Ipad3 camera not functioning after connecting to laptop

After connecting ipad3 to my laptop to delete some photos, the camera does not function properly. it is slow and "saving photo" keep appearing when i capture. and no photos can be taken after that. what should i do?

Hello @Rob1216 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having issues scanning. I'd like to help!
Does this issue occur when making a copy as opposed to a scan?
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

Iphone 6 plus facetime camera not working after 8.1 upgrade

iphone 6 plus facetime camera not working after ios 8.1 upgrade, also while making calls the voice on the other side sounds distant. Any pointers.

It seems the facetime camera does not work for whatsapp only it works normally.

Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed latest version of Tuxera NTFS for Mac.

I purchased a 3TB HDD (WD USB 3.0 $100) to replace the 2TB Seagate for a new Time Machine HDD. The 2B was full and backups were deleting older files. The 3TB was formatted NTFS and I want to "recover" the included SW before I reformatted the HDD for the iMac. I discovered that MacFuse was out of date and unsupported and my NTFS-32 was also out of date so I uninstalled both and then installed the most recent version of Tuxera NTFS for Mac. I rebooted and discovered that the FW800 port was unresponsive. Below is the EtreCheck report:
Problem description:
Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed Tuxera NTFS for Mac.
EtreCheck version: 2.0.8 (95)
Report generated October 30, 2014 7:11:17 PM EDT
Hardware Information: ℹ️
iMac (24-inch Mid 2007) (Verified)
iMac - model: iMac7,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI,RadeonHD2600 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 0:17:34
Disk Information: ℹ️
WDC WD5000AAKS-40TMA0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
ML 10.8 (disk0s2) / [Startup]: 499.25 GB (20.92 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Logitech USB Receiver
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Hardware Monitor ƒ/HardwareMonitor.app
[loaded] com.bresink.driver.BRESINKx86Monitoring (7.0) Support
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18615.948847) Support
[not loaded] com.parallels.kext.hypervisor (8.0 18615.948847) Support
[not loaded] com.parallels.kext.netbridge (8.0 18615.948847) Support
[not loaded] com.parallels.kext.usbconnect (8.0 18615.948847) Support
[not loaded] com.parallels.kext.vnic (8.0 18615.948847) Support
/Applications/Toast Titanium v11.1/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Applications/Toast Titanium/Toast Titanium v11.1 (1072).app
[not loaded] com.roxio.TDIXController (2.0) Support
/Library/Application Support/Symantec/AntiVirus
[loaded] com.symantec.kext.SymAPComm (12.2f1 - SDK 10.6) Support
/System/Library/Extensions
[loaded] com.Logitech.Control Center.HID Driver (3.9.0 - SDK 10.6) Support
[loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) Support
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
[not loaded] com.increw.kext.speedit (0.32) Support
[loaded] com.logitech.manager.kernel.driver (4.10.0 - SDK 10.8) Support
[not loaded] com.olympus.CamBlockCommandsDevice (2.0.0) Support
[not loaded] com.olympus.CamBlockCommandsDeviceUP (2.0.0) Support
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
[loaded] com.symantec.kext.internetSecurity (5.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ips (3.5f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ndcengine (1.0f1 - SDK 10.6) Support
[loaded] com.taoeffect.ispy.kext (2.0.2 - SDK 10.2) Support
/System/Library/Extensions/OlympusDSCDriver.kext/Contents/PlugIns
[not loaded] com.olympus.CamFWSerialBusProtocolTransport (2.0.0) Support
[not loaded] com.olympus.CamUSBMassStorageClass (2.0.0) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
/Users/[redacted]/Downloads/LCC Installer.app
[not loaded] com.Logitech.Unifying.HID Driver (1.3.1 - SDK 10.8) Support
Startup Items: ℹ️
TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] com.canon.MFManager.plist Support
[not loaded] com.cooliris.SetLaunchArch.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[running] com.logitech.manager.daemon.plist Support
[running] com.micromat.TechToolProAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.symantec.uiagent.application.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[running] com.eltima.ElmediaPlayer.daemon.plist Support
[loaded] com.embraceware.awaken.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.micromat.TechToolProDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
[loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
[failed] com.symantec.liveupdate.daemon.plist Support
[not loaded] com.symantec.sep.migratesettings.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] com.taoeffect.ispyd.plist Support
[running] com.wdc.drivemanagerservice.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.prosofteng.DGMonitor.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.taoeffect.EspionageHelper.plist Support
User Login Items: ℹ️
Speedy Mac Application (/Applications/Speedy Mac/Speedy Mac.app)
AwakenHelper Application (/Users/[redacted]/Library/Application Support/Awaken/AwakenHelper.app)
GetBackupAgent Application (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
WDDriveUtilityHelper Application (/Users/[redacted]/Downloads/WD/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
ClustersHelper Application (/Library/PreferencePanes/Clusters.prefPane/Contents/Resources/ClustersHelper.a pp)
RealPlayer Downloader Agent Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
SAVDiskMountNotify UNKNOWN (missing value)
ScanNotification UNKNOWN (missing value)
Launch Nikon Message Center 2 Application (/Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app)
Internet Plug-ins: ℹ️
EPPEX Plugin: Version: 10.0 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 9.4.6 Support
Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 Support
NPVirtools: Version: 4.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.6.8r638 Support
QuickTime Plugin: Version: 7.7.1
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
GarminGpsControl: Version: 2.9.3.0 Release Support
ToontownBundleManager: Version: (null) Support
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
OVSHelper: Version: 1.0 Support
CoolirisWebKitPlugin: Version: (null) Support
Google Earth Web Plug-in: Version: 6.1 Support
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
User Internet Plug-ins: ℹ️
BrowserPlus_2.9.2: Version: 2.9.2 Support
Picasa: Version: 1.0 Support
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video>
Open in Internet Explorer
DivX HiQ
Aimersoft Video Converter
3rd Party Preference Panes: ℹ️
BrowserPlus Support
Clusters Support
Déjà Vu Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Logitech Control Center Support
Logi Preference Manager Support
MenuMeters Support
Perian Support
Symantec QuickMenu Support
TechTool Protection Support
Tuxera NTFS Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
iMac TimeMachine [Local]
Total size: 2 TB
Total number of backups: 80
Oldest backup: 2011-09-18 05:21:33 +0000
Last backup: 2014-10-05 20:18:55 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 0 B X 3)
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Top Processes by CPU: ℹ️
      2% WindowServer
      0% Speedy
      0% SystemUIServer
      0% RealPlayer Downloader Agent
      0% ps
Top Processes by Memory: ℹ️
288 MB SymDaemon
150 MB Speedy
137 MB Safari
82 MB WebProcess
82 MB coreservicesd
Virtual Memory Information: ℹ️
2.17 GB Free RAM
1.46 GB Active RAM
148 MB Inactive RAM
518 MB Wired RAM
388 MB Page-ins
0 B Page-outs
I hope someone has some ideas! TIA.

