IPCC extension doesn't ring when agent on a call on primary extension

Hi everyone.
Hopefully this is a nice easy question. Our CCX agents have both a primary and IPCC extension.
The trouble is, when the agent is on a call on their primary extension, if they're selected by the CSQ, the call stays reserved and doesn't actually ring the handset. So the agent doesn't have the opportunity to disconnect the (non-IPCC) call they're on. This is reflecting badly in their stats.
Is this the expected behaviour? I wondered if it was because technically they are busy, just not 'IPCC busy'. If this is what should happen by default, can this be overridden?
Any advice would be greatly appreciated.
Thanks!

Hi Chris, thank you very much for replying to my query.
Yes everything works fine when the agents are not on the primary line. I've also verified the ring settings and they look as they should. Looking at the line settings, for both they are set to busy trigger of 2, and max calls 4.
I've since found out some more information. Our helpdesk re-created the issue, in that test we had three agents available. One user was asked to use their primary line, which they did and kept active. The appropriate trigger for that CSQ was called from an external mobile. A few calls were made, until it ended up being queued. For the agent that had their primary extension active, on their agent desktop they could see the call reserved for them, however they could not retrieve the call at all. Apparently the stats are being affected because we have an SLA of answering the phone within 10 seconds, from what I've been told, it looks like it's been ringing for long than that while the agent is reserved.
I've only just been informed about this issue, and one question I had was if the user could retrieve the call if they then hung up the primary line, but they unfortunately didn't test that as of yet. I'm awaiting word back when they can.
Thanks again for your help!
Scott

Similar Messages

  • My phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

    my phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • Agent stay in Ring when agent not answer

    Hello,
    how long agent stay in ring  when agent not answer  before forwarding to the next agent?
    Is it possible to change the time?

    Hi,
    in UCCE: check the Agent Desk Setting (in Configuration Manager) for the particular agent, "Ring no answer time".
    In UCCX: check the Timeout parameter in the Select Resource step in your script.
    Either way, the value on the UCCE/UCCX side must be lower than the Forward No Answer timeout in CUCM.
    G.

  • TS3367 My iPad doesn't ring, when I get a FaceTime call. How do I turn on the ringer,...???

    My iPad doesn't ring, when I get a FaceTime call. How do I turn on the ringer,...???

    This is very easy to resolve in 3 easy steps. goto
    1. settings
    2. general
    3. where it says 'Use Side switch to'  you will see two choices
    a) Lock rotation
    b) Mute
    Mute will be ticked if you are not getting a ringtone when someone calls you on Facetime
    Simply Click on 'Lock Rotation'
    Lock Rotation will now be ticked
    Mute will be unticked.
    Facetime calls will now ring your iPad2

  • My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls

    My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls
    i have tried manythings but it doesn't work
    i put it in silent mode and i found my calls comes normaly and it works good but when i turn on ring mode it's back as it how can i fix that ?!

    Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device.  Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.

  • My phone randomly doesn't ring when people call and not sound the text alert. I checked all the settings and them seem to be correct. Anyone know how to fix this?

    My phone randomly doesn't ring when people call and not sound the text alert. I checked all the settings and them seem to be correct. Sometimes it rings, many times it doesn't. I have missed several calls. Same with texts. Anyone know how to fix this?

    Symptoms
    No ringer sound
    Go to Settings > Sounds > Ringtone and select a ringtone. Does the device ring? (YES: Issue resolved) (NO: Go to step 2)
    Go to Settings> General> Reset> Erase All Content and Settings. Warning: This will delete all user data on the device. Verify that you have a backup before proceeding. Go to Settings > Sounds > Ringtone and select a ringtone. Does the device ring? (YES: Issue resolved) (NO: Go to step 3)
    Restore device using latest version of iTunes. Go to Settings > Sounds > Ringtone and select a ringtone. Does the device ring? (YES: Issue resolved) (NO: Contact Apple for service options)

  • HT5278 i did this update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though! ne1

    i did the ios5.1.1 update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though, and for my alarm. ne1 else had these problems?

    I have had this happen to me on 3GS, 4 and 4s.   Usually the solution is one of the following:
    1-  If  your volume indicator says  headphones even though they are not plugged in, then:
    Stick your headphones into the headphone jack and then remove quickly.
    2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
    3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
    Hope one of these works for you

  • My iPad 2 doesn't ring when there are incoming FaceTime calls. This problem started when I updated to iOS 8.1.  IOS 8.1.1 didn't correct this problem.  Any suggestions?

    My iPad 2 does not ring when receiving incoming FaceTime calls since updating iOS 8.1.  iOS 8.1.1 has not helped this problem.  I checked the settings to make sure Restrictions were off.  I cannot find anyplace that turns sound notification for FaceTime on or off.
    Any suggestions?
    Thank you

    In spite of the fact that you said you checked the settings, I still believe that you have system sounds muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085
    AS for your other issues, have you done any other troubleshooting like resetting your iPad, resetting all settings or doing a complete factory reset?

  • Since last upgrade my phone won't ring when I get a call or text message

    Anyway to get phone to ring when I get a call or message. Since the last upgrade it will only ring occasionally

    Hi BrendaQ,
    Thanks for visiting Apple Support Communities.
    If your iPhone does not ring when you receive calls or messages, start with these steps:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    You can find the article with these steps here:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Best,
    Jeremy

  • My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc)

    My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc) I can't find why.
    I trieds to go on Youtube and for that I have sound so it is just for the rings.
    Can somebody help me please?
    Thank you so much!
    Mary

    Have you checked your mute switch (right above the volume buttons)? If you see orange, it is muted and will affect the rings, but not the audio on YouTube.
    Just toggle the switch so you don't see the orange and check again.

