IPC 5.0 API doc is not getting generated -: Note 809820

Hello friends,
I have setup development environment for IPC 5.0 on my machine.I used the information provided in PricingUserexitManualV102.pdf which is attached with SAP Note 809820. Everything looks set except for the fact that when i try to generate API documenation (*** <b>Activate the context menu (right mouse click) on
build_api_doc.xml and select Run As -> Ant Build</b> ***), then its not getting generated and i get the IOException. Please can some one guide me how to generate API docs?
Many Thanks,
Dipender Singh (Dips)

I have been able to resolve it. I just configured by path and java_home. ( it was done to setup installation of J2EE server slim edition). While doing this when i again tried to generate the docs it happened like .. as if using winzip.
Regards,
Dipender

Similar Messages

Billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc.

Hi All,
In case of billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc. no. Each time user has to clear the doc. manually. We have observed this issue after recent patch updation dated 22nd Feb’2014. Till 21st Feb’2014 the cancelled doc. has been cleared automatically against their respective billing documents.
Please guide.
Thank you.

Hi Gopi,
Please chheck SAP Note No. 1259505. It explains two ways in which SAP releases cancellation documents to FI.
OSS NOte 1259505 lists the possible causes from SD side &
OSS Note 309208 lists the possible causes from FI side.
Regards,
Kavita

FI Doc not getting generated at the time of Asset GRN

Hi,
We have created Asset Purchase Order.
At the time of GRN, FI Doc is not getting generated.
What changes need to be required from MM side (in OBYC)
Regards,

HI PK,
whether your PO Item have Single Account Assignment or it is Multiple Account assignment.
Check Distribution in Accoun Assignment Tab at PO item level.
If it is Single account Assignment, then Accounting Document will be generated at GR where if it is Distributed then, no Accounting Document will be generated.
In your case, Probably it would be distributed. and as a result of this your PO Item is marked as 'GR non valuated'.
Check its Delivery Tab. If it is the case, then need not worry as it is std practise. system will treated it as multiple account assignment and its valuation will only be carried out Invoice Verification level.
Later on check the Material document also.
Pls Note:
If flag 'GR non-valuated' is set in the purchase order, the valuation is only executed through the invoice verification. This flag must be set if the purchase order has multiple account assignment.
A valuated goods receipt for a purchase order with account assignment generates a posting line for the consumption account 'Account-assigned purchase order' (KBS) and for the GR/IR clearing account WRX.
hope it address your issue.
Regards,
S Anand

Profit Center Document not getting generated when direct FI doc is posted

Dear Experts,
Profit Center Document not getting generated when direct FI doc is posted. However CO Document is generated for Line Item 1 mentioned below.
Accounting Entry
Line 1 -Debit Expense ( Cost Center) 1000
Line 2 - Credit Bank 1000
Advance Thanks
Sanjai

Hi,
Pls check profit center configuration.... Some config might have missed.....
Use the t.code 1KE1 For analysing the profit center configuration.
Regards,
RAM
Edited by: Ram000 on Oct 7, 2011 10:45 AM

When opening a msword file wit .doc extension i get an error message: import error. The file format is not valid

when opening a msword file with .doc extension i get an error message: import error. The file format is not valid

Looks like. I tried in the TextEdit format tab to set all the combinations while opening the file, like plain text, rtf and html without success. Always I get the same signs.

Captivate 8: Getting this message "Unable to locate LMS's API, content may not play properly". Then I get a debug message of "44:Tue Feb 17 2015 : InIsLoaded, returning false". Has anyone else seen this?

Captivate 8: Getting this message "Unable to locate LMS's API, content may not play properly". Then I get a debug message of "44:Tue Feb 17 2015 : InIsLoaded, returning false". I also see a message in the preview pane when I view the .htm file in the project folder "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course." JavaScript is already enabled and I'm getting this in IE9 and Chrome 40....Has anyone else seen this?

The first part of your issue will be resolved if you load your course from an LMS. If you are not hosting your content on LMS, you can disable the reporting in your Quiz settings (Edit > Preferences > Quiz > Reporting).
Not sure about the Javascript related issues.
Sreekanth

Hi I opened a word attachment to an email on my gmail account and I don't know how to get rid of it so I can access my emails. When I tap the mail icon the word doc appears, not my email account. Does anyone know how to get rid of it?

