IPCC extension option not found under End user on CUCM

Hi
I have a new deployment for UCCX express with CCM V 9.1, when i am trying to go under End user to assign the extension which will be user for IPCC , unfortunately i did not find IPCC extension option , i only find primary extension .Please help. I am unable to see the tab of IPCC extension , only find the selection for primary extension.The integration already done , everything is ok between CUCM & UCCX. + phone services for IPCC subscribe for end users
Thanks

Hi
+5 for MR/Chris
1- This is famous for fresh installation , especially on Vmware , kindly try to ssh CUCM and type the following:-
admin:run sql select paramname,paramvalue from processconfig
where paramname like '%nstalled%'
Thanks
Please rate all useful information

Similar Messages

Startup items options not found under user name

I'm sure this has been covered before, but I couldn't find an exact match.
Under the accounts setup-one of the profiles does not have "Login Items" as an option, only has Password, Picture, and Parental Controls. I have full access as administrator to all accounts. How do I get the Login Items Options to show up?
On a larger issue, the reason I would like to access the user account login items is to turn on DirectfonfigX for that login, the particular login will not work with a DVI connection. (Display may be set to VGA, I don't recall the exact reason why it does not work with the same DVI connection as normal login user. they are basically the same user profiles, but I can access some software under one user that the other user will not recognize that I have registered my software, or profile settings. But perhaps that is an even larger issue.)

Sam,
Just ran a test here--Login Items are only available for the currently logged in account (owner of the keyboard/mouse/display). You'll have to log in as each of those users and set the login items appropriately. Seems that an admin should be able to set these but not so.

Safari 5.0 - Disable local file restrictions Option not found under Develop Menu

Hi All,
My system specs are as follows :
Platform : Linux
OS : lubuntu
OS Version : 13.10 Saucy Salamander
Browser : Safari 5.0
I need to open a html file in Safari before which I need to enable this option - "Disable local file restrictions" under Develop menu as available in Safari 7.0 for OS X Marvericks.
Problem here is I am not able to find this option in Safari 5.0, also I am not able to find any way to upgrade Safari in Linux.
Please suggest how can I activate this.

Safari->Preferences->Advance->on the bottom. To get the Debug menu which includes a listing of Keyboard & Mouse Shortcuts, among other useful things, run this in the Terminal app and quit & relaunch Safari:
*defaults write com.apple.Safari IncludeInternalDebugMenu 1*

Tablespace Option not found under Storage Menu (OEM 12c Express)

Hi Guys,
Am not able to see the Tablespace option under the Storage menu in ORacle enterprise manager express 12c.
Is there anything we need to configure for that? any ideas please help me?
Thanks,
Sunil

Hi Guys,
Am not able to see the Tablespace option under the Storage menu in ORacle enterprise manager express 12c.
Is there anything we need to configure for that? any ideas please help me?
Thanks,
Sunil

Extension Composite not found in kde

since i modify look n feel of default kde, when i start a session i get this error message:
Extension Composite not found you should be Xorg uses <6.8 in order that it works the translucent effects and opaque Besides can need to add a new section to the file of configuration of X: SECTION "EXTENSIONS" OPTION "COMPOSITE" "ENABLE" END SECTION.
i can work without a problem, but it bothers get that message in the start
thnxs in advance!!

add this section to your /etc/X11/xorg.conf
Section "Extensions"
Option "Composite" "Enable"
EndSection
btw, this message appears when you are using kompmgr (kdes own effects). Beware, its quite unstable and buggy ;)

How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
to Public URL = "proxy URL".
In Host Named Site Collections, alternate access mappings are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
URL is associated. This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
point HNSC to respond to a different URL(proxy URL). Consequently, Share Point URLs are exposed to external users.
Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If hiding the internal Share Point URLS is a requirement,
it suggests to use a web application instead of host named site collections.
Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
Excerpt from above article-
"Host Named Site Collections Only Use One Host Name
Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
are always considered to be in the Default zone. This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
calls to the same URL. If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

Hi Satish,
You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
It is by design that each host-name site collection only support one URL for each zone.
The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
https://support.microsoft.com/en-us/kb/2826457
So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error initializing ejb-module; Exception javac.exe not found under

Dear all,
I got followings error after i had tried to doing some lab.I had checked the folder "C:\Program Files\Oracle\jre\1.3.1" exists but missed but missing javac.exe. Could anyone can advice me what is going wrong?
04/04/14 16:44:20 Auto-deploying - web/WEB-INF/classes (No previous deployment found)...
04/04/14 16:44:20 Error instantiating application 'lab04' at file:/C:/share/oc4j
/labs/lab04/: Error initializing ejb-module; Exception javac.exe not found under
C:\Program Files\Oracle\jre\1.3.1, please use a valid jdk or specify the locati
on of your java compiler in server.xml using the <java-compiler .../> tag
Thanks in advance!
Best Regards,
Chris CHIU

Dear Chris,
The answer lies in the error message you got, namely:
please use a valid jdkAccording to your post, you don't have a JDK, you only have a JRE. The javac compiler is part of the JDK, it is not part of the JRE.
You can download the JDK from the J2SE Download Web page. Look for the Download J2SE SDK link -- do not choose the Download J2SE JRE link!
Good Luck,
Avi.

Aurbuild saying "package not found under /var/tmp/aurbuild/pkgbuilds"

Hello everyone
I am using aurbuild for installing aur packages. Since some time now, I keep getting the error message:
package not found under /var/tmp/aurbuild/pkgbuilds
For example the exact message is:
lib32-pciutils not found under /var/tmp/aurbuild/pkgbuilds
No result found
What can I do about that?
Thanks in advance
b1

Please see our Forum Etiquette regarding bumping b1: https://wiki.archlinux.org/index.php/Fo … te#Bumping
Have you tried if the same thing happens with other packages and AUR-builders?

