IPAddress of the Clinet System

Hi,
I want to capture the IPAddress of all the Clients who are accessing my portal..
say who ever has accessed my portal called www.xxx.com..I need to capture all the IPAdress..Plez help me in this.
Thanx

Hi Mr. Krishna,
You can use the method getRemoteAddr() in the ServletRequest class.
Here is the link for details about this method.
http://java.sun.com/products/servlet/2.2/javadoc/javax/servlet/ServletRequest.html#getRemoteAddr()
Also, you can see the method getRemoteHost in the ServletRequest class.
Hope this helps !!

Similar Messages

ALE inbox of BI is identical to the ALE outbox of the source system

Hi experts
We have BW 7 on ERP (ECC) 6. We have BW and ERP TOGETHER on the same developing system. BW is designed on developing client 100 (it is future productive client on the future productive system). It is of course default "myBI" source system. Upload is correct.
But because data is only inside clinet 200 (in the same system) I must create SAP source system client 200. It is correct, RFC destination is corect, source system clnt200 is correct and active. But data I cannot upload from this source system clnt200 - IDOCs are not correct, BW monitor is yellow and message:
ALE inbox of BI is identical to the ALE outbox of the source system
Is mistake in situation "the same system - various clients and sourcesystems"? Do you have any experiences with BW on the same system with ERP 6 and client enviroment?
Thanks
Ales

Hi Ales,
The problem can often be caused due to missing authorizations with the background user used to receive the data in BW or
the background user in the source system that sends the data to BW. Please check the authorizations as per the note
150315 , sometimes SAP_ALL profile does not have the required authorizations so please check that the background users
have the profiles mentioned in the note 150315:
As per the note:
Reason and Prerequisites
a) In the BW there exist two user:
   i) a human administrator, using S_RS_ALL
   ii) a user called BWREMOTE (or similar), used to receive the data
       from the OLTP, using S_BI-WHM_RFC
b) In the OLTP there exist also two user:
   i) a human administrator, needing authorizations to create users
       and RFC-destinations.
   ii) a user called ALEREMOTE (or similar), used to ...
       1) ... connect the OLTP to the BW
       2) ... extract the data
       3) ... send the data to the BW
       4) ... show monitoring dialogs
       for tasks 1 to 4, the profile S_BI-WX_RFC is used (however does
       not suffice on some points since some authorizations are
       missing in the delivered profile)
       5) ... make customizing of OLTP extractors
       for this, additionally the authorizations to execute
       IMG-functionality, to execute Transaction SBIW and
       to maintain the applications, which shall be customized, must
       be given during the customizing functionality is used.
I hope that this helps.
Regards,
Des.

How to resolve the hostname by ipaddress of the service like ftp, smtp..?

Hi,
Can someone help me in identifying the hostname of the machine thru ftp or smpt address, assuming I have this application running in a LAN where these services are existing.
I tried using gethostbyname by passing each of the computername in the LAN . What I get is hostent struct, but when I tried to match the ftp address with the address returned by hostent I doesnt match.
I have not yet tried using gethostbyaddr, I think this may not work because the address that it expects there is the IPaddress of the machine but not the service IP address such as ftp address.
Thanks for your time.
Ram

Hello Greg,
Thank you for this question. What you are reporting looks to me like requires deeper analysis in the system. The channel for such questions is the Service Marketplace http://service.sap.com/. Please post it there.
Thank you!
Kind regards, Kyoko

Error message 'Please log on to the SAP system' when selecting 'shop'

In SRM when we click on 'shop' or 'Goods Receipt' we get the error 'ITS System Information 'Please log on to the SAP System' where it prompts user to log on again. However when user logs on it opens up the same screen again saying please log on to the sap system.
This only happens when we shop using the External ITS (wgate), EBP works fine using the Internal ITS.
Please can someone help.
Kindest Regards
Paul