Do you have another cable you can test with? Do you have access to another computer with Firewire you can test with?
FireWire Device not Working
FireWire/USB - Quick Assist

Web camera not working after sowtware update

HI, there
My macbook's (core duo)camera not working after installing show leopard, can you advice if I need some other updates or anything to make it work?

Hi purduejatt, I apologize for the delayed response as I understand how important it is to have a working camera! I would suggest clearing the data in the Camera application. Press Menu>Settings>Application Manager>All>Camera>Clear data. Please keep me updated on the status as I would be more than happy to provide additional support.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Radio Fm in not functioning after upgarding firm w...

Hi,
radio Fm in not functioning after upgarding firm ware 410.21.010
please help to solve it

I am not aware of any "on-device" or native OS FM radio functions. Perhaps it has yet to be implemented, or awaiting a third party to develop an app to use it?
I'd love to have it functional also!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Customer exit is not functioning after ECC upgrade/support package

It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
COZF0002 Change purchase req. for externally procured component
EXIT_SAPLCOZF_002
INCLUDE ZXCOZU02
*& Include           ZXCOZU02
CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban>   TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
      WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
      WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
*& Include ZXCOZU02
CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban> TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
SELECT SINGLE fkstl INTO l_fkstl FROM prps
WHERE pspnr = caufvd_imp-pspel.
IF ( sy-subrc = 0 ).
WRITE l_fkstl TO <fs_eban>-zzfistl.
ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Canon 5D digital camera not able to connect with EOS utiliities software

I use the Canon 5D camera and have a Macbook pro which I got about 3 months ago. I use Canons EOS utilities for this purpose. When the camera is tethered to the computer, you start the software and when an exposure is made, Image browser is opened by the eos utility software and you see the image on the laptop, you can check lighting and other things using this, it is a great tool, at the same time you can save the image to the memory card on the camera as well as on the laptop. Another bonus is being able to control the camera functions on the laptop. Anyhow, just bought the new macbook as a backup when I travel. It has leopard on it and the eos software does not work. I have talked to Canon and Apple about this. it seems that nothing I do seems to make it work, anyone have any hints.
thanks

