"IPCP: timeout sending Config-Requests" while tethering on mac with bold 9900
I used to connect my mac with my Blackberry bold 9900 on Rogers network, It was working but I don't what happen but I can't no more connect and it returns this message in ppp.log file...
Serial connection established.
Using interface ppp0
Connect: ppp0 <--> /dev/cu.BlackBerry-MyPIN
CHAP authentication succeeded
IPCP: timeout sending Config-Requests
IPV6CP: timeout sending Config-Requests
Connection terminated.
Serial link disconnected.
Someone have an idea?
Marc
Unable to connect on PC version!
Similar Messages
-
Upgraded router VPN no longer working - LCP: timeout sending Config-Request
I recently upgraded my small office router from a Linksys WRT54G to a Linksys WRT610N. I duplicated all of the port forwarding configs from my previous router, but everytime I try to connect to my server I get the following error:
Could not negotiate a connection with the remote PPP server. Please verify your settings and try again.
The ports I have forwarded to my server are the following:
1701 UDP
500 UDP
1723 TCP
4500 UDP
While I am connecting I have been watching the log from Server Admin, and this is what I see:
2008-07-11 06:09:35 PDT Incoming call... Address given to client = 192.168.1.63
Fri Jul 11 06:09:35 2008 : Directory Services Authentication plugin initialized
Fri Jul 11 06:09:35 2008 : Directory Services Authorization plugin initialized
Fri Jul 11 06:09:35 2008 : PPTP incoming call in progress from '76.172.xxx.xxx'...
Fri Jul 11 06:09:35 2008 : PPTP connection established.
Fri Jul 11 06:09:35 2008 : using link 0
Fri Jul 11 06:09:35 2008 : Using interface ppp0
Fri Jul 11 06:09:35 2008 : Connect: ppp0 <--> socket[34:17]
Fri Jul 11 06:09:35 2008 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xef7517xx> <pcomp> <accomp>]
Fri Jul 11 06:10:05 2008 : LCP: timeout sending Config-Requests
Fri Jul 11 06:10:05 2008 : Connection terminated.
Fri Jul 11 06:10:05 2008 : PPTP disconnecting...
Fri Jul 11 06:10:05 2008 : PPTP disconnected
2008-07-11 06:10:05 PDT --> Client with address = 192.168.1.63 has hungup
I am still using 10.5.3. This may be very obvious to someone, but I'd appreciate any help.
Thanks!
ScottI am having sever issues with routers vs. VPN and I am hoping someone here can tell me how they got PPTP and L2TP working through the Apple Airport Extreme.
Basically, I used to have a cheap, old, but perfectly working Linksys router. I opened ports for PPTP and L2TP pass through and VPN worked fine. I decided to upgrade the router because I wanted something with basic firewall functionality...
I tried two new linksys products and gave up in disgust. Then I thought I had a brainwave and ordered the Apple Extreme Base Station. Well, this is almost as hopeless.
I can get PPTP to connect now but the remote clients can't connect to the AFP server. L2TP simply won't work. I have 1701, 500, 1723 and 4500 ports forwarded to my server so I don't know what I am doing wrong.
Also, I see on Apple's Server page that the Server will set up the Apple Extreme Base Station automatically??? How does this work?
Lastly, Do I want to enable NAT port mapping protocol?
Thank you,
Gareth -
Wvdial LCP: timeout sending Config-Requests
So I have one PC with GT max UMTS pcmcia card (nozomi), it is connecting fine while I am booted into Ubuntu, while I am moving to arch
I can not make it working from this linux.
wvdial is giving me LCP: timeout sending Config-Requests
What could be wrong?
Last edited by marwooj (2009-08-25 14:37:27)Hello marwooj!
Has every related application got the same version? Did you try with the same kernel, etc ? -
Dialup Internal modem error - LCP: timeout sending Config-Requests
Whether I use an iMAC G4 internal modem, or a Powerbook G4 internal modem, I receive the same Connection Log error on both machines. Objective: Modem dial-up to Sympatico ISP in Sherbrooke, Canada.
Setup is to use the v.92 protocol of the Apple Internal 56k modem.
Log excerpts:
:Modem Reliable Link Established
:Modem Compression Established
:Serial Connection established
:using interface ppp0
:Connect: ppp0 <-> /dev/cu.modem
:LCP:timeout sending Config-Requests
:Connection terminated
The funny thing is that I have better success early mornings, whereas, late at night it is almost never connecting. Better success in the morning usually means trying between 3 to 5 times before a successful connection is made.
