IPad4 iOS 7 display won't do portrait

Recently updated to iOS 7 on ipad4,
now my screen in any app be it Facebook or solitaire, even in the iPad settings screen is stuck on land scape,
No I don't have the screen lock on lol
Though when I do toggle it on off the screen briefly pivots to portrait then back,
only screen not effected is home screen, which is stuck on portrait and won't do landscape?
Any help appreciated.

Solution found, reset iPad by holding down home and lock buttons for ten seconds, lets iPad reset with no loss of data, solved my issue

Similar Messages

  • TS3274 My Ipad display is stuck on portrait mode. I tried the toggle switch, turning off and restart and just now backed up into Itunes and restored and still is stuck on portrait mode and it won't flip to landscape mode. Is this a hardware problem?

    My Ipad display is stuck on portrait mode. I tried the toggle switch, turning off and restart and just now backed up into Itunes and restored and still is stuck on portrait mode and it won't flip to landscape mode. Is this a hardware problem?

    Has lock rotation been accidentally enabled within the control centre? If you swipe up the screen is there a circle with a lock symbol & if so is is greyed out or white - if white it is enabled.

  • IPhone 4 (with iOS 5.0) won't go to Landscape while taking photos/videos EVEN IF PORTRAIT ORIENTATION SETTING IS NOT LOCKED! However, watching YouTube/Videos is stuck on LANDSCAPE!

    My iPhone 4 (with iOS 5.0) won't go to Landscape while taking photos/videos EVEN IF PORTRAIT ORIENTATION SETTING IS NOT LOCKED! However, watching YouTube/Videos is stuck on LANDSCAPE!
    I was getting this even on iOS 4.0, but under this OS, I can restart the phone, and in some cases, this problem goes away.
    However, under iOS 5, it simply wouldn't go to LANDSCAPE. Photos is not a worry, since I can just rotate this, but videos is now stuck on Portrait!
    Again, the PORTRAIT ORIENTATION SETTING is NOT LOCKED! But it still wouldn't go to Landscape.
    Is this some sort of a "gyroscope" problem??
    O

    Sorry, but you are mistaken about both observations.
    You CAN DEFINITELY take photos in Landscape and you CAN DEFINITELY watch YouTube videos in PORTRAIT (just tried it now using my sister's working iPhone).
    Also, my CALCULATOR does not go to LANDSCAPE (i.e. from normal to Scientific) automatically.
    So I still think it could be a gyroscope problem...but I'm not 100% sure.

  • MBP display won't stay off, wakes from sleep

    I have a newish 15" MBP, 1680 display, hooked up to a Dell external monitor when it's at home. When I go to bed I cut power to the display via control-shift-eject, but generally don't put the computer to sleep overnight.
    With this new machine, after it's been running for a while (as little as a day, or as long as a couple weeks), the displays will come on again in the night. Once this happens, the displays won't stay off for longer than about five seconds. If I then put the machine to sleep, it'll wake itself up minutes or hours later (generally not long enough to miss a Time Machine interval). The only cure is rebooting.
    I tried an SMC reset, but that fix only lasted about as long as any other reboot.
    I've since tried systematically removing every peripheral (a USB hub, the external display, any directly-connected iOS devices) and testing display-off after each; no change. I've turned off my Bluetooth keyboard and mouse, then disabled Bluetooth on the computer, turned off wifi, quit every menu extra (jitouch, Viscosity, Dropbox, Pastebot, Fastscripts, Transmit, Teleport), and quit every running application. The problem remains repeatable after every step.
    It's repeatable at the moment — any suggestions for other things to try, preferably short of the reboot which temporarily masks the problem? I'm a little concerned that it's going to manifest at some point while I have the laptop sitting in a bag, which will then cook itself.
    I'm on 10.6.4 now, the problem started on 10.6.3.
    Thanks.

    Try checking the system logs in Applications/Utilities/Console.app for clues. The entries carry time stamps. Usually a wake event will leave some trace. By matching time stamps to the time of occurrence you may find the culprit.

