IPAs 2 does not rotate , after updating to 7.1.2

Dear Sir,
i have purchased this iPad in 29th Feb 2012 .
SErial No is DL*****KNV
Model MC 992LL/A
i have been using this IPad  and there is nothing wrong , except that there is no rotation. This has happened after updating to 7.1.2 .
i Had taken this and shown this to ur Sales & Service centres  and they have said that they cannot do anything to this . My IPad is not damaged
PLease help me with this error .
I Also have a I Phone 4S , and this is working fine now,. This also had the same problem , but was rectified by the Service Engineers of Apple.
RAmesh M Rao
PHone *****
<edited by host>

FIrst thing - Don't post your phone number (or other private information) here, this is a public forum for Apple users to help other Apple users, it is not monitored by Apple support staff.
Tutorials
Second thing -  Check the status bar at top of your iPad screen, next to the battery level indicator is there an icon of a padlock with a circular arrow surrounding it? If so the iPad has been locked into its current screen orientation, to unlock it slide the switch on the right-hand side of the case above the volume rocker switch up and see if the padlock icon disappears and the screen now rotates correctly (for this to work Settings/General/USE SIDE SWITCH TO: should have "Lock Rotation" checked, if "Mute" is checked instead then use the padlock icon in Control Center to lock/unlock screen rotation).
If it still won't rotate the screen then try resetting the iPad - hold down the sleep/wake button and the Home button simultaneously and keep them held until you see the Apple logo appear on the screen, then release the two buttons and allow the iPad to finish rebooting normally. Does screen rotation now work?

Similar Messages

  • Ipod touch 3g screen does not rotate after update

    after upgrading my iPod Touch 3rd Generation os to ver 5.0.1 I have noticed that the screen will quit rotating.  I can do a hard reset and it will rotate but after a very short period of time it quits rotating again.

    Try restoring the iPod. First from backup and if problem persists, restore to factory defaults/new iPod.
    If you still have the problem then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT1688 My Hot Spot does not work after update to 6.0.1.  Service is with ATT.  Apple says problem is with ATT, ATT says problem is with Apple.  Anyone else having this problem?

    My Hot Spot does not work after update to 6.0.1.  Any suggestions?

    Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
    so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
    so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

  • Click to activate does not work after update

    Click to activate plugin does not work after updating to version 23.0.1

    hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • Print size in Photoshop CC does not work after updating

    Print size in Photoshop CC does not work after updating, it was working fine before but now when I click to go to print size either from the menu of right chicking when the hand tool is selected, the image just zooms right out until it is a tiny little box in the centre of the screen, no good what so ever, as I say it was working fine before the update.
    I am using window 7 with 8 gb of ram and an I7 with a 1GB graphics card.
    Can anyone help please?
    thanks
    Fujibill

    Check the Image>Image Size and see what the print size is supposed to to be for the open document.
    Also, resetting the photoshop cc preferences might fix it.
    http://forums.adobe.com/thread/375776?tstart=0

  • Firefox does not start after updates

    Every time i get an update, download it and restart Firefox, it does not restart and i have to run the set file again. It means too that the updates have not been dowl=nloaded !
    Windows 7 ultimate. 4Gb ram 1 Tb Regards

    I AM ABSOLUTELY SICK-SICK-SICK OF THIS PROBLEM. I HAVE TRIED EVERYTHING BUT IT STILL DOES NOT RESTART AFTER UPDATES. I HAVE DELETED/CREATED NEW PROFILES, DONE CLEAN INSTALLS - NO CHANGE!!!
    I HAVE CHECKED FOR VIRUSES - NOTHING. CLEAN. I AM ABOUT READY TO GIVE UP AND SEND A LETTER TO A LOCAL TECH/MEDIA PERSON SO THAT THEY CAN WRITE AN ARTICLE ABOUT THIS ISSUE THAT FOR SOME REASON MANY OTHERS HAVE AS WELL AND YOU=MOZILLA HAVE NOT OFERED ANYTHING CLOSE TO A SATISFACTORY RESPONSE, EXPLANATION, FIX, ETC ETC ETC

  • IOS 7 app store update list does not clear after updates have been installed

    iOS 7 app store update list does not clear after updates have been installed

    Rifles wrote:
    Good point, we will have to wait and see, it's a pity Apple has not produce an IOS7 PDF
    You mean like this one?
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Best of luck.

