IPF is not allowing port 33439 to connect

Hi,
I'm using port 161(SNMP) and 33439 port as UDP ping for cacti, I noticed a strange behavior in some servers, even in ipf I allowed those ports, 33439 is failing to connect but the same is working on other servers, if I stop the IPF I'm able to connect the port 33439. Please helpme out on this
# monitor snmp and udp ping
pass in quick proto udp from 172.22.160.110/32 to any port=161
pass in quick proto udp from 172.22.160.110/32 to any port=33439
Thanks
Niranjan

- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz under Wireless tab
- Uncheck "Filter Anonymous Internet Requests" under Security tab
- Disable Fram Brust under Advance Wireless Settings
If the above option doesn't improve the performance then,try to reflash/upgrade the router's firmware,reset the router and reconfigure it from the scratch.

Similar Messages

Automatic update failed because I chose DO not Allow. Now, cannot connect to any servers. How do I fix this?

Yesterday Firefox did an automatic update. I was in a hurry out the door when I chose what I think was the wrong option. The options were., "Allow Always, "Allow only Once, or "Do Not Allow". I either chose allow only once, or do not allow because now I cannot connect to any server through Mozilla Firefox. How do I fix this problem?

Was that a message from your firewall?
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Why is my Apple ID not allowed to access iTunes Connect?

I'm trying to apply to post my podcast via iTunes, but in the process of trying to apply, I receive an error message informing me that my Apple ID is not authorized to access iTunes Connect. Any suggestions?

Are you able to sign into the iTunes Store and purchase items with that ID? If so I've no idea why you should get this message. However, though I'm not familiar with iTunes Connect, I'm not sure it's got anything to do with posting podcasts. To submit a podcast you go to
https://phobos.apple.com/WebObjects/MZFinance.woa/wa/publishPodcast
Is that what you've been doing?

WRT54GL not allowing Remote Desktop Web Connection

Im currently using a WRT54GL in a network with just two computer. Computer A is using a wired connection and Computer B is wireless with a Linksys adapter. Public IP address from ISP is a static IP address and all is setup in the router allowing both computers internet access with no problems. Both computers are setup with static IP. Computer A is 192.168.1.101. Computer B is 192.168.1.103. Both computers are installed with Internet Information Services.
1) Setting Up The Two Computers: I setup Computer A for port 50001, ie. I opened Control Panel, clicked Performance & Maint., Clicked Admin Tools, Double clicked IIS. Expanded Websites, right clicked Default Website and clicked on Properties. On the Website tab, I changed the value of the TCP port to the one above, 50001. I Opened the Properties Window of My Computer and clicked to the Remote tab. I placed a green Check into where it states, [Allow users to connect remotely to this computer]. On side note, I have admin rights to the computer so I did not click to [Select Remote Users]. I then accessed the Windows Firewall Settings, In the Exception Tab, I have Remote Desktop with a Check - Set with TCP 3389. I also added new port - game it Name: Remote Access, Port:50001. Settings were all saved. (I did all the same exact steps for Computer B, but the only difference is I used for 50002 instead)
2) Setting up the router: I access the router configuration with IP 192.168.1.1 Clicked to the Applications and Gaming. Selected [Port Range Forward]. Below where it tells to enter the ports and name for each port I entered for the first port. Application: FM-HS01, Start and End Ports: 50001 to 50001, Protocol: TCP, IP Address: 192.168.1.101, Enabled: {checked}. I again setup another below that for Computer B. FM-HS02, 50002 to 50002, TCP, 192.168.1.103, Enabled: {Checked}. I then clicked to Port Triggering screen. Under Application: [Remote Access], Trigger Range Start - End: [50001 to 50002], Forwarded Range Start - End: [3389 to 3389], Enabled [Checked]
Under the Security Tab for Firewall - I unchecked {Block Anonymous Internet Requests}, but have {Filter Multicast}, {Filter Internet NAT Redirection} , {Filter IDENT(Port 113)} all checked.
I also enabled remote access to router using default port 8080.
By using the ISP Static IP: ie http://64.193.93.46:8080/, I am able to access the router config page no problems. Problem is trying to access each Computer A and B. For Example: in IE address bar, I entered http://64.193.93.46:50001/ I get page stating Under Construction. Now if I try http://64.193.93.46:50001/tsweb/ I actually get the Microsoft Windows Remote Desktop Web Connection screen stating to enter Server __________ Size: and Connection Button. I enter the Computer Name for Computer A: FM-HS01, Choose the appropriate size and clicked connect. Page loads then all I see is an outline of a box where I assume the remote computer's screen should show. A message appears after trying to load stating: "
Remote Desktop can’t find the computer “FM-HS01”. This might mean that “FM-HS01” does not belong to the specified network. Verify the computer name and domain that you are trying to connect to."
This is where I have been ending up at. I have not able to get pass this part. Any Help Please??? I am not sure is there are other ports I would need to open along with the ones I have specified above. On another side note, my Antivirus software for both computers are CA eTrust AntiVirus which I have also configured for both computers.

