Ipfilter on Solaris 10 on VMware problem

Hi! I have a problem with ipfilter on my VMware Solris 10 b72 system.
I`ve configured ipf strictly according to documentation, creating zero-sized ipf.conf and ipnat.conf with one 'rdr' rule.
current status is:
ipnat -ls shows that everything is OK, and shows some mappings.
BUT ! There is no of real traffic flows to redirected port .
Maybe somebody have any ideas ?

Similar Messages

SAP on SOLARIS on VMWare -- DELL ?

Friends, I noticed that Dell does not have hardware certified to run SAP on Solaris -> http://www.saponsolaris.com/hwlist.html
However I have a quest that requires SAP -> on Solaris -> on DELL
One of the solutions was virtualized Solaris and install SAP on Solaris: SAP -> on Solaris -> on VMWare -> on DELL
In the topic below there is a mention that SAP does not support this type of installation, but without any reference to any SAP Note:
ERP6 EHP4 SOLARIS 10 Sparc,Oracle 10g in a virtual envirn swap size requir
Do you know any case that could help me?
thank you

If I understand the license policy of Oracle Solaris properly, the only valid way of running Solaris entitled is on hardware you bought by Sun/Oracle.
There is no note because it is not supported. There are no Solaris specific VMWare tools available, there will be no integration in the monitoring becaues of that and hance it's not supported officially.
We had likewise problems and we will switch all Solaris boxes to Linux subsequently.
Markus

Document on 10g RAC setup on solaris using vmware

Hi All,
I am planning to setup "Oracle 10g RAC setup on Solaris using vmware", but I am strucked up at installation of Soaris 10 in VMWare.
Can any body please help/provide me the document on Solaris 10 installation for RAC setup .
The main problems I am having during the SOlaris 10 setup is
1) Setting up the static public and private addresses required for RAC
2) Partitioning the disk space.
Thanks in advance,
Mahipal Reddy

Refer these,
http://www.scribd.com/doc/15650880/Install-Rac-on-Solaris-Vmware
http://www.disperu.com/using-vmware-server-install-10g-rac-on-solaris/
http://nayyares.blogspot.com/2008/11/step-by-step-rac-10g-r2-solaris-10.html
Thanks
Edited by: Cj on Dec 13, 2010 2:38 AM

Installation Of Solaris In VMware

Hi,
I have a query.
What is the advantages and disadvantages of running any operating system (for eg: SOLARIS) in VMWARE(virtual machine) running on other Operating System(for eg: Windows XP).

I would suggest that you simply lump / and /usr together into at least an 8-10GB space. This assumes that you are installing an entire distribution cluster (SUNWCall or SUNWCXall). I have built some security hardened loads that require < 2GB and I'm sure I could get the footprint smaller if I had to.
I don't recall the size of an entire distribution on x86, but thought it was around 5GB for Solaris 10 for combined root and /usr.
Cheers,

Solaris 8 installation problem on an Intel base PC

I'm quite new with Solaris. I got stuck in Solaris 8 installation just at almost the very beginning. After booting up the system from floppy and conituing pressing F2 and selecting booting from CD, I got an error message like:
cannot mount on pci@0; 0/pci-ide@7; 1/ide01/sd@0; 0:a
panic[cpu0]thread=FEC17440 vfs:mountroot
then, the system reboots itself again and again every time it reaches this point. I guess it's a problem with my CD-ROM. But the problem persists even if I change CD-ROM or move CD-ROM from secondary master to primary slave, etc. I also tried to change harddisk, but did no good to the problem. Is there any experienced users who could provide me with some solutions?
I'm using a system with: Pentium 133, 32 MB Ram, 4GB HDD, 3C905TX, ATI Rage II PCI, Matshita CR-587 CD-ROM, Serial mouse and so on. I also tried another system with: P III 450, Asus P3BF, 192MB Ram, Pioneer DVD-ROM, same HDD, and so on. The problem was still there with the latter system. However, I successfully installed Solaris 7 with the latter system before. Why can't it work with Solaris 8?
Thanks a lot for the help.

