IPCCX jtapi, add cluster and trigger error

hi,
during the installation of ipccx (HA deployment) i found difficulty in adding the cluster and making the trigger. on start it gave me the error of jtapi resync.when i tried to resync it it gave me error (jtapiresyncerror1.jpeg).so i tried to resync it manually by stoping the crs node manager and installing the jtapi client for windows from ccm. but after opening the appadmin application again it gave me error of jtapi sync (jtapierror1). for clustering ipccx1 components are working but when i tried to enable the components of ipccx2 it gave me error (errorafteripccxcomponentactivation1.jpeg)..you can also see other jpegs for reference..it is showing the replication status of unkown.
then i tried to add the script and application but when i entered the trigger information it gave me error "could not update the user on unified cm" (trigerror1.jpeg)..
Regards
Naresh

hi,
I haven't tried to install only the second server.. i have time so i reinstalled both the first and second server..following was the sequence
IPCCX installation:
1)install operating systems for first server.
2)install ipccx dvd for first server (after ipccx dvd installation initial setup window will open automatically.. no need to configure it..just close the window)
3)install sql server..
4)now open app admin page and do initial setup..
5)install operating system for second server.
6)install ipccx devd for second server (after ipccx dvd installation initial setup window will open automatically/.. no need to configure it..just clost the window)
7)install sql server
8)now open app admin page of second server and do initial setup..
hope that it helps..
Regards
Naresh

Similar Messages

6398 ERRORS Cache cluster is down, restart the cache cluster and Retry. Collection was modified; enumeration operation may not execute.

Recently started getting these 6398 errors with SharePoint 2013 Single Farm and haven't been able to fix with any google results. Everything seems to run fine. They usually appear overnight. Average 5-9 daily event logs. See
Errors below.
Get-CacheHost
always reports UP
Have already tried:
- Upgrading to AppFabric CU5
- Restart-Service AppFabricCachingService
- Clear Configuration Cache
- habaneroconsulting Distributed Cache Bug
- nobadthing Unexpected exception in feedcacheservice
- mmman itgroove fixing the appfabric cache cluster
- Microsoft unable to start appfabriccachingservice
- dhasalprashantsharepoint lets-troubleshoot-sharepoint
...and many other readings. (sorry I cant post links even though I verified my account 100 times)
Errors:
The Execute method of job definition Microsoft.Office.Server.UserProfiles.LMTRepopulationJob (ID 414cbbe9-cdb1-4f7a-beed-85fbfd8a10c7) threw an exception. More information is included below.
Unexpected exception in FeedCacheService.IsRepopulationNeeded: Cache cluster is down, restart the cache cluster and Retry.
The Execute method of job definition Microsoft.Office.Server.UserProfiles.LMTRepopulationJob (ID 414cbbe9-cdb1-4f7a-beed-85fbfd8a10c7) threw an exception. More information is included below.
Unexpected exception in FeedCacheService.IsRepopulationNeeded: Connection to the server terminated,check if the cache host(s) is running .
The Execute method of job definition Microsoft.SharePoint.Administration.SPProductVersionJobDefinition (ID 95aee52d-88a1-4355-b6b6-9d43d753414e) threw an exception. More information is included below.
Collection was modified; enumeration operation may not execute.

Hi,
Please firstly go to Central Administration > Application Management > Manage Services on server, make sure the Distributed Cache service has been started on all servers.
If you execute Get-CacheHost and Get-Cache in SharePoint 2013 Management Shell, is it return the expected information? If it returns the red error message, please refer to the article below to remove SPDistributedCacheServiceInstance and add SPDistributedCacheServiceInstance.:
http://blogs.technet.com/b/saantil/archive/2013/03/31/distributed-cache-in-sharepoint-2013-quot-unexpected-exception-in-feedcacheservice-isrepopulationneeded-cache-cluster-is-down-restart-the-cache-cluster-and-retry-quot.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Some error in cluster alertlog but the cluster and database is normal used.

hi.everybody
i used RAC+ASM,RAC have two nodes and ASM have 3 group(+DATA,+CRS,+FRA),database is 11gR2,ASM used ASMlib,not raw.
When i start cluster or auto start after reboot the OS,in the cluster alertlog have some error as follow:
ERROR: failed to establish dependency between database rac and diskgroup resource ora.DATA.dg
[ohasd(7964)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
I do not know what cause these error but the cluster and database can start normal and use normal.
I do not know whether these errors will affect the service.
thanks everybody！

anyon has the same question?

