IPAD3 continuous hang Up Problem

My device is IPAD MC705D. IOS is up to date(6.1.3 or later). For the last couple days the device has been hanging up continuously. Also the device shuts down abruptly, screen goes black and apple logo showed up. This problem occurs while using both apps(any) and in ststic mood. I tried pressing home button and on/off simultaneously for 10 sec but the problem prevails after every restart. Really baffled by this issue. Does anyone has any sustainable solution ?

Suggest you backup (if it is possible) and restore to Factory Default.
Backup
http://support.apple.com/kb/ht1766

Similar Messages

I just upgraded to FF 4.0, and am overall unhappy with the app. It runs much slower than my previous version, and continually hangs...even on the Mozilla websites. I'm going to try and go back to my older version, which I loved.

As noted in my question, FF4.0 continually hangs (Not responding) even on your website.

http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
http://www.mozilla.com/en-US/firefox/all-older.html

Safari 4.0.3 + Flash Player Hang SBBOD Problem.

Hi, I feel like this is a bit redundant, but I've been skimming through the forums trying to figure out the answer to my problem.
My Safari was updated to 4.0.3 recently (earlier today, I believe), and now when I try to visit any site with flash-based content (youtube, certain news sites, etc.), Safari starts to hang and I have to do a "force quit". I followed instructions and was able to figure out that the Flash player plug-in caused the hanging/crashing problem.
As far as I know, I have the latest updated plug-ins. Also, I don't have any other plug-ins installed besides the default ones (my MBP is fairly new, I got it around 2 weeks ago. This is very annoying, considering that Safari was working just fine 8 hours ago (since I was still able to view flash-based websites without the hang problem).
Right now I've disabled plug-ins to avoid the hang, but it's really a nuisance and I can't figure out why the problem is happening. My best guess is that it has to do with my updating Safari from 4.0.2 to 4.0.3, but I'm no tech guru.
I'd really appreciate the help! I'm posting my latest crash report in the post below!

edit: I decided to reboot my machine just in case and now Safari is working just fine. If it hangs again I'll edit this post...
Message was edited by: roboslant

Burner not working, 8.98 GB free, can this 2003/2004 imac model be cleaned for better use or will I continue to have problems? Do I need to just buy a new one?

burner not working, 8.98 GB free, can this 2003/2004 imac model be cleaned for better use or will I continue to have problems? Do I need to just buy a new one? I remember with a PC being able to defrag.

You could buy an external dvd/cd drive.
Suggest other world computing.
You need to delete some files. Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
(0)
Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
Go after large files that you have created & know what they are. Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
(1)
Run
OmniDiskSweeper
"The simple, fast way to save disk space"
OmniDiskSweeper is now free!
http://www.omnigroup.com/applications/omnidisksweeper/download/
This will give you a list of files and folders sorted by size. Go after things you know that are big.
(2)
This will save you a gig of space.
Monolingual is a program for removing unnecessary language resources from Mac OS X,in order to reclaim several hundred megabytes of disk space. It requires at least Mac OS X 10.3.9 (Panther) and also works on Mac OS X 10.4 (Tiger). It worked for me on 10.4
http://monolingual.sourceforge.net/
A detailed write-up on how to use Monolingual:
http://www.jklstudios.com/misc/monolingual.html
(3)
These pages have some hints on freeing up space:
http://thexlab.com/faqs/freeingspace.html
http://www.macmaps.com/diskfull.html
(4)
Buy an external firewire harddrive.
(5)
Buy a flash card.

System Hang up problem in CS-5 (5.0.0 and 5.02 both ver.)