Hi
Please try this ->
Look using SRM transaction SITSPMON and RZ20, RZ21.
Also Please check SAP OSS Note 517860
-> For ITS, You need to maintain the RFC connection in the connection type "T" i.e TCP/IP. Maintain in the Table - TWPURLSVR.
Ensure that you have maintained correct entries in the TWPURLSVR table using SM30 transaction for the ITS Web path (http or https address path). Note you are passing port - 8001 in the address here. Incase you face problems, Please ask you BASIS person to help you out.
-> Please ask you BASIS person to help you out for maintaining ITS settings. (Ensure IACOR service is running properly - ITS server is running), through the transaction SMICM
-> What all logs appear in SLG1 and SM21 transactions after publishing all the Internet services.
-> If you are using ITS 6.2,you need to do the IACOR settings for SRM on the ITS server.Also in SE80 mainatin the Site for SRM system.After this ,you can publish all the ITS services usig the report,W3_PUBLISH SERVICES.
Related links ->
Integrated ITS :Login Problem
Re: ITS_CANT_LOAD_INCLUDE in BBPstart service
Re: ITS_DEST_NOT_FOUND
Re: ITS Configuration
Re: ITS Template not found
Do let me know.
Regards
- Atul

On iOS 8 and "old" device for the operating system. О iOS 8 и "Старых" устройствах на этой операционной системе