Use DISM to add drivers returns an error on an image which has profiles and programdata on a seperate volume

Hi,
We capture and modify W7 Ent and Pro OS images on a regular base by using DISM to add drivers for example. Until now we never had a problem because we always had images which only had 1 OS volume captured. DISM works fine to mount the image to a mount
folder, add drivers, and save the changes in the image.
However now we encounter an issue when doing the same actions on an image where the \Windows folder was located on the C:\ volume and \programdata and \users folders where redirected to a D:\ volume.
When mounting the C:\ volume image (including everything except \programdata and \users folders) the error we receive when trying to add or get drivers is:
Error 3 - the \Windows folder is not a valid Windows directory.
The DISM.Log file show right before this error that the remote registry could not be contacted.
This is caused I think because the registry files are located on the \Users folder, but since this folder is not captured in the image (located on another volume during capture) it cannot find the registry.
My question is: how can we resolve this?
What we have now is 1 WIM file where index1 is the OS (C:\ volume) and index2 is the \ProgramData and \Users folders (D:\ volume). Probably the way of capturing the image and redirecting programdata/users is not done in a correct way...
Note: the image index1 and index2 restore works fine - the unattended.xml contains also redirection to the folders paths for \programdata and \users...
Any help or advice would greatly be appreciated!
Thx.
Steve
Wkr, Steve

Hi Steve,
You can be right that DISM don’t support the scenario that User profile and System are in the separated volumes.
As a workaround, we should use the defaults to put the profile on C: during capture image, and then set the profile path to be on the D: drive after the image deploying.
Please refer to below KB for how to using Sysprep to redirect profiles’ locations.
Customize the default local user profile when preparing an image of Windows
http://support.microsoft.com/kb/973289/en-hk
Hope these could be helpful.
Kate Li
TechNet Community Support

Error of ADD ON and Query Saving

Hi
Even after uploading the licence i am not able to register ADD ON as well as i cant save query.
When i register ADD ON i receive error : wrong digital signature for addon installer
When i save query i receive error:define numbering series in administration module
Though i have allot licence to SAP ADD ONs and superuser.PL is 0.
Whats the solution?

hi,
you only need to remove the traces from the sari table if u r getting this error on server also.for client system go to the drive in which sap is installed...open prog file..sap b1...then u will find 2 addon local registration file and a folder called addon..remove ur addon from that folder and in the file search for the string where ur addon was installed and remove it......dont try it if u r nt comfortable.......
much easier way is to format the client system and then installing the addon again.......
Thanks
Abhishek

I set up the the sync add on and had no errors.When I sync now I get"Sync encountered an error while syncing:Firefox sync server maintenance is underway..."I have gotten this mesaage for the last 10 hours.Should I wait or is there an issue with my setup?

I just loaded Firefox onto my laptop. I set up the the sync add on and had no errors. When I hit sync now I get "Sync encountered an error while syncing: Firefox sync server maintenance is underway, syncing will resume automatically." I have gotten this message for the last 10 hours. Should I wait or is there an issue with my setup? I checked the Mozilla sync server status and it listed no issues.

There was a server out last week. see below. now everything works great. thanks for the follow up.
To:
Subject: [Bug 744289] sync107.db.scl3 down
Do not reply to this email. You can add comments to this bug at
https://bugzilla.mozilla.org/show_bug.cgi?id=744289
Gregory Szorc [:gps] <[email protected]> changed:
          What    |Removed                     |Added
            Status|UNCONFIRMED                 |RESOLVED
        Resolution|                            |FIXED
           Summary|error in sync               |sync107.db.scl3 down
     Last Resolved|                            |2012-04-10 19:39:11
--- Comment #2 from Gregory Szorc [:gps] <[email protected]> 2012-04-10
19:39:11 PDT --- Well, this is embarrassing. It looks like one of our
servers was down and for whatever reason we didn't notice.
It should be working now. If you still see errors, please reopen this bug.
Configure bugmail: https://bugzilla.mozilla.org/userprefs.cgi?tab=email
------- You are receiving this mail because: ------- You reported the bug.