I opened a word attachment to an email in my gmail account and now I can't get rid of it. When I tap the mail icon the doc appears not my emails. Can anyone help?

1. Double-click the Home button reveal the Task Bar
2. Hold the Mail icon down for a minute or two until the minus sign appear
3. Hit the minus sign to close the Mail icon

Billing Type Number range ( Accounting doc not getting generated )

Hi All,
I have created some billing types and for them I have assigned some internal number ranges. Now when I create a billing document it is getting saved with the proper number range but no accounting document is getting generated.
Also when I try to release the invoice I am getting an error which says " *Incorrect doc.no.: 10000009. Select document number between 0090000000 and 0099999999* "
K I N D L Y suggest as U R G E N T.
Regards,
Danny.

Hi
Check with t-code VOFA. Select the Billing document type, and Pick Detail Button.
Here you can see one field as Posting Block, check whether it is checkedup. If it is Checked you need to release the document manually. It Indicates whether the system blocks automatic transfer of the billing document to accounting.
Also check for the AcctDetermProc.
Hope it may work.
Award if useful to you.

When trying to convert a pdf file into a word doc, i only get the graphics but not the text. How do i remedy this?

When trying to convert a pdf file into a word doc I only get graphics but no text. What to do?

Hey hamsa142,
I think you are converting a scanned PDF to word.
You might need to run OCR first to make the text recognizable and then convert it to word.
Regards,
Anubha

Cisco Prime Infrastructure 2.2 Rest API XML does not add LF

I am using several scripts that dig the data from XML files created through Cisco Prime Infrastructure Rest API. It worked fine until 2.1. Now, with 2.2, seems Cisco stopped adding LF to each line and everything is 'one' line.
Here is an example with 2.1, there is a LF to the end of each line:
?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<queryResponse type="AccessPointDetails" rootUrl="https://server/webacs/api/v1/data" requestUrl="https://server/webacs/api/v1/data/AccessPointDetails?type=contains(UnifiedAp)&.full=true&.maxResults=1000&.firstResult=0" responseType="listEntityInstances" count="715" first="0" last="714">
    <entity url="https://server/webacs/api/v1/data/AccessPointDetails/1505569" type="AccessPointDetails" dtoType="accessPointDetailsDTO">
        <accessPointDetailsDTO id="1505569" displayName="1505569">
            <adminStatus>ENABLE</adminStatus>
            <apType>AP1240</apType>
            <cdpNeighbors>
                <cdpNeighbor>
                    <capabilities>Switch IGMP </capabilities>
                    <duplex>Half Duplex</duplex>
                    <interfaceSpeed>100Mbps</interfaceSpeed>
                    <localPort>2</localPort>
                    <neighborIpAddress>10.1.1.1</neighborIpAddress>
                    <neighborName>switch</neighborName>
                    <neighborPort>FastEthernet0/1</neighborPort>
                    <platform>cisco WS-C3560-8PC</platform>
                </cdpNeighbor>
Now, with 2.2, there is not LF anywhere:
?xml version="1.0" encoding="UTF-8" standalone="yes"?><queryResponse type="AccessPointDetails" rootUrl="https://server/webacs/api/v1/data" requestUrl="https://server/webacs/api/v1/data/AccessPointDetails?type=contains(UnifiedAp&.full=true&.maxResults=1000&.firstResult=0" responseType="listEntityInstances" count="715" first="0" last="714">
<entity url="https://server/webacs/api/v1/data/AccessPointDetails/1505569" type="AccessPointDetails" dtoType="accessPointDetailsDTO">
<accessPointDetailsDTO id="1505569" displayName="1505569"><adminStatus>ENABLE</adminStatus><apType>AP1240</apType><cdpNeighbors><cdpNeighbor>
Does anyone know, is this intentional or a mistake? Or is there a way how I control this?
I am reading on-line CPI Rest API docs, but seems cannot find anything.
Thanks,
Vlad