A PC laptop using the same physical POTS line and dialing the same Sympatico ISP number can connect on the first time, every time.
Very frustrating. If you have any suggestions, please...Hello marwooj!
Has every related application got the same version? Did you try with the same kernel, etc ? -
VPN PPTP SBS2003 LCP: timeout sending Config-Requests
When using a 3rd party app (DigiTunnel), I can connect to my office network (Windows Small Business Server Premium 2003R2).
Using Internet Connect in 10.4.11, it worked a few times then stopped.
Here's the connection log:
PPTP connection established.
Using interface ppp0
Connect: ppp0 <--> socket[34:17]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x368b037d> <pcomp> <accomp>]
*LCP: timeout sending Config-Requests*
Connection terminated.
PPTP disconnecting...
PPTP disconnected
Any suggestions? TIAVPN has been a continuing issue in or organisation. There could be more than one issue problem causing the issues we have, however we have found that our Netgear router appears to have issues. After a bit of research on other forums I found other people who had flagged other Netgear routers as having similar issues and that VPN connections could be reestablished buy turning on and off settings with in the control panel for the router. Doing so jogs it working again for no apparent reason, even when the resulting settings are exactly the same as before.
It is because of this reason and other issues I have had with other Netgear routers that I have decided that I cant fully fix our issues with VPN until we have replaced our router with something more suitable. -
CCP timeout sending Config-Requests
Hey Guys,
I could really use some help on a VPN issue we're having. I've included the logs, for some reason it appears after the connection is established, the MacBook Pro sends a CCP ConfReq, the server sends back the same ConfReq like it should, the MacBook Pro acknowledges the required type of encryption. But instead of the connection being established the MacBook Pro sends another ConfReq, and thus the loop begins until a CCP timeout is issued.
Mon Mar 30 21:46:42 2009 : PPTP connecting to server 'xxx.xxx.xx.xxx' (xxx.xxx.xx.xxx)...
Mon Mar 30 21:46:44 2009 : PPTP connection established.
Mon Mar 30 21:46:44 2009 : using link 0
Mon Mar 30 21:46:44 2009 : Using interface ppp0
Mon Mar 30 21:46:44 2009 : Connect: ppp0 <--> socket[34:17]
Mon Mar 30 21:46:44 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x1ea49aec> <pcomp> <accomp>]
Mon Mar 30 21:46:44 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x3620b124> <pcomp> <accomp>]
Mon Mar 30 21:46:44 2009 : lcp_reqci: returning CONFACK.
Mon Mar 30 21:46:44 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x3620b124> <pcomp> <accomp>]
Mon Mar 30 21:46:45 2009 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x1ea49aec> <pcomp> <accomp>]
Mon Mar 30 21:46:45 2009 : sent [LCP EchoReq id=0x0 magic=0x1ea49aec]
Mon Mar 30 21:46:45 2009 : rcvd [LCP EchoReq id=0x0 magic=0x3620b124]
Mon Mar 30 21:46:45 2009 : sent [LCP EchoRep id=0x0 magic=0x1ea49aec]
Mon Mar 30 21:46:45 2009 : rcvd [CHAP Challenge id=0xcc <4cffc842ae922ad57364e8ff3abebf5f>, name = "R-D-Server.local"]
Mon Mar 30 21:46:45 2009 : sent [CHAP Response id=0xcc <441c2d53db85b913afd51e7afa51bbbe000000000000000069301b4c115e4b4ea0419e4c1ca26d 39aef469e8a224e99c00>, name = "Paul Fletcher"]
Mon Mar 30 21:46:46 2009 : rcvd [LCP EchoRep id=0x0 magic=0x3620b124]
Mon Mar 30 21:46:50 2009 : rcvd [CHAP Success id=0xcc "S=A8070268F49A81E86C6468E0F72CBAE2F6E25CCF M=Access granted"]
Mon Mar 30 21:46:50 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:46:50 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:46:50 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:46:53 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:46:53 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:46:53 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:46:56 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:46:56 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:46:56 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:46:59 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:46:59 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:46:59 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:02 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:02 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:02 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:05 2009 : sent [LCP EchoReq id=0x1 magic=0x1ea49aec]