USA.
Good day! I like you a fan of the forum users of APPLE. I live in the Russian Federation. Began his acquaintance with this company back in 2010 with the Ipad 2 device was still on ios 5. In January 2014 I made a gift and bought the iPhone 5s on OC IOS 7. I bought it at the official Russian official price that more accurately put Apple in 1100 $. In our country, it is a lot of money. With the money I could live for 3 months. In fact, I became the owner of a top (at the time) from a favorite device of Apple. My iPhone 5s worked perfectly on ios 7. sometimes met friezes light animation, and non-critical bugs, but who is without sin? Favorite company I was willing to forgive it because I see that she is trying to be better and not standing still. Looking WWDC presentation which provided us with iOS 8 you assured me that everything was better, faster, more functional. I was determined that update my iPhone 5s to iOS 8.0 ... APPLE releases new OC iOS 8 ... And I live! Behind the beautiful words that we said at the presentation of the great features of the new iOS hiding "something." And that "something" turned my phone in ... "pumpkin"! Yes! In that same stupid pumpkin! And now I will explain why I think it's pumpkin, not rose.
Sea bugs ... and they are awful and terrible as it does not give me the full extent of my work enjoy iPhone 5s!
Start from the beginning:
1 Streaming through technology "Air play".
"Air play" ceased to function properly! He was often disconnected from Apple tv and Apple airport express last generation. Apple tv 2g can not receive the signal from my iPhone 5s! And when it's all the same he gets a video playback does not last long, it just breaks and does not connect again! Helps to restart Apple TV and a hard reset by holding the button "HOME" button and "POWER". On the "Apple TV" is worth the latest firmware as these problems are manifested in the previous firmware of the device.
2 Built-in browser "Safari".
Tab in the "Safari" became constantly updated when I switch to another application or the other tabs! Apparent lack of memory (on iOS 7.1.2 with it all much better. At least when switching tabs does not re-update the previous tab).
Playing online video on non-optimized mobile site in the browser "Safari" really does not work! It is turned on and loaded almost to infinity! Sometimes just a black screen with an icon "Play" to be pressed at least 100 times, and the result is 0!
Scroll pages in the browser have become terribly sharp and smooth! on iOS 7.1.2 everything is fine, nice and smooth and no such bugs! Total confusion and thoughtfulness browser "Safari".
If the video still runs (for me equates to a miracle) then when rewinding the film is generally something strange ... Fast chooses how minutes and seconds I watch a movie (usually just starts playing from the beginning), or does not respond at all ... This is the same magic Apple? Unlikely.
3 multitasking menu (double-press "HOME").
Call multitasking (by double-clicking "HOME") began working with a delay, with a lag, c jerky animation, and sometimes even without it.
Control Center (which is called swipe upwards) was to slow down! Yes! That retard! Animation jumping shutter control center began play with tangible frame loss! If iPhone 5s under the control of OS iOS 7.1.2 everything happened smoothly, beautifully and dynamically in the iOS 8.0 it looks like on the iPhone 5 running iOS 7.C than strongly connected is not clear! Graphic differences from iOS iOS 7 8 almost equal to 0, and the speed of decline in almost 50%! How ?! Why ?! Why does my iPhone 5s become the iPhone 5 ?! This is an artificial slowing my device to increase the demand on the iPhone 6 or still glitch iOS 8.0 for iPhone 5s? Honey the company Apple, I really hope for the 2nd. Especially this shortfall fps animation curtain markedly if you open multitasking (acquired by double button "HOME") and call the control center and you'll see that the animation is playing choppy and not smooth! On IOS 7.1.2 this is not! Control center jumps smoothly and beautifully! On iOS 8.0 it happens all the time! Even if you turn off your favorite contacts and recent calls (I'm ashamed to say they thought) that appeared in iOS 8 (they are above programs on the multi-tasking) not solve the problem. As well, if you call the control center on the lock screen, then drop FPS will be very noticeable even to the untrained viewer (especially if you take two iPhone 5s one running iOS 7 and 8, the second on iOS and compare them on the forehead). If the Control Center click airdrop (air play) the animation of its appearance again played in spurts and not terribly nice and smoothly (especially noticeable on the lock screen and comparison of the forehead)! In a telephone call has been going absolutely shameless FPS drop a call center management and other activities!