System Hang up problem in CS-5 (5.0.0 and 5.02 both ver.) I have HP machine with i 7 windows 7 and 8GB RAM. Here I'm pasting information from windows application errors:
09/24/2010 1:43PM Description A problem caused this program to stop interacting with Windows. Faulting Application Path: C:\Program Files\Adobe\Adobe Premiere Pro CS5\Adobe Premiere Pro.exe Problem signature Problem Event Name: AppHangB1 Application Name: Adobe Premiere Pro.exe Application Version: 5.0.2.0 Application Timestamp: 4c731297 Hang Signature: db9d Hang Type: 0 OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 1033 Additional Hang Signature 1: db9d73861cc870992719a1805a937a6a Additional Hang Signature 2: 54f8 Additional Hang Signature 3: 54f896ba0ceb58b7b8c95873e69e4a38 Additional Hang Signature 4: db9d Additional Hang Signature 5: db9d73861cc870992719a1805a937a6a Additional Hang Signature 6: 54f8 Additional Hang Signature 7: 54f896ba0ceb58b7b8c95873e69e4a38 Files that help describe the problem AppCompat.txt Adobe Premiere Pro.exe.xml WERInternalMetadata.xml memory.hdmp minidump.mdmp View a temporary copy of these files Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Hi,
if you post message, it would be great if you could include more information on the errors you are encountering. "startsap does not work" is not useful to give advises. You also may have get a quicker answer if you split up your long messages into smaller ones. In the middle of the text I found a simple question:
How will I create the db2support file? Can you give me the command for this?
Just use the db2support tool, which is described in detail in the DB2 documentation.
I know that multiple customers has managed to setup SAP on DB2 using HACMP. In addition some customers use the new Tivoli System Automation for Multiplatforms (SAMP).
Oh, I currently see that your message is from last year. I suppose you have solved the problems already.
Regards, Jens

Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

My iPhone5 is under warranty but during incoming call handset is hang. this problem 2-3 time a day. pleas help.

My iPhone5 is under warranty but during incoming call handset is hang. this problem 2-3 time a day. pleas help.

I'm experiencing what is I believe to be the same issue with my iPhone 4, and have been suffering in silence for about a week.
iPhone 4 model MC603X with Modem Firmware 04.10.01, 16Gb, cheap silicone cover, Vodafone NZ as my carrier.
My screen locks after 1 minute of inactivity as it should with my settings. Perhaps 1 call in 5, or 1 call in 10, the screen wakes up and displays called ID information etc correctly, but I cannot swipe to answer the call. The touch screen simply fails to respond.
If I push the power button briefly to silence the ringtone, this does not make a difference. The iPhone has to be locked (and screen turned off), then push a hardware button to wake up the display, and then I can swipe to unlock the device.
This is only since iOS 4.3 and unfortunately iOS 4.3.1 has not changed this behaviour.
Any advice appreciated.
Cheers, Mike

I continue to have problems with links in email, they don't Work.

I continue to have problems with links in email, they don't work. When I called apple support she said to hard boot by holding off and home keys and restart. However this is only since the new release of the operating system, it happens ever day and it's getting OLD.. Any solutions?

Yes, almost daily since the iOS update. Is there a permanent solution. And does the hard reboot hurt the iPad?

Skype continuously hanging on one PC

Hi all,
on my laptop Skype is continuously hanging.
During a text chat I see quite often that the skype windows freezes and I have to wait 5-10 seconds before it gets back to normal and I can type messages.
During a video call if the same thing happens the call is dropped and I have to start a new one.
I tried updating the drivers of the display and IE to 11, since i saw similar posts, but it didn't help.
I am using Windows 7 SP1, 64 bits.
Can you please help?
Thanks,
Francesco

Thanks Caprelous for your reply.
During a video call i saw Skype process going up to 25% of CPU usage.
While in idle it's 0%.
I ran the dxdiag and I am attaching the output.
Thanks again for your help.
Francesco
Attachments:
dxdiag.zip ‏16 KB

"Hang time" problem continues... Diagnostic advice anyone?