I've been having the exact same problems on a PowerEdge 500SC. I have managed to get Solaris up and running on the machine, however. I booted the DCA from the floppy disk and installed from the CD-ROM. When the DCA is ready to scan for devices I use the "Specific Scan" option to tell it to look for specific devices. I tell it to scan for all devices in the listing and in doing so the DCA finds ISA-based IDE controllers. After it provides a listing of the devices it found I use the "Device Tasks" option and the "View/Edit Devices" menu item then delete the Bus Mastering IDE controller device. Once the screen comes up to ask for a boot device, the drives will show up as on the ISA controllers.
I have to go through this process every time I boot the machine but I am able to make the system run at least.
I haven't figured out the ACPI problem, yet.
Regards,
Doug

Solaric boot up problem after poweroff

Hi Everybody,
I have a solaris 10 8/07 installation on X86. I have problem regarding boot up after power off. Its not booting in multiuser mode and hangs up at the blue screen. Could we do something in the single user mode to rectify the problem, because its possible to boot in single user mode?
Thanks.

Please include your full model number when posting problems on the forums. It can be found on the bottom of your laptop.
If it's now working perfectly, then I wouldn't worry about it if I were you. However, I can say that it's best to do a system recovery with the exact media designed for your notebook and then upgrade if you wish.
- Peter

Sun Solaris 10 installation problem on IBM ThinkPad R31Notebook

Hello,
I have tried to install Sun Solaris 10 on my IBM ThinkPad R31 notebook, but the system has problem at initial stage of loading the installation software from CD. Here is the message I see on the screen when the CD is loaded:
loading stage2 ....
GNU GRUB Version 0.95 (639K lower / 514880K upper memory"
Solaris
Solaris Serial Console ttya
Solaris Serial Console ttyb (for 1x50, v60x and v65x
SunOS Release 5.10 version Generic_118855-33 32-bit
Copyright 1983-2006 Sun Microsystems, Inc All Right reserved
Use is subject to license terms
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
I changed both memory and the hard drive but I still have the same problem. Can anyone please tell me what the problem might be or what remedial step I should take to install Solaris 10 on R31?
Thanks

Did you try install check CD before the installation?
I think that there might be two main reasons:
1. Your computer is not supported
2. Hard drive may need to be formated to FAT32 or UFS

Solaris 8 installation problem on Dell PowerEdge 500SC

Hi,
I am having TWO PROBLEMS installing Solaris 8 on Dell PowerEdge 500SC.
This hardware spec is:
Pentium-III at 1GHz
256MB 133MHz ECC SDRAM
20GB 7200RPM ATA100 EIDE hard drive (on integrated ATA-100 controller)
48X EIDE CD-ROM drive (on integrated ATA-100 controller)
Motherboard: unknown
more details: http://www.dell.com/us/en/esg/topics/esg_pedge_sc_towermain_servers_3_pedge_500sc.htm
FIRST PROBLEM is the following message was shown at the hardware probe.
WARNING: ACPI Tables not in Reclaim Memory
Warning: Resource Conflict - both devices are added
NON-ACPI device: PNP0C01
Port: C00-C01, C06-C08, C14, C50-C52, C6C-C6F,
CD6-CD7
F50-F57
ACPI device: PNP0C01
Port 814-85B, 580-58F, C00-CD7, F50-F58
At this time, I was using "Solaris 8 (Intel Platform Edition) 10/01" released version.
I am not sure what this means, but it was RESOLVED with using newer "x86 DCA boot diskette (Patch-ID# 110930-05)".
But, the SECOND REAL PROBLEM is another one. It just happens booting the kernel after the hardware probe. I get the following messages about 2 minutes later, after beginning to load kernel.
WARNING:/pci@0,0/pci-ide@1/ata@1 (ata1): timeout: abort request, target=0 lun=0
WARNING:/pci@0,0/pci-ide@1/ata@1 (ata1): timeout: about device, target=0 lun=0
WARNING:/pci@0,0/pci-ide@1/ata@1 (ata1): timeout: reset target, target=0 lun=0
WARNING:/pci@0,0/pci-ide@1/ata@1 (ata1): timeout: reset bus, target=0 lun=0
After another 1 or 2 minutes I get more error and the system reboots.
Please give me any suggestion or advice!
Thanks.
Kazuyoshi

