IPDA 2 Safari - can't access windows to close.

8 windows open but cant get to them. The touch button to access the windows seems to feel the touch, but won't open to the 8 windows. Only the address/path bar is active for typing. The web page below is greyed out. Help!!!

Go to the Home screen by clicking the Home button. Bring up the "recent apps" tray by double-clicking the Home button. Touch and hold on the Safari icon until a red "-" appears at the corner. Touch the "-" sign on the Safari icon to terminate it.

Similar Messages

Yosemti OSX 10.10.1 Safari can NOT access US Schwab web site. Chrome could. Why???

OSX10.10.1 Yosemti Safari can NOT access US Charles Schwab web site.
Chrome could. Why????

Many financial cites are just not compatible with Safari. Contact Schwab and ask them.
Similar to your other post:
OSX Yousemite Safari could NOT accesss US Citibank web site. Chrome could. Why???

Safari can't access some sites

My husband's work has a website they need to access to get info about the company. We only have my iMac at home, and I think the site is mainly compatible with Internet Explorer, which of course is not available to Macs anymore, or at least I know it doesn't work on mine (won't even open). Is there any way Safari can get a plug in or something to help him access his website? We keep getting the 404 error _file not found , or page not found.
The answer is probably no, which he is really upset about~why should he have to go buy a second computer just to access a work site, but maybe somewhere here has encountered a solution.
Thanks!
Susan

It sounds like this particular website has some issues.
But here's something that is sometimes useful: You can get a Developer's "Debug" menu to appear in Safari, and under this menu is an option to select "User Agent." This allows Safari to present itself as a different browser type -- including MS IE 6.0 for Windows. Of course, Safari is not really IE, and this won't make it act like IE, but if a server is rejecting your requests simply because of the browser it thinks you're using, then this might work.
Here's how to get the Debug menu to show: Open Applications > Utilities > Terminal.app. At the prompt, type exactly the following...
defaults write com.apple.Safari IncludeDebugMenu 1
The next time you launch Safari, a Debug menu will appear to the right of the Help menu. If you decide you want to hide this menu in the future, open Terminal and type the same command with a zero at the end instead of a one...
defaults write com.apple.Safari IncludeDebugMenu 0
Note: If you change the User Agent, then in order to restore the default of "Automatically Chosen," you must close Safari and reopen it. (For additional information about this feature, see Apple Developer - Safari FAQ.)

Safari can not access lokal Webserver

Hello,
we are using a locally installed wiki server (TWiki) for collecting information. My problem is that I can not access the webserver with OS X using Safari or Firefox. With my Windows PC it's no problem.
Safari says:
Safari kann den Server nicht finden.
Safari kann die Seite „http://ta-lab122/bin/view/“ nicht öffnen, da Safari den Server „ta-lab122“ nicht finden kann.
Safari can not find the server.
But the server is pressent in the Network on Finder. Does anybody has an Idea what service I have to activat? On other Mac PC in the Network it's also not working

HI and Welcome to Apple Discussions...
Try using Open DNS
Click the OpenDNS Basic... it's free. Just follow the instructions.
See if that will help...
Carolyn

Safari can't access orange email?

Any known problems with safari accessing orange email on an ipad?

Same here!!! Apple this is very annoying my company use the port 6666 for Ganglia open source monitoring.... i'm unable to connect this port only via Safari!
I installed "lynx" and the website works like a charm...
Please help to fix this ASAP... how can I configure the "unsafe" ports by myself?!? let me be free Apple shame on you again!
1. My firewall is off.
2. ERROR on Safari: "Safari can't open the page … The error is "Not allowed to use restricted network port" (WebKitErrorDomain:103)"

Can't access windows or dv6t-3000 recovery partition after unix boot menu removal.

I have a dv6t-3000 laptop running Win 7 Home premium 64 bit; my son had put a unix partition on it. Since I tried to bypass the unix boot menu using MBR (the idea of my brother, the IT professional) the laptop just gives a unix error message at startup (error: no such partition. grub rescue> _) If I hit escape while starting up I get the startup menu including F11 System Recovery but Fn+F11 (it's a laptop) does nothing and hitting the F11 key itself just sends me back to the Unix error message.
Shamefully I never made a set of recovery discs; how can I boot into Recovery? Would the Recovery USB flash disk utility work, or screw things up further? Any help would be appreciated!

Sadly, I must recommend that you purchase a recovery disc set.
Playing around with Linux ( probably ReiserFS) and MBR does bad things to the Windows boot sector. One option is to reinstall GRUB. The second option is If your brother can find a Windows 7 64-bit repair disc for you, then you may be able to repair the boot sector. That should make the original Windows 7 installation useable again. Otherwise you will need the recovery disk set to restore all functionality, including the recovery partition and the F11 recovery manager access.
Sorry to bear bad news.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Safari can not access any secure (HTTPS) web pages

Does anyone have an idea why a good frined of mine using Safari 1.3.2 on a Power Book G4 with Mac OS 10.3.9 can not access any secure web pages (those that start with HTTPS)? I can not find any preferences that might control this. She can access the pages with IE but not Safari. What setting on her computer might control this? Any ideas would be appreciated. I even through away (com.apple.Safari.plist) file. Not change. An ideas??