And yes, for me it is a critical issue! I do not want the transition to iOS 9 my iPhone 5s turned to the iPhone 4 on iOS 7 (vid you all remember this terrible story?)! I want my iPhone 5s worked as smoothly as on iOS 7.1.2! Nor any justification for this inhibition iskuvsstvennoy I can not see! 8 beautiful iOS did not! graphic elements do not appear! So goes the Apple is doing this on purpose ?! We go down the list!
4 minor bugs that just break my brain and kill all the beauty of the use of "the best mobile operating system in the world"!
4.1. When a call comes in when you clicked the icon making a call the phone for about 2-3 seconds, vibrates and plays a melody. On iOS 7.1.2 ringtone and vibration stops as soon as you have accepted the challenge and in your ear does not play your ringtone by "imagine Dragons", cheeks beats you invented vibration in the style of "Tick-tonic."
4.2. When you look at the page on the Internet-phone terribly terribly strongly heated! A pair of piping hot! On iOS 7.1.2 is no such problem! Telephone hot, but not as much as on iOS 8.0!
4.3. Folder on the home screen opens with a delay of 0.5-1 second is the impact on the overall impression of iOS 8.0.
4.4. When you create a set (12 pieces) icons in one folder if dramatically open the folder and make swipe to the left then the following icons in this folder does not have time to boot up and are delayed by 1 second.
4.5. When you create a folder with 1-9 icons do if the above action fails then the animation (the same bug exists in iOS 7.1.2). It is very not nice aesthetically.
4.6. Scroll to your "Settings" felt terribly antsy. Although it is not only in the application "Settings" but also to the entire system and applications in general ...
4.7. Scroll to the Home screen has become less responsive to user actions all movements inogoda occur with jerky animation and some delay to the user.
4.8. Quite often, and without rational reason for going off the sensor device. That is, the screen does not respond to any user action! Helps pressing "HOME" or hard reset by holding the button "HOME" and "POWER".
4.9. Most people on the iPhone 5s lost communication with a mobile operator. Just go on and lost and because of this I have missed calls from their loved ones and friends (would cost you to be glad that I have not missed calls on business issues).
5.0. Many owners of iPhone 5s and iPhone 5 uhudzhenie complain about battery life. I honestly did not notice it, but we will not drop this off.
Outcome.
And now gets quite an interesting question, why? Why does my iPhone 5s began to slow? Why in the absence of graphical improvements are absolutely the same actions were reproduced with the loss of fps, slow down, lag, hover, fly? Why, if put next iPhone 5s on iOS 7.1.2 and exactly the same iPhone 5s on iOS 8.0 and pull the control panel to call multitasking bar, carry out all other actions I have described it on your device running iOS 7.1.2 it will work without any delays, lags, the deterioration in the responsiveness of the interface, reducing fps, and no departures from simple applications written directly by Apple? I see absolutely no any obstacles in the way to make the iPhone 5s to the operating system iOS 8.0 worked with the same smoothness, with the same responsiveness and speed as the iPhone 5s running iOS 7.1.2! I do not see what these restrictions are not!
There are many different bugs that I do not even remember now (as I write this text on emotions (positive) as able to roll back your iPhone 5s back to iOS 7.1.2, and he seemed to come alive with new life) and so far I have esteemed company APPLE does not eliminate these improvements do not, I will not go back to iOS 8.0! if the dispensation of these bugs, flaws, intentional degradation of the (almost identical in performance in comparison with the iPhone 6) IPhone 5s will not happen and the company APPLE will continue to apply to consumers of their products as a beta tester I will be forced to organize a petition and file a class action lawsuit in court not only in their own country (which is for the Russian Federation) but also in the United States and in other countries where people are just like me trying to deceive, mislead and force companies to buy new devices APPLE without having expressed any any more substantial explanation except as <iPhone 6 was 25% more powerful on with alignment with the iPhone 5s>!
P.s.
I hope Apple will still listen to their users and I also hope that it (Apple) still change his mind and will try in the near future to give users not-so-old devices (iPhone 5s, iPad Air, iPad mini Retina) and enjoy on all the new features of iOS 8 no lag, locked up, overheating, inhibited animation. Thank you for being there!
Ru.