Mon Mar 30 21:47:05 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:05 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:05 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:08 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:10 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:10 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:11 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:14 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:17 2009 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:19 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:19 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:20 2009 : CCP: timeout sending Config-Requests
Mon Mar 30 21:47:25 2009 : sent [LCP EchoReq id=0x2 magic=0x1ea49aec]
Mon Mar 30 21:47:36 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:36 2009 : sent [CCP ConfReq id=0x2 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:36 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:39 2009 : sent [CCP ConfReq id=0x2 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:42 2009 : sent [CCP ConfReq id=0x2 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:45 2009 : sent [CCP ConfReq id=0x2 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:45 2009 : sent [LCP EchoReq id=0x3 magic=0x1ea49aec]
Mon Mar 30 21:47:45 2009 : rcvd [LCP EchoReq id=0x1 magic=0x3620b124]
Mon Mar 30 21:47:45 2009 : sent [LCP EchoRep id=0x1 magic=0x1ea49aec]
Mon Mar 30 21:47:48 2009 : sent [CCP ConfReq id=0x2 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:51 2009 : sent [CCP ConfReq id=0x2 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:54 2009 : sent [CCP ConfReq id=0x2 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:47:57 2009 : sent [CCP ConfReq id=0x2 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:48:00 2009 : sent [CCP ConfReq id=0x2 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:48:03 2009 : sent [CCP ConfReq id=0x2 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:48:05 2009 : sent [LCP EchoReq id=0x4 magic=0x1ea49aec]
Mon Mar 30 21:48:06 2009 : CCP: timeout sending Config-Requests
Mon Mar 30 21:48:09 2009 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:48:09 2009 : sent [CCP ConfReq id=0x3 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:48:09 2009 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:48:12 2009 : sent [CCP ConfReq id=0x3 <mppe +H -M +S -L -D -C>]
Mon Mar 30 21:48:13 2009 : Hangup (SIGHUP)
Mon Mar 30 21:48:13 2009 : sent [LCP TermReq id=0x2 "User request"]
Mon Mar 30 21:48:16 2009 : sent [LCP TermReq id=0x3 "User request"]
Mon Mar 30 21:48:19 2009 : Connection terminated.
Mon Mar 30 21:48:19 2009 : PPTP disconnecting...
Mon Mar 30 21:48:19 2009 : PPTP disconnected
Any help you can provide would be greatly appreciated!
Thanks,
PaulSounds like you might have a problem with your vpn_blahblah user. Do you have one in LDAP? If so have you recently demoted/promoted OD, rebuild OD, or throw OD around in bed?
-
How to send two request in the same connection with HttpURLConnection?
As the title, I want to send two or more requests in the same connection with HttpsURLConnection..I wish all requests are in the same session.
My code is as following:
package test1;
//import javax.net.ssl.*;
import java.net.*;
import java.io.*;
public class httptest {
public httptest() {
public void test() {
HttpURLConnection uc = null;
String urlStr="";
urlStr="http://172.16.245.151/test/page1.jsp";
try {
URL u = new URL(urlStr);
uc = (HttpURLConnection) u.openConnection();
uc.setRequestMethod("GET");
uc.setDoOutput(true);
// uc.connect();
OutputStream out = uc.getOutputStream();
out.flush();
out.close();
catch (Exception ex) {
System.out.println(ex.getMessage());
public static void main(String[] args) {
httptest tt = new httptest();
tt.test();
The sample class just can send a request..Now we think of the sentence :uc = (HttpURLConnection) u.openConnection();
Obviousely, a HttpURLConnection can just have a Object of the Class URL, and the Class URL have no setURL mothed. So I can't use a HttpURLConnection to send two request.
I just want the HttpURLConnect is the same to IE...Do you understand what I mean?
Any helps will be appreciated...As the title, I want to send two or more requests in the same connection with HttpsURLConnection..I wish all requests are in the same session.
