IPCCx License Real Time Counter/Log?

Does anyone know if there is a way to see how many IPCCx enhanced licenses out of the pool are being used at any one time? Can it be reported on?
Cheers,
Rich

Hi
Version 8 - no idea
Pre Version 8 - you can run 'showlicenseusage.exe' from the cmd window on the server (it's in program files\cisco\desktop\bin) to see how many seats are in use and by whom.
It's not logged to the DB unfortunately, so no reporting as such.
Regards
Aaron
Please rate helpful posts..

Similar Messages

Real Time Counter

Hi all,
I have a problem regarding Real time counter. I have a field in the output structure that have unique values. The name of the field is unique document name.
For example I sent a message today with a unique doc name of test-00001. How can I send another message so that its unique doc name would be test-00002? The message could be sent anytime (right after test-00001 or tomorrow).
I understand that we can set counters for messages that are passed from 1 source. What if there are multiple sources?
Regards,
IX

HI,
Just red these comments from the same blogs. See if it helps you in your case otherwise you have to go for creation of custom z-table.
Why ot just use the built in counter for the file name? In the receiver File communication channel, Processing tab,
set the file construction mode to Add Counter, and then set the counter parameters accordingly.
This is a standard feature and requires no workaround...
Why not use the built-in counter?
2009-10-06 06:17:01 Shabarish Vijayakumar Business Card
the limitations of that would be my point 5;
5. Counter option in the adapter - Only helps if you are using the NFS protocol
and also only if the counter is needed at the end of the file name (before the file name extension)
Regards,
Sarvesh

SIT Real-time data logging and passing data

Hello all,
I am pretty new to LabView real-time, so I just want to confirm a few things. I am also using the Simulation Interface Toolkit.
Let's take the Sinewave.vi from the SIT examples. I have modified it to use sinewave.dll, and run on PXI-8101. If my understanding is correct, when I click "Play", the entire Sinewave.vi is deloyed into PXI-8101, and therefore the entire VI is running at the same pace. The front panel I see on my desktop is slower snapshots of what is actually happening?
1) Let's pretend now that the sinewave model is time critical and must run every 10ms. How do I do that? I have noticed that within the "SIT_Indicator_Indices" loop, there is a Wait 50ms block. Is that accurate?
2) I have also added a time elapsed block that will change the Frequency and Amplitude inputs as a function of time. I made them update every 2ms. What clock are we running on? If my sinewave.mdl suddenly calculate integration (time dependent), can I use that elapsed time block as my timer to pass into the model?
3) How fast is the sinewave.vi running anyways?
4) Let's say I want a log of the sinewave output (a data point every 10ms). I don't need the log in real-time, I just want to do some analysis on it later. How do I do it?
Thanks.
Attachments:
Sine Wave.vi ‏104 KB

Hi Bladhart,
When running the in the Development Environment (pressing the run button on the Real-Time vi) there will be an extra thread to handle the front panel you see. This thread will be handled just like any other thread in Real-Time and will take processor time, thus slowing down your entire application to a certain extent.
1. You would need to make sure everthing inside the loop can execute within 10ms and change the wait time to 10ms. Or you can use a timed loop set to run every 10ms and get rid of the wait time but again you would need to ensure everything in the loop can execute in under 10ms.
2. The elapsed time should be running off the Real-Time system clock.
3. The time that the Sinewave.vi is running is system dependent, there is no set speed.
4. You can log the data by saving to a *.tdms file. You can then use the data from the *.tdms file to do processing later.
<Brian A | Applications Engineering | National Instruments>

Standby DB real time redo log apply problem

Hi all,
I am using Oracle 10g to create physical standby db. In the standby
db, normal archived log apply does not have problem, but when I try to
use redo log real time apply and issue command
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE;
it shows:
ERROR at line 1:
ORA-38500: USING CURRENT LOGFILE option not available without stand
What is the problem??
Thanks a lot !
Steven

Note:3633226.8 from Metalink states:
Setting a standby's RealTimeApply property to ON when there are no standby
redo logs on the standby or the standby is not in SYNC transport, will
seemingly succeed. However, the apply engine will not start. The DRC log
will report an error like ORA-38500. In this case, add standby redo logs
and set the log transport mode for the standby to be SYNC and set the
standby state to ONLINE.
Workaround:
Add Standby Redo Logs on the standby and set the following broker properties
on the standby:
LogXptMode to SYNC and reset RealTimeApply to ON.
Then set the standby state to ONLINE.
HTH

Did they change the inventory system to have it show real time counts now?

