IPConfig shows multiple IPs, NIC config does not?

I'm not having a problem, but I am curious as to what is going on with my situation.
I have 4 servers (Win Server 2008 R2 SP1) with two NICs. The servers are in 2 Oracle RAC clusters, NOT Windows clusters. What I've noticed is, if I do an IPCONFIG /ALL at the command line, it shows two IPv4 addresses for one NIC, and one IPv4
for the second NIC. So far, so good.
However, if I pull up the NIC properties in the GUI, and look at the IPv4 settings (in the Advanced section,) it only shows one IP.
I'm really just curious as to why this is. I'm presuming that whoever set up these servers (said person was gone when I started, and left no documentation...) set the 2nd IP using netsh most likely. But I would still expect both IPs to show in
the GUI.
Thanks,
Jason A.
Jason A.

Sorry, I should've been more clear in my description.
If I go to Control Panel -> Network Connections -> Right-click on one of the NICs -> Properties -> Highlight IPv4 -> Properties -> Advanced, the "IP Settings, IP Addresses" box only shows a single IP / Subnet listed.
If I drop to a command prompt and do "IPCONFIG /ALL," then the same NIC lists two IPs, two subnets.
ex: 192.168.1.xxx / 255.255.255.0 and 192.168.2.xxx / 255.255.255.0
Those are *NOT* the actual IPs, but examples (I'm not at work.)
There are two NICs shown in Network Connections, the second one only shows one IP in either of the situations above, and said IP is *NOT* the 2nd IP shown by the first.
Vivian: It's not a DNS issue. While I have no access to the DNS servers themselves, doing an NSLOOKUP on the servers names shows both the IPs listed for the NIC I'm curious about.
As I said, nothing is *broken* this is just me being curious as to how this was set.
Thanks,
Jason
Jason A.

Similar Messages

How do I enable Javascript in Foxfire 29.0? about:config does not work.

I've just downloaded the newest available Foxfire (29.0) in the hope I can access my gmail account. But it still says "Javascript is not enabled". about:config does NOT show a preferences menu, so I can't toggle Javascript on. I tried downloading add-ons to toggle Javascript on/off, but they are not compatible with Firefox 29.0.
Must I stop using Firefox altogether? I cannot access my banks, my credit cards, or my gmail accounts, nor can I access YouTube. This is all I use my browser for -- so Firefox is no longer useful to me, unless you can give me a fix for this!
Carol Stromek

This solution didn't work, because the page was redirecting and never arrived. It might have been because I was using Internet Explorer, which also is not Javascript enabled -- but the Mozilla Support Forum requires Javascript enabled in order to access it!
I used Chrome, and was able to toggle it when the about:config field ''finally'' opened. The originally posted instructions omitted the instruction that the command about:config will only work if you do it from the Firefox home screen, where the orange word 'Firefox' appears at the beginning of the destination.

HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
Sounds like a repair issue, which is not easy to do in India :(

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
Anything I haven't tried?
HELP!

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?

I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?

Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa.

My ipod shows up in itunes, but does not show up on my pc as a drive

my ipod show up in itunes - but does not show up on my pc as a drive
cannot figure out why it now doesn't show up

Maybe
iOS: Unable to import photos to computer
Did it show before?
If you connect to another PC does the iPod show up in My Computer?
Have you installed only camera or scanner programs on your computer?

In iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8

in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
Tom at the Genius Bar told me that Option Delete would work. It does not.
I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo?

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo? It use to work but it no longer lets you place a title over the opening photo.

Is your signature still current?(iPhoto '08, OS X Mountain Lion (10.8.4)) I can confirm this for iPhoto '11; Shatter will only show the text slide title between the slides. Ken Burns and Classic theme can still be set to overlay the caption and title directly over the slides.

10.9.4 Mail activity shows incoming mail downloading but does not put in mailbox

Been testing all day with no results.
The hosting company says there is no problem at there end. All mail can be found the their webMail.
iMac Mail connection doctors show all good connections.
Mail activity shows incoming mail downloading but does not put in mailbox, they simply disappear.
Still searching for a fix for this serious issue.
Any ideas or a proven solution is most welcome.
-Thanks in Advance -

Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox
and/or
Try re-indexing the mailboxes. This can take awhile if you have a lot of mail.
Reindex messages

Whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?