My code is as following:
package test1;
//import javax.net.ssl.*;
import java.net.*;
import java.io.*;
public class httptest {
public httptest() {
public void test() {
HttpURLConnection uc = null;
String urlStr="";
urlStr="http://172.16.245.151/test/page1.jsp";
try {
URL u = new URL(urlStr);
uc = (HttpURLConnection) u.openConnection();
uc.setRequestMethod("GET");
uc.setDoOutput(true);
// uc.connect();
OutputStream out = uc.getOutputStream();
out.flush();
out.close();
catch (Exception ex) {
System.out.println(ex.getMessage());
public static void main(String[] args) {
httptest tt = new httptest();
tt.test();
The sample class just can send a request..Now we think of the sentence :uc = (HttpURLConnection) u.openConnection();
Obviousely, a HttpURLConnection can just have a Object of the Class URL, and the Class URL have no setURL mothed. So I can't use a HttpURLConnection to send two request.
I just want the HttpURLConnect is the same to IE...Do you understand what I mean?
Any helps will be appreciated... -
Send Meeting requests in a calendar format with alerts/reminders?
To be able to set up Meetings that will automatically notify invited attendees.
Have you installed the lightning calendar add-on? Sounds like you have not and need to.
-
How to remove boot options while booting in mac with the options key
I've just installed windows trough bootcamp, but somethings went little bit wrong,
Everythings works fine, mac works and windows 7 works properly. But when i hold down the option key while booting i dont have the normal 3 options (Mac, Windows, Mac Restore). I now see these options (MAC, Windows, Windows, Windows efi, mac restore).
MAC -> works fine
1e windows -> (error no operating system installed)
2e windows -> works fine
3e Efi windows (boots into mac)
MAc restore -> works fine
So is there an way to clean up these options?
ThanksYou think someone will use Boot Camp Assistant?
EFI is / was always there. Sometimes it shows up (from using Disk Warrior).
Windows has its own 100MB system reserved as well that is the boot area.
I'd start with Lion Recovery, show hidden features and partitions, and check the health of all, and repair HFS volume.
Also try your Windows DVD and see if it sees a problem. -
Sending multiple request approval at one time
Hi,
Im working on a senario thats sending multiple request approvel at one time with HWC application. For example , client approves one request and it approves multiple requests at one time as well. Is it possible make this with HWC ?
Thanks in advance.If you have a list key, it'll have child MessageValueCollection keys (specifically, the value of that list key will be an array of MessageValueCollection objects). Each MessageValueCollection has a state, "add", "update", "delete" or empty. By specifying mappings between list key actions and MBO operations, or by doing so manually in the WorkflowClient.xml, you can specify which MBO operation will be invoked for each "add" MessageValueCollection, which MBO operation will be invoked for each "update" MessageValueCollection and each "delete" MessageValueCollection when the message is submitted to the server via an Online Request or Submit Workflow, where it will loop through the MessageValueCollections and execute the appropriate MBO operation for each.
In the tooling, you can do this by having a listview bound to that list key and having subsequent screens that invoke Add/Update/Delete List Key Collection menuitems. In that scenario, when you update the rows in the listview, the effects don't occur immediately, but rather wait until you submit them as a batched operation, which will behave as described above. -
Azure Sql DB Export to Storage Container fails with "An error occurred while sending the request"
I've built a new VM from which I'm running PowerShell scripts to backup my databases. It had worked before on an old server for several months, and worked once on the new server, then I upgraded my Azure PowerShell cmdlets, and haven't been able to
get it to work again. The new version is 0.8.10.1.
Below is my source code, with sensitive stuff replaced with ?'s. When I display the $stctx and $dbctx, they seem to have reasonable values. I added the IP address of the server as an exception to the db firewall, and I've installed SQL Server
Mangement Studio and verified that I can connect to the database. I have a feeling there's something simple I've overlooked.
Here's are both error messages:
Start-AzureSqlDatabaseExport : An error occurred while sending the request.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Start-AzureSqlDatabaseExport : Error while copying content to a stream.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Here is the source code:
param($dbname)
if ($dbname -eq $null) {
write-host "Database code must be specified"
return
$password = "????"| ConvertTo-SecureString -asPlainText -Force
$servercredential = new-object System.Management.Automation.PSCredential("????", $password)
$dbsize = 1
$dbrestorewait = 10
$dbserver = "????"
$stacct = $dbname
$stkey = "????"