I ask because before it used to be that it took a store having THREE or more copies of a game or other item before they would show up as available via the website. Of course, if you looked something up using the kiosks IN store it would show most times even if it was less than three.
I just ask because I bought a copy of Deadpool for the PS3 on Sunday and it showed as IN stock even though they only seemed to have ONE copy. By the time I got home and double checked it showed '3-5 days' for in store pickup for that same game.
Just kind of curious since if they did improve the system this is a GREAT thing.

Hi CheapestGamer,
Great question about our inventory system! I always check and make sure the item I want is available before I go into the store so I don’t leave disappointed I didn’t get what that I wanted because it was sold out.
I know that we are continuously striving to improve our systems and make them better, faster, stronger. Just recently in fact, we rolled out a new register system to the stores full of numerous improvements and upgrades. With that said, I too have noticed the system updating more quickly, and have seen exactly what you described in your post.
Thanks for noticing our hard work, hopefully we can continue to impress!

Real Time Application Clusters in Oracle 9i

want to know what exactly the Real Application Clusters In oracle9i

Hello again;
Real time apply is a new feature introduced in Oracle database 10g.
Without real time apply, log apply services wait for the full archived redo log to arrive before applying to the standby database.
If a standby redo log is used real time apply can be enabled allowin Data Guard to recover redo data from the current standby redo log as it is being filled by the RFS process.
Best Regards
mseberg

Error while running Real Time Job through SOAP UI

Hi Experts,
I am using real time job for search the duplicates in the data base using attribute values. After running the job iam getting correct result in the xml message.
I configured real time job in management console and taking the WSDL and giving the in put in SOAP UI then iam getting the message like this after 2 timedouts.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Sender</faultcode>
<faultstring>Web Services is unable to process the request to call real-time service 'RT_SEARCH' using Access Server 'uplt-abk-052:4000'. Error: Server sent back error: Communication Error. See real time job log for details.</faultstring>
<faultactor/>
<detail/>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
In the real time job log file iam getting the message like this
(12.2) 06-01-10 09:37:41 (E) (0620:2732) Unknown: SP(RT_SEARCH, UPLT-ABK-052:3501)::flowThread() Flow became invalid while waiting for reply from real time job. (BODI-300136)

In Management Console,
PLease take a look at websevices-> partciular JOB-> historyLog-> errorlog and tracelog to see the more details of the error. It should definetly whats the cause of the error.
-Subhadra

How to count occurences of a certain string in incoming real-time data? Also displaying RTC data. Current VI included