  • I have 1 apple id, 2 5S iPhones with separates numbers and both ring when I get a call on one of the numbers. How do I switch that of ?

    I have 1 Apple ID, 2 5S iPhones (1 private/1 work) with separates numbers and both phones ring when I get a call on one of the numbers. How do I switch that of ?

    I realize that my wife could make her own iTunes account; however, she's been using mine for about 2 years now and this hasn't been an issue.  I guess with the Family Sharing she can have access to all of our music and apps now with her own account. 
    I'll have to see if unchecking our emails resolves this issue.

  • Does not play correct ringtones that are set for the Caller and Rings when no one is calling

    I have had my Droid Global for around and three months and from the beginning I have had issues with the ringtones ringing when a certain person calls me. Instead, it seems, it will play the rigntone that is applied to the last person that called me instead of the person who is actually calling me.  This can be somewhat frustrating and kind of defeats the purpose of applying rigntones to people in the first place.
    Also, just recently my phone has decided to ring all by itself...without any incoming calls, notifications...nothing. It does a very quiet ring that sounds similar to that of a house telephone or landline phone. It does not stop unless someone calls me or if I take my battery out and reset my whole phone.  My phone has only done this twice and unfortunately it once happened in one of my college classes and I couldn't get it to stop.
    Please help me...I don't know what I can do to fix this!!!

        Hi Cargo23,
    I am sorry to hear you're having issues with your phone not ringing. In what zip code were you located when this issue occurred?  Are you using your vehicle's bluetooth when this happens? Please try a soft reset to refresh your connections http://vz.to/1nLXk5g.
    Thank you!
    EdW_VZW
    Follow us on twitter @VZWSupport

  • My sister's iphone volume will not go up or down and her ringtones do not ring when she gets a call what should she do?

    My sisters Iphone volume buttons do not work and the phone does not ring when she gets a call yet when she is in settings. What should she do?

    Hi,
    If it's Not the Silent Switch...  Try a Reset of the Phone...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 10 - 15 Seconds...
    Turn the Phone On...
    Cheers,

  • Why does my Iphone 5 ring when I get a call, but can not figure out why there is NO sound when I get a text?

    Why does my Iphone 5 ring when I get a call, but can't not figure out why it does not make a sound, when I receive a text or typing???

    Deborah,
    The solutions on here did not work for me.   I tried.....
    I have the same problem with a BRAND NEW iPhone 5c version 7.1- no sound when a text message arrives.
    (1) I have "do not disturb" scheduled correctly.   No partial moon on the main screen near the time and battery indicator.
    (2) I have the ringer icon correct with no slash.    Yes I turned the hardward mute switch to the UP position (ie the one above the + and - buttons on the left side.   I tried messaging with the bell as shown and bell with a slash and neither work.   The mute switch is not red (switch above the + volume hardware switch)     I enabled some assistant using the Settings menu.    And I press the dot (looks like a target symbol) and go to Devices and I can see what position the bell is in....either a bell with a slash or no slash.
    (3) Yes ringtones are configured for text and other. I can hear them when I am under settings > sounds.   But they do not link with the actual hardware.
    (4) I rebooted the iPhone 5c by using the button at top, slide the red bar, then pressed it again, apple came up for a minute and it seemed to be back up.
    (5) I upgraded the IPhone 5c from 7.0.4 to 7.1 using my pc and itunes.   And the upgrade was successful but did not fix the text issue.
    (6) I do not have it in airplane mode or silent mode.
    (7) I reset all settings using Setttings > General > reset > reset all settings .  this wipes settings but not data and media.
    This is really frustrating.

  • FaceTime does not ring when or recognize a call when it comes in. The volume on computer is fine; when I make a call it works perfectly. whenever anyone calls, its dead.

    FaceTime does not ring when or recognize a call when it comes in. The volume on computer is fine; when I make a call it works perfectly. whenever anyone calls, its dead. In systems prefernce, I have alerts selected. Can someone please help?

    In settings, tab to "Do Not Disturb". Make shoure it is not turned on.
    If this dosn't work, please tell me what version of iOS you are running.
    Do this by going to Settings > General > About. Look under "Version"

Maybe you are looking for

  • VAT number Thailand skip

    Hi, I am configuring VAT input tax for country thailand in ECC 6.0 release. The official VAT input number is generated correctly on document header text. But the number is always skip by 1 number when i do a posting via FI (eg vendor invoice, documen

  • How can I program my imager to take longer samples using labVIEW?

    What I would like to be able to do is to use LabVIEW to program my external hardware to take a sample length of a specific time. I would also like to be able to find out how fast my Imager is sampling at, kind of like using the program as an oscillis

  • Calling Standard program in Z report

    Hi, Zreport is calling the MB5B Transaction program ( rm07mlbd ) using the submit statement. Here i have to take the values of Total/Val. of Receipts & Total/Value of Issues and do the some extra calculation in ZREPORT. But when i used the below stat

  • Trial Download of Crystal Reports 11

    I am attempting to download a trial of Crystal Reports 11 that a product specialist sent me.  When I go to the link he sent, the product immediately starts to download - I do not have the option to "Save" or "Save As" and download the file to my desk

  • How to install Microsoft Lync on Curve 9380

    Hi All, I recently got my BB Curve 9380, ever since I got my BB I have been trying to install Microsoft Lync on my device with no luck at all. I did some searching on Google and ended up at http://us.blackberry.com/apps-software/server/exchange/ocs20