IPages won't let me go to Page 2

I put graphics and text boxes into a document.  It won't allow me to get to page 2.

Where does it say it is called iPages?
What version of Pages are you referring to?
What template?
How is it not letting you "get to page 2"?
Have you opened a Layout document instead of a Word Processing document? ie Text does not flow to a second page when you run out of space on the first?
Peter

Similar Messages

  • My iPad won't let me open any pages in safari

    My iPad won't let me open any other pages. If I press the plus button it closes safari.

    Did your advice from this thread work? 
    https://discussions.apple.com/message/23696850?tstart=0#23696850

  • My Google Bookmarks says that my browser is offline and won't let me save the page but the Firefox booksmarks will let me save it.

    My Firefox bookmarks will let me save the web page but Google bookmarks won't and tells me that my browser is offline and to check my browser and network settings. I also can't download you-tube videos like I used to. When I hover on the picture, the "download" box does not show up but it does give me the option to stop download. I just changed to Shaw internet.

    Did anything happen to the computer?  It appears that you are trying to sync to another iTunes library since in that case you can only sync with one iTunes library.

  • Won't let me remove unwanted pages.

    One or more of the pages in use could not be deleted.
    This is the message I am getting. But, I needed to replace the pages with updated ones. So slid the new ones in to the front of the document, with plans of deleting the orig pages that are now toward the end of the doc. It will not let me.
    The only linking properties I have are buttons set up on an intro menu (toc) and associated to jump to particular page #s. This functionality has "held" and is still in tact and links to the fresh, page replacements.
    Tried closing out and opening again, but that has not cleared the opportunity to remove pages. Any other ideas?
    Thank you.

    Do you have other toolsbar installed in Acrobat perhaps like the TerraGo Toolbar? Or Adobe Bridge open? If so, try updating the TerraGo toolbar or closing Bridge. Otherwise, you might try doing a repair of your Acrobat installation from under the Help menu.

  • Website won't let me leave loaded page

    "http://doodleboxdesign.co.uk/fonts/1/#videoplay" this page took control of your browser=when I was directed to it from another webpage.
    The above site would not let me close the tab it loaded in. When I used control,alt,delete to close firefox v22.0 and reopened firefox the above page reopened in a tab.

    I'm a little late to the game here, but the best way I've found to get rid of these tabs is just to disable javascript. These pages use javascript to throw up those "Are you sure you want to leave this page?" popup messages and reload the page.
    Just type about:config in the address bar (I usually have to open a new window to do this because I can't even leave the hijacked tab), and search for javascript.enabled. Double-click it to toggle it to false. Then just go back to your hijacked tab and close it. Just make sure to go back and enable javascript when you're done.

  • When I try and print a web page in the print screen ALL the Print Frame options are greyed out. It won't let me print a page as I see it. I need to pring a page as is. How do I do it in the new 8.0??

    I go to print and try to select the radio button to print all frames, but It's not working

    The '''Print Frames''' options are greyed out unless the web page is made with Frames. I-Frames don't work the same.
    Check out this '''''frames test page''''' - http://www.draac.com/framestest.html <br />Is the '''Print Frames''' part of the print dialog box active?
    As far as printing a page as you see it, many web pages use '''print.css''' files for print-media. The print.css specifies exactly what is to be sent to the printer and it can control the formatting of the printed page.

  • Reinstalled Acrobat Pro 8.1.6 won't let me print web pages to PDFs

    I'm really ticked at Adobe's "help" in updating the program only to cause a lot of misery.  I'd read Acrobat had a security update, and got a constant reminder from Adobe update to install the available update.  I've been using Acrobat Pro 8.1.6 with absolutely no problems printing web pages to PDFs.  I installed the 8.1.7 update which immediately disabled Acrobat completely.  So I wasted a lot of time uninstalling Acrobat and reinstalling sequential versions to get back to 8.1.6.  Now I can't print web pages to a PDF.
    I had NOT done anything else to installed programs in the meantime, except that probably Norton has automatically updated antivirus files in the background.  I don't have any problems using Acrobat to open and print an existing PDF, or to create new PDFs from my scanner.  I can do a hardcopy print of a webpage by selecting my Brother printer.  From Word 2002 and Excel 2002, I can create a PDF by "printing" to Acrobat as usual.   The only problem is creating a PDF by "printing" a webpage by selecting Acrobat as the device from the list of available printers.  This problem happens both with Firefox and with Internet Explorer 7.
    I have Windows XP Pro SP3.  I did the most recent Windows Tuesday security update several days before messing around with Acrobat and did not have any problems printing PDF files from Firefox or IE7.  So, it seems like it's clearly an Adobe Acrobat problem.  I get the small box saying "Preparing to Print" which goes nowhere and then I have to use the Task Manager to get out of the loop.  That closes Firefox, and when I reopen Firefox, the same webpage comes up.