Всем доброго времени суток! Я как и вы форумчане являюсь фанатом компании APPLE. Проживаю я в Российской Федерации. Начал свое знакомство с этой компанией в далеком 2010 году с устройства Ipad 2 тогда еще на ios 5. В январе 2014 я сделал себе подарок и купил iPhone 5s на OC IOS 7. Купил я его официально по официальной Российской цене которую выставила Apple точнее за 1100$. В нашей стране это очень большие деньги. На эти деньги я бы мог жить 3 месяца. По сути я стал обладателем топового (на тот момент) устройства от любимой компании Apple. Мой iPhone 5s прекрасно работал на ios 7. Иногда встречались легкие фризы анимации, и не критичные баги, но кто без греха? Любимой компании я был готов это простить так как вижу, что она старается быть лучше и не стоит на месте. Посмотрев презентацию WWDC на которой представили iOS 8 нас с вами уверяли, что все стало лучше, быстрее, функциональнее. Я твердо решил, что обновлю свой iPhone 5s до iOS 8.0... APPLE выпускает новую OC iOS 8... И я обновился! За красивыми словами, что нам говорили на презентации, за великолепными функциональными возможностями новой iOS скрывалось "нечто". И это "нечто" превратило мой телефон в... "тыкву"! Да! В ту самую тупую тыкву! И сейчас я объясню почему я думаю, что это тыква, а не роза.
Море багов... причем они ужасны и страшны так как не дают мне в полноценной мере насладится работой моего iPhone 5s!
Начнем по порядку:
1. Потоковая передача данных посредством технологии "Air play".
"Air play" перестал нормально работать! Он стал часто отсоединяться от Apple tv и Apple airport express последнего поколения. Apple tv 2g не может принять сигнал от моего iPhone 5s! А когда все же это у него получается то воспроизведение видео длится не долго оно просто обрывается и не дает подключиться повторно! Помогает перезагрузка Apple TV и жесткий сброс посредством удержания кнопки "HOME" и кнопки "POWER". На "Apple TV" стоит последняя прошивка так же эти проблемы проявлялись и на предыдущей прошивке устройства.
2. Встроенный в систему Браузер "Safari".
Вкладки в "Safari" стали постоянно обновляться когда я переключаюсь на другое приложение или на другие вкладки! Явная нехватка оперативной памяти (на iOS 7.1.2 с этим все гораздо лучше. по крайней мере при переключение вкладок не происходило повторное обновление предыдущей вкладки).
Воспроизведение онлайн видео на не оптимизированном для мобильных устройств сайте в браузере "Safari" толком не работает! Оно включается и загружается чуть ли не до бесконечности! Порой просто черный экран с иконкой "Play" на которою нажимай хоть 100 раз, а результата 0!
Пролистывание страниц в браузере стали до ужаса резкими и не плавными! на iOS 7.1.2 все прекрасно, плавно и красиво и таких багов нет! Общая заторможенность и задумчивость браузера "Safari".
Если видео все же запускается (что для меня приравнивается к чуду) то при перемотке фильма происходит вообще что-то непонятное... Перемотка сама выбирает с какой минуты и секунды мне смотреть фильм (чаще просто начинает воспроизводить все с самого начала) либо не реагирует вовсе... Эта та самая магия Apple? Непохоже.
3. Меню многозадачности (двойное нажатие кнопки "HOME").
Вызов многозадачности (посредством двойного нажатия кнопки "HOME") стал работать с задержкой, с лагом, c дерганой анимацией, а порой и вовсе без нее.
Центр управления (который вызывается свайпом снизу вверх) стал тормозить! Да! Именно тормозить! Анимация выпрыгивания шторки центра управления стала воспроизводиться с ощутимой потерей кадров! Если на iPhone 5s под управление OS iOS 7.1.2 все происходило плавно, красиво и динамично то в iOS 8.0 все выглядит как на iPhone 5 под управлением iOS 7.с чем это связанно решительно не понятно! Графические отличия iOS 7 от iOS 8 практически равны 0, а скорость работы сниженна практически на 50%! Как?! Почему?! Почему мой iPhone 5s стал iPhone 5?! Это искусственное замедление моего устройства для повышения спроса на iPhone 6 или все же недоработка iOS 8.0 для iPhone 5s? Дорогая компания Apple, я очень надеюсь на 2-е. Особенно эту нехватку fps в анимации шторки заметно если открыть многозадачность (посредством двойного нажития кнопки "HOME") и вызвать центр управления и вы увидите что анимация проигрывается рывками и не плавно! На IOS 7.1.2 такого нет! Центр управления выпрыгивает плавно и красиво! На iOS 8.0 это происходит постоянно! Даже если отключить избранные контакты и недавние вызовы (я грешным делом подумал на них) которые появились в iOS 8 (они находятся выше программ на панели многозадачности) проблему не решить. Так же, если вызвать центр управления на экране блокировки то падение FPS будет очень заметно даже для неподготовленного зрителя (особенно если взять два iPhone 5s один под управление iOS 7 и второй на iOS 8 и сравнить их в лоб). Если в центре управления нажать кнопку airdrop (air play) то анимация ее появления опять таки проиграется рывками и ужасно не красиво и не плавно (особенно заметно на экране блокировки и при сравнение в лоб)! При телефонном вызове происходит уже совсем уж бессовестное падение FPS при вызове центра управления и при других действиях!