I use LabView student Express 7 on a Windows XP system.
Time-frame: we are doing final integrations for our balloon experiment today. We just got told that the press wants to view real-time data, which we haven't programmed for. I need help to get a working VI at the latest by 25.02.2004 before 0800(morning) (GMT+1).
Note on license
It is a student balloon flight, and the data will not be used in scientific work, so the I am not breaking any license agreements (I hope).
Problem synopsis:
The balloon continually transmits data at 9600baud. The data is a semi-repeating header followed by a constant lenght data-package arranged like this:
BEXUS[h][m][s]BEXUS[h][m][s]
[Raw binary data, 7channels*8sub-channels*8bits]
What the groundstation is doing right now:
Take all incomming data and save (append) the data to a file without any data-handling. (We figured we would go post-processing).
What I need to change in less than 24 hours:
- Add a "package" counter
- Add a display of the clock data (RTC)
How I planned to implement the changes:
-RTC display:
The RTC data is in BCD format, since that means that if you look at the data as hex numbers, you get the hours and minutes and seconds out in "clear text". That is 12 hours is 0x12hex. I figured that I can do a match pattern BEXUS and pass the "after substring" to another match pattern BEXUS from which I feed the "before substring" to a type-cast VI (casting string to u8) and displaying that, which should give me a display of "123000" for the time 12:30:00... I couldn't get it to work at all when I tried out the supplied "beta" vi.
- Package counter:
Counting how many BEXUS that gets detected and dividing by 2. I don't know how to do this. I've looked on the forum (a good thread on the problem: "how do I count the number of *'s in a string") but these use either loops or arrays... and I'm not sure how this works when I'm getting the data in at realtime. I cant make an array and then count it, since then the array would grow fast and possibly interfere with saving of the data??? Saving the data is critical.. without that file we cant do post-processing.
Since my time is so limited (I'm not even supposed to do the groundstation software but they called on me in the last minute because no-one else had time/wanted too/could do it) I hope that you could make an exception and provide me with working VI's (based on the one I have attached) so that I can show something to the press! (Free comercial for NI!! Since the student version shows the National Instruments water-mark on all VI's!!! Possible TV time!!)
Thanks!
PS: even if you are to late (after 25) post anyway!
Why:
-I can learn from it
-the launch might be delayed due to weather conditions
-others might find it amusing!
Thanks again!
Attachments:
BexusII_groundstation.vi ‏46 KB

I have a valid example data file attached to this thread.
If you open BEXTEST.bin in a hex-editor of your choice, you'll see the BEXUS as 42 45 58 55 53 and then the time as 00 28 09 etc.
I couldn't get Joe Guo's VI to work. It doesn't count packages correctly, and the time is not displayed correctly either.
The file was saved using a straight save to file VI.
The data is from actual launching area tests performed a few mintues ago. The time displayed is "On time" e.g. how long the gondola has been powered up.
I have a spare T-junction, so I can hook into the balloon real-time data as we fly, in case anyone care to see if they can figure out why the latest version of Joe Guo's program is not displaying correctly.
I will monitor this
thread during and after flight to see if anyone can make it in time!
Thanks for the great effort!!
Attachments:
bextest.bin ‏53 KB

How to get real time information about how many user are logged in and thei

I use tomcat as my server platform in Ubuntu for a war file.
I know in order to get real time information about how many user are logged in, we can count how many active sessions exist by a SessionCounter code. However, I have to permit HttpSessionListener in web.xml of tomcat. From other users' experiences, the configuration is complexed and has some errors.
Here's the link:http://www.stardeveloper.com/article...1112001&page=1
In order to get users' ip, in jsp, use request.getremotehost() or
request.getremoteaddress() by editing the jsp file.
I wonder if there's some open source software to use for these two purposes.
Thank you!

That url is missing a few bits. The ... in the middle doesn't help.
we can count how many active sessions exist by a SessionCounter code.
However, I have to permit HttpSessionListener in web.xml of tomcat.
From other users' experiences, the configuration is complexed and has some errors.And have you tried it? The configuration isn't that complex.
What errors do you mean? Errors in tracking people, variance in the count? Probably related to internet issues and nothing you can do will alleviate them.

How can I extract the data from a Real-time Execution Trace ".log" file?

I would like to get the data for the traces from the Real-time Execution Trace toolkit ".log" file to read in Excel and generate a report.

Hi Chuck,
Have you tried reading it into a text or binary file first and then generating a report using the Report Generation VIs?
Ipshita C.
National Instruments
Applications Engineer

Real time logging: best practices and questions ?

I've 4 couples of DS 5.2p6 in MMR mode on Windows 2003.
Each server is configured with the default setting of "nsslapd-accesslog-logbuffering" enabled, and the log files are stored on a local file system, then later centrally archived thanks to a log sender daemon.
I've now a requirement from a monitoring tool (used to establish correlations/links/events between applications) to provide the directory
server access logs in real time.
At a first glance, each directory generates about 1,1 Mb of access log per second.
1)
I'd like to know if there're known best practices / experiences in such a case.
2)
Also, should I upgrade my DS servers to benefit from any log management related feature ? Should I think about using an external disk
sub-sytem (SAN, NAS ....) ?
3)
In DS 5.2, what's the default access logbuffering policy : is there a maximum buffer size and/or time limit before flushing to disk ? Is it configurable ?

