IPC 7.0 executing the report CFG_AP_INITIALISE_DB

Dear Gurus
  I have configured my IPC 7.0 on 2004s platform and I have done all the steps sepcified in the IPC 7 configuration document( I have not created the RFC as we are using 2004s platform) made entries in the CRMCONSUM and CRMRFCPAR tables for IPC, registered the delta download event in TBE 31 and also given all the authorization as specified in section 7.
  When I run the CFG_AP_INITIALISE_DB report to initialize the database it stops immediately with the error message "Initialization of the configuration database stopped". Can you please tell me if I miss anything here. Also can you please clarify me if this would get all the pricing conditions and the knowledge base into IPC.
P.S : I am using the IPC here to display customer specific pricing in the product catalog in CRM 5.0 b2b ISA.
Thanks!
Vivek.

Vivek,
I've seen that you have posted this message in June. Were you able to resolve the issue? I have the same problem I've checked everything twice. My last step that I would try is OSS Note 921392 - Download of knowledge bases using XML mode. But before I implement that note, I would like to know what solved your issue.
Please let me know.
Thanks,
Patrick

Similar Messages

  • Performance Problem when executing the report for the first time.

    Hi,
    We have a Zreport...to improve the performance i created Index on few Data Base table..before my changes it used to take more than 15 minutes after the changes it taking less than 1 min for the same variant and for other variants also.
    But when executing the first in morning its taking the same time more than 15 min.Please let me know how to increase the performance when executing first time also,
    Thanks,
    Kiran.

    Hi all,
    Appreciate your valuable replies...
    @ Thomas: i do accept with your solution running a background job..but user is not accepting for it..thanks for your reply.
    @Siegfried Boes  : for testing purpose Im running this manytimes..but for user they may
    require when ever they need to know open oders.the volume of the data is barongs 300-350 at
    max.
    @Brad Bohn  : After creating the index the repose time reduced to half ...i hope  i have
    created a right index.
    Observation here...I executed the report in production system more than 5 times it took the
    same time, my changes are still in quality..so i think may be for selecting the right index
    its taking this much time.and for the next time is taking right index n doing it so it taking
    less.
    Do you accept it?.if so Please let me know how to explicitly say the select statement to
    use my index.
    Thanks,
    kiran.

  • Need a Syatem variable for Executing the report by RFC.

    Hi Experts,
    Need a Syatem variable for Executing the report by RFC.
    what i mean to say is,i can execure the report directly ...then no issues.
    But if i execute the Report by RFC ,then i should put a condition with system variable...
    Please suggest me ,how can put a condition when i am executing the report through RFC.
    Thanks
    Babu

    Hello Friend,
    what I understood that you want to put some extra condition if that report is getting called from RFC...
    you can use the system variable SY-CPROG....it will hold the value of the report when it is geeting executing directly...
    but when it is getting executed therough RFC...it will hold that RFC name...
    Thanks
    Krish

  • Getting different result while executing the report by debugger

    Hi All,
                I am facing a peculiar issue. When i execute the report from SE38 i am getting a particular set of values in a alv report.
    But if i start debugging the report by using /h and execute . i am getting another set of result. How does it happen any idea.
    Without debugger result is
    a
    b
    c
    With debugger i am getting result as
    a
    d
    e
    f
    What may be the reason . Kindly help.
    Thanks in advance.
    S.Velsankar

    Hi,
    you mean you have'nt change anything while debugging and results are different when ALV is displayed?
    I don't really understand your issue... Could you give more details?
    Kr,
    m.

  • Button on toolbar after executing the report i.e. after result display

    Hi, after executing the report result is being displayed.Now at this stage I want a button on the application toolbar clicking on which will allow a perform to get triggered.
    I tried in following manner:
    SELECTION-SCREEN: FUNCTION KEY 1.
    *INITIALIZATION.
    TABLES: SSCRFIELDS.
    *MOVE icon_mail TO sscrfields-functxt_01.
    *form SEND_EMAIL .
    IF sy-ucomm = 'FC01'.
         PERFORM SEND_MAIL_ASSET_STATUS.
    ENDIF.
    But it's not ok.The above way is not working.
    Please note: I want button on toolbar only after executing the report i.e. after result display.
    How can I do this?
    Kindly guide.
    Best regards.

    hi
    if you are using alv than just pass 3 values to function call
         I_CALLBACK_PROGRAM                = SY-REPID   " program name
         I_CALLBACK_PF_STATUS_SET          = 'STATUS'  "PF-STATUS
         I_CALLBACK_USER_COMMAND           = 'UCOMMAND'  " subroutine name
    and check the value of UCOMM in subroutine

  • Error while executing the report to display on the web in BI 7.0?