И да, для меня это критичная проблема! Я не хочу чтобы при переходе на iOS 9 мой iPhone 5s превратился в iPhone 4 на iOS 7 (Вы видь все помните эту страшную историю?)! Я хочу чтобы мой iPhone 5s работал так же плавно как и на iOS 7.1.2! Ни каких оправданий для этой искувсственной заторможенности я не вижу! iOS 8 красивей не стала! графических элементов больше не появилось! Так выходит компания Apple делает это специально?! Идем дальше по списку!
4. мелкие баги которые просто разрывают мой мозг и убивают всю красоту использования "Самой лучшей мобильной операционной системы в мире"!
4.1. При входящем вызове когда вы нажали иконку принятия вызова телефон еще около 2-3 секунд вибрирует и проигрывает мелодию. На iOS 7.1.2 мелодия и вибрация останавливается как только вы приняли вызов и вам в ухо не играет ваш рингтон в исполнении "imagine Dragons", по щекам не бьет придуманная вами вибрации в стиле "Тик-тоник".
4.2. Когда смотришь страницы в интернете телефон ужасно-ужасно сильно греется! Парой обжигающе сильно! На iOS 7.1.2 такой проблемы нет! Телефон горячий, но не так сильно как на iOS 8.0!
4.3. Папки на домашнем экране открываются с задержкой в 0.5-1 секунду это сказывается на общем впечатлении от iOS 8.0.
4.4. При создании множества (12 штук) иконок в одной папке если резко открыть папку и сделать свайп влево то следующие иконки в этой папке не успевают загрузиться и отображаются с задержкой в 1 секунду.
4.5. При создании папки с 1-9 иконками если проделать описанное выше действие то произойдет сбой анимации (этот же баг есть и в iOS 7.1.2). Это крайне не приятно эстетически.
4.6. Пролистывание в приложении "Настройки" стало ужасно дерганым. Хотя не только в приложении "Настройки" но и по всей системе и в приложениях в целом...
4.7. Пролистывание на Домашнем экране стало менее отзывчивое на действия пользователя все движения иногода происходят с дерганой анимацией и какой-то задержкой на действия пользователя.
4.8. Довольно часто и без объяснимой причины происходит отключения сенсора устройства. То есть экран не реагирует ни на какие действия пользователя! Помогает нажатие кнопки "HOME" либо жесткий сброс посредством удержания кнопки "HOME" и "POWER".
4.9. Большинства людей на iPhone 5s пропадает связь с сотовым оператором. Просто берет и теряется и из за этого я уже пропускал звонки от своих близких и друзей (стоило бы вам порадоваться, что я не пропустил звонки по рабочим вопросам).
5.0. Многие обладатели iPhone 5s и iPhone 5 жалуются на ухуджение работы аккумулятора. Я честно говоря этого не заметил, но не будем сбрасывать этого со счетов.
Итог.
А теперь встает довольно интересный вопрос, почему? Почему мой iPhone 5s стал тормозить? Почему при отсутствии графических улучшений абсолютно одни и те же действия стали воспроизводится с потерей fps, тормозить, лагать, зависать, вылетать? Почему если положить рядом iPhone 5s на iOS 7.1.2 и точно такой же iPhone 5s на iOS 8.0 и вытянуть панель управление, вызвать панель многозадачности, провести все остальные действия описанные мною то на устройстве под управлением iOS 7.1.2 все будет работать без каких либо задержек, лагов, ухудшение в отзывчивости интерфейса, уменьшении fps и просто без вылетов из приложений написанных непосредственно компанией Apple? Я не вижу абсолютно ни каких преград в том чтобы сделать так чтобы iPhone 5s под управлением операционной системой iOS 8.0 работал с той же плавностью, с той же отзывчивостью и скоростью, что и iPhone 5s под управлением iOS 7.1.2! Не вижу от того, что этих ограничений нет!
Есть еще множество различных багов о которых я сейчас даже не вспомню (так как этот текст я пишу на эмоциях (положительных) так как смог откатить свой iPhone 5s обратно на iOS 7.1.2 и он как будто ожил новой жизнью) и пока глубокоуважаемая мною компания APPLE не устранит эти не доработки я не буду возвращаться обратно на iOS 8.0! если устроения этих багов, недоработок, умышленного ухудшения работы (практически одинакового по производительности в сравнении с iPhone 6) IPhone 5s не произойдет и компания APPLE будет и дальше относиться к потребителям своей продукции как к бета тестерам я буду вынужден организовать петицию и подать коллективный иск в суд не только в своей стране (коей является Российская Федерация) но и в США и в других странах где людей так же как и меня пытаются обмануть, ввести в заблуждение и заставить покупать новые устройства компании APPLE не дав на то ни каких более существенных объяснений кроме как < iPhone 6 стал на 25% мощнее по с равнению с iPhone 5s>!
P.s.
Я надеюсь компания Apple все еще прислушивается к своим пользователям и я так же надеюсь, что она (Apple) все же одумается и постарается в ближайшее время дать пользователям не таких уж и старых устройств (iPhone 5s, iPad Air, iPad mini Retina) наслаждаться и дальше всеми новыми возможностями операционной системы iOS 8 без лагов, подвисаний, перегревов, заторможенной анимации. Спасибо, что вы есть!