Usually log-buffering should be enabled. I don't know of any customers who turn it off. Even if you do, I guess it should be after careful evaluation in your environment. AFAIK, there is no configurable limit for buffer size or time limit before it is committed to disk
Regarding faster disks, I had the bright idea that you could creating a ramdisk and set the logs to go there instead of disk. Let's say the ramdisk is 2gb max in size and you receive about 1MB/sec in writes. Say max-log-size is 30MB. You can schedule a job to run every minute that copies over the newly rotated file(s) from ramdisk to your filesystem and then send it over to logs HQ. If the server does crash, you'll lose upto a minute of logs. Of course, the data disappears after reboot, so you'll need to manage that as well. Sounds like fun to try but may not be practical.
Ramdisk on windows
[http://msdn.microsoft.com/en-us/library/dd163312.aspx]
Ramdisk on solaris
[http://wikis.sun.com/display/BigAdmin/Talking+about+RAM+disks+in+the+Solaris+OS]
[http://docs.sun.com/app/docs/doc/816-5166/ramdiskadm-1m?a=view]
I should ask, how realtime should this log correlation be?
Edited by: etst123 on Jul 23, 2009 1:04 PM

Data guard real time apply vs archived log apply on physical standby

Dear DBA's,
last week i configuared DR , now the phyiscal stanby database is archive apply mode,
i want to confirm is it better to apply the archived log or should i cahnge it to real time apply .
give me sugesstions.
Thanks and Regards
Raja...

One question are you using ARCH transport to move the redo? or have you configured standby redo logs and logwr transport (either async or syncronous), if you are using the archiver to transport the logs then you can not use real time apply.
If you are using log writer to transpor the redo the realtime apply reduces the recovery time required if you need to failover as trher should be less redo to apply to bring the standby up to date, which mode you use to transport redo will depend on what is acceptable in terms of data loss and the impact on performance.

Real - Time Apply some times uses Archived log file

Hi All,
I have a doubt on real time apply in Oracle 10g 10.2.0.4 version where arch process has been configured on primary database and standby has been configured for maximum performance mode with real time apply.
But in standby alert log file i use to find below message rarely
Media Recovery Log /oraclearch/oraarch/ctdr/5548.dbf
Media Recovery Log /oraclearch/oraarch/ctdr/5549.dbfSo my doubt is why archived files are applied as standby has been configured for real time apply where it should apply only from standby online redo log files.
Also i dont find any information on standby database in the view v$standby_log that these standby online log files have been archived in archived column, so how to find how much of data has been written by rfs process on SRL's...
-Yasser

hi,
As the remote file server (RFS) process writes the redo data to standby redo log files on the standby database, log apply services can recover redo from standby redo log files as they are being filled.
please check http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/log_apply.htm
thanks,
baskar.l

Why can't read access log file in real-time? (Oracle Weblogic Server 10.3)

We can't read access log file in real-time. If access log is rotation to new file so can read access log file but can't read real-time.
*** Oracle Weblogic Server versions 10 R3

what's your meaning? try this command "tail -f access.log".
Threre is a buffer about 8K for WebLogic to write the access info into the log files, so you can't see the access info untill the buffer is full.

Semantic Logging - RollingFlatFileSink - Real-Time Logging

We're currently using semantic logging and are able to both save to rolling flat files and a sql database.
A difference we're seeing is that the sql sink inserts every x seconds while the rolling flat file sink doesn't insert data until the file rolls over or the service stops.
Is there a way to have inserts happen in real-time for the rollingFlatFileSink?

Please post questions related to this product in their
forums at CodePlex.

IPCCx License Real Time Counter/Log?

Similar Messages

Maybe you are looking for