IPC on CRM 5.0, SAP_AP 700

Hi All,
I have an installation of CRM 5.0 with SAP_AP 700 and have successfully enabled the VMC. I will need IPC because we are building an e-selling scenario. But I have not found a guide for this version of IPC (which has now been integrated). So my question is how do I configure the IPC in this version? Do I still need to create the RFC connections in CRM? How do I access it? If somebody could give me a light on this or point me to a guide for IPC on SAP_AP 700, I would appreciate!
Thanks and best regards,
Carina Maeiro

Having worked with both IPC 4.0 and 5.0, I will say that the newly integrated IPC is much nicer. No longer do you need to install any local software(besides eclipse for user-exits) and debugging is easier.
I agree with Andrew's post, simply find the OSS notes for IPC. They include a nice PDF which explains doing user-exits. I met the developer in germany who wrote it, he did a nice job.

Similar Messages

IPC in CRM 5.0 - Configuration guide

hello,
i'm looking for a configuration guide for IPC
under CRM 5 standalone (no R3 backend ).
thnx ..

Hallo Blackman,
Did you try working with the ´best practices'. currently we are using the BP for the CRM 5.0 implementation. This should be sufficient I suppose.
http://help.sap.com/bp_crmv150/CRM_DE/index.htm
Read the BP and it should be sufficient.
Regards,
Premchand.Kamarapu

Question about IPC for CRM 5.0

Hi ,
I have a question about CRM 5.0 with relation to the IPC .
As we know the IPC will be available internally from CRM 5.0 , but we would like to know if the internal IPC will be distributed with different applications or will it be one IPC for all the different applications .
Thanks in advance
BR//
Ankur

Hi Ankur,
See my reply in your another thread Question about IPC for CRM 5.0
Reward points if it helps!!
Best regards,
Vikash.

Why IPC uses CRM as database and not R/3 ?

Hi ,
can any one help me with an answer for the following question :
Why IPC uses CRM as database and not R/3 ?
Points will be rewarded for helpful answer
thanks
ritu

Hi
IPC have Sales Pricing Engine, Pricing Configuration engine and TTE which helps to maintain the similar R3 pricing settings. As you are aware pricing in R3 is determined by Sales area, Cupp, DPP, so IPC is capable of determining the Pricing using same R3 standard procedure. T
This is not available in CRM, so CRM needs IPC to undertake the determine pricing/ calculate the pricing of the products.
Regards
Nagarj

Problems with IPC on CRM

Hi, I have a CRM 4.0 system, when I try to create a SLA service contract, I get an error "No connection could be made to IPC", I guess this is normal because I didn't install an IPC server, my question is
Is possible to disable the IPC on the CRM ?
Or the IPC must be installed ?
Thanks

Hi,
You need IPC in CRM for prices. Please install the same.
Regards TVS

IPC in CRM 7.0

Hi Friends,
Currently we are on CRM 5.0, and here we use IPC which sits on the Java Stack. Now we are planning to upgrade to CRM 7.0 which has IPC as part of ABAP stack.
What happens to the IPC related data on CRM 5.0 which is on Java Stack when we move to CRM 7.0 ABAP Stack. How do we move this to the upgraded version.
Regards
Sadhu

HI Sadhu,
Please Check this excellent blog:/people/dheeram.kallem3/blog/2010/07/07/pricing-user-exits-in-crm
Hope this answers your question.
Regards
Sastri

IPC in CRM 5.0 Ramp-Up

Hi All,
We have installed CRM 5.0 on Windows and SQL server.
I understand IPC now works on SAP`s VMC.
I have configured the IPC as per the installation guide.
When I start the IPC from IE.
The error message I get is:
"start page disabled"
Please advice and help accordingly.
Rgs
Vikas

Hi,
Did you manage to resolve this problem?