  • Ipad4 locked with display showing iTunes logo

    IPad4 locked on display of iTunes logo

    Try the troubleshooting help here > iOS: Not responding or does not turn on

  • Macbook (2.1Ghz white 2008 model) display won't turn on during start-up

           hi all,
    my problem is pretty simple.
    Sometimes, after having used an external display with my Macbook (using the Apple Mini DVI > DVI adaptor: http://store.apple.com/au/product/M9321G/B?mco=MTY3ODQ5OTY ) the Macbook's own display won't power on during the next boot-up. I can hear the hard-disk start up, and the system boot, and I'm even able to navigate my way into the user login and shut the computer down (all via the keyboard). So the computer is definitely powering up (and in a seemingly normal way), but the display isn't.
    For example, last night I was using an external display with my Macbook. This morning I plug the display back into my Mac Pro, then power-up my Macbook. But the Macbook's display won't turn on. It's as though it thinks the external display is still plugged-in. I know, that if I re-connect the external display, the Macbook's login page is displayed, but only on the external screen.
    The problem only arose after I started using this particular external display (a cheap 22" BenQ, model G2222HDL 'senseye 3'). I wouldn't normally use the display with my Macbook, but my Mac Pro has a **really** noisy optical drive (CD/DVD), which makes watching films pretty unbearable (if you're into sound anyway, which I am).... so until I get my Mac Pro's drive sorted (when I have a few spare days when I won't be needing it), I'll have to continue using my external display with my Macbook to watch films.
    My Macbook's specs are as follows:
    2.1Ghz Intel Core 2 Duo Macbook (2008 model - I think, maybe 2009?)
    4Gb RAM
    Running OS X 10.5.8
    Are there any known display issues with these models of Macbook? Or are there any software/firmware updates that address any display issues?
    In general, I don't update the software/firmware unless I need to, or unless something doesn't seem to be working properly.
    However, I've just checked Software Update, and noticed there is an SMC firmware update (1.4). So I might give that a go and see if the problem persists.
    However, the problem is intermittant, and kind of unpredicatable, so I might not know for a while if it solves the problem or not.
    Has anyone else had a similar problems?
    Alternatively, is there a possibility there is some kind of virus or file-corruption causing this problem?
    My girlfriend has a similar model of Macbook (which she's never had any problems with). Recently I moved a whole bunch of files from my Macbook to hers, and she noticed that hers had a similar issue starting up, where the display failed to turn on.... so it seems like
    a) it might be a common-ish problem in this model of Macbook
    or
    b) perhaps I've got some kind of virus on mine?
    I've been using Macs for about 15 years (yet, I don't consider myself a computer expert, when it comes to the technical details). In those 15 years, viruses have never really been a concern to me, as I've never really thought they were much threat to Macs. However, I guess, as Macs get increasingly more popular, there's a possibility people will write more Mac-specific viruses...?
    Anyway, I'm open to suggestions : )
    Regards,
    Sam
    PS I've tried:
    -re-starting the computer multiple times (which sometimes works, but usually doesn't).
    -re-setting the SMC (which usually works, but not always)
    -plugging/un-plugging the external display to try and jog the computer into noticing it isn't connected (which doesn't work)

    let me ellaborate on this part:
    "b) perhaps I've got some kind of virus on mine?"
    I mean, " perhaps I've got some kind of virus on mine, and I've passed it on to hers?"

  • External display won't work on Window

    Hi can anyone please help me in this? when I using window XP, my external display won't display out but when I'm using MAC OS X it work well, why? please help... Thanks

    I can only help if you are using an NVidia graphics card, as with that you can use the NVidia Control Panel to setup the external display.
    Connect the display
    Start NVidia Control panel
    Select the Display icon
    Then select Change Display Configuration
    There you can set the resolution, extend the screen or create a copy et.c.
    Hope that helps...

  • My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES. Maybe this is because of the new release ios 8.1 where after the update it went recovery mode then i didn't restore, i set up a new ipod. What's wrong? Is ths bcoz of ios 8.1?

    My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES.
    Maybe this is because of the new release ios 8.1 where after the update it went
    recovery mode then i didn't restore, i set up a new ipod.
    What's wrong? Is ths bcoz of ios 8.1?

    How do you do that
    lllaass wrote:
    Try:                                               
    - iOS: Not responding or does not turn on          
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • After upgrading to iOS 5, apps won't start on my iPhone 4 !!

    Does anyone know why on earth such crash occur after upgrading to iOS 5, apps won't start on my iPhone 4 !!

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Also, See Here...
    Troubleshooting applications purchased from the App Store

  • My display won't go to sleep

    I just recently upgraded to the Mountain Lion OS and now my computer won't go into the screen saver (set at 10 minutes) and the display won't go to sleep (after 15 minutes).  It is on all the time.  Any suggestions?

    Same issue in ML (sorry for continuing this thread here).
    Please let me know if you figure this out. I have tried SMC/PRAM resets, disk permission repairs. Nothing.

  • Help please. Extended display won't work on MBP and AOC 20" 1600 x 900  60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

    Help please. Extended display won't work on MBP and AOC 20" 1600 x 900  60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

    I have the same mini display port adapter and Belkin DVI-HDMI cable (but a Panasonic 42" Plasma HDTV) so just set this up on it to see if I could duplicate your problem, unfortunately for you (but good for me) I can't.
    I connected the adapter+HDMI cable before switching the HDTV on and then powered up the MBP. It (the HDTV) came up with my background right away (it's set at Mirror not extended Desktop) and when I run System Preferences/Displays get the following. Sorry but all I can confirm is that adapter+cable combination should work ...
    Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys?