Hi, I posted another thread on this and the issue remains
unresolved... I also don't know if it is an OS 9 'system' vs
hardware problem but here's a summary of what's happening.
On a dual boot MDD 1.25, which i normally boot/use OS 9 on)
there is now a system 'hang time' of anywhere from 15-25 secs.
in various circumstances including:
1) Startup/Restart: Desktop appears, but the wristwatch icon indicates processing, and the startup doesn't fully resolve to where i can do anything(mouse/keyboard control/commands) for a lingering amount of time. At first it appears to be a freeze, but then ultimately system interactivity becomes functional, i.e, the cycle 'completes'
"eventually." In short there is a radically delayed response time which reminds me of the kind of behavior
you'd expect from bad memory chips. Still, i have swapped out both 512 Dimms and tried running with one or the other and the problem remained.
The problem also occurs specifically with a browser app,
(IE Explorer). Same scenario; command to open the application and get a delay of up to 20-30 seconds (wristwatch icon appears) before it ultimately 'resolves' and opens. Several other apps have shown the same behavior.
TechTools has been run, OSX Permission Repairs run/re-run..
and i've done an OS 9-only "restore/reinstall" of that
System. I also ran a defragmentation off of techtools.
Memory was 'tested' as okay.
My internal HD is a 160g, one large partition.
One sidenote. While my gear is all on high-end Tripp-Lite
power conditioners (this is a recording studio machine),
it seems to have started acting weirdly a few weeks ago,
after a day where i had multiple power fluctuations/outages.
after a stormy day where powe
i an not sure if this sounds 'symptomatic' of any one thing in particular.
I'm reluctant to bother reformatting/reinstalling everything if it isn't necessarily a software vs. hardware problem at
fault. Since it occurs within OS 9 and i did reinstall that
system, i would tend to think that rules out the System.
BTW, i can't detect any similar problem when running the OSX
system on here.
Not sure where to go from here with this... If anyone can
help, i would be most grateful.
Thanks,
Mike

I would look over Apple System Profiler logs for some
possible clues. (This may help if there is more of a USB related hardware issue, like keyboard or its hubs...)
Ron, thanks for the idea, but so far the problem is still a mystery.
I trashed the Profiler prefs and restarted. Same 'hang time.' - I can
describe it a little more clearly. In the case of a start-up/restart, the
desktop fully appears, the cursor is moveable, but the wristwatch icon
indicates some form of actity still processing and nothing can be done
for approximately 10-12 secs, at which time, after the watch icon blinks
off the screen, control is 'released' and i get mouse/keyboard control.
Here's another observation. I do hear a definite 'swooning' of the drive
during this hang period...(as if it's accelerating...?)... Maybe i've just
never paid attention. AFAIK this machine is generally pretty loud.
"My internal HD 160g, one large partition.
My personal take is that I do not believe Mac OS 9
would run efficently on a HD with that wide open
capacity. First of all the ATA controller needed a
48-bit Logical Block Addressing (LBA) "crutch"
to get it that far. My open question was Mac OS 9('s)
HD drivers written to actually do that?
Well, that may well be an issue, but i know that up until a week or two ago when i posted about this, the delayed-response problem wasn't
happening.
At this point i'm verging on having the hardware checked out tho if
there are any other ideas i'd gladly try them first. It's sheer speculation
that something's damaged internally and i don't know if a reinstall of OSX
makes any sense since the problem SEEMS to only be apparent within
the OS9 System environment...
If anyone can suggest where i might go from here, i'd be most grateful.
Mike

Skype first call/beeping/hang up problem

This is getting quite common with Skype on my Windows 8.1 laptop. What makes it worse is that I'm being charged for it.
It's becoming every other call now but when I dial a phone number on Skype, I get this beep that appears every two seconds. I'm not able to hang up the call and it's picked up but the person at the other end doesn't hear me through the microphone. The caller may hang up (this lasts for a minute if not more) and then they hang up. The call continues and then suddenly quit.
Has anyone else experienced this problem and what can be done to avoid it? I must have lost $20 in total due to this issue and it's become increasingly frustrating.
I'm running the latest version of Skype and it doesn't matter if its the App version of Skype or running from the desktop.
Best,
FAQ