    Hi All,
    In BI 7.0, Getting Error while executing the report to display on the web?
    The error message displayed is:
    " Network Access Message : The website cannot be found ".
    Source: DNS error.
    Why this error is coming.
    Wht needs to be done.
    Thanks in Advance.

    Hi Kishore,
    All the configurations are in proper shape.
    We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
    Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
    EP is not configured over here. Is that causing the problem.
    Thansk in Advance.

  • Error while executing the report FAGLB03

    Hi,
    i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
    There is no active info structure for field catalog SAP_FI_DOC_003
    Message no. Q6504
    Diagnosis
    The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
    Procedure
    Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
    Please could some one help me on this issue.
    Thanks & Regards,
    Venkat

    Hi,
    Please refer the below note.
    1361304.
    Reg
    Madhu M

  • TSV_TNEW_PAGE_ALLOC_FAILED  error while executing the report

    Hi all,
    . We are having an info cubeXFIAP_C12 (FIAP: Vendor Line Item Open).In which we have defined 10 Dimensions and 6 Line Item Dimensions. We have created a report  on this with Key date as Input Variable Which gives me From Start to Till Date data. Also have an Variable on company code.
    Then No of Records in my Cube is 45, 70,624.Compressed the Info Cube data .But No aggregates on it.
    Now when I provide the key date as 30.06.2011 and Company code =XYZ.
    I am unable to Execute the Report, It gives me a short Dump. Saying NO ROLL MEMORY.
    Variables:
    1. Key Date:  Is a  Customer Exit variable .If user Enters Data as 30.06.2011 ,It fetches data from     u201C00000000u201D to u201C30.06.2011u201D.
    2.Company code: Is a Manual Entry /Default variable.
    I also have shot dump.Please find the error analysis of dump below:
    The internal table "\FUNCTION-POOL=RRK0\FORM=MEGA_SORT_M\DATA=C_TSX_SORTK[2]-GT
    ABIX[1]-GTABIX" could not be further extended. To enable
    error handling, the table had to be delete before this log was written.
    As a result, the table is displayed further down or, if you branch to
    the ABAP Debugger, with 0 rows.
    At the time of the termination, the following data was determined for
    the relevant internal table:
    Memory location: "Session memory"
    Row width: 4
    Number of rows: 1503307
    Allocated rows: 1503307
    Newly requested rows: 2048 (in 1 blocks)
    can any one help me .......
    Regards
    Laxman

    Hi,
    Just check following things
    1http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTMM/BCCSTMM.pdf
    2. See whether any back up process is happening and it has consumed the main memory.
    3. Are you getting this error regularly
    4. See any transport went and compression/aggregation got removed.
    5. Check whether there are many dumps in ST22 same time when you execute report
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4ab89e84-0d01-0010-cda2-82ddc3548c65?QuickLink=index&overridelayout=true
    6. http://www.sap-press.de/download/dateien/1049/sappress_bw_performance_optimization_guide_080.pdf
    7. Check whether Infoprovifder got removed from BIA
    8. Query removed from BIA post transport
    9. Run RSRT and regenerate the report.
    Thanks and regards
    Kiran

  • Message "No applicable data found" after executing the report

    Hi all,
    I have 60 records in a cube which is extracted from a function module. I am able to see the data in the cube but when I execute the report I am getting the message u201CNo applicable data foundu201D. Why is that so?
    Can any one please explain me what to do to bring data when the report is executed?
    When I execute the query there is only one field selection criteria 0P_FPVANT and this is mandatory. When I checked the data in the cube I didn't find any field 0P_FPVANT but I found a field Fiscal Period Variant with the technical name, 0FISPER
    I executed the query in RSRT and there also I am getting the same message, "No applicable data found".
    Please advise what do I need to do inorder to get data when the report is executed?
    Thank you.
    Regards,
    Pavan.