Agreed! This bug with the ringtone delay (№4.1) is really annoying

How to create a document/report on all objects in the BW system?

Hi,
The requirement in our company is to create a document/report with the list of all the objects that exist in the BW system for various applications. This list should contain the technical details of the different objects and where an object is used, what's the source for the object etc. The information should be similar to that in the Metadata repository but it should be one single document/report which includes all the objects.
I tried using the 0TCTBWOBJCT info object (content browser) but it was not of great help.
Can anyone help me out in this task?
Thanks,
Anu

Hi,
Try to use tables RSOSFIELDMAP, RSDSSEGFD and RSTRAN
Hope it helps
bhaskar

How to load a class dynamically in the current/system class loader

I need to dynamically load a new jdbc driver jar to the current/system class loader... Please note that creating a new classloader will not help since the DriverManager refers to the systemclassloader itself.
Restarting the application by appending the jar to its classpath will solve the problem but I want to avoid doing this.

Did you then create a ClassLoader to load the JDBC
driver and then install it into the system as
directed by the JDBC specification (ie
Class.forName(someClassName))?
And then try to use it from a class loaded fromsome
other ClassLoader (i.e. the system class loader)?
If you did not try this please explain why not.O.K. I just looked at the source to
java.sql.DriverManager. I did not know what I was
talking about, as what I suggested above will not
work.
This is my new Idea:
Create a URLClassLoader to load the JDBC driver also
in this ClassLoader you need to place a helper class
that does the following:
public class Helper {
public Driver getJDBCDriver(String driverClassName,
String url) {
try {
Class.forName(driverClassName);
Driver d = DriverManager.getDriver(url);
return d;
catch(Exception ex) {
ex.printStackTrace();
return null;
}Now create an instance of the Helper class in the new
ClassLoader, and call its getJDBCDriver method to get
an instance of the driver (you will probably have to
create an interface in the root class loader that the
Helper implements so that you can easily call it).
Now from the root classloader you can make calls
directly to the returned Driver and bypass the
DriverManager and its restrictions on cross
ClassLoader access.
The only catch here is that you would have to call to
the returned Driver directly and not use the Driver
Manager.This sounds like will work but I did not want to load DriverManager in a new classloader.. I did a hack
I unzip the jar dynamically in a previously known location (which I included in my classpath when launching the app). The classLoader finds the class now though it did not exist when the app was launched !
A hack of-course but works eh ..

HT2477 I have a new MacBook Pro which has Windows 7 installed so I have only ever used it as a PC, I would like to use the apple system but was never shown how to do this and I cannot even work out how to switch it on . If I just press power iI get wind

I switch the power on on my MacBook Pro I get windows7
this is no problem but I love my IPad and would like to use the apple system on my MacBook .
CAn anyone tell me which keys I press to change from windows 7 to Apple most articles I have read tell you it is easy but not one says "firstly press x then press y and when you see c press v so I no idea how to do it,
I am well educated but I am 75 so I do not understand the jargon but I am fairly good at using computers and I do like the app system.
I Would be very pleased if someone can advise me
best regards
TOm

Reboot, hold the option key down as soon as you hear the chime. When the Boot Manager appears select OSX instead of Windows.

Error while installing J2EE Add- In to the ABAP system

Error while installing J2EE Add-In to the ABAP system
We are installing J2EE Add-In to the ECC5 System in the new hardware.
When are getting Error while installing J2EE Add-In to the ABAP system.
Transaction Begin*****************************
ERROR 2005-08-10 14:58:28
CJSlibModule::writeLogEntry()
CJS-20011 J2EE engine configuration error. DIAGNOSIS: Error when
configuring J2EE Engine. See output of
logfile /usr/sap/QSS/install/batchconfig.log: 'My Library Path
is: /usr/j2se/jre/lib/sparcv9/server:/usr/j2se/jre/lib/sparcv9:/usr/j2se/jre/../lib/sparcv9:/tmp/sapinst_exe.13084.1123702275:/usr/lib::/usr/openwin/lib:/usr/sap/QSS/SYS/exe/run:/oracle/QSS/920_64/lib:/oracle/QSS/920_64/lib32:/usr/lib
ElementInfoTask has finished successfully on dispatcher
ConsoleLogsTask has finished successfully on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on dispatcher
ElementInfoTask has finished successfully on server
ConsoleLogsTask has finished successfully on server
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on server
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on server
ChangeServicePropsTask has finished successfully. Service: dbpool on
server
ChangePasswordsTask finished successfully.
Error occured while connecting to database (UploadFile). Msg: No such
algorithm: DESede
Transaction end***********************************
We tried twice clean installation, after removing j2ee dir, SCS and
resp profiles and droping PSAPQSSDB tablespace and SAPQSSDB user.
I have also confirmed the passwords in ABAP system/000 for SAPJSF, DDIC, J2EE_ADMIN, J2EE_GUEST.
We are getting the same error in both tries.
Kindly advice us to resolve the problem.
Thanks and Regards,
Srinivas

