reboot my Time Capsule because there is an error in the printing queue, Mac OS X shows a message about some "USB write error", Windows just shows an "error". The only solution to this was rebooting the Time Capsule as told on Apple Support, with unplugging it first, then rebooting the printer, then plugging the Time Capsule. Now even this way doesn't work. This problem is the same on three different computers running Mac OS X Lion, Mountain Lion and Windows 8, so it's not driver problem, however, Bonjour doesn't allow me to use drivers from the printer CD on Windows so I had to install "universal" drivers which allowed me to print. I update the firmware on the Time Capsule from time to time, so it won't help either.  It's extremely annoying to mess around with Time Capsule for half an hour each time I need to print, so I ask for assistance. Thanks to everyone who can help!

    There is probably a whole bunch of different issues happening here.
    Lion and ML have just as much problem with losing connection to the TC as the windows computer will.
    I suggest you do a factory reset of the TC..
    You then need to set it up as a straight SMB (windows networking) device.
    All network names must be SMB compatible. Short, no spaces.. no apostrophe for sure. pure alphanumeric.
    That includes TC name, wireless name/s, passwords of course. and even the hard disk name.
    In the file sharing page I would also turn on the guest access and set the WORKGROUP. Although that is more for disk sharing they should also help print sharing.
    The printer name, I am not sure.. but you want that as simple as possible as well and following the above rules.
    I am not at all sure the latest firmware is the panacea to all ills.. in fact I tend to run any TC i have on 7.5.2 and find it works better. Especially the older ones.
    If it still doesn't work, it is a case of buy a new network printer.. when this lot of toners finish.. buy a new printer instead .. make sure it is network capable. Far better than using usb printers and since printers are cheap cf the consumables.. well worth it.
    Also make sure it is airprint capable and preferably postscript as well although I don't know if the combo is available.

  • Same condition type on header and item level = printing problem

    Hi
    I have a customer using some condition types on both item level and header level in quotations, orders, invoices ...
    In the pricing procedures it is customized (V_T683S-DRUKZ) that the conditions must be printed on header level (that is at the bottom of the documents).
    My job is to make the Smartform to print the documents, and I want it of course to be as close to SAP standard as possible.
    SAP standard will print these conditions on header level even if the conditions are at item level, but my customer wants the conditions created on header level to be printed on header level and conditions created on item level to be printed on item level.
    I'm no pricing expert, so my question is:
    Will it be fair if I tell the customer that using the same condition types on header and item level is bad practices - or at least bad karma?
    Best regards
    Thomas Madsen Nielsen

    Hi Shiva Ram and Madhu
    I have no problem understanding header vs. item conditions, so I really don't see anything in oss note 876617, that is relevant in this case.
    Madhu - I do not agree that everything is fine. My issue is that I want to stick as closely to SAP standard customizing as possible. In SAP standard customizing of a condition type you can use the flag V_T683S-DRUKZ to determine if the condition should be printed on header OR item level - you can not choose both header AND item level.
    I have a SAP standard smartform using two functions modules for reading header and item conditions. RV_PRICE_PRINT_ITEM and RV_PRICE_PRINT_HEAD. These function modules are based on the DRUKZ customizing flag and a condition marked for printing on header level will be supplied by RV_PRICE_PRINT_HEAD even when the condition is on item level.
    My point is: SAP standard customizing does not support printing of same condition on both header and item level. I can of course write tons of code to work around this problem, but that would be bad practices

  • F.17 and f.18 printing problem .....

    Hi Experts,
    In F.17 & F.18 Transaction of Balance Confirmation in Print Control. I Want only Printer for form set. It is asking default for printer for check list. I want to remove default option from Printer for check list. How to remove it ?
    I want only in Printer for form set rest all i want to remove default entry.
    Yusuf
    Message was edited by:
            YUSUF BHORI

    Copied Program in Z and modified.
    Problem Solved.

  • MAC computer with OS 10.6 and Laserjet P1006 printer problems

    HP says:  The following HP LaserJets were not supported with the initial Mac OS X 10.6 release. HP is committed to providing Snow Leopard driver support for these models, and will provide updated information and software from www.hp.com/support .
    HP LaserJet M1005 series
    HP LaserJet P1006
    HP LaserJet P1505
    Where is the driver for LaserJet P1006 (B&W printer)?  I upgraded to Snow Leopard 10.6.7 and now my HP LaserJet printer does not print.  It says printer is off-line.   Neither HP nor Apple has support.  Thank you.  

    I am having the same problem.   Mac 10.6 & LaserJet P1006

  • CS4 and EPSON R2880 Printing Problems

    I am having a very difficult time getting color matched prints with CS4 and my R2880 Epson printer. I had no issues with CS3. I have tried every combination available to me and I get very drab almost browinsh prints. I have the latest drivers and also have upgraded to Vista, no change there at all. I am using the proper ICC profiles as well. Anyone else with similar problems? Any solutions? It is very frustrating. Thanks, Bob

    I have an Epson R280 on my desk and just did a test printing the same image with CS4/Vista64, CS4/XP, and again with CS3/XP. All three prints used the Epson supplied paper profile and the colour management settings were all set the same.
    The results are identical.
    I suspect there's a wrong setting somewhere:
    - wrong profile being used
    - not disabling printer colour management
    - wrong paper setting or printing on the wrong side of the paper
    I can't imagine why the results would be any different from one version of PS to another.

  • Windows 7 and Acrobat 8 printing problems

    I recently installed Windows 7 as my operating system and when I try to print an image I dont get an image from the printer, just some unconnected marks.  Once I was able to find a setting in acrobat that read "not to print pictures as text" but am unable to find it again.  Adobe support blew me off so I need to try this avenue.  Don't think I will go with Adobe again.  Any body know where this setting is?

    Acrobat 8 does not work under Windows 7. You need to install either Acrobat 9 with all updates or Acrobat X.

  • Maverick and Photosmart 7150 printer problems

    Updated to Maverick os x and now my hp photosmart 7150 printer won't work .. can I update .. and if so how do I update my printer driver for maverick?

    Hello
    I believe the HP Photosmart 7150 was released back around 2002.    
    Which version of OSX did you upgrade from ?   Were you running previous OS X 10.6 when you upgraded to new 10.9 ?
    Unfortunately, the HP Photosmart 7150 has not been supported for some time now with the last few releases of OS X.
    If this reply helped you, please say thanks by clicking the blue Kudos star.
    I am an HP employee

  • Printing problems with HP Laserjet P1005

    everything seems to be ok with my printer HP Lasejet P1005, but it just  doesn't print. The works are in the gueue and error messages continually is "set the new toner cartridge"  althrough I've changed the cartridge already.  Also there is a message "HP:s part number"
    What can or should I do??? Help!!!

    Hi @rlp48,
    I see by your post that you are getting the error message "set the new toner cartridge" and you have already changed it with a HP toner. I would like to help.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
    Open and close the lid 5 times quickly. It should print out a page with lines on it.
    Did it print the self test?
    If the self test page printed, clear the Spool folder and restart the Print Spooler and try printing again.
    How to Clear Current Print Queue In Windows Vista & Windows 7.
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    Are you using Genuine HP Toner?
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for