    I think so.
    Ok let me take the other report 0FIAR_C02_Q1003. For this report the selection criteria is
    Company code,
    Customer and
    Period/Fiscal Year
    Of these only company code is mandatory. In the data in the cube I see that for co. code BP01 data is available. So I executed the report with co. code as BP01 but no data.
    Then I gave co. code BP01 and Period /Fiscal year as 2008, 2008.03, still I see no data.
    I tried with values in all the fields that are available in cube
    co. code - BP01
    Customer - PCS-C10
    Period/Fiscal Year - 2008011
    Now with respect to Period/Fiscal Year selection field in report, in cube there are 4 columns
    Fiscal Year Period,
    Posting Period,
    Fiscal Year Variant and
    Fiscal Year
    I've tried all of them but when I enter values in all the fields still I am getting the same error, "no applicable data found".
    Please advise.
    Thank you.
    Pavan.

  • Executing the report in the background

    Hi Frnds,
    I want to execute a report in background.After executing the report I want to receive a mail.
    I think this is possible through reporting agent.
    so i need the steps for this how to do...pls do the need ful..waiting for reply..
    Thanks and Regards
    Rajasekar.

    Hi,
    there are two parts of it -
    a. you have some exceptions & you run report in background & are informed if exception occurs, for that kind of scenario look at -
    http://help.sap.com/saphelp_bw33/helpdata/en/d3/a850390aa3b608e10000000a11402f/content.htm
    b. Without exception you can play with WEb template & get informed -- I am not very sure.see this --
    http://help.sap.com/saphelp_bw33/helpdata/en/9e/9f653ade969f4de10000000a114084/content.htm
    If you are on BW350, it can be achieved by Information Broadcasting feature. see this -
    http://help.sap.com/saphelp_nw04/helpdata/en/a5/359840dfa5a160e10000000a1550b0/content.htm
    Hope it helps
    regards
    VC

  • How to know the User name and date, who executed the report last time.

    Hi All,
    We are collecting a list of reports which are not executed for past 3 months. Can anybody tell me how to know the username and date they executed the report last time.
    Is there any table to look ? or is there any process ?
    Thanks,
    Ravi.

    Ravi,
    Use SE16 - then look at rszcompdir.
    We look up Version = 13 for queries.
    Regards
    Gill

  • Portal asking for Login details again while executing the reports

    Hi Team,
    Our Portal is asking for Login details again while executing the reports individually.
    The issue is the if i enter the same PORTAL Login credentials, its showing as Authentication failed.
    PLEASE ADVICE ASAP.
    thanks & regards
    Sneha

    Hi Kiran,
    I have recently taken up this portal.. so not clear on the structure.
    however, I observed there was no user mapping available.. so i added the same with my login credentials..
    stil the issue persists.
    Please advice.
    Sneha

  • Can we execute the Reporting while the data is loading into that ODS/Cube.

    Hi Friends,
          Can we execute the reports on particular ODS/InfoCube in the following cases
    1) When the data is loading into that ODS/Infocube.
    2) When we are Archiving the data from that ODS/Infocube
    Thanks & Regards,
    Shaliny. M

    Hi Shaliny,
    First of all you are in the wrong forum, in Business Intelligence Old Forum (Read Only Archive) you will find better support.
    In case you are loading data in an infocube you will be able to have report only until the request that has the icon ready for reporting filled. In case of an ODS object i don't think you will be able to have valid reporting since the ODS data firstly needs to be activated.
    Nevertheless please post your question in the above link.
    Kostas

  • Error Executing the report

    hi ,
    I run a report from workspace and it runs fine for me. There is another admin who's trying to run the report and its throws following error for him:
    Error 5200: Error executing the query.
    We both have same privileges in shared services.
    I have created this new report.
    Just to let you know it worked fine when i created on 1st day for both of us and is now throing error.
    Thanks!

    Hi,
    Have the other admin turned on the preview option in the workspace financial reporting preferences.
    This sometimes can cause problems if it is turned off.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • SSRS Error while executing the report

    Hi,
    dataextension!WindowsService_0!7d4!03/09/2015-11:21:04:: e ERROR: Throwing Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: , Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: Failed to execute web request for the specified
    URL.
    Internal Server Error: The remote server returned an error: (500) Internal Server Error. ---> System.Exception: The remote server returned an error: (500) Internal Server Error.
    i can see the above log in reporting services log files, does anyone having the idea about this?
    Thanks
    Veera
    Thanks
    Veera

    Hi Veera,
    According to your description, when you run the report, you get XMLDPException and 500 error.
    In your scenario, I would like to know if you are running report in report server or SharePoint site. Does the error only occur when executing this report? Based on my research, the same issue occurs when using SSRS 2008. And the reason the IIS 7 defaults
    to Kernel auth mode. So if that is a case, please disable Kernal Auth mode for IIS and registering the SPN on the APPool account.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

Maybe you are looking for