Hi
I have a windows 7 and whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?
I hope that was clear.
Thnx

Hello kmanthie,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
I worked on behalf of HP.

Metric shows real time value but does not show historical data

I am using OEM 12c.I am facing an issue and I don't know where to look for problem.
I had created one customized metric for percentage flash recovery area through metric extension.I deployed to it target databases.
When I check it through Database --> All Metrics it shows me real time value for metric,Collection schedule,upload interval and last upload time.IT is all fine.
When I check metric value history,
For all the columns like Last Known Value,
Collection Time stamp,
Average Value,
High Value,
Low Value
it shows no data.It even does not show anything in Metric Value History graph.
Even the metric test in Metric Extension works fine.
All the client agents are uploading the the data to OEM successfully.
Any help,guide is appreciated.

bit late but there are two options on metric creation "Alerting Only" or "Alerting and Historical Trending" - I assume you need the latter to show history so was this option used?

I just bought an iPhone 5s running iOS 7 and updated it to the recent version 7.0.5 and there is no call decline button. Sometimes it shows it sometimes is it does not... What's the problem...

I just bought an iPhone 5s running iOS 7 and updated it to the recent version 7.0.5 and there is no call decline button. Sometimes it shows it sometimes is it does not... What's the problem...

With iOS 7, the "call Decline" button is only available when the phone is awake. To decline a call when the phone is asleep, simply tap the On/Off button.

WHEN OPENING A FILE WITH FIREFOX MULTIPLE FILES KEEP OPENING IN RAPID SUCCESSION WITHOUT SHOWING ANY CONTENT AND THIS DOES NOT STOP AND I CANNOT SAY HOW MANY FILES I HAVE

THERE IS A PROBLEM IN OPENING ANY FILE. WHEN OPENING - A RAPID SUCCESSION OF FILES OPEN, ONE ATOP THE NEXT, WITHOUT SHOWING FILE'S CONTENT. THIS CONTINUES FOR QUITE A WHILE. I MUST TURN OFF COMPUTER. IT IS NOT POSSIBLE TO CHOOSE ANY OTHER FUNCTION WHILE THIS IS HAPPENING, IE : WHEN OPENING A FILE. AS IN , I CANNOT OPEN GOOGLE OR MAIL, ETC. AND THE FILES KEEP OPENING AS UNTITLED. SO I AM NOT ABLE TO OPEN ANY ONE FILE, AND SEE ITS CONTENT, THEY JUST KEEP STACKING LIKE EMTY PAGES ONE ON TOP OF THE NEXT.

THANK YOU
THAT DOES NOT SEEM TO BE THE ANSWER
I HAVE A MAC
BOUGHT IN 2008
AND I DO NOT SEE THAT I HAVE A STUCK KEY
PERHAPS I AM NOT UNDERSTANDING WHAT YOU MEAN

Show CD on CD insert does not display info

When loading a CD, iTunes does not update and show the new album info. Last album continues to display. Advanced preferences are set to "show CD"

Latest available is the simple answer
Console OES2 SP2 Oct 2009
Netware 6.5.8 with most (if not all post SP8 patches)
4.91 SP5 IR1
Seb
"Simon Flood" <[email protected]> wrote in message
news:guHDq.62$[email protected]..
> On 07/12/2011 09:45, Sebastian Cerazy wrote:
>
>> I have it on quite few IPs from DHCP that java console does not display
>> the
>> info, it just hangs there
>>
>> Most are displayed OK
>>
>> Not much of a problem, I use iManager is the console does not work, but
>> would like to know why it does it
>
> Versions please:
>
> * What version of the DNS/DHCP JavaConsole are you using?
> * On which platform?
> * If installed, what version of the Novell Client?
> * What version of OES2 are you running?
> --
> Simon
> Novell Knowledge Partner (NKP)
>
> ------------------------------------------------------------------------
> Do you work with Novell technologies at a university, college or school?
> If so, your campus could benefit from joining the Novell Technology
> Transfer Partner (TTP) program. See novell.com/ttp for more details.
> ------------------------------------------------------------------------

IPConfig shows multiple IPs, NIC config does not?

Similar Messages

Maybe you are looking for