Do we need IPC in CRM B2B Webshop for creation of ERP Sales order

Hi Experts,
can you pls guide in following scenario in CRM 7.0
We are using CRM B2B WEBSHOP, We are creating ERP SALES ORDER .
We have requirement to display price break up like base price, different discounts, taxes, freights while creation of Sales order on the webshop.
I would like to understand,
1) whether we need IPC to show price breakup in SALES ORDER in CRM WEBSHOP.
2) if yes, do we need enhancement at IPC to display complex discount types on webshop ?
3) do we need to download entire pricing ( customizing +condition records ) from backend ECC to CRM.
If anybody has worked on similer scenario ,requesting to help.
Any points , documents ,step by step guide will be highly appreciated.
thanks in advance,
regards,
PD

Hi,
ipc is inbuilt in Kernel to CRM 7.0
BR,
Darshan

Monitoring IPC in CRM 4

Hi ,
I need to monitor IPC which has been installed in a separate UNIX server.As pe SAP documentation .Only installing CCMS agent is available option.
But currently there is no monitoring facility available for IPC installed in UNIX host.SAP document says that CCMS agent has to be installed in windows machine and that should call / monitor the IPC in UNIX server.
They have also mentioned the window user should have auth to check IPC in unx machine.
I donot know how to get this setup.i have installed CCMS agent SAPCCMSR in windows machine but unable to monitor IPC at unix host
any help will be highly appreciated
Thanks
Gopal

Yes..both are mandatory components for Internet Sales. Refer to the Master Guide for CRM.
IPC is required for pricing and TREX is required for searching products.
Prakash

Activating IPC in CRM 5.0

Hi
We have just finished installing CRM 5.0. As per my understanding IPC is part of CRM 5.0. Now I want to activate it so that I can use it in my applications for pricing, configuration & taxation.
Please tells me the steps required to be performed to make it work fully. Also right now my CRM system does not have any data. How to verify that, now IPC is running properly or not.
Thanx in advance.
Cheers
Hits

Thanx guys!!! for ur reply. I have checked system VMC is working fine.
Now how will I come to know that SPE is working fine, since I haven't downloaded condition records into system.
Also when I look at middleware parameters, there are some parameters that need to be defined to run SCE. Also in basic settings in SPRO, we have to define RFC for dispatcher & SCE. Now as per notes no RFC needs to be defined for the same.
so shall I leave them as it is, & how to varify that SCE is also running fine, since again I haven't downloaded products from ECC.
Thanx in advance.
Cheers
Hits

IPC and CRM 5.0

Hi,
transfered some configurable products from R/3 to 5.0.
When I select the model in COMMPR01 and try start the simulation i only get a http error. Also get an error about missing configuration when I create an sales document.
The settings in COMM_IPC_URL should be correct. Did I need the J2EE Server or the IPC Web Applications for the simulation? Is there documentation for CRM 5.0 about the WebApps available? Only found something for 4.0.
Thanks

Hi,
still not answered??
Did you define the JCO-connection in ../ipc/XCM?
Regards,
Jens
<a href="http://help.sap.com/SCENARIOS_BUS2005/helpdata/EN/2B/CBB142C444C96AE10000000A155106/content.htm">http://help.sap.com/SCENARIOS_BUS2005/helpdata/EN/2B/CBB142C444C96AE10000000A155106/content.htm</a>

IPC in CRM 7.0: New customer field in item communication structure

Hi Experts,
I tried to enhance the IPC according to the known manual.
I created a new item related z-field in the item communication structure which I fill in the BadI IF_EX_CRM_COND_COM_BADI with a Char(1) value:
 IF cs_acs_i_com-zfield IS INITIAL.
 LOOP AT ls_prc_agrmnts_wrk-price_agreements_crm ASSIGNING <price>.
 CASE <price>-kschl.
 WHEN 'ZFRE'.
 cs_acs_i_com-zfield = 'B'.
I also did the customizing for that new formula which is a requirement. There I added two attributes to the implementation:
-ITEM_GUID Item GUID
-ZFIELD Z-Field
and also two attributes to the formula:
-ITEM_GUID CRM_ITEM_GUID
-ZFIELD ZFIELD
I use this requirement in my pricing procedure and uploaded the jar file. My java code looks as follows:
import com.sap.spe.condmgnt.finding.userexit.RequirementAdapter;
import com.sap.spe.condmgnt.customizing.IAccess;
import com.sap.spe.condmgnt.customizing.IStep;
import com.sap.spe.condmgnt.finding.userexit.IConditionFindingManagerUserExit;
import com.sap.spe.base.logging.UserexitLogger;
public class ZFreiStBLP extends RequirementAdapter {
 private static UserexitLogger userexitlogger =
 new UserexitLogger(ZFreiStBLP.class);
 public boolean checkRequirement(IConditionFindingManagerUserExit item,
 IStep step, IAccess access) {
 String item_guid = item.getAttributeValue("ITEM_GUID");
 userexitlogger.writeLogDebug("Item: "
 + item_guid);
 String zfield = item.getAttributeValue("ZFIELD");
 userexitlogger.writeLogDebug("ZFIELD: "
 + zfield );
 if (pauschale != "B"){
 return pauschale.equals("");
 }else
 { return pauschale.equals("X");
In SM53 i can see the logs, but the problem is that obviously only the standard field ITEM_GUID is available in the Java. Means, that for my z-field I never get a value although the BadI is called an the value is written to the communication structure.
Does anybody has an idea, why I do not get the value of that zfield in my java code?
Thanks a lot!
Regards,
Mireille