There are a lot of reason why the call drops. You may want to contact Skype Live Support for them to check the reason why the call keeps disconnecting. They should see it on the back end. They can also perform troubleshooting to make sure that issue is not coming from your device or anything.
Skype Live Support Link:
https://support.skype.com/support_selection
Here's how to get to Skype Live Support:
1. Sign in to your account using that link.
2. Choose Technical Problems in Choose a help topic, then Calling Phones and Mobiles in Choose a related problem. The click on Next.
3. Click on Text Chat Support
4. Finally, click on Start
After following the steps, you should be connected to a Live Chat Support Specialist in no time.
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Firefox continually hangs even after trying the solutions listed here, and in other sites, and I can't find any common link to pinpoint what is causing it.

I love Firefox but I may have no choice but to try Chrome instead. Over the past couple of weeks the version of Firefox I have installed on my Lenovo Edge 15 latop (which is the most current version of Firefoxc), hangs several times an hour, for approx a minute each time. I have tried to locate the cause of the problem by eliminating the websites I commonly visit, but it seems that it does not matter what website I visit, it continues to happen. I have even tried loading Firefox in safe mode and it still makes no difference. And this problem is only affecting Firefox, and none of my other programs are affected. I have used resource monitor to try and locate the problem and, when this problem occurs, Firefox is reported as taking up 25% of CPU consumption. I am using Windows 7.

I have a Mac and have tried the suggestion above with the places.sqlite but it DID NOT HELP! FIREFOX IS STILL HANGING!!!!!!!!!!!! I've been a real fan of firefox for several years, but lately it's just plain annoying!!! I have to force quit FF several times a day. I THINK I'M GOING TO SWITCH TO SAFARI until you guys get your act together soon :(

How do I fix my hang up problem

== Issue
==
I have another kind of problem with Firefox
== Description
==
every since I updated my Flash player to adobe10.045 fox fire has been hanging up loading most web site and or page. It can take as long as 5 hour to get a page loaded completely I have followed all of you suggestions on how to correct this problem I have even uninstalled and reinstall firefox twice. with no change in results. After a reinstall fire fox many load correctly for a few hours but if I shut off the comp. when I log back on I am back to the start of slow loading and total hang up to the point I must use Windows task master to shut done Fire Fox
== This happened
==
Every time Firefox opened
== April 30, 2010
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Microsoft .NET Framework Assistant
1.2.1
true
{20a82645-c095-46ed-80e3-08825760534b}
Java Quick Starter
1.0
true
[email protected]
Modified Preferences
Name
Value
browser.history_expire_days
3
browser.history_expire_days.mirror
3
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
( .NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
network.http.proxy.version
1.0
places.last_vacuum
1274235964
privacy.cpd.downloads
false
privacy.cpd.formdata
false
privacy.cpd.history
false
privacy.sanitize.migrateFx3Prefs
true
privacy.sanitize.timeSpan
0
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729)
== Plugins installed
==
*-Default Plug-in
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*MetaStream 3 Plugin r4
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object

Hello Dorothy.
This kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
#run Firefox in safe-mode to disable all extensions and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
#update all extensions and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
#disable all extensions and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
#enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. When you encounter the problems, you know you've found a problematic extension, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
#you're done! You've fixed your problems with problematic add-ons.
Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
#do a virus/malware check on your computer. If this doesn't fix it, proceed;
#disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
#check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
#check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't work, proceed to the following point;
#clean up your OS registry, using appropriate software. If this doesn't do it, I'm out of ideas. Except make sure you've followed my instructions correctly.