Sounds like the EOS software may not yet be compatible with Leopard. Did the Canon tech point you to a later version or indicate that it would run under Leopard?
I'd highly recommend that you try connecting the 5D using iPhoto, which is basic, yet serviceable. If you can connect to the camera using iPhoto, you know the systems are working, and the fault is not in the cable. Alternatively, use an inexpensive card reader and connect the card reader via USB cable and take the card out of the camera and use the reader to download the images into the computer. This is preferable, as any disconnection between the camera and the computer while data is being transferred can corrupt images. Using a card reader is safer.
As a long time Canon digital user, I'd recommend using Photoshop and the Camera RAW converter rather than the crippled Canon software -- the EOS software is really pretty awful. I gave it up over three years ago when I bought my 20D and haven't looked back.

Iphone 3 not charging or connecting to laptop

Hi, my mate has brought his iphone 3G to me to see if i could assist with problem.
when the phone is plugged into the mains on charge the apple symbol apperas and is there for some time before anything happens.
It then dissapears and when you press the home button on the front it says ios 6 and slide bar saying set up.
The top of the page is saying searching and there is battery symbol.
upon sliding thebar it requests connect to apple i tunes. upon removal from charger everything instantly goes off and upon connection to laptop via lead nothing ever happens. after a while the apple symbol flashes slowly but this is the end of things.
the laptop/itunes donot reconise that phone is plugged in.
Does anyone have any answers for a fix or is the phone finished????
The phone was working as normal before any problems, he took it into store and they said liquid corrosion which is not right.

Charge the iPhone to a wall outlet.
Try a different USB cable.
Try different USB ports.

Isight camera not working after the last update

After reboot of the last OS update
Isight camera not working...
i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
just to give you a recap of what i've tried so far:
* restarting (obviously)
* resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
* just shutting down my computer and taking the battery out for several hours
any Help pls
because i mast to use it as soon as possible in a conference

*A few suggestions.........*
Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
my isight camera is not working-not recognized with photo booth or ichat
To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

Mapped drives do not open after connecting via Cisco VPN Client

I have an issue when I initially connect to my remote network, I cannot get to any mapped drive unless I wait a few minutes for the VPN connect to mature. To explain further, I have to wait 2-4 minutes after connecting to the VPN for me to actually connect to those drives.
The error that pops up is:
"An error occurred while reconnecting to DriveLetter: to \\Server\sharedDrive\ Microsoft WIndows Network: The network path was not found. This connection has not been restored.
Now, immediately after I connect, I am able to successfully ping the server that hosts those folder locations but for some reason I cannot get to the server via UNC/shared drives until I wait a few minutes after connecting.
Below is the list of error logs I get when attempting to connect to the mapped drives during those first few minutes of connectivity:
1 15:26:39.804 10/06/14 Sev=Warning/3 IKE/0xA300005F
Firewall, Sygate Security Agent, is not running, the client will not send firewall information to concentrator.
2 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
3 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
4 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
5 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
6 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
7 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
8 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
9 15:28:10.614 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
10 15:28:17.188 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
11 15:28:17.188 10/06/14 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xE4510023 (IPSecDrvCB:856)
12 15:33:50.642 10/06/14 Sev=Warning/2 CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=192.168.11.120, error 0
13 15:33:51.656 10/06/14 Sev=Warning/2 CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
14 15:35:16.855 10/06/14 Sev=Warning/3 IKE/0xA300005F
Firewall, Sygate Security Agent, is not running, the client will not send firewall information to concentrator.
Any ideas on what it could be?

I have a client that is showing a similar issue.. Windows 7 computer using Cisco IPSec client terminating on a Cisco 881 Router. I can ping the server by IP, Name and even access the drive from the start menu option, but not the mapped drive. Currently I am looking into this from a offline file issue in windows, but ran across this post and was wondering if you had figured this out? I am going to try the following and will post back if that resolves it.
Doing some research I found that Windows 7 and Vista both have what’s called “slow link mode”. The behavior is that if the latency of the network connection exceeds 80 milliseconds (ms), the system will transition the files to “offline mode”. The 80 ms value is configurable using a local group policy edit.
Open Group policy (start -> run -> gpedit.msc)
Expand “Computer Configuration”
Expand “Administrative Templates”
Expand “Network”
Click on “Offline Files”
Locate “Configure slow-link mode”
This policy can either be disabled or set to a higher value for slower connections.
https://www.conetrix.com/Blog/post/Fixing-Problem-With-Windows-7-Shared-Files-and-Mapped-Drives-Unavailable-Over-VPN.aspx