HT2409 I'm getting "can't add volume. Unknown error occured" when I try and add my Mac hard drive to the privacy settings

I'm getting "can't add volume. Unknown error occured" when I try and add my Mac hard drive to the privacy settings

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Cluster Transport Adapter Error - Sun Cluster

I am installing sun cluster 3.0 and it gives me an error saying:
failed to add cluster transport adapter - unknown adapter of transport type, trtype=dlpi...
My network card is syskonnect - interface is skge0.....
What is wrong....Thanks

Hi,
I have a similar problem .
Get the same error with Sun Cluster 3.0 the card is Phobos quad port.
Could find a solution to it or had to shell out a few hundred bucks for sun cards ?

IMAQ AVI Read Frame Trigger Error

I have an application that is creating avi clips of a process. This application is writing frame data which is read later in another application. It is at this point, during the reading of the data that an Error -1074396037 Trigger error is occuring. I am using IMAQ Vision 7.0 and Labview 7.0. Attached is an avi that was created. It consists of a total of 75 frames. Also attached is a simplified version of the frame read part of my application. When reading the frame data I get the error at frames 36 and 51.
I was hoping somebody could have a look and see why I am getting the error.
Terry Sopkow
Sr. Reseach Technologist
Oilphase-DBR
Attachments:
ReadFrame.zip ‏596 KB

Hi Terry,
I ran your program with your video and got error 1074395975 DirectX has timed out reading the avi file. I do not think there is anything wrong with your program because I ran your program with a different avi file and it worked perfectly. I also ran the shipping example Read AVI Example.vi with your video and got the same timeout error.
So there must be something wrong with your avi file. Perhaps frames 36 and 51 are missing or corrupt for some reason. Try creating the avi file again and see if you still have the same problem. If you do, then we'll have to investigate the problem with the creation of the file.
Christopher W.
Application Engineer
National Instruments

Mutating Trigger error while updating table

Hi Guys,
I am updating one table and after trigger also fire at the same time. Now, I want to avoid mutating trigger error. Can any one help me on this.
Thanks in advance!
Regards,
-LRK

You'll have to read these articles first, they explain what's the problem and how to deal with it:
http://www.oracle-base.com/articles/9i/MutatingTableExceptions.php
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551198119097816936
but, as Saubhik already said, using Oracle's AUDIT functionality would be the way to go.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_4007.htm
Using an autonomous transaction can result in corrupted data or unexpected errors, stay away from them if you want to use them in order to bypass/hide your mutating table error.

HP LaserJet Pro M1536dnf Multifunction Printer (unable to add print driver hpfax1, error code 87)

Hi, my printer HP LaserJet Pro M1536dnf Mfp, suddenly didnt work so i remove the printer, and downloaded a new driver http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3974271/model/3974278#Z7_3054ICK0KGTE30AQO5O3KA30R1 once dowloaded, i run it and uninstall the printer, restart my pc, and proceed to installing. but in the process of installing a error occurr, saying that "Unable to add printer, error code 87", and that " HP Toolbox FX has encountered an error and can not recover. once i click ok. it tells me to restart my pc and reinstall it again. i did it for 8x, and still with the same error. please help really need a help right now. as my boss is going to kill me