Just change the ports to what ever you think of and be sure to make the right single port forwards (if you put comp A to 50001, make *.*.*.101:50001 forward and so on). Just be sure you are not running anything else on the same port, on the same computer (for excample the IIS terminal server client application). And from outside you just connect the remote desktop client to your external iport_number ie use the comp_ip:50001 for comp A in the client program connection window (not http:// in browser).
- who stole my beer? -

WRT610N V1 will not allow port forwarding via HP Mediasmart Server

I have the WRT620N router and an HP MediaSmart server connected to it. My source is a cable modem. WHen I try to set up the server for remote access, the router is not found. I am continually getting "Port Forwarding failed" errors from the server. I also have several iPhone apps used to control devices on the network (DVR, BluRay player,etc) that will not connect. (These worked before I changed to this router.)
I have verified that the UPnP is enabled.
I have been struggling with this issue for several months and have not had any luck getting help from the forums, but will tryi again.
Any help would be appreciated.
Thanks,
Joel WZ
Thanks,
Joel WZ

Did you tried to enable Remote Management Access on the router setup page?
If no, then Enable Remote Management Access under Administration tab and then check.

Can't update my Ipod classic's software. My Window's Vista Home Edition will not load the latest version of Itunes, and the older versions will not allow my Ipod to connect to the update server

I have an Ipod Classic, 80 gig. It's over 3 years old. I have a Samsung SensR410 laptop, also over 3 years old, running Vista Home Premium 32bit but '64bit Compatible'
I had iTunes 8.
One day my Ipod stopped working.
I formatted it.
I uninstalled iTiunes.
I re-installed iTunes.
But the latest version would not be loaded on my PC. I chose English as the language, but because I bought my laptop in Korea, some parts of the installation were in Korea. I uninstalled it, following the steps here: http://support.apple.com/kb/ht1923
I re-installed iTunes 8. It loaded, but when I plugged in my Ipod, it said that the Ipod needed to be updated/restored, 'click to contact updater' but then it could not contact the server. I tried: http://support.apple.com/kb/TS1814but it didn't help.
I tried downloading iTunes 9, it loaded, but the Ipod would not connect.
Help, please!

Hi Edward,
You should still be able to manually manage the music on your iPhone within iTunes. Make sure that when your iPhone is plugged in, look in the Summary tab to see if “Manually manage music and videos” is enabled and you can even you turn off Automatically Sync when this iPhone is connected. Take a look at the first article below to give more information on that. As far as your other questions about calling someone, I have provided two options for you. If it is for feedback on iTunes, you can use the second link to give detailed feedback on what is going on. If you want to actually talk to someone, the last link has a list of numbers for you to call for any support or service that you may need.
Manage content manually on your iPhone, iPad, and iPod
http://support.apple.com/en-us/HT201593
Product Feedback
http://www.apple.com/feedback/
Contact Apple for support and service
http://support.apple.com/en-us/HT201232
Take it easy,
-Norm G.

TimeCapsule not allowing my full ISP connection speed

Hello everyone,
I pay for a 30mbps internet connection and the only way to have it is to connect my MBP directly to the RJ-45 cable. Right now, I am connected wirelessly with my 500GB TC.
Would Airport Extreme or Airport express be faster? Any other brand I could buy? Or this is a wireless issue and the only way I can get that speed is being wired?
best regards

Welcome to the discussion area, floydstyle!
You are likely encountering some form of Wireless Interference that is preventing you from reaching higher speeds over your network.
If you test at an ethernet connection on the TC and get 25-27 Mbps speeds, it is very likely that you are picking up some wireless interference from cordless phones, other wireless networks, wireless security systems, etc.
Try changing the wireless channel on your TC to see if you can find some clear airspace that will allow quicker speeds.