Please help me figure out why Firefox is hanging - with problem signature

Hi, I am having a repetitive issue with Firefox where it just freezes up ("not responding). Most of the time it never responds and I have to just shut it all down and restart. When I do this, even though I click the option to check for a solution and close the program, it thinks for a second and gives me the following "problem signature" but it doesn't inform me of any solution. Here is what it usually says:
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 31.0.0.5310
Application Timestamp: 53c75e91
Fault Module Name: mozalloc.dll
Fault Module Version: 31.0.0.5310
Fault Module Timestamp: 53c72e91
Exception Code: 80000003
Exception Offset: 0000141b
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
**Except this last time, it instead said:
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: firefox.exe
Application Version: 31.0.0.5310
Application Timestamp: 53c75e72
Hang Signature: 6fe5
Hang Type: 0
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Hang Signature 1: 6fe5a46c27c960d6794641adcb9f9725
Additional Hang Signature 2: 3ecb
Additional Hang Signature 3: 3ecb099458780b94b15832cd5ce3bb6a
Additional Hang Signature 4: 6fe5
Additional Hang Signature 5: 6fe5a46c27c960d6794641adcb9f9725
Additional Hang Signature 6: 3ecb
Additional Hang Signature 7: 3ecb099458780b94b15832cd5ce3bb6a
Then a box pops up and says "Plugin container for firefox has stopped working" and the problem signature is:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 31.0.0.5310
Application Timestamp: 53c75e91
Fault Module Name: mozalloc.dll
Fault Module Version: 31.0.0.5310
Fault Module Timestamp: 53c72e91
Exception Code: 80000003
Exception Offset: 0000141b
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e78
At this point firefox totally shuts down and does not restart unless I open it again. When this happens I get the "this is embarrassing" screen where I can uncheck or leave checked what I want to be restored. I will point out that I usually have a few windows and multiple tabs in each window open at any given time. I don't know if this factors into it because I never only have one window or tab open to compare it to. I also generally leave them open even when I close my laptop so basically they stay open until the next time is crashes. Maybe this is the issue? Not sure. I also sometimes get an error type message about a script not working right. The most recent one is:
"Script: chrome://global/content/bindings/tabbox.xml:734"
I only use Firefox generally, browser-wise. I am using IE to post this because Firefox just keeps freezing and when I try to restart it and re-open the previous windows I had open, it freezes again. I do not have Chrome or any other browser installed. I love Firefox!
Thank you for any help you can provide. I skipped over some of the recommendations that are generally suggested before posting a question but they all would have involved scrapping the many tabs I have open and then I would lose all of them because they aren't bookmarked. I hope that doesn't sound really stupid. I'm (obviously) not super technically inclined when it comes to the internet. Thanks again for reading this and I would very much appreciate any input.
Oh and I am using Windows 7 and I think the Firefox version is 31.0
Thanks!!!!

Try to create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Win7 black-screen-hanging-cursor problem on brand new rMBP

I am sorry but a face a problem similar to (surprisingly) many in this thread.
I have a brand new rMBP 15'' with bootcamp Win7 installed (90GB partition). Installation went painless ONLY with a fresh Yosemite 10.10.3 installation, otherwise I fell into said black screen-hanging cursor trap already during installation. After installation I could enter Windows and install some software there. Upon re-boot, black-screen-hanging cursor in top left problem.
Here is what sudo gpt -vv -r show /dev/disk0 says:
gpt show: /dev/disk0: mediasize=1000555581440; sectorsize=512; blocks=1954210120
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1954210119
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1772843400      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1773253040     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1774522576        1840
1774524416   179685376      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1954209792         295
1954210087          32         Sec GPT table
1954210119           1         Sec GPT header
And here for sudo fdisk /dev/disk0:
Disk: /dev/disk0    geometry: 121643/255/63 [1954210120 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AC 1023 254 63 - 1023 254 63 [    409640 - 1772843400] <Unknown ID>
3: AB 1023 254 63 - 1023 254 63 [1773253040 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1774524416 - 179685376] HPFS/QNX/AUX
Any help greatly appreciated

If you built a USB using BCA and Windows ISO/DVD, it will show Windows and EFI boot both as options, when Alt Key is held.
W7 USB has the following structure .
W8+ USB has the following structure.
Does the behavior change if you
a. Resetting the System Management Controller (SMC) on your Mac - Apple Support
b. How to Reset NVRAM on your Mac - Apple Support

IPAD3 continuous hang Up Problem

Similar Messages

Maybe you are looking for