PI 2.0 is in Beta mode for testing in closed group already. However it may still take some time to get released on CCO for FCS.
I think it is expected to be released between aug-sep. BU has also started working on CPI 2.1, which you can see test uploads on CCO.
For what does it have for customers?
> As Cisco have a vision of one network Management software for both wired and wireless infrastructure, which started getting real partially with Cisco PI.
As WCS got evolved to NCS and eventually to Cisco Prime Infrastructure, but it doesnt yet have full Management capability for wired infra., which is there with LMS.
With CPI 2.x Cisco plans to blend entire LMS and WCS features together.
-Thanks

Looking for API docs

Hi all,
does anyone know where I can find the API docs for the package com.sapportals.portal.prt.service.notification esp. for the classes TopicDataContainer, TopicData and NotificationService?
Regards
Lars

Hi Ken,
Do you remember <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6961">the good old days</a>?! I always defended the point system, as in the early days, it was bringing much spirit into SDN, a bit like sports. There has been the time when Roberto, Rhich and me had a three month race, and for us it was sports, for the other users it was just luck to get that bunch of high-quality answers. These times have gone, the family spirit has gone etc.
Nevertheless, not everything is bad. Rhich and Bhanu are still very very active, others have come up, too; but annoying answers and disturbing content like we can see here are increasing - if one imagines SND without this stuff, it's still great of even better than it has been two or three years before. Anyhow, the stuff is there, imagination doesn't help...
I'm not sure how to change this, to conserve the good and to get rid of the bad. But I think that's also the problem of the SDN staff...
Best regards
Detlev

Someone rewrite the JMF API docs!

Anyone know if the data that comes out of an audio CaptureDevice is framed? Can it lose data (ie does it have a limited capture buffer?)
This really should have a device independent front end.
JMF is really, really bad. Unless you want to do absolutely nothing complicated or original. There's more to multimedia than streaming sound and video to or from a device. JMF is impossible to synchronise, or even get synchronised with. It does not define well the data it handles, and doesn't even interface well with the rest of Java!
This forum seems as useless as t*ts on a bull, unless you want to play and MPG from disk, which sux because the API docs for JMF leave out alot of information.

In case anyone here actually cares, I've given up. C++ here I come. Now it will take twice as long to develop but at least it will have some balls!

Pricing doc. does not exist in CRM Sales Doc Creation

Hello gurus
I am new to Sales within CRM and recently have set up the IPC.
The IPC communicates with the CRM Server without any issues. I have download all data required in the IPC.
When I create a new sales order in CRM all is ok apart from the conditions tab, this shows Pricing doc. does not exist. - Diagnosis
You tried to access pricing information. However, a valid pricing document is not available.
Any ideas?
System Details
CRM 4.0
IPC 4.0 SP16
Regards
Barry

Hi Barry,
Please check first whether a pricing procrdure is correctly defined under Spro->CustomerRelationship Management->Basic Functions -> Pricing ->Determine Pricing Procedures.
Here please check whether for the Sales Area(that you use in your order) an procing procedure is correctly defined. Otherewise pricing will not happen.
To explain about Customer Pricing Procedure and Document Pricing Procedure
The pricing procedure defined here in the above path is generaly a combination of 1)Document Procing procedure and 2)Customer Pricing Procedure.
Document Pricing Procedure - This is assocaited with the transaction type. Goto the transaction type details in spro and there you will find the association.
Customer Pricing Procedure - This is associated with thh Business Partner. Select the BP(in sold to party role) and select "Sales Area" tab and in the "Billing" tab you will find this information.
Note that the pricing procedure need not have both the Document Pricing Procedure and Customer Pricing Procedure defined.Any one can also be present. It depends on the business requirement.
In your case can you please check whether the Pricing Procedure is prsent at all.
Regards,
Abishek

Display name not getting generated When creating user thorugh GTC

We are using GTC flat file as a trusted source. We see that display name not getting generated. And same thing happening when creating a new GTC mapping.
previously when we ran with few test user got created with display name through GTC flat file , Suddenly we see this issue display name not getting generated through flat file recon.
Manually user creation has no issues.
Please let me know if you have any idea about this issue.