Hey , Welcome to the HP Support Forums!
I understand that you're getting the error 'Unable to add print driver hpfax1, error code 87' when installing your HP LaserJet Pro M1536dnf Multifunction Printer on your Windows 7 computer. I would like to assist you today with resolving this install issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. At this time I am going to walk you through some additional software and driver troubleshooting steps. Please follow all of the steps below. If you're using your HP Laserjet through a USB Cable connection, please disconnect that cable now. Step one: Remove Driver: 1. Click on your Start menu 2. Select Control Panel 3. Select Programs and Features 4. When Programs and Features opens a list of programs installed on your computer will populate. Click on the 'Installed ON' tab at the top to change the date so the recently installed items show at the top. This will make it easier to manually locate the three HP Laserjet items you need to uninstall. 5. Next, look for the HP LJ M1530 MFP Series HP Scan, HPLaserJetHelp_LearnCenter, and HP LaserJet Professional M1530 MFP Series. If you see any 3 of these, or all 3 of these items, please click on them and select Uninstall. Once you have confirmed that those three items have been uninstalled, please close Programs and Features and proceed to the next step. Step 2: Clear Temp Files: Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step. Step 3: Download Installer Package: Please click here to download the Full Feature Installer package. Once the download is complete, click on the download to allow it to 'Run'An extraction should now automatically occur. Once the extraction is complete an installer window will open. Please close the installation window. You do not want to run the installation at this time. Step 4: Run Scrubber: To ensure that no trace of the HP Software and Driver package remain on your computer, I am going to have you run a Scrubber built into the installer package for your printer. Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. This is the HP Laserjet Installer Click on the Utilities folder under the 7z folderDouble left click on Scrubber. It is an application which should launch the HP Uninstaller. Please follow the onscreen prompts to complete the uninstaller. Once the uninstall has completed please proceed to the next step. Be sure to Restart your computer if the uninstall process prompts you to. Step 5: Check Print Server Properties: Click on your Start menuClick on Devices and PrintersIn the Devices and Printers window look for your HP Laserjet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Laserjet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step. Step 6: Run Disk Cleanup Utility: Click on your Start menuSelect All ProgramsSelect AccessoriesSelect System ToolsSelect Disk Cleanup Run a Disk Cleanup on the C DriveWhen prompted, check Downloaded Program files, Temporary Internet Files, Recycle Bin, Temporary Files, and Thumbnails Once the Disk Cleanup is complete, please proceed to the next step. Step 7: Run CCLeaner: To ensure that there are no malicious files on your computer or Registry conflicts on your computer I am going to have you run a CCLeaner before we install your printer. Please click here to download the CCLeaner Tool. Once the website opens select the link at the top for 'Free Download'. Once the download is complete please complete the Scan. Should multiple malicious files be found you may need to run the Scan multiple times to remove all malicious files. Once your system comes back as clean, please proceed to the last step. Step 8: Install Device: Please click here to download the Full Feature Installer package for your HP LaserjetOnce the download is complete please allow the download to RunPlease follow the onscreen prompts to install your HP LaserjetIf using a USB Cable connection please do not plug in the USB Cable until the installer window prompts you to Once the installation has completed successfully please test your machine to confirm that everything is functioning properly. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

Adobe reader (11.3.2) PDF's on ipad and getting error that the file is corrupt!!

i have the latest Adobe reader from the app store (11.3.2) however i am struggling to open PDF's on ipad and getting error that the file is corrupt!!
any help or suggestions welcome

Would you describe how you transferred the PDF file to your iPad and iPhone? Did you send it as an email attachment and open it on your iPad and iPhone?
The file may have been corrupted by Apple Mail, which is a known problem. Please see Problem #1 in the FAQ document How to avoid known PDF email attachment problems.
Would you try some experiments so that we can troubleshoot the problem? During the experiments, please use cloud storage (e.g. Acrobat.com, Dropbox, Google Drive, etc.) and avoid sending the PDF file as an email attachment.
Rename the corrupted/damaged PDF file on your iPad. For example, add "_damaged.pdf" to the file name.
Upload the corrupted/damaged PDF file to the cloud storage of your choice.
Download the corrupted/damaged PDF file from the cloud storage to your Windows or Mac desktop computer.
Open it in the desktop version of Adobe Reader XI for Windows or Mac.
Does Adobe Reader XI on your desktop computer display an error message?
Upload the (good) PDF file on your iPhone to the cloud storage.
Download the (good) PDF file from the cloud storage to your iPad.
Open it in Adobe Reader on your iPad.
Does Adobe Reader on your iPad display an error message?
We can investigate further based on what you will find.
Thank you for your help.

Have upgraded to 6.0.2 on my MacBook and get error message "Server Not Found" everytime i use Firefox; however, if i then click on my Gmail or other sites from bookmark toolbar it connects. means an extra step and that never happened before

when i first click on Firefox the URL: www.27yhbnhy6tfgvrbcfre3.com shows up and the error message "Server not Found". but i can connect to any website by just clicking on a bookmark from the toolbar (or typing in a url). this never happened with previous versions of Firefox

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Vendor code 12154 and 1005 error

Hi,
I have developed an application which users the RDC API set (CR XI R2 SP4.5 version) to preview crystal reports. All types of reports works fine but except one. This report is a blank report with one sub-report. I have used native oracle connection to connect to the Oracle database when creating this layout. The main report is blank but it has a sub report with one view. When I run the report from Crystal Report Designer it works fine, but when I run it through my application it give the following error. Other report with sub-reports where the main report also has views works fine. Itu2019s just that reports with sub-reports where there are no views in the main report gives this error. I have debugged the code and found that it gives this error when Iu2019m setting the table location of the view in the sub-report. Hope you can help me to solve this issue.
I get two errors and they are,
Fail to open the connection. Database Vendor Code 12154
Fail to open the connection. Database Vendor Code 1005
Thanks in advance,
Chanaka