Hello Vinod,
I have customised complete pricing procedure but in the Quotation order we are not getting NET VALUE.
When i come accrossed with BBP_CHECK_CND_CUST In my findings i found parameter IPC_ON is missing.
I am waiting for the reply from BASIS.
Is there any functional customisation required for IPC let me know.
Best Regards,
Sathyadev

Variant Configuration / IPC in CRM 7.0

Hi experts,
We are getting runtime errors when we access the Configuration tab in CRM transaction CRMD_ORDER for a configurable product. These errors do not occur when we simulate the model in COMMPR01 for the same product. Any ideas? Here are a couple of things to note:
- The runtime errors occur in the Configuration page itself and does not provide any more information; i.e. we only receive a page with the lines saying "Runtime Errors", "Contact the Administrator", and "Log In". The Log In link does not work and there is nothing in ST22.
- Simulating the model in the product master consistently works.
- When using CRMD_ORDER, the configuration has worked on rare occasions but will timeout rather quickly; i.e. after a characteristic is changed it might give the message to log in again.
- Custom versions of both CRMORDERMAINTAIN and CRMPRODUCTSIMULATION are maintained in COMM_IPC_PROP, and the URL is correct in COMM_IPC_URL.
- The product was replicated from ECC as a knowledge base via object SCE.
Thanks in advance!
John

HI ,
Are you using a secured port?
Try making the SSL enabled setting in the XCM as "FALSE", you can find this under the General Application Setting of the XCM,
let me know if it works.
Restart the java and application once the change is done.
Thanks
Dushyanth
Edited by: vishwas sahu on Sep 23, 2009 8:49 AM

IPC for CRM 5.0

Hi Experts,
In CRM 4.0, to view analysis on Pricing tab we need to set parameter in COMM_IPC_URL table.
UI_ANALYSIS --> http://<J2EE_server>:<port>/pricing
In CRM 5.0 above setting is still valid?? from where can I get <J2EE_server>:<port>
Thanks in advance.
Deven.

Deven
I hope it is same in SAP CRM 5.
Thanks
Jack
Allot points if my post helps !!!!

Patching CRM online only

Hi all
We have a CRM 2007 (ABAP only). We want to patch the middleware only without the Mobile Clients on the laptops of the sales representatives. Could someone tell me please which components I can patch without having to patch the CRM Mobile Clients? All except BBPCRM?
We are using the following components:
SAP_ABA         700      0016     SAPKA70016    Anwendungsübergreifende Komponente
SAP_BASIS     700      0016     SAPKB70016    SAP Basiskomponente
PI_BASIS         2005_1_700      0016     SAPKIPYJ7G   PI_BASIS 2005_1_700
ST-PI   2005_1_700      0006     SAPKITLQI6    SAP Solution Tools Plug-In
SAP_BW          700      0018     SAPKW70018   SAP NetWeaver BI 7.0
CRMUIF           600      0004     SAPK-60004INCRMUIF            SAP CRM UIF 600
SAP_AP           700      0013     SAPKNA7013   SAP Application Platform
BBPCRM         600      0004     SAPKU60004   BBPCRM
Thanks in advance for your help!
Regards
Marco

Hi,
the generation which you probably mean is done with Tx smoggen or smogtotal or gnrwb.
This only generates the function modules but does not affect the BDoc definitions themselves.
Only after the activation/generation of a BDoc definition some steps on the MSA clients need to be done (generating of new version of TPS.NET file).
Regards,
Wolfhard

IPC on CRM 5.0, SAP_AP 700

Similar Messages

Maybe you are looking for