Nokia 2730 does not allow to use socket connection

I recently bought a Nokia 2730 Classic, but I am not able to browse internet on this phone through the Socket connection, like how the other Nokia 2330 Classic can do.
For the Nokia 2330 Classic, I need just put the SIM into it and start the phone, then go to the configuration and just select Internet APN as the Access Point and the phone will work fine with Opera Mini and other Java applications like Ebuddy, Bolt Browser etc through “socket” connection”, without the need to request the internet settings from my operator through SMS.
But in the Nokia 2730 Classic when I put the same SIM into this phone and Select the same Internet APN as the Access point, I am not able to browse the internet on Opera Mini and I have to send SMS to my operator to get the settings.
The main problem here is that even after saving the internet Settings of my operator on the Nokia 2730 Classic, the internet does not work on in the Socket Connection, hence Opera Mini 4.2 and 5.1 (and other java applications which need the socket connection) will not install or work. (although the internet will work on the default browser of the phone)
I am also able to connect the Nokia 2730 Classic to the computer and browse the internet through Data Cable / Bluetooth normally.
I tried with another operator using an internet data plan, but got the same results.
Can someone please tell me how to adjust the settings correctly so that the Nokia 2730 will work on the Socket connection so that I can browse on Opera Mini 5.1 and 4.2 and other Java browsers and applications which work only on the Socket connection?
Another strange issue is that after trying to use the internet on the Nokia 2730 (without any positive results), when I put the same SIM back into the Nokia 2330, the internet does not work for some hours on the socket connection and I have to use the http connection till then. Quite strange.
Any help will be greatly appreciated.

My problem is sounds to be somehow related to this. Actually, I do not have reference if the problem was already on SW version 9.41 (?), but at least after the firmware upgrade (v 10.40) I get the following message "Suojattu yhteys ei käytettävissä" ~ in English "Secure connection not available" when trying to open https links e.g. directly from text message.
Obviously, the same problem happens with I try to download an application from Ovi. I am able to browse the applications in the service, but once trying to download/install the problem occurs.
Opera is capable to open the https connection, but OVI does not support it => there is no way to install any application from Ovi. I have tried both Elisa and Saunalahti SIMs, but it seems not to be a settings releated.
One note still in the firmware upgade: when doing it it first time, there was an error when restoring the backup. I made the firmware upgrade couple of times again and even so that I did not restore the backup.
Could it be that the first time firmware upgrade somehow bricked the phone? I have also been wondering, why there is no settings menu available in Web section?
Any ideas?
BR,
Mika
/* Mika */

Not allowed to use Cisco Connect anymore. Help?

I recently changed my wireless password, in the advanced settings, to not match my router password. Now that I try to use Cisco Connect, it says that I can not because I changed the a password in the advanced settings. Is there anything i can do to undo this change?

If you change the password of the router or wireless network using the setup page of the router then Cisco connect software will stop working. You can change the router password to match with Wireless network password.
Open the setup page of the router. Go to Administration tab and change the router password.
See if that makes Cisco connect to work. If not then I think you will need to reset the router and reconfigure it.

Leopard will not allow port enabling?

I had upgraded to Leopard recently and found that Leopard does not have procedures to enable specific ports like under Tiger.
I have set my Firewall to "Essential Services Only" and now I can not sync with my aTV. It say that I need to enable port 3689 and if I was in Tiger, I could do that under the Firewall preference. Now, with Leopard, I can not enable specific ports. Does anyone know how to enable ports or if it is even possible under Leopard?
Thanks,
Tony

Opening specific ports in leopard is indeed possible, just not user friendly. For the moment there are least two apps (freeware) that will do the job nicely. It can of course be accomplished with terminal commands as well. I know, you just can't wait to dive in and start typing terminal commands.... but, just in case you might want a use a GUI, here are couple links to "Noobproof" and "Waterroof":
http://www.macupdate.com/info.php/id/26502/noobproof
http://www.macupdate.com/info.php/id/23317/waterroof
You do not need to disable your Leopard's firewall to use these apps as they will work in conjunction with it.

HT4628 My Mac is not allowing other devices to connect to it over wi-fi.

My Mac is connected to the wireless network and has access to the Internet.
However it isn't allowing incoming connections from other devices/apps - eg connect 360, AirPlay speakers, logmein.
Any pointers?

Hi - I can only advise you on Logmein - when this happens to me, I delete Logmein from my computer and re-install it - when it re-installs, because it is proprietary, it configures itself to your computer's specific configuration and connection to the internet - if it doesn't work, then I would re-word the question and post it on the appropriate Mac forum.
Charlie

My Time Capsule is not allowing other wifi device to connect. Even my PC which is plugged to the Time capsule. How to let all device connect and my PC too?

My Time Capsule is not allowing other device to connect. My Mac Air did the setup and connection and it is. Now Iphone and Ipad are seeing the network but are unable to connect. Same with my desktop PC connected to the time capsule and not able to reach the net. How to fix this?

My Time Capsule is not allowing other device to connect. My Mac Air did the setup and connection and it is. Now Iphone and Ipad are seeing the network but are unable to connect. Same with my desktop PC connected to the time capsule and not able to reach the net. How to fix this?