    I'm really ticked at Adobe's "help" in updating the program only to cause a lot of misery.  I'd read Acrobat had a security update, and got a constant reminder from Adobe update to install the available update.  I've been using Acrobat Pro 8.1.6 with absolutely no problems printing web pages to PDFs.  I installed the 8.1.7 update which immediately disabled Acrobat completely.  So I wasted a lot of time uninstalling Acrobat and reinstalling sequential versions to get back to 8.1.6.  Now I can't print web pages to a PDF.
    I had NOT done anything else to installed programs in the meantime, except that probably Norton has automatically updated antivirus files in the background.  I don't have any problems using Acrobat to open and print an existing PDF, or to create new PDFs from my scanner.  I can do a hardcopy print of a webpage by selecting my Brother printer.  From Word 2002 and Excel 2002, I can create a PDF by "printing" to Acrobat as usual.   The only problem is creating a PDF by "printing" a webpage by selecting Acrobat as the device from the list of available printers.  This problem happens both with Firefox and with Internet Explorer 7.
    I have Windows XP Pro SP3.  I did the most recent Windows Tuesday security update several days before messing around with Acrobat and did not have any problems printing PDF files from Firefox or IE7.  So, it seems like it's clearly an Adobe Acrobat problem.  I get the small box saying "Preparing to Print" which goes nowhere and then I have to use the Task Manager to get out of the loop.  That closes Firefox, and when I reopen Firefox, the same webpage comes up.

  • One certain website, won't let me print several pages. trys to fit all pages in one!

    There is a credit card account that when I try to print the statement, the bottom of the first page "squishes" all on the bottom. The statement could be 4 pages long, doesn't matter, it tried to "squish" on bottom of first page. The first 3/4 of the page statement prints out fine. This just started happening approx. 3 weeks ago, Worked fine before. I have to go to Internet Explorer or Google CHrome if I want to print out my statement. And like I said, this only happens with this credit card statement, nothing else. Is it their website?

    Firefox has problems printing some styles in HTML pages that appear normal on the screen, but since this is confidential information, it's hard to give any suggestions on what to try, and it's probably not helpful to suggest hacking the page. The following are general suggestions.
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    orange Firefox button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page and logging in again. Does that help?
    Could you try Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using
    Help > Restart with Add-ons Disabled
    In the dialog, click "Start in Safe Mode" (''not'' Reset)
    Safe mode does not automatically disable plugins. Flash should be fine, but you could disable the others here:
    orange Firefox button (or Tools menu) > Add-ons > Plugins category
    Any difference?

  • Logged on to my network and says connection lost won't let me open web pages ?

    Ipad 2 logs on to network then when i open safari i get message that safari can't open because of lost connect while other computers still work ?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iDisk Storage says it's full on my Site Publishing page and won't let me publish but when I got to my account details page looking to buy more space it says I've only used 3MB out of 20GB. Why are they different? And why did it stop letting me publish?

    I've been publishing just fine for the past few days and all of the sudden, when I click 'Publish Site' now, the 'content rights' pop up shows up. But then it wants me to sign into MobileMe (to which I'm already signed in). When I click 'sign in' it takes me to System Preferences > MobileMe > Account. I click on iDisk and it says "20.4 GB total, 2.7 MB used, 20.4 GB available" 
    (I'm not sure why my GB available is still the same even though I've used 2.7 MB.... it wouldn't really matter though if I was able to publish.)
    I went back to iWeb to my Site Publishing Settings page and at the bottom there's a bar labeled 'iDisk Storage' and it's completely blue (meaning used).
    I also went to my MobileMe account to 'Summary' and under 'Mail and iDisk Storage' it says '3 MB of 20 GB used'.
    I'm assuming that it's not letting me publish because it thinks that I have run out of iDisk storage but I could be wrong. I just renewed my MobileMe account in Feb so I'm all payed up.. that shouldn't be the problem. Do you know of any other reasons why it won't let me publish?
    I feel like something is wacky with my iDisk Storage either way.
    I really hope all of this stuff makes sense. I'm fairly new to Mac and I'm still not sure about all of the lingo.
    Thank you for any advice you can give! Any suggestions will be MUCH appreciated!!
    -Ashley

    Try the following:
    close iWeb.
    delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
    go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
    reboot.
    launch iWeb and try again.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.
    OT

  • I entered my debit card for a app latter when I went to update all it asked password as usual then said sign in required took me to page sayin my card has been declined use alternate I don't have alternate but now it won't let me download free apps niethe

    I entered my debit card for a app latter when I went to update all it asked password as usual then said sign in required took me to page sayin my card has been declined use alternate I don't have alternate but now it won't let me download free apps niether

    Do you have enough funds in your bank account?
    otherwise iTunes sometimes black lists card if there are too many fradulent purchases
    Reason why they might black list a card is possibly you call in for alot of fradulent purchases
    One more reason can be because iTunes does actually limit the amount you can change payment methods
    Call AppleCare Phone support and have your call directed to iTunes Store
    1-800-275-2273

  • My phone has the correct AppleID in the in settings section but asks me to login with one that isn't mine.  I deleted the ID from my itunes but it still won't let me login with mine. How do I get my iPhone on the same page?