  • Card slot does not work after update (14/10/2011)

    Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
    MacBook Pro 13 OS ver. 10.6.8

    Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

  • Itunes does not work after Update any more

    Itunes does not start after the uodate and cannot be reinstalled.
    Seems not only a problem to me
    Any solutions yet ?

    Hello Wizzie71,
    It sounds like you updated iTunes and now it will not open. Try the steps outlined in the following article. You may need to re install iTunes but your library will remain intact if you do.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Iphone does not activate after update

    My Iphone 3 does not activate after last update. What can I do? The system does not let me pass the activation process so it is totally useless now.

    There are a number of things:
    1. iPhone 3G cannot update to 6.1.2 the highest IOS is 4.2.1.
    2. This is a sign that your iPhone was hacked or jailbroken.

  • HELP ME! Nokia 5230 does not work after update

    My nokia
    5230 will not boot after update. I've also tried everything and red green camera button intedruken but nothing worked. Can someone help me I am so on vacation.
    Sorry for my English I am Dutch

    Have a look at this complete guide.. If nothing works, then the ONLY solution is to visit Nokia Care...

  • Apple av adapter does not work after updating ios 5,01

    apple av adapter does not work after ios 5,01. no video on vga monitor. sound goes out on iphone 4 also.

    Thank you for your interest. Last night i tried again. It worked. there is still problem, so i could find out it that monitor is going to power saving mode then voice goes out and no view on monitor. I changed the power saving settings. And worked well. Thnx again.

  • Home sharing does not work after update to snow leopard 10.6.4 and iTunes 9

    I am using home sharing since about a year without any problems. After updating to snow leopard 10.6.4 and iTunes 9.2 it suddenly does not work anymore.
    On my iMac and my Mac Book Pro I get error code 3259 and it tells me to check my firewall and to enable Port 3689.
    I did not change anything in the firewall settings, itunes on both allows data traffic in both directions. I also do not find any option to activate a port ( also wondering why this is suddenly now necessary)
    I deactivated home sharing on both machines and enabled it again. It still does not work.
    On both machines iTunes displays the the library on the left side but like said it is not accessable
    With Finder I can access the other computer from both machines without any problem.
    Any help to solve this would be very much appreciated

    first of all, if you are behind a router firewall, and have your network secured (WPA2 and a long, non-dictionary password made up of letters and numbers), you don't need the software firewall on your Mac(s).
    @ least turned if off for troubleshooting purposes.
    turn home sharing off on both computers, and make sure
    (a) both Macs have access to the internet
    (b) iTunes on both machines is authorized for the same iTunes account.
    turn home sharing back on on both Macs.
    does it work ?
    JGG

  • N-gage does not work after Update

    Hi!
    If you know of any threads that handles my problem, please tell me!
    What I have done:
    I installed the N-Gage on my N95 choosing the 8GB memory card as the install place. Current Software was: 20.0.015
    I downloaded and paid for the game "Creatures of the deep", which I like very well.
    I backed up my Phone with Nokia Backup utility, choosing all options of possible backups.
    I updated the phone with the Nokia software updater to version 21.0.016.
    I made a recovery with Nokia Backup utility, using the backup I made earlier.
    Result:
    Everything works:
    The Garming Mobile XT GPS program
    The Office Premium
    And other programs works perfectly fine.
    But:
    When I press the OK button to start up the N-Gage, (Blue), nothing happend. I tried starting it without any luck.
    So I tried unistall it, but ut does not unistall compleatly. The blue Icon stays.
    I tried reinstall it but I get the message, "File not found".
    I tried reset to factory default, but then I lost everything I had done, and all programs.
    So I made another recovery, but still the same problem.
    After reading threads after threads I am getting pretty frustrated since I can not get N-Gage to work.
    Now!
    Are there anyone with some cleaver solutions out there?
    Thank you in advance!

    Another user had this problem
    /discussions/board/message?board.id=smartphones&message.id=86818#M86818
    It's either firmware or ngage apps fault I think
    Feel free to hit the KUDOS button if you think I deserved it.........

Maybe you are looking for