IPad3 stopped some sounds only when muted

For some reason, my new iPad stopped working for sounds only on some video playback, others work.  alarm app doesn't work.  This is with sounds muted, which is how I have always used.  This is a recent change.  Some video will start with a blurb of sound, then go quiet

Try Googling about your problem, if no solution comes up go to the Genius bar if you're residing in the US. If you aren't in the US go to the nearest Apple Store.

Similar Messages

  • How do I stop the sound (bong) when i receive a new email even though my settings are set to vibrate only?

    how do I stop the sound (bong) when i receive a new email even though my settings are set to vibrate only?

    Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.
    You can check the properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Command+B on Mac).
    In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
    Make sure that "Load this bookmark in the sidebar" is not selected.

  • Stop some unnecessary services when system boots

    how can I stop some unnecessary services when system boots? I tried to find this function in the control center, but it looks we can modify the services list directly in the control center.

    edit the DAEMONS= line in /etc/rc.conf

  • My mac book pro just stopped allowing sound and when i restarted it, it does not let me use any of the icons on the desktop, then allows me to use them after 3 minutes,and then still NO SOUND! What do i do? PLEASE help.

    I have an issue with my computer.  the volume was working fine on wednesday june 29th 2011 (thats the last I could remember) and today is july 3rd 2011.  so when I start the computer up it does not let me play anything trough the iTunes volume when I start a song it goes immediately to pause but no sound comes out.  When I click on the volume in the menu bar it does not allow me to raise the volume up, nor does it allow me to play volume through my speakers when I am on youtube.com. AND when I go to system preferences it has checked off that it is on mute, BUT  it is a light gray color and it does not let me check the setting off.  please help! what do I do? I think it is still under warranty because it is only between 11 months-12 months old.
    *******************************************************ANY ADVICE WOULD BE APPRECIATED THANKK YOU!*************************************************************

    That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
    Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
    Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
    Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific)

  • Headphone sound only when changing level or balance

    Hi,
    I have a weird problem with my Logitech B530 USB headset.
    I have configured it as the main input and output device in system settings, but I only hear sounds when changing sound level or balance. So if I e.g. start some music in iTunes I hear nothing, if I then increase/decrease the volume I hear the song, but the sound quickly fades away and there is no sound again. The same thing happens if I change the device balance.
    Has anyone experienced anything similar and/or have any idea how to fix this?
    Thanks,
    Mads

    = Yes it came pre-installed,? it's an x-fi xtreme music, is there any other way to find the exact model? Im pretty sure my card is upside down so It would? be impossible to read the serial number which is on the bottom. It doesn't seem to be a hardware issue at all, it seems to be a software [email protected]

  • Audigy 2 ZS - Stereo Sound Only When Testing Speaker Setti

    I am running Windows XP SP2 and have a Logitech Z-5500 hooked up through a co-ax connection. I had?no sound problems until I?ran Creative Auto Update and updated the recommended software (Creative Media Source Player 5.0.38 and driver version 5.2.4.96) yesterday. While I am still able to hear?5. channel DVD's through all my speakers, when I run the Creative Speaker settings software, I only hear sound from my front left and right speakers.
    I only get sound through the centre channel when watching TV, which?echoes. ?I tried running system restore to get back to my previous drivers, but the system was unable to restore itself. Any help would be appreciated.

    Forgot to add, all of my speakers are in working order, I have individually tested them. I have set my 7.1 system up before in my old apartment, it's just not working this time. Thanks again.

  • Sound only when "Solo'ed)

    Hey. I'm finding GB very frustrating. I've been doing this for years w/Cakewalk but...anyway...I have many questions but the immediate frustration is: NO sound in my project unless I "SOLO" every track. I got very nervous & tried another song (project) and that one worked!! Any solutions? The next question will be "Can't you "mixdown" 2 or more tracks to 1? You must be able to....and that goes along with "Can't you layer recordings on a single track? instead of replacing what's already there? I'll settle for an answer to my 1st question. Thanks so much guys.....

    that is the only way I've seen this issue manifest itself. i would try creating several real and software tracks, and toggling the solo buttons, just for kicks.
    also, though it does not fit what you have described, try toggling the Ducking menuItem

  • Notification sounds only when I get email from address book contacts

    I am getting constant sound notifications whenever I get email but very few emails really require instant attention. I do not want to hear a sound when I get an email, except when the sender is one of my contacts. What settings do I need to make this happen? Thanks.

    OK, perhaps I see the problem now.
    Outgoing Mail Server: smtp.gmail.com
    http://email.about.com/od/macosxmailtips/qt/et_gmailosxmail.htm
    http://islandinthenet.com/2009/05/08/how-to-setup-leopard-mailapp-to-use-gmail-2 /

  • Sound only when Importing QT

    Hi there,
    I have tried to import a QT clip that was done with FCP7, it opens and plays fine on my desktop but when I import it either via import or by dropping into FCPX, I end up with just the sound, Can anyone assist me please.
    Regards,
    John

    What codec is it?  There is an issue with oder QT files from legacy which were created in the QT framework, as opposed to FCP X which now creates/uses them with the AV Framwork.
    Use QT Player or Compressor to transcode to ProRes 422.

  • Track ball has decide to stop working or only when it feels like it

    hi please help
    the track ball on my 9300 has stopped working i have taken battery out and rebooted but still no good any ideas please x
    Solved!
    Go to Solution.

    Hello !
    Your problem seems to be more like a Hardware problem rather then a software problem.
    So would request to visit your neares Authorised BlackBerry Service Centre, for handling of the issue.
    Hope this resolves your Problem!
    If your problem has been resolved then would request you to Click on "Like" and accept as solution so that other Advisors doesnt invest there time on this Message anymore.
    Thanks.