I have the same problem! However, this is ONLY while running wireless internet. Anytime I want to use an HTTPS site, I have to plug directly into my router, so I'm not wireless anymore, and then it works fine. Every now and then (like maybe 5% of the time), I get lucky and it will work for a short while such as logging into yahoo mail for example (logging into here didn't work at first but after waiting a bit, i was able to log in), but trying to stay on a secure connection such as a bank accnt. is impossible.
Any help would be GREATLY appreciated! Everyone I've asked says they've never had the problem. I thought I was the only one.
I checked my proxy settings -- nothing is checked. I've tried deleting preferences and I reset safari often.

Windows 7 64bit can't access Windows 7 32bit within the local network

Hello,
We have one 64bit PC and ten 32bit PCs in our local office network.
Recently the 64bit PC is unable to access some of the other 32bit PCs in random basis. When it happens, all the other PCs are unable to access the 64 bit PC.However, the 64bit PC can still access the internet without problem.
Everything will be back to normal after rebooting the 64bit PC.
Is there any solution about this problem?

Hi,
First, this is not related to a 32 bit machine or a 64 bit machine, also I want to know how can you access the other computers, visit a shared folder or remote desktop connection? This is related a network issue.Check whether the network discovery
is turned off, to turn on network discovery:
1. Open Advanced sharing settings by clicking the Start button Picture of the Start button, and then clicking Control Panel. In the search box, type network, click Network and Sharing Center, and then, in the left pane, click Change advanced sharing settings.
2.Click the chevron Picture of the chevron icon to expand the current network profile.
3.If network discovery is off, under Network discovery, click Turn on network discovery, and then click Save changes.
Details about shared folder visit can be seen:
http://windows.microsoft.com/en-hk/windows7/why-can-t-i-connect-to-other-computers
Regards
Wade Liu
TechNet Community Support

Can't Access Windows and Storage Paritions

I've been trying to figure out how to access partitions on my system other than the Arch Linux partition. I am currently using KDE and I suspect the problem my arise from here. If I just boot into a console or open up one with Ctrl+Alt+F2, I can manually mount and access all drives. Additionally, if I am logged into KDE as root, I can still access all drives. The problem only appears when I attempt to access the drives as a user. I have given the user all administrative privileges. When I click on the drive to access it, however, Dolphin prompts me for a password. Naturally, I enter the password I use for the root user but that seems to be the wrong password. After a few more attempts with different passwords, I get an error saying:
"An error occurred while accessing '60.0 GiB Hard Drive', the system responded: An unspecified error has occurred: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
I don't know why I would be blocked from accessing this drive especially since I have the root password.

It's asking for your user password; not the root password.
Is your user account in the sudo group?

I can not access windows partition after an unexpected shutdown

Hello everyone,
while I was working on my windows partition(windows 7 ultimate) in my imac 27' i5, a strong and continuous error sound and black screen appeared without shut down the machine,so I pressed the button( in the back of my monitor which is used to start up my machine).
After that windows partition only starts with safe mode (where so no much I can do),(in normal mode a blue window appears which says something about remove hardware, error and some things which I can not read cause it disappears too quickly (1sec).
So,after several efforts in save mode I understand that there was a problem with an installation of an antivirus program,which had not been installed correctly,and in save mode I got a message of catastrophic failure,and also I can not uninstall or remove this program under safe mode.
Till now I have been advised to delete bootcamp partition,and create it again and run windows again,so do you think this is the only solution?
Is there any way to access bootcamp files and modify under macintosh?
I need to mention that I have imac about two months, and usually I use windows partition (because I work with a program which is not supported by macintosh).
Also, do you think that deleting windows partition and creating again is there any case to harm my mac?
Which edition of windows is better compatible? (If there is one)

There is a Boot Camp forum that can probably do a better job at answering your question. It's possible because your system is messed up in Windows that all you need to do is hold down the Option key when starting your computer and then choose the partition to start from. There isn't a problem with OS X or Windows 7 I suspect it's what you have done by not following instructions on installing and removing software. If you do choose to remove the Windows partition then use Boot Camp Assistant to properly uninstall. You can fin the Boot Camp forum at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Wireless bridge can't access windows certificate server