  • Display won't wake up

    It's a brand new notebook.I've done nothing on it, other than installing Windows updates and creating recovery disks.I set the "Turn off display after" option to 1Minute.IMPORTANT: I set display brightness all the way to zero, the lowest setting possible, using either the keyboard keys, or the brightness option in Windows.Leave the notebook idle for a minute, the display sleeps like it should (the notebook is set to sleep after 30 minutes, it's only the display that sleeps, the notebook is still awake).Move the mouse, press keys on the keyboard, the screen does not come back up. The computer is still up and running-i can toggle keyboard backlight On/Off using the keys, but the display won't wake up.Press the "Brightness +" button on the keyboard, the display wakes up. This is the only way to wake it up. The other option is to press and hold the power button, force a shut down, and start the computer again.This happens ONLY when "brightess" is set to the lowest level. If brightness is set to even one level above the lowest, the issue cannot be reproduced. Moving the mouse or pressing any key on the keyboard will wake the display up in this situation.Both Intel HD graphics 5500 and GTX 850M drivers are up to date.BIOS is up to date as well.Battery/ Plugged in does not make a difference. If the display brightness is set to lowest, the screen will ALWAYS fail to wake up, irrespective of which power source is in use. What do I do? Please don't tell me it's a minor problem and I have to live with it.There are so many minor problems with this notebook, and all these are adding up to make it a total piece of cr.. My almost 5 years old probook with a second generation core i3 CPU and no discrete GPU, is better than this brand new 5th generation core i7+GeForce GTX notebook. I'm beginning to regret this purchase. I should have gotten another probook. Thought the Envy offers a better "bang for the buck", and now i think this was a huge mistake. Anyway, any idea how i can get this fixed? Looks like a driver problem right? Or is this a hardware problem? Can someone with an Envy notebook try this out and tell me if the issue can be reproduced on their rig? It can't be reproduced on my Probook.Thanks.

    Thanks for your reply Avenger Well, I called up HP tech support.The lady took remote control of my notebook and tried numerous things in the registry (regedit).But the issue could not be solved. She then arranged for an on-site support engineer to visit my house.The Engineer showed up right on the next day, and tried the following:- Updated ALL drivers, even the ones which were already up to date!Checked with my desktop monitor, the issue cannot be reproduced on the external monitor- the external monitor will wake up on moving the mouse, but the notebook monitor stayed dim (no backlight).Opened the laptop, took out the display cable, cleaned it with some solution he had, put everything back together- issue not resolved, external monitor wakes up but notebook monitor stayes dimmed. This is not the only problem I was having with the notebook, the other problems are:Battery would stop charging when the notebook is switched OFF, and the charger is turned ON and OFF a couple of times.The battery lock doesn't "click" in place, it slides automatically to the "unlock" position, it's loose.There's a dead pixel on the display. He offered me two choices: 1> Replace motherboard (to solve battery not charging issue), replace chassis (to solve the battery lock issue), and replace display panel (to solve the dim display + dead pixel issue). =======OR======= 2> Return the whole notebook back to HP, and get a new notebook (same model) in exchange.  I picked option 2. We shared a cup of coffee, and the tech left (he was very nice and friendly). The next day, I got an email from HP, with a PDF attachment, asking me to take my laptop, along with a hard copy of the email, and payment invoice, to the HP store. HP store took my computer back, but they didn't have a replacement ready, they asked me to come after 7 days to pick up a new notebook (same model). I really loved my Envy. It's a very nice looking laptop. Hope the replacement I get won't have these weird issues. I'll update the thread when I get the replacement. Thanks for your help   

  • Display won't sleep after being in suspend once.

    When rebooting the computer, the display sleeps after set interval and can manually be put to sleep using shift+ctrl+eject.
    However if the computer goes to sleep or I myself close the lid to make it sleep, the display won't sleep again.
    The display won't sleep after set interval in power settings and when I press shift+ctrl+eject the keyboard backlit turns off but the screen stays on.
    The only way to make it sleep is to close the lid.
    I have tried resetting SMC and NVRAM but to no avail.
    I have the first generation aluminium macbook.
    Does anyone else have this problem?
    I have had this problem both in 10.6 and 10.8
    Regards Robin Hansson

    When rebooting the computer, the display sleeps after set interval and can manually be put to sleep using shift+ctrl+eject.
    However if the computer goes to sleep or I myself close the lid to make it sleep, the display won't sleep again.
    The display won't sleep after set interval in power settings and when I press shift+ctrl+eject the keyboard backlit turns off but the screen stays on.
    The only way to make it sleep is to close the lid.
    I have tried resetting SMC and NVRAM but to no avail.
    I have the first generation aluminium macbook.
    Does anyone else have this problem?
    I have had this problem both in 10.6 and 10.8
    Regards Robin Hansson

  • Display won't sleep and screen saver won't sart

    I upgraded to the new OS and the display won't sleep and screen saver won't come on. Help please.

    Long shot.
    Do a backup.
    Quit the application.
    In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
    Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
    If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
    If you want to make your user library permanently visible, run the below command in Applications/Utilities/Terminal.
    chflags nohidden ~/Library/
    You will need to do that after any updates.

  • HT6162 iOS 7.1 won't update on my iPhone 5 it keeps coming up with a error message

    iOS 7.1 won't update on my iPhone 5 it keeps coming up with a error message

    Update your device using iTunes
    If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
    If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.
    Install the latest version of iTunes on your computer.
    Plug in your device to your computer.
    In iTunes, select your device.
    In the Summary pane, click Check for Update.
    Click Download and Update. 
    http://support.apple.com/kb/ht4623

Maybe you are looking for