I've been having the exact same problems on a PowerEdge 500SC. I have managed to get Solaris up and running on the machine, however. I booted the DCA from the floppy disk and installed from the CD-ROM. When the DCA is ready to scan for devices I use the "Specific Scan" option to tell it to look for specific devices. I tell it to scan for all devices in the listing and in doing so the DCA finds ISA-based IDE controllers. After it provides a listing of the devices it found I use the "Device Tasks" option and the "View/Edit Devices" menu item then delete the Bus Mastering IDE controller device. Once the screen comes up to ask for a boot device, the drives will show up as on the ISA controllers.
I have to go through this process every time I boot the machine but I am able to make the system run at least.
I haven't figured out the ACPI problem, yet.
Regards,
Doug

Solaris 8 installation problem on Dell laptop

Hi
I have Dell Latitude CPx laptop which has windows now.
I have freed space from the disk and removed the freed partition from windows control using fdisk and tried installing Solaris 8, 7/01 release using interactive install.
After initial screens scanning devices, config building, prompts for language selection. As soon as I enter 0 for English, the screen prints junk charcters and beeps continuosly and hangs.
Do any of you have a clue, to get over this problem.
Also please let me know, how to disable PnP feature in BIOS, since I didn't find PnP in BIOS setup.
Thanks in advance for help.
Ram

There seems to be a patch available at http://sunsolve.sun.com
Patch-ID # 112352-01
Hope it's what you were looking for.

[Solaris 10] Installation problem on nForce4 Ultra - SATA II - raid 0

hi,
Like I was read on HW web page, Solaris 10 should work fine with 'nForce4' (without 'Ultra'),
but on mine mainboard (nForce4 Ultra) instalator was unable to found my array.
I have ASUS A8N-E (nForce4 Ultra) with 2x 250GB Seagate on SATA II RAID 0.
Is it posible to install this OS on 'nForce4 Ultra' or maybe I am doing sth wrong ?

Hi, I have the similiar problems on Solaris 10 installation.
I have a Compaq SR1710 AMD Sempron™ + 1GB RAM. I am trying make it a mini workstation.
However, the installation was never able to throught.
It always stop or freeze on the "dos" screen after I select "interactive" installation.
The last error message I got was something "Skipped rtls01" something.
I am trying to install Solaris 9 now, so far on disc 2.
Very smooth. No problem..
hope someone can give me advise on how to install version 10 on the machine.
BTW, I checked teh HCL. It seems ok, given my machine is very basic.

Solaris 10 installation problem on IBM Thinkpad - T43

Dear All,
I have a major problem while installing Solaris 10 on my IBM T43 Laptop. Here is my problem:
- I boot from Solaris 10 DVD
- I select the option "Solaris" from the grub menu
- I get 6 installation options
1. Solaris interactive(Default)
2. Custom jumpstart
3. Solaris interactive text(desktop session)
4. Solaris interactive console
5. Driver update
6. Single user shell
- I select option 1(solaris interactive)
- After some processing, I get the "proposed configuration" screen, and an option to accept/reject it.
- I reject the proposed configuration and, as a result enter the "kdmconfig" wizard.
- After this screen, I tried selecting various resolutions, but no matter, I get a blank screen in place of the graphical installation wizard after quitting kdmconfig.
As a result, I am never given a chance to install solaris at all. Can anyone you please dig me out of this hole?
Regards,
Thejasvi V

after some time a console login came with no graphics
I logged in with root and password everything went ok
but still no graphics was there then console
automatically tried to lunch the x windows by giving
message starting x login in display 0x...... butWhile you still have no graphics type, /usr/dt/bin/dtconfig -d as fast as you can and press enter. This will prevent the GUI from starting. Then type kdmconfig and set your parameters. Then use the "test" button to see if the settings that you chose actually do anything. If they just result in a blank screen or a system freeze, then head over to Linux Laptops and search for your Laptop brand.
Most of the systems on that site have thier X.org configuration online available for viewing. This will help guide you to setting up your graphics/monitor on your system.
alan
after that my monitor screen got blanked and I had to
restart my pc, I tried 3-4 times but still its not
supporting the display of my monitor and also I am
not able to find the settings to change the display.
Please help me ...
Abdul Mohsin
[email protected]

Solaris 10 Kerberos problem

I have a problem with a kerberos installation on Solaris 10.
I modiefied the krb5.conf and pam.conf file, if I do a kinit or klist kerberos is working fine.
If I try to login with ssh I get this error:
[ID 537602 auth.error] PAM-KRB5 (auth): krb5_verify_init_creds failed: No such file or directory
What does this mean ?
Regards,
Ar_min

my first guess is you are missing your keytab (/etc/krb5/krb5.keytab). ssh uses a host/FQDN@<KRB5 REALM> entry in the keytab for auth. other kerbirized services may use the same entry or ftp/FQDN@<KRB5 REALM>, ldap/FQDN@<KRB5 REALM> (openldap for example).
if you created that host entry on your kdc (or in AD, and then used ktpass to export it), and you imported it ok, run sshd in debug mode to see more: /usr/lib/ssh/sshd -ddd -p 220 (-p 220 is the port to connect to)