Don't use GTC... GTC is inflexible and buggy technology... Nothing guaranteed... Rather create your own custom trusted recon code...
For more details
26 Known Issues of Generic Technology Connectors
http://docs.oracle.com/cd/E10391_01/doc.910/e10360/issues.htm

Reports not getting generated

Dear All,
I know this is a repeat query but im unable to find information from the blogpost http://scn.sap.com/docs/DOC-41109.
I have earlier configured the WWI setup in a linux server. Now I am testing it on a windows server. I have made all the configurations in word and for generation server. The issue is, the report is not getting generated in report management screen and is in status Generation possible always.
When i check the wwi monitor, the doc type SBR is getting released but not getting completed. Please see the screenshot. CGSADM is working fine, RFC is working fine. I tried creating documents in CV01N and they are getting created. The DCOM settings are also good and activated the permissions there too. The DMS settings are set as per the SAP notes. However The job i scheduled is in status Finished for document generation. But when I try to generate the report, the report is created using a variant and the status of the report is in generation possible always. I checked the variant of the report and the validity is in REG_WORLD. I understand that there is some issue in the scheduled job.
I have scheduled only one job for Document Generation as follows.
a)Enter the job name - DOC GENERATION and choose a job class - A.
d) Choose Start condition and in the dialog box, choose After event.
e) Enter SAP_SYSTEM_START in the event field.
f) Activate Periodic job - HOURLY
g) Choose Check and save your entries.
h) Choose Step and choose ABAP program in the dialog box that appears.
i) Enter RC1WWIDS as the ABAP program name.
j) Choose Check and save your entries.
k) Before you leave the Define Background Job screen, you must save your entries once more.
Result: The job is started whenever the SAP system is started.
aFTER REPEATED ATTEMPTS, THE RESULT IS THE SAME AND NO CHANGE IN STATUS OF THE REPORT.
Kindly suggest what step am i missing . I have been through all the blogs in SCN. My old blogs are however missing and hence I am not able to access them.
I am using SAP GUI 7.30, ECC6 and EHP 5.
Regards
Dhinesh

Dear Dhinesh
Please help me to understand your system landscape.
a.) Did you have had a SAP EHS up and running together with a "linux server" based WWI version
and
b.) now you are switching the same SAP system to a "windows server" based version?
I am not sure about your screenshots. But you seem to have more than one gen server attached to the same system; did you updated as well WWI?
So no adaption of general SAP set up (like DMS etc.)?
Therefore any job scheduled (before afterwards) is done using a SAP account having the necessary access rights?
Can you please check this:
1.) create several sessions; one with WWi monitor and one with CG02; try to generate a different report for the same spec id (e.g. not MSDSUS in EN, but MSDS/FR) and check progress in WWI monitor as well as CG50
2.) select in CG50 the report in status "generation possible"; mark it and try to "go" on ; check access rights afterwards (su53)
I hate this status "generation possible". I believe you need to use "debug replace" to remove that entry; I can not remember any more but that was the only option to get "rid" of this entry
Please read WWI cookbook, There is a set up possible in such a way that any action on WWI server is "logged"; may be try to analyze the log file to get idea why there is no progress regarding the generation
PS: the problem you have detected is not related to the "validity area". It is a matter of communication issue between SAP and WWI server and the WWI process can not be finalized.
But you are not alone with your problem (e.g. check:
http://www.benxbrain.com/en/sap/program/RC1WWIDS-Generation-possible-status-not-changing-thread-1-1547841.htm)
http://scn.sap.com/thread/3311944
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/H-ESEWSRSTAT
https://scn.sap.com/thread/1575223
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/ehs-wwi-processing-272462
Check as well your own thread: http://scn.sap.com/thread/3304285
C.B.
PS: may be check: http://www.stechno.net/sap-notes.html?view=sapnote&id=1094307
as well as:
http://www.stechno.net/sap-notes.html?view=sapnote&id=580586
PPS I: logging feature of WWI is described here: Note 778684
PPS II: may be check: http://www.stechno.net/sap-notes.html?view=sapnote&id=1094307
PPS II: may be check as well: http://scn.sap.com/thread/3344033
and http://scn.sap.com/thread/1381004

IPC 5.0 API doc is not getting generated -: Note 809820

Similar Messages

Maybe you are looking for