$stctx = New-AzureStorageContext -StorageAccountName $stacct -StorageAccountKey $stkey
$dbctx = New-AzureSqlDatabaseServerContext -ServerName $dbserver -Credential $servercredential
$dt = Get-Date
$timestamp = "_" + $dt.Year + "-" + ("{0:D2}" -f $dt.Month) + "-" + ("{0:D2}" -f $dt.Day) + "-" + ("{0:D2}" -f $dt.Hour) + ("{0:D2}" -f $dt.Minute)
$bkupname = $dbname + $timestamp + ".bacpac"
write-host "db context"
$dbctx
write-host "storage context"
$stctx
write-host "Backup $dbname to $bkupname"
Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx -StorageContainerName databasebackup -DatabaseName $dbname -BlobName $bkupnameHi Brad,
Mentioned script, with appropriate values, works on my system.
I'm able to export an Azure SQL database to blob storage. Am using version 0.8.10.1 of cmdlets, so this the same version mentioned in this problem description.
Can you please try using Add-AzureAccount and check if that helps. This is indicated in a different third-party blog.
http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1%29."http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1
Does it work from a different machine with newly downloaded credentials.
Does it work for a newly created database (so minimal database size).
If above do not work, we may require additional details like RequestID, StorageAccountName, ServerName so an MS ticket may be more appropriate.
Girish Prajwal -
Transportation failed while sending a request from DEV - Quality
Hi sdns,,,
I got an error while sending a request from DEV -> Quality...Am new to transportation.. mayi know.. wat was this error and wat kind of action i need to take over here...
I got an error message like this,,
Start of the after-import method for object type R3TR ELEM (Activation Mode)
Element 0QWSUMHUOOK19OOUIFCLB4T8C was copied from 'modified' to 'active'
Error when activating element 45HKXU7KAG6V1I0L1W3LWEDZC
Element 3Z571P6G8RCDNR3NQAEI8S6YW is missing in version M
Start of the after-import method for object type R3TR ELEM (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20070417044624
Post-import methods of change/transport request I11K903499 completed
Start of subsequent processing ... 20070417044621
End of subsequent processing... 20070417044624
Answering getz really appreciated,
Thanks & Regards,
AluriHi,
This error will come when your are transporting any Query/ BW elements to Production system.
when there is element in the deve. class $TEM in your collected objects this error may come, so identify this elements and change this Dev.class to other package used in transportaion.
To change all the elements to common dev. class first collecting the elements using transport connection. secondly, using the Pencil button at the menu of trasnport change to required dev.class.
you can change individaul elements also.
Regards,
Vish. -
Error 401 while sending SOAP Request to XI
hi friend ..
i am getting Error 401 while sending SOAP Request to XI..
can u suggest me where may be the error?
thanks..Hi,
Refer these threads:
Testing XI SOAP scenario via XMLSpy
Re: SOAP Sender ADAPTER 401 No Authorisation
Re: XI Web Service - Code: (401) Unauthorized.
Try soap client https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9b16d790-0201-0010-4e9b-baa5f42830d8
Regards
Suraj -
HTTP error while sending SOAP request using wsdl file
We created SOAP request using the wsdl file ; while sending SOAP request from Altova XMLSpy, we are getting the below error.
HTTP error: could not post file
Can you please explain how to resolve this issue
Regards,
Sanghamitrathere is very little information to help you here.
Can you confirm if this is a SOAP sender scenario or SOAP receiver scenario?
Also do go to thru these links to help you out;
Troubleshooting
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> SOAP
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
SOAP <-> XI <-> RFC/BAPI
Walkthrough - SOAP XI RFC/BAPI -
Problem while sending/Receiving request using the HttpURLConnection obj
Hi,
We are facing the problem while passing the request in Weblogic.
Looks like there is some problem with Weblogic while sending/Receiving the request using the HttpURLConnection object.
Currently we are migrating 2 applications to WebLogic. Application1 to application2 request should pass.
Below is some example we tried:
"When we send a request to our code using the SSOAdaptor code (which handles the request/session in our application) which is on the SunOne server the request parameters are received by our code successfully. And also in Create User Functionality of application1 we are sending a request to webpass(which is on Sunone Server) using the HttpURLConnection object and the SOAP request is received successfully by the Webpass."
Looks like when we send request (using HttpURLConnection) from a server other than Weblogic to a servlet in a Weblogic the request parameters are received with out issues.
Where as when the request is sent from WebLogic to WebLogic the request parameters are missing some how.
Is there any issue in Weblogic? Please helpus on this.
Thanks,
Nagesh
Edited by: user9307541 on Mar 15, 2010 5:08 AMHi,
Please find below scenario for testing.