    My iphone4 has the correct Apple ID in the information settings section and asks me to login to my ID most of the time but when I try to update my apps, it asks me to login with an ID that isn't mine.  I deleted the wrong ID from my itunes but it still won't let me login with my own ID to update apps.  How do I get my iphone on the same page?

    How did you obtain these apps? All apps are DRM protected & tied forever to the account used to originally obtain them. They cannot be transferred to another Apple ID(account), nor can they be updated using any Apple ID other than the one that was used to originally obtain them.

  • What if a person no longer has access to the house in which the card itself, but iTunes recognizes my login, shows my balance, won't let me get past the "code" page?

    What if a person no longer has access to the card itself, but iTunes recognizes my login, shows my balance, won't let me get past the "code" page?

    What pops up is the page that tells me I can use my camera to take a photo - since I don't have access to the card, useless.  I am caught going round in this loop - there's that one button, no other option.  Thanks in advance. 

  • The Facebook app won't let me sign on with my account. I can sign on to another account just fine. Will not let me sign on through Safari or Google either. When I put in email and password it goes right back to the log in page. Help?

    On my iPhone 4, the Facebook app won't let me sign on with my account. I can sign on to another account just fine. The first time I sign on with the FB app it goes to the news feed page, says loading, and then flipps between loading and connection error.  If I close out of that and try to sign in again it locks up on the logging in page.  From Safari or google it goes to the log in page, after entering my email and password it goes right back to the log in page.  I have tried resetting my phone, deleting and re-installing the app and everything else I can think of.  Since I can log onto another account on my phone it can't be the app, any ideas would be greatly appreciated! Thanks

    Sounds like a hard reset is in order...

  • Took delivery of imac yesterday with pre-installed Pages, Numbers and Keynote. App store says they need updating but won't let me because I've never owned the major version of the software. I have paid like anyone else, so why can't I update?

    Took delivery of imac yesterday with pre-installed Pages, Numbers and Keynote. App store says they need updating but won't let me because I've never owned the major version of the software. I have paid like anyone else, so why can't I update?

    You must be signed into the Apple Store with your Apple ID or it won't work.
    and
    How to deal with a 100 Store Error:
    Try here >  Mac App Store: "An unknown error occurred (100)" when purchasing
    If that doesn't help, open the Finder. From the Finder menu bar click Go > Go to Folder
    Type this exactly as you see it here;
    ~/Library/Caches/com.apple.appstore/Cache.db
    Click Go
    Move the Cache.db file to the Trash.
    Now here:
    ~/Library/Preferences/
    Click Go
    Move these files from the Preferences folder to the Trash.
    com.apple.appstore.plist
    com.apple.storeagent.pllist
    Now here:
    ~/Library/Cookies
    Click Go
    Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
    Empty the Trash, try the App Store.

Maybe you are looking for

  • Customer Service

    I am having real difficulty in getting someone to take this issue on because I am not a number (RMA). We bought the MP3 player in July 200 for my son who is autistic. It is very important to him that his stuff looks right and he simply will not use s

  • Is there a way to test NIVLM using a dummy license file?

    we are testing a situation where an autocad install (Flexlm) crashes a nicely running VLM install. we wan to test this on another server using a dummy license file. just to keep away from the Live environment. Can this be done? ruud  Solved! Go to So

  • WRT54GS firmware issues

    Hello all, I have a befsr41 now for about 6 years and it has been great.  I recently purchased a WRT54GS to replace it, so that I can have another wireless access point, along with TZO. I installed the 54GS and manually copied all of my port forwards

  • Importing sound with a player

    This is being much harder than I was led to believe- I wanted to add a sound file to a SWF file with a simple player that would let users control the sound like a movie file. According to the help files: "You can import an FLV file or F4V file with s

  • Sharing an Adobe web gallery

    After creating an Adobe web gallery how do I share it. I have tried to publish it on my apple computer (10.6) but seem to be missing a few steps. Any ways to share a m Adobe web gallery would be great. Thank you, Andy