E71x not vibrate after connected with PC Suite

Anyone has the same problem? My E71x purchased 2 days ago does not vibrate while and after connected with PC Suite. I had to turn off and turn it back on to activate the vibrating thing.
Thanks

mmm... ill describe the whole situation:
phone has 2 days old
I connected it to the PC
Running PC SUITE
All was functioning normal, i had about half charge
i got a phone call from my gf, when i picked up the call, i disconnected the phone
the line dropped dead. so did the phone
i tried to restart it to no avail
i plugged it to the pc, didnt work
i removed the batter, didnt work
so i connected it to the power cord, and the lights turned on
i disconnected then tried to boot it up, and didnt work
i reconnected the power cord and started it while on external power, and it did start, showing just 1 little bar of battery.
I left it there for about 1hr and removed it, and charge was FULL
i reconnected to PC and im monitoring it and it hasn't discharged
so its weird... <.<
my guess is that unlike HTC or Sony Ericsson phones, the data cable and hte power cable CAN be connected at the SAME TIME. that would be the only explanaition on why it doenst charge up on the USB (but ohter theory of mine is that if i connect it to the PC on file trnasfer mode, it might charge it)

IPhone 5 camera not working after iOS7.2

after updating my phone to the 2nd iOS7, a week or so later my camera has completely stopped working. After looking all over these discussion pages I've tried EVERYTHING except erasing the phone & restoring it. other than that, NOHTING has worked!!! I've read where this is a "hardware" issue? I don't know for sure. My flashlight is also not working at all!! I want to take it to the iPhone store, but my screen has 2 small cracks at the top. taking it "out of warranty" so I have read. and that it will be aroud $230 for a new one, cheaper than what I have paid, YES! but... is that a set price?? or do they have certain prices for certain damages? I just need some answers!!!!

I had the same problem it's definitely a software issue because the camera would sometimes work in camera apps but now I could not switch cameras at all.
I may have found a solution of course I probably won't get credit for thanks to Apple.
I believe the problem arises from a bug when the camera is used in lock mode, try restarting your phone with the home and power button. Then open your camera in locked mode and set the flash to auto. Maybe take a few pictures, switch the camera back and fourth, turn HDR on and off, but make sure the flash is set to auto before you unlock the phone. Heck even try playing with the flashlight.
After I did this in locked mode to my surprise my camera and flashlight are now fully functional after I have unlocked it with the password. I'm not to sure what triggered this bug but when I first got iOS 7 and played with my phone some how I unlocked the lock screen without putting in a password. Just by using the camera and the notification and control Center, I unlocked the phone which might of triggered the bug.

Camera not working on brand new laptop

Camera is not working on brand new laptop.

You do it manually by launching FaceTime and ensuring that FaceTime > Preferences... show that FaceTime is turned "ON".

ISight Camera not working after Leopard install

On my 1st gen Intel 20" iMac, after the Leopard upgrade -- which went very smoothly -- my iSight camera no longer works. I have tried it in Photo Booth and iChat Video and it is the same in each, so it is the camera, apparently, not the application using it.
In the self-viewing screen on my iMac, I see myself for just a second or so, then I fade out quickly and there is nothing to see but black. If I shine a desk lamp in my face, then I can just barely see the outline of my image but the picture is mostly black. It seems like an exposure problem: the camera seems to adjust, shutting down as though I am very brightly lit but since I am not, it produces only a black picture.
I also have a 1st gen Intel white MacBook that I have also upgraded to Leopard. The iSight camera seems to work just fine on that computer. I tried out the video in Photo Booth and it worked great.
Any ideas?

Hi,
I too am having the same problem, and I'm using the old school iSight camera and immediately after installing Leopard, it won't work. I can't even power up the camera. It will power up for about 3 seconds then power down as fast as the little green light came on. It was fine about an hour before the 10.5 install. I powered down and unplugged everything for about 10 mins. then plugged it all back in, and still not working. So I am back to the drawing board trying to sort this out. If anyone has anymore thoughts on this, pls. chime in. All the suggestions seem to work for you folks after a little tweak. I even booted into OF mode and reset-nvram and reset-all for kicks to give it an even fresher start.
thanks!

Ipad not found when connected to laptop

Ipad not found when I connected to laptop and itunes

iOS: Device not recognized in iTunes for OS X
iOS: Device not recognized in iTunes for Windows

Ipad3 camera not functioning after connecting to laptop

Similar Messages

Maybe you are looking for