We have 10 Cisco 1200 wireless APs. The VLAN 1 use Windows certificate as authentication and VLAN 100 for the public. They work fine. We just bought two 1310 wireless bridges for outdoor use. We contact Cisco support for setup these two bridges. The wireless can receive the signal but can't logon. The IP is 169.254.x.x. The Certificate server receive Event ID 2 as below. The Cisco engineer can't make it work and he said the setup Windows IAS is not his expertise. Any suggestions how can we fix this issue?
Event Type: Warning
Event Source: IAS
Event Category: None
Event ID: 2
Date: 4/13/2007
Time: 7:41:21 PM
User: N/A
Computer: DEVICES
Description:
User blin was denied access.
Fully-Qualified-User-Name = chicagotech.net/Users/Bob Lin
NAS-IP-Address = 10.0.20.54
NAS-Identifier = Outdoor_1300_2
Called-Station-Identifier = <not present>
Calling-Station-Identifier = <not present>
Client-Friendly-Name = Root Bridge1
Client-IP-Address = 10.0.20.54
NAS-Port-Type = Async
NAS-Port = <not present>
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = All
Authentication-Type = PAP
EAP-Type = <undetermined>
Reason-Code = 66
Reason = The user attempted to use an authentication method that is not enabled on the matching remote access policy.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 ....

There are too many variables at play here, and too many unknowns...both on the server and client side...so it would be hard for anyone to offer suggestions other than the face you should talk to your system/network admins.

Can't access Windows 7 network nor homegroup via router or ad-hoc

I have a really annoying problem. I have 2 clean computers. They were formatted and Win 7 ultimate was installed on both computers. They have a PCI wireless card (D-Link DWA 525). Their hardware is identical, same motherboard, etc, beside the "server"
is pentium 4 and the "client" is celeron.
We have 2 routers and 1 modem. The first router, Airport Extreme, act as DHCP server, and provides the wireless network. The second router (TimeCapsule), connected thought ethernet to the first router, extends the wireless network (act as a bridge). I can connect
to the network and the internet works fine.
The problem is with the local network.
I can see both computers on the network tab. I can ping both by IP and by name. I made a Homgroup on the computer "Server". The computer "client" joined. I can see the libraries. Both computer's firewall are disabled. All firewalls from
the routers and the modem are disabled.
Double-clicking the library on the Homegroup does nothing. Trying to access the shared folder by \SERVER or by the network tab gives error "network path not found".
Basic settings, like file and sharing, etc, are on. Password sharing is off. Encryption is 40 - 50 (not the 128, I don't remember the specific number).This is both for Home and Work and Public networks.
Because I couldn't access the network, I decided to make an ad-hoc. Same problems. Even with static IP (192.168.0.1 [server] and 192.168.0.3 [client], 255.255.255.0 subnet) and NetBios forced at enabled.
I just can't make it work. I have tried a lot of info from here and other forums, but nothing has work. The worst is that another PC will join the network, but I haven't do it yet just because I can't make these PCs to work. As a test, I did put the other PC
in the network (Win 7 Home), and the same problem applied.
All the computers can see them in the Network tab, ping either ways with both IP and name, but when trying to access the pc over network, it gives network path not found error.
Yes I have shared files.
Troubleshooting both Homegroup and Network finds nothing wrong or just can't fix the problem.
Please help!

Hi,
I tried and received only errors (i don't remember know which ones).
However, I plugged the PCs via ethernet, let automatic IP address, and now I can access the network from both computers. Homegroups doesn't work because the network is public, but that isn't a matter right now, because I can access the files.
This makes me thing if the problem is the network adapter. In the Advanced tab on Device Manager Properties, I have the follow options, which I don't have idea what are they for:
AC_BE support APSD [disabled]
AC_BK support APSD [disabled]
AC_VI support APSD [disabled]
AC_VO support APSD [disabled]
APSD capable [disabled]
Multimedia/Gaming Environment [Enabled]
Roaming Sensitivity [Medium]
WMM Capable [Enabled]
Do you think some of that options are interfering?
Thank you

Can't Access Windows 7 Partition after updating OSX to 10.8.2 - Will I be able to get my data back?

Itys does not appear in the boot list after holding down alt. I can still see it in disk utilities as a 66GB partition but it can't be veriefied or repaired from there. Any assistance in this matter would be greatly appreciated.

You'll still be able to access it unless a problem occurs. Back everything up first.
(114769)

Safari can't access the certificate website

My mac is giving me this message.
going to different websites.
Now it doesn't even let me access google
giving me: invalid URL

Sounds like you were not connected to the Internet, Try it again. It you are still having problems reset Safari by clicking the Safari menu item then select reset Safari.

How can I access Windows Media Player Firefox Plugin?

Microsoft Windows Media Player Firefox Plugin (in Firefox) is installed on my computer, but it is available to only a few applications. All the applications have a "Use other" application, but I cannot find the above mentioned plugin. Where do I "browse" to actually find it so I can use it with a particular application?

The information you referred me to allowed me to figure out what the name of the plugin file is that I am looking for. However, when I navigated to that file to enter it as the new plugin to use, the only thing that appeared was "No items match your search". Am I correct in assuming that this means that this plugin will not work for the application in question?
If that is true, is there a way to "force" it to use this plugin, just as a test to see if my hunch is correct?

IPDA 2 Safari - can't access windows to close.

Similar Messages

Maybe you are looking for