Hi Ludek,
Thank you for replying to my question. Here are the information you requested for.
Q: Also, please confirm that this is happening on the same computer where you designed the report?
A: I get the same errors when I run my application and try to view the reports from the same machine where I have installed Crystal Report Designer and created the reports from.
Q: And, if you take out the subreport and run it on it's own as a main report, can you log on to it in code?
A: If I take the sub-report and run it on itu2019s own it works fine from my code
Normally when I create reports with sub-reports I donu2019t browse and import and existing sub-report but I create a sub-report with the Report Wizard. All sub-reports are not on demand sub-reports as well.
Also, as I said before, other reports work fine. That is, reports without sub-reports which has views in the main report, reports without sub-reports where there are no views in the main report as well (blank report), reports with sub-reports where there are views in the main and sub-reports both. Also, for all these combinations I have checked with and without parameters in the main and sub-reports. The errors are only shown when the main report is blank (no views added) and has a sub-reports with views.
Q: Also, open the report in the CR designer, got to the subreport. Then to the Database menu and expand the properties icon. What does it say at Database type?
A: Selecting the sub-report and going the Database\Set Database Location and by clicking on the Properties dropdown (the + sign) I can see that the Database Type is Oracle Server which is correct as we always use the Native Oracle connection to connect to the database at design-time and at runtime when previewing the report from the application.
Q: Please provide the code you are using to log on to the database
A: Code is given below.
Further investigating in to the issue I saw that if the sub-report has parameters I get the error u201CFail to open the connection. Details: [Database Vendor Code: 12154]u201D. If the sub-reports doesnu2019t have parameters then I get the error u201CLogon failed. Details: [Database Vendor Code: 1005]u201D. Debugging in to the code from VB I see that itu2019s throwing the error when I try to set the table location for a view in the sub-report. Here the error number is -2147189176 and the error description is Logon failed. My guess is that both the errors are linked to this location setting and the main report not having views or database connection.
Regards,
Chanaka
In Main section
For tableCountInMainReport= 1 To crxReport.database.Tables.count
RDCSetNthTableLogOnInfo(u2026u2026u2026.)
RDCSetNthTableLocation(u2026u2026u2026u2026u2026..)
Next tableCountInMainReport
For each section in report
   If sub-report exist
       RDCSetNTableLogonAndLocSubReport(u2026u2026u2026u2026u2026)
   End if
Next section
Methods called from the main method
Public Function RDCSetNthTableLogOnInfo(ByVal tableIndex As Integer, ByVal server As String, ByVal database As String, ByVal userName As String, ByVal password As String) As String
   On Error GoTo ErrorHandler
   crxReport.database.Tables(tableIndex).ConnectionProperties.Item("Server") = server
   crxReport.database.Tables(tableIndex).ConnectionProperties.Item("User ID") = userName
   crxReport.database.Tables(tableIndex).ConnectionProperties.Item("Password") = password
   If (database <> Null) Or (database <> "") Then
      crxReport.database.Tables(tableIndex).ConnectionProperties.Add "Database", database
      RDCSetNthTableLogOnInfo = "True"
   End If
   RDCSetNthTableLogOnInfo = "True"
ErrorHandler:
   If Err.Number <> 0 Then
      MsgBox "Error in setting table logon information for " & crxReport.database.Tables(tableIndex).Name & "." & "Error number : " & Err.Number & " Error description : " & Err.Description, vbOKOnly, "Error"
      RDCSetNthTableLogOnInfo = "CR_ERROR"
   End If
End Function
Public Function RDCSetNthTableLocation(ByVal tableIndex As Integer, ByVal location As String) As String
   On Error GoTo ErrorHandler
   crxReport.database.Tables(tableIndex).location = location + "." + crxReport.database.Tables(tableIndex).location
   RDCSetNthTableLocation = "True"
ErrorHandler:
   If Err.Number <> 0 Then
      MsgBox "Error in setting the table location. Error number : " & Err.Number & " Error description : " & Err.Description, vbOKOnly, "Error"
      RDCSetNthTableLocation = "CR_ERROR"
   End If
End Function