Ananda,
you saved my day! I've been banging my head against the wall with this same problem during a J2EE add-in installation for SRM 4.0 on Windows, in preparation of an LAC 2.0 installation. I had tried deleting the schema first, but that didn't work. After I removed the sys\global\security folder as well, it worked perfectly.
Thank you.

My time capsule all of a sudden disconnected from the wireless system and can no longer be fund by my MacBook Pro. The little lamp on the the capsules has turned off, but it still makes a noice inside,

My Time capsule did a backup yesterday in the morning without any problem. All of a sudden, it disconnected from the wireles system last night and the little indicator lamp turned off. It still makes a noice, as if a disc was turning inside. The Time Capsule was bought last year in June. Any suggestiom what to do? What happens if I press the little buttom (reset?), will I loose af my backup?

Do a reset.. power off the TC..
Hold in reset and power on.. keep holding in reset until it flashes rapidly.. if it turns on at all.
If you bought it in June.. take it back today.. it is broken.. at a guess.
Some Gen4 are failing this way.. get Apple to replace it.. even if it is a few days out of warranty it won't be much.

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

An RFC destination could not be specified for the logical system

Hello Experts,
I am trying post goods receipt in EWM system in a simple inbound delivery process. It is not getting posted back in ECC. I have my RFC connection setup properly(I assume since I was able to transfer inbound delivery to EWM in first place).It seems some setting related to Outbound queue in EWM is missing.Can anyone tell me in detail what settings are required?Is it something to do with WE20 transaction?I am not sure what settings should be done there.The error log is as below-
An RFC destination could not be specified for the logical system
SB3CLNT011
Message No. B1550
Diagnosis
An RFC destination should be specified for the logical system SB3CLNT011.
This could not be done in this case. SB3CLNT011 is not your local logical system
and this system is not included in the relevant Customizing tables.
Procedure
Check:
RFC
destination
Port
definitions
oubound partner profile of
message type SYNCH for this logical system
Regards,
Khushboo

Hi Oritra and Suraj,
I have checked remote connection in SM59 for both the logical system.It works fine.I understand this is more of a technical issue,but I don't have A local basis team to help me so reaching out to experts here.Can you guide me what technical settings could be checked for EWM-->ECC connection?When I execute BD82 for SB3CLNT011 it shows me green status with message "No messages have been defined for the selection conditions in the model".
Although when I do this for EWM logical system SB3CLNT012 it shows me this with all green status-
System SB3CLNT011 as a partner type already exists
System SB3CLNT012 as a partner type already exists
Port A000000018 with RFC destination SB3CLNT011 already exists
Outbound parameters for message type SHP_IBDLV_CHANGE SHP_IBDLV_CHANGE01 already
Outbound parameters for message type SHP_IBDLV_SAVE_REPLICA SHP_IBDLV_SAVE_REPLI
Outbound parameters for message type SYNCH SYNCHRON already exist
Am I missing something in WE20?
Regards,
Khushboo

Error while reading the PO in the Backend system. Inform system admin

Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
Teja

I am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

Logical System Name Not appearing in the Business System

Hi,
Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
Please also note that Business System is of the ROLE: Integration server.
When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
Can anyone please help us to update the 'Logical system name' in Business System in SLD?
Regards,
Rehan

Hi Sunil,
I followed your link till
Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
When I go back to Business system again its not showing the Logical system name in Integration tab.
regards,
rehan

IPAddress of the Clinet System

Similar Messages

Maybe you are looking for