We have tested the SSOAdaptor code (it is the fucntion name which will send the data from source) locally by hittiing the WPS adaptor URL in a Java client program(TestRequest.java) and the request parameters were reaching the WPS Adapter successfully.
Then we have written two test servlets to test the communication between SSOAdaptor(TestServlet.java) and WPS adaptor(WPSServlet.java).
Functionality of TestSevlet: It is sending a request to WPSServelt similar to the way we are doing it in SSOAdaptor.
Functionality of WPSServlet: It will receive the request parameters and write the parameter Map to console.
We have deployed and these two servlets(in a single webapplication) on Tomcat server and the request parameters are reaching the WPSServlet successfully.
Output on Tomcat server:
before sending request
**********************Inside WPS Servlet -- the request Map is:{TypeAcc=[Ljava.lang.String;@14e3f41, ServiceName=[Ljava.lang.String;@1acd47, GMEPortalUserID=[Ljava.lang.String;@19b04e2, UserID=[Ljava.lang.String;@5dcec6, Country=[Ljava.lang.String;@b25b9d}
after sending request
After this we have deployed these two servlets (with in a single webapplication) on the Weblogic server in Dev machine(path: /apps/usmport/domains/usmport/servers/usmport_admin/upload/ssoAdaptor/WEB-INF/classes/com/gm/gmeportal/security/adaptor) and
now the request parameters are not reaching the WPSServlet.
Output on Weblogic Server:
before sending request
**********************Inside WPS Servlet -- the request Map is:{}
after sending request
Looks like there is some problem with Weblogic while sending/Receiving the request using the HttpURLConnection object.
When we send a request to WPSAdaptor using the Old SSOAdaptor code which is on the SunOne server the request parameters are received by WPS successfully. And also in Create User Functionality of Portal we are sending a request to webpass(which is on Sunone Server) using the HttpURLConnection object and the SOAP request is received successfully by the Webpass.
Looks like when we send request (using HttpURLConnection) from a server other than Weblogic to a servlet in a Weblogic the request parameters are received with out issues. Where as when the request is sent from weblogic to weblogic the request parameters are missing some how.
Please find below javs source code used to test this:
TestRequest.java
import java.io.BufferedReader;
import java.io.DataOutputStream;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.MalformedURLException;
import java.net.URL;
public class TestRequest {
* @param args
public static void main(String[] args) throws Exception{
// TODO Auto-generated method stub
excutePost("http://localhost:8080/Testing/TestServlet", "GMEPortalUserID=captest.wss@it0555&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
//System.out.println("********** Now the request is from SSO *****************");
//excuteGet("http://10.156.0.173:7013/channel21/wpsadapter", "GMEPortalUserID=captest.wss@it0554&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
public static String excutePost(String targetURL, String urlParameters)
URL url;
HttpURLConnection connection = null;
try {
//Create connection
url = new URL(targetURL);
connection = (HttpURLConnection)url.openConnection();
connection.setRequestMethod("POST");
connection.setRequestProperty("Content-Type",
"application/x-www-form-urlencoded");
connection.setRequestProperty("Content-Length", "" +
Integer.toString(urlParameters.getBytes().length));
connection.setRequestProperty("Content-Language", "en-US");
connection.setUseCaches (false);
connection.setDoInput(true);
connection.setDoOutput(true);
//Send request
DataOutputStream wr = new DataOutputStream (
connection.getOutputStream ());
wr.writeBytes (urlParameters);
wr.flush ();
wr.close ();
//Get Response
InputStream is = connection.getInputStream();
BufferedReader rd = new BufferedReader(new InputStreamReader(is));
String line;
StringBuffer response = new StringBuffer();
while((line = rd.readLine()) != null) {
response.append(line);
response.append('\r');
rd.close();
System.out.println("Response is:" + response);
return response.toString();
} catch (Exception e) {
e.printStackTrace();
return null;
} finally {
if(connection != null) {
connection.disconnect();
public static String excuteGet(String targetURL, String urlParameters) throws Exception
URL url = new URL(targetURL);
HttpURLConnection httpurlconnection =
(HttpURLConnection) url.openConnection();
/*httpurlconnection.setRequestProperty(
"cookie",
constructRequestParams(httpservletrequest.getCookies()));*/
httpurlconnection.setDoOutput(true);
httpurlconnection.setDoInput(true);
httpurlconnection.setRequestProperty(
"Content-length",
String.valueOf(urlParameters.length()));
OutputStream outputstream = httpurlconnection.getOutputStream();
outputstream.write(urlParameters.getBytes());
outputstream.flush();
//Get Response
try{
InputStream is = httpurlconnection.getInputStream();
BufferedReader rd = new BufferedReader(new InputStreamReader(is));
String line;
StringBuffer response = new StringBuffer();
while((line = rd.readLine()) != null) {
response.append(line);
response.append('\r');
rd.close();
System.out.println("Response from SSO is:" + response);
return response.toString();
} catch (Exception e) {
e.printStackTrace();
return null;
} finally {
if(httpurlconnection != null) {
httpurlconnection.disconnect();
TestServlet.java
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.URL;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* Servlet implementation class TestServlet
public class TestServlet extends HttpServlet {
private static final long serialVersionUID = 1L;
* Default constructor.