Public Function RDCSetNTableLogonAndLocSubReport(ByVal setionCode As String, ByVal subreport As Integer, ByVal servers As String, ByVal databases As String, ByVal userNames As String, ByVal passwords As String, ByVal locations As String) As String
   Dim oSubreportObject As CRAXDRT.SubreportObject
   Dim locRet As String
   Dim sServers() As String
   Dim sDatabases() As String
   Dim sUsers() As String
   Dim sPasswords() As String
   Dim sLocations() As String
   Dim i As Integer
   On Error GoTo ErrorHandler
   If crxReport.Sections(setionCode).ReportObjects(subreport).Kind = crSubreportObject Then
      Set oSubreportObject = crxReport.Sections(setionCode).ReportObjects(subreport)
      Set oSubreport = oSubreportObject.OpenSubreport
      sServers = Split(servers, Chr$(31))
      sDatabases = Split(databases, Chr$(31))
      sUsers = Split(userNames, Chr$(31))
      sPasswords = Split(passwords, Chr$(31))
      sLocations = Split(locations, Chr$(31))
      If (oSubreport.database.Tables.count = UBound(sServers)) And _
         (oSubreport.database.Tables.count = UBound(sDatabases)) And _
         (oSubreport.database.Tables.count = UBound(sUsers)) And _
         (oSubreport.database.Tables.count = UBound(sPasswords)) And _
         (oSubreport.database.Tables.count = UBound(sLocations)) Then
         For i = 1 To oSubreport.database.Tables.count
            oSubreport.database.Tables(i).ConnectionProperties.Item("Server") = sServers(i)
            oSubreport.database.Tables(i).ConnectionProperties.Item("User ID") = sUsers(i)
            oSubreport.database.Tables(i).ConnectionProperties.Item("Password") = sPasswords(i)
            If (sDatabases(i) <> Null) Or (sDatabases(i) <> "") Then
               oSubreport.database.Tables(i).ConnectionProperties.Add "Database", sDatabases(i)
            End If
            locRet = ""
            locRet = RDCSetNthTableLocationSubReport(setionCode, subreport, i, sLocations(i))
            If (locRet <> "True") Then
               RDCSetNTableLogonAndLocSubReport = locRet
            End If
         Next i
         RDCSetNTableLogonAndLocSubReport = "True"
      Else
         RDCSetNTableLogonAndLocSubReport = "CR_ERROR"
      End If
   End If
ErrorHandler:
   If Err.Number <> 0 Then
      MsgBox "Error in setting logon information for " & oSubreport.database.Tables(i).Name & "in subreport." & "Error number : " & Err.Number & " Error description : " & Err.Description, vbOKOnly, "Error"
      RDCSetNTableLogonAndLocSubReport = "CR_ERROR"
   End If
End Function
Public Function RDCSetNthTableLocationSubReport(ByVal setionCode As String, ByVal subreport As Integer, ByVal tableIndex, ByVal location) As String
   Dim oSubreportObject As CRAXDRT.SubreportObject
   On Error GoTo ErrorHandler
   If crxReport.Sections(setionCode).ReportObjects(subreport).Kind = crSubreportObject Then
      Set oSubreportObject = crxReport.Sections(setionCode).ReportObjects(subreport)
      oSubreportObject.OpenSubreport.database.Tables(tableIndex).SetTableLocation location + "." + oSubreportObject.OpenSubreport.database.Tables(tableIndex).location, oSubreportObject.OpenSubreport.database.Tables(tableIndex).Name, ""
      RDCSetNthTableLocationSubReport = "True"
   Else
      RDCSetNthTableLocationSubReport = "CR_ERROR"
   End If
ErrorHandler:
   If Err.Number <> 0 Then
      MsgBox "Error in setting the table location in subreport. Error number : " & Err.Number & " Error description : " & Err.Description, vbOKOnly, "Error"
      RDCSetNthTableLocationSubReport = "CR_ERROR"
   End If
End Function

Check for duplicate invoices and trigger a workflow

Hello All,
I have a requirement to check for duplicate invoices in AP(Accounts payable) and trigger a workflow when duplicate invoices are found. I a not sure how to do any of the above. Please let me know if you have any information on:
1) Checking for duplicate invoices in AP
2) Trigger a workflow
Are there any standard workflows that checks duplicate invoices?
Thanks.
--Mithun

Hi MD,
I doubt if system gives an error on FI side when a duplicate invoice is posted.
I feel you would require a BAdi for it, where you can call your WF using FM SAP_WAPI_START_WORKFLOW.
Hope it helps.
Aditya
P.S also ask your Func Consultants, if there are any settings in the Customization, where you could capture Inv Dt, Inv Amt, Vendor, Company code.
Edited by: Aditya Varrier on Oct 15, 2008 9:38 AM

IPCCX jtapi, add cluster and trigger error

Similar Messages

Maybe you are looking for