  • Stop & Start Sound

    I created a flash presentation with voice over and animated
    graphics. I want to add "start" and "stop" buttons that start and
    stop both the graphics and sound.
    So far I can only:
    1. start and stop frames, but the sound keep going or
    2. start and stop the frame animation and stop all sounds but
    when it starts again the sound isn't there.
    So, all I want to do is be able to do is start and stop the
    presentation and have the sound and animation continue from exactly
    where I stopped it.
    Any suggestions?
    Thank you!

    well you probably have the sound on the timeline correct?
    this will make it hard to control the sounds in the application
    just as you are experiencing here, and perhaps you should consider
    using a Sound Object instead. using the Sound class you can start
    and stop the sound(s) at any time, track the position of the sound
    and restart it again from that position using methods of the class,
    it will take a little more doing but it's the way to go.
    HERE
    is some basic information on the Sound class, but in addition look
    it up in the Flash Help Manual>ActionScript>AS language
    Reference>AS classes>Sound - here you will find infomation on
    the Sound.position property, that you will 'read' and assign to a
    variable when the sound is stopped - however the return is in
    milliseconds - so when using the Sound.start() method - you will
    also want to pass the first parameter in seconds (so divide by
    1000) as in Sound.start(pos/1000); this will restart the sound at
    the last position. call these types of methods from your buttons as
    you stop and restart the timeline.

  • I started making a movie and all was well. I added a few more pictures and some sound and played it back. It plays so far and then the pictures break up into colors and then the screen turns green.  The sound continues.

    I am making a movie from still pictures. I used no theme and then started adding pictues. When I played it back, all was well. Then I added a few more pictures and some sound. When I play iot back it plays just so far and then the sound continues, but the screen turns green or the pictures break up into colors.

    Sorry, everyone.  I think I may have figured out what it was all down to...........
    I had left the IDE ribbon cable plugged into my third HDD, with the power cable unplugged.  I did this so as not to endanger my years of work on the third drive, until Windows had setup.  I have in the past, accidentally chosen the wrong partiton to format, so this seemed a good way to avoid it from then on.
    This was not a problem on my old system, but it seems this system doesn't like it.
    I must have left the drive completely unplugged, the times Windows did setup.  Amazing really.  I couldn't see the woods for the trees.
    Anyway, I'm sorry to have bothered everyone with my problem.
    Cheers
    Marcus
    edit :   Sorry Syar2003, I didn't see your reply until I had posted mine.  Many thanks for taking the time to try and help me, it seems as though I may have sorted it now.  I am using IDE drives until I can afford SATA.  But many thanks for the heads-up on the NF4-SATA compliance, I'll be sure to bare that in mind.
    I didn't actually check the NVRAID/IDE ROM version before updating the bios, so I have no idea if the revision was changed when Liveupdate flashed the Bios, I'm afraid.  I didn't know they would be updated at the same time.
    Again, cheers
    Marcus

  • Sound only comes out from earphones

    Sound only when using earphones - can  you tell me what the problem could be. 

    When you remove the earphones and try to raise or lower the volume with the buttons, what is appearing on the screen? Do you see the speaker picture and the volume raise and lower? Just above the speaker, what does it say? If it doesn't say ringer, then there is something obstructing the headphone jack. Try inserting and removing the headphones a couple of times. If that doesn't help, then use a toothpick and see if you can remove any lint in the headphone jack. Generally a small piece of link will cover the sensor that tells the phone the headphones are plugged in.

  • Apple TV stops streaming via AirPlay when iPhone 6 Display goes black

    Hi,
    when my iPhone gets locked and the Display goes black (standby) after 2 Minutes, my AirPlay stream to my Apple TV 3. Gen stops playing. Only when i set the standby/lock time time to never instead of 2 Minutes (and the screen is on all the time) the Stream wont stop.
    Sometimes the stream does not stop, wenn my iPhone Screen goes black.
    This also happens with an iPad Mini or using an Lightning to HDMI Adapter instead the Apple TV.
    I have no idea why.
    Please help.
    Best regards
    Sebastian

    On a sidenote, I also have an ipad and normally homesharing with the ipad works fine, but after having an apple tv incident, I have to restart the mac for homesharing to work with the ipad

  • For certain songs on my iPhone 4s with iOS7 some songs stop playing audio but continue playing the song almost as if it were muted. Where can I fix this? Say "Stronger" by Kanye West stops playing sound after 2:25 but it is 5 minutes long.

    Basically it is just like it says. Certain songs stop playing sound after a certain point in the song but the song continues playing and ticking down like it normally would. Does anyone else have this problem?

    Hi I found the answer from another post. So far everything is working find. I been trying to fix this since march,
    from
    Mike N. (nahyun...
    Posts: 2,814
    From: New York, NY
    Registered: Oct 1, 2003
    Re: itune application and itune folder
    Posted: Jun 27, 2007 7:16 AM in response to: Austin Smith2
    Solved
    Reply Email
    Deleting the application rarely solves anything on Macs. A better starting point is normally to delete the preference file for the application (in Users/~/Library/Preferences/com.apple.itunes.plist) or see if you have the same problem in another user account on the computer.
    PM MDD(1.25GHz 1.25G-RAM 320G-HD) Mac OS X (10.4.10) 20"ACD USB2Connect MacBook (2.0 White)-2GB Report this post
    Austin Smith2
    Posts: 118
    Registered: Oct 31, 2001
    Re: itune application and itune folder
    Posted: Jun 27, 2007 12:51 PM in response to: Mike N. (nahyun...
    Reply Email
    Mike, deleting the preferences did the trick, but I don't know why. Itunes downloaded 5 days of podcast! Hurray!! Thank you!!!!!!!!!

Maybe you are looking for