public TestServlet() {
// TODO Auto-generated constructor stub
* @see HttpServlet#doGet(HttpServletRequest request, HttpServletResponse response)
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
// TODO Auto-generated method stub
doPost(request,response);
* @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse response)
protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
// TODO Auto-generated method stub
//System.out.println("********************** the request Map is:" + request.getParameterMap());
try {
System.out.println("before sending request");
excuteGet("http://localhost:7003/ssoAdaptor/WPSServlet", "GMEPortalUserID=captest.wss@it0554&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
System.out.println("after sending request");
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
public String excuteGet(String targetURL, String urlParameters) throws Exception
URL url = new URL(targetURL);
HttpURLConnection httpurlconnection =
(HttpURLConnection) url.openConnection();
/*httpurlconnection.setRequestProperty(
"cookie",
constructRequestParams(httpservletrequest.getCookies()));*/
httpurlconnection.setDoOutput(true);
httpurlconnection.setDoInput(true);
httpurlconnection.setRequestProperty(
"Content-length",
String.valueOf(urlParameters.length()));
OutputStream outputstream = httpurlconnection.getOutputStream();
outputstream.write(urlParameters.getBytes());
outputstream.flush();
//Get Response
try{
InputStream is = httpurlconnection.getInputStream();
BufferedReader rd = new BufferedReader(new InputStreamReader(is));
String line;
StringBuffer response = new StringBuffer();
while((line = rd.readLine()) != null) {
response.append(line);
response.append('\r');
rd.close();
//System.out.println("Response from SSO is:" + response);
return response.toString();
} catch (Exception e) {
e.printStackTrace();
return null;
} finally {
if(httpurlconnection != null) {
httpurlconnection.disconnect();
WPSServlet.java
import java.io.IOException;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* Servlet implementation class WPSServlet
public class WPSServlet extends HttpServlet {
private static final long serialVersionUID = 1L;
* @see HttpServlet#HttpServlet()
public WPSServlet() {
super();
// TODO Auto-generated constructor stub
* @see HttpServlet#doGet(HttpServletRequest request, HttpServletResponse response)
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
// TODO Auto-generated method stub
System.out.println("**********************Inside WPS Servlet -- the request Map is:" + request.getParameterMap());
* @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse response)
protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
// TODO Auto-generated method stub
doGet(request,response);
Thanks,
Nagesh
Maybe you are looking for
-
Playing a third-party audiofile through iTunes
I downloaded an audiobook file from iAmplify and thought it would be a breeze to start listening, but I'm missing something. Can't get through to their tech support either! (Note to self: don't order from them again!) The downloaded file is on my des
-
Delta document for 3.0 to 3.1 upgrade
Hello All, We are upgrading from BW 3.0 to 3.1. can anyone please provide me with link for delta document. Regards, Ruby
-
Query doesn't pull data within Report
Hi All, For some odd reason, I can run the following query against my informix database using DbVisualizer or Sql Editor just fine. But when I press F5 in Crystal report, I get nothing back. Any suggestions? SELECT screenlog.user_id, screenlog.se
-
Does anyone know how to fix these?
-
Adding a new Tab In the Tab Strip - T Code Co01
Hii.. Please Suggest me How I should add an New Tab in the Tabstrip in T Code SO01.? On Clicking the new tab ,a new Screen has to be Called.& some Custom fields requires to be Captured I have identified an Enhancement PPCO0012 Please let me know