Solaris 8 & Keyboard Problem on DELL Inspiron Laptop

Hi all,
Trying to install Solaris 8 on Dell Inspiron 4000 laptop, but the keyboard gets stuck at the stage where I need to select the language. No response to keyboard and the machine just hangs. The keyboard works initially, I used the F2 key to continue to the next screen. Has anyone seen this before? Any help is much appreciated.
Thanks
[email protected]

I'm experiencing this exact problem on my Dell Inspiron 4000 as well. When I trying to select the Language stage of the installation, my laptop responds with garble text, and then the laptop locks up. Please let me know if you have a resolution.
vinh
[email protected]

OIM 11g VMware Problems

Hi,
I've installed OIM 11g in one virtual windows 2008 x64 server.
This server has the db installed, soa suite and oim.
Anybody else running 11g in vmware and if so what specs/os are you using?
However when I run the following command .. it does not want to start
"startManagedWeblogic.cmd oim_server1"
The error given is
** Setting up SOA specific environment for win...
PATH=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;C:\Oracle\MIDDLE~1\patch_oepe1033\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp353\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\app\jas\product\11.1.0\db_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8;C:\Oracle\Middleware\Oracle_SOA1\soa\thirdparty\edifecs\XEngine\bin
USER_MEM_ARGS=-Xms768m -Xmx1536m -XX:PermSize=512m -XX:MaxPermSize=1024m
JAVA_OPTIONS=-Dweblogic.security.SSL.trustedCAKeyStore="C:\Oracle\Middleware\wlserver_10.3\server\lib\cacerts" -Xverify:none
** End SOA Specific environment setup for win.
JAVA Memory arguments: -Xms768m -Xmx1536m -XX:PermSize=512m -XX:MaxPermSize=1024m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\user-patch.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\soa-startup.jar;;C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_oepe1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp353\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.3.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\oracle.soa.common.adapters_11.1.1\oracle.soa.common.adapters.jar;C:\Oracle\MIDDLE~1\ORACLE~1\soa\modules\commons-cli-1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\Oracle\Middleware\Oracle_IDM1\oam\agent\modules\oracle.oam.wlsagent_11.1.1\oam-wlsagent.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xsu12.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules.xquery_10.3.1.0.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\db2jcc4.jar;C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\soa-infra;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\fabric-url-handler_11.1.1.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\quartz-all-1.6.5.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1\oracle.soa.fabric.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\oracle.soa.adapter_11.1.1\oracle.soa.adapter.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\oracle.soa.b2b_11.1.1\oracle.soa.b2b.jar;C:\Oracle\Middleware\Oracle_IDM1\server\lib\oim-manifest.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;C:\Oracle\MIDDLE~1\patch_oepe1033\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp353\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\app\jas\product\11.1.0\db_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8;C:\Oracle\Middleware\Oracle_SOA1\soa\thirdparty\edifecs\XEngine\bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms768m -Xmx1536m -XX:PermSize=512m -XX:MaxPermSize=1024m -Dweblogic.Name=oim_server1 -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.security.SSL.trustedCAKeyStore="C:\Oracle\Middleware\wlserver_10.3\server\lib\cacerts" -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\servers\oim_server1 -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\Middleware\Oracle_IDM1\oam\agent\modules\oracle.oam.wlsagent_11.1.1,C:\Oracle\Middleware\Oracle_IDM1\server\loginmodule\wls,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -DOAM_POLICY_FILE=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\fmwconfig\oam-policy.xml -DOAM_CONFIG_FILE=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\fmwconfig\oam-config.xml -DOAM_PROXY_LOG=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\fmwconfig\oam_proxy_logging.properties -DOAM_ORACLE_HOME=C:\Oracle\Middleware\Oracle_IDM1\oam -Doracle.security.am.SERVER_INSTNCE_NAME=oim_server1 -DCSS_TOOLKIT_LOC=C:\Oracle\Middleware\Oracle_IDM1\oam\server\lib\csslib -Does.jars.home=C:\Oracle\Middleware\Oracle_IDM1\oam\server\lib\oes-d8 -Does.integration.path=C:\Oracle\Middleware\Oracle_IDM1\oam\server\lib\oeslib\oes-integration.jar -Does.enabled=true -Doracle.oaam.home=C:\Oracle\Middleware\Oracle_IDM1\oaam\ -Doracle.oaam.home=C:\Oracle\Middleware\Oracle_IDM1\oaam\ -Djava.awt.headless=true -DXL.HomeDir=C:\Oracle\Middleware\Oracle_IDM1\server -Djava.security.auth.login.config=C:\Oracle\Middleware\Oracle_IDM1\server\config\authwl.conf -da:org.apache.xmlbeans... -Dsoa.archives.dir=C:\Oracle\Middleware\Oracle_SOA1\soa -Dsoa.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dsoa.instance.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Dtangosol.coherence.clusteraddress=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Djava.protocol.handler.pkgs="oracle.mds.net.protocol|oracle.fabric.common.classloaderurl.handler|oracle.fabric.common.uddiurl.handler|oracle.bpm.io.fs.protocol" -Dweblogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.net.ssl.trustStore=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks -Dem.oracle.home=C:\Oracle\Middleware\oracle_common -Djava.awt.headless=true -Dums.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dweblogic.management.discover=false -Dweblogic.management.server=http://WINONE:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_ocp353\profiles\default\sysext_manifest_classpath weblogic.Server
Error occurred during initialization of VM
Could not reserve enough space for object heap
Cheers
J