Java.sql.SQLException: Cannot obtain connection after 3600 seconds. , Exception = Access not allowed

Using Weblogic Platform 7.0 (installed from platform700_win32.exe),
Running a BPM Doamin(WLIDomain with BPM only).
When I try to access my entity bean(CMP), the following exception is getting thrown.
I have seen a similar post in here, but the answer to that post, which says to
provide ACL. does not apply quite well my scenario.
To do this, I right clicked on the connection pool and selected define Ploicy..
It shows two options
RealmAdapterAuthorizer and DefaultAuthorizer; On DefaultAuthroizer i specified
role accessing the resource would be "everyone". - restarted the server - but
still the same error.
Please suggest a solution if any. Do i have to get some service pack for this?
TIA
Ranjith.

We have never seen a case yet where this was not a permissions problem.
Do you have a fileRealm.properties file as part of your configuration?
"Ranjith" <[email protected]> wrote in message
news:3f0fdeb3$[email protected]..
>
java.sql.SQLException: Cannot obtain connection after 3600 seconds. ,Exception
= Access not allowed
java.sql.SQLException: Cannot obtain connection after 3600 seconds. ,Exception
= Access not allowed
atweblogic.jdbc.jts.Connection.wrapAndThrowSQLException(Connection.java:701)
atweblogic.jdbc.jts.Connection.getOrCreateConnection(Connection.java:623)
atweblogic.jdbc.jts.Connection.prepareStatement(Connection.java:133)
atweblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.ja
va:139)
atweblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:81
atservice.samplemgt.v1_0.ejb.entity.BanksampletypeCMP_ckv0ao__WebLogic_CMP_RDB
MS.ej
bFindAll(BanksampletypeCMP_ckv0ao__WebLogic_CMP_RDBMS.java:873)
at java.lang.reflect.Method.invoke(Native Method)
atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.collectionFinder(RDBMSPersi
stenceManager
java:300)
atweblogic.ejb20.manager.BaseEntityManager.collectionFinder(BaseEntityManager.
java:715)
atweblogic.ejb20.manager.BaseEntityManager.collectionFinder(BaseEntityManager.
java:688)
atweblogic.ejb20.internal.EntityEJBLocalHome.finder(EntityEJBLocalHome.java:47
6)
at ...

AIM service error wont allow me to stay connected

An AIM service error occurred. The server message was: Serv:RequestTimeout.. It tells me this when i try to talk to someone.. It tells other people i am available and they instant message me but i dont recieve them.. I need help, this is a brand new macbook and will not allow me to stay connected to aim!

Hello,
To change the channels that the NetGear router is pushing the signal over, do the following:
Log into http://192.168.0.1 username: admin, password: password (this is the default unless you changed it, which I'd recommend for security anyway).
Go to wireless settings
Go to channel
Change it to something like "11" which seems to work best for me (although it can really depend with wireless interference in your area, other WiFi networks, cordless phones, microwaves, etc).
Go to the bottom and click save and then log out.
It could be possible that your wireless router is susceptible to wireless interference because of the channel it's communicating on and thus dropping your internet connection, thus causing AIM to disconnect.

Bypassing TCP port 25 restriction (i.e. worst ISP EVER; Mail is not allowed

Hi
The private company that runs my DOES NOT ALLOW Smtp connections on its "hi speed internet connection".
Meaning that Mail cannot function and I have to check via webmail.
I'm serious.
Their FAQ states:
Can I use email clients such as Microsoft Outlook or Outlook Express to send and receive emails?
No, you will only be able to use web browser based email such as Hotmail or Gmail; this is due to limitations (on TCP port 25) which have been implemented to protect you against other computer users sending unsolicited bulk emails (SPAM) via your computer.
Does anyone know a way to get around this as I NEED the functionality of Mail.....
Also,
Are all British ISPs this ridiculous?
Dieing to find a solution to this....... Many Many Many Many Thanks
PS. I already paid extra ($250USD) to enable 'super' internet which doesnt throttle VOIP, STREAMING, gaming, P2P etc.
Luke

Beginning January 1, 2006 Port 587 has been standardized as the port to use for authenticated SMTP servers although most will still work with Port 25 as well. More and more ISPs are blocking port 25 as various jurisdictions are holding them responsible for spam and/or viruses originating on their network. With unauthenticated SMTP anyone can send using that server whether they have an account or not. So the ISPs block that port with the sole exception of their own SMTP server so they can scan the messages for spam and viruses. With an authenticated SMTP server where a valid account id and password are required to send messages the provider of the server assumes the responsibility for scanning all traffic through their server thus relieving the ISP of the liability.
Whether you think this is a big brother step or not, with estimates that spam on the internet is running as high as 70% of all email traffic, if it weren't for restrictions like this email would rapidly become an unusable tool. The only annoying thing I have found about this is how few ISP Tech Support people know about this. To often their solution is "you can only use another email provider through their webmail interface."

IPF is not allowing port 33439 to connect

Similar Messages

Maybe you are looking for