In nokia C7 integrated GPS option not found in pos...

In nokia C7 integrated GPS option not found in positioning method
Attachments:
Scr000001.jpg ‏14 KB

@shajjeel
AFAIK this would only occur in device originally destined for sale in Syria.
Happy to have helped forum with a Support Ratio = 42.5

Thanks for the Firefox 4 upgrade. Here is my concern - Previously, the "Check for updates" option is found under the Help menu. In Firefox 4, I cannot find this option; how will we be able to check if there are available updates?

Previously, the "Check for updates" option is found under the Help menu. In Firefox 4, I cannot find this option; how will we be able to check if there are available updates?
Can this new version update itself automatically? How do I set this option?

Why do developers move stuff just to move it?

Personal Hotspot option not found on my iPhone 4S Using airtel?

Personal Hotspot option not found on my iPhone 4S Using airtel connection. Do any one wat may be the reason?

I had the same issue
Go to Settings / Cellular / Cellular Data Network, scroll down and you will see PERSONAL HOTSPOT.
For APN I used 'internet'.
The password came in automatically
All was restored then

Form Designed in LiveCycle will not work for End User

Please Help!
I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms. After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help. So here's the deal:
I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms. The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera. The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken. The second subform is basically an image field and text fields used as photo captions/photo compilation pages. When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)). Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells. I was able to find a script to correctly populate those fields for each instance of the table. Wish I had the form here, but it's at work at the moment.
My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview. I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X). I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly. However, once they save it, it gets all jumbled and they can't even print it. We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work. I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
Anyone have any thoughts on my long explanation?? Please HELLLLPPPP!

The error(s) occur when trying to save the document. I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:" ---> Then click the "Submit" cmd button. That should expand the table. Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table. Then the user will populate each cell of the table on page 1 with data. The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1.
The problem is in the distributing of the form to the user so they can save the form after populating the data. I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos). However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document. Then re-opened the copy in Acrobat Pro X. The new copy:
-had 5 additional rows added to Page 1
-Duplicates of some of the fields
-Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
Again, this all works fine in the LiveCycle Preview but not anywhere else. I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons. I also do not want to distribute this form to end users and then collect the data back from them. I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

Native Android Extension - Service Not Found

Greetings,
I have created an AIR native extension which I am using in an AIR for Android app. My native extension needs to use an Android Service from a 3rd party library. However, seemingly no matter what I do to hook up this Android Service in the native code, the app reports "Unable to start....service not found" at runtime.
Now I have used this service in normal, native Android apps and it works fine - I have tried duplicating the same startup process from my previous apps, that process still results in a "service not found" error in this AIR for Android app.
Does anyone know whats going on here, or had similar issues?
My only thought at this point is that the intense mangling that happens when AIR compiles an APK might be screwing up the path to the Service, therefore the class loader on the Android device is unable to find the service at runtime. However, I do not know how to prove this hypothesis.
I have gone as far as to write my own Service class which wraps around the 3rd party service, so that the service I'm requesting is in the same java package as all the other native extension code I'm writing, but that option didn't work either.
Any help would be appreciated.
Thanks.
Matt
PS - In case you're wondering, I did make sure to declare the <service> tag in my extension's manifest file.

Hey Chris!
I figured out *JUST NOW* what the issue is (and this is certainly NOT documented in any PDF, or whitepaper on Native Extensions).
The problem lies with both the Signing Certificate and the package name for your AIR Application.
Rules for Adobe AIR Native Extensions
Rule 1 (Documented)
The Code Signing Certificate package must match the application id in your app.xml
so if the certificate package is `com.my.company`, then the air app id must be `<id>com.my.company</id>`
Rule 2. (Partially Documented)
When packaging a native extension for android using ADT, a prefix is added to your package name so it looks like `air.com.my.company`.
(Not Documented)
When the Android ActivityManager tries to run your service it looks for it in `air.com.my.company`. Thus, the Service class must live in the same package (including the 'air' prefix) within your java code. My TestService class now is defined as `air.com.my.company.TestService`
And with the following manifest, it runs just fine!
<application>
          <activity android:name=".TestActivity">
                    <intent-filter>
                             <action android:name="TestActivity"/>
                              <category android:name="android.intent.category.DEFAULT"/>
                    </intent-filter>
          </activity>
          <service android:enabled="true" android:exported="true" android:name=".TestService">
               <intent-filter>
                                       <action android:name="test.default.service"/>
               </intent-filter>
          </service>
</application>
Start the service using the following code
startService(new Intent("test.default.service"));
Thanks again!
Bow

Netbeans not running under root user

I noticed that after installing Netbeans under user 'root', I'm able to use it under my user account, but it doesn't launch when I'm logged in as root. I'm running Arch x86_64 with XFCE in VirtualBox. Everything else works, including:
Firefox
Pidgin
Eclipse
SRWare Iron browser
It's not a big problem but when I'm logged in under my user account I can't install new plugins from inside Netbeans.
I tried running it from the command line but nothing happens, including when I try "sh netbeans -verbose".
I"m curious why I'm unable to start Netbeans when I'm logged in as root. Has anyone else experienced this?

Maybe you should reinstall it "as user" if you're experiencing problems with plugins installation.
Edit: IIRC you can use xhost to let root run GUI apps.
Last edited by karol (2010-09-01 22:26:09)

Flash player does not work under one user account.

Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FS

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

IPCC extension option not found under End user on CUCM

Similar Messages

Maybe you are looking for