I increased the memory to 8GB, more than sufficient I guess. The problem is still there.
I think the problem may be around some of the options I picked when installing.
I picked the Sun JDK instead of the JRockit one.
I picked development mode instead of production.
Do you have this version of OIM running under vmware? If so what is the config?
J
Edited by: oimj on Jan 3, 2011 12:31 PM

Solaris 10 routing problems

Anyone have routing working on Solaris 10?
Running S10_72 on a Dell Gx110 w/ 2 NICs. Trying to set it up to replace my Netgear router (and eventually configure IPv6 tunnel). having problems getting it to route packets. I turned off all of my ipfilters for debugging.
2 networks 10.10.1.x and 10.1.1.x no routing daemon, just static routes
Here are the parts of the ifconfig that matter, the output from routeadm and the routing table, along with a ping to hosts on each side and a tcpdump from the input interface elxl0 (the packets to be routed arrive here) the tcpdump on the side the packets should come out is empty (there are DNS packets and the like from the host, but no routed packets). What am I missing here?
elxl0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4>
inet 10.1.1.1 netmask ffffff00 broadcast 10.1.1.255
ether 0:b0:d0:85:e0:b4
iprb0: flags=1104843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,ROUTER,IPv4 >
inet 10.10.1.67 netmask ffffff00 broadcast 10.10.1.255
ether 0:a0:c9:98:1d:6b
# routeadm
Configuration Current Current
Option Configuration System State
IPv4 forwarding enabled enabled
IPv4 routing default (disabled) disabled
IPv6 forwarding disabled disabled
IPv6 routing disabled disabled
IPv4 routing daemon "/usr/sbin/in.routed"
IPv4 routing daemon args ""
IPv4 routing daemon stop "kill -TERM `cat /var/tmp/in.routed.pid`"
IPv6 routing daemon "/usr/lib/inet/in.ripngd"
IPv6 routing daemon args "-s"
IPv6 routing daemon stop "kill -TERM `cat /var/tmp/in.ripngd.pid`"
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
10.10.1.0 10.10.1.67 U 1 26 iprb0
10.1.1.0 10.1.1.1 U 1 2 elxl0
224.0.0.0 10.10.1.67 U 1 0 iprb0
default 10.10.1.1 UG 1 1 iprb0
127.0.0.1 127.0.0.1 UH 7 7281 lo0
PING 10.10.1.1: 56 data bytes
64 bytes from 10.10.1.1: icmp_seq=0. time=1.67 ms
----10.10.1.1 PING Statistics----
1 packets transmitted, 1 packets received, 0% packet loss
round-trip (ms) min/avg/max/stddev = 1.54/1.61/1.67/-NaN
PING 10.1.1.2: 56 data bytes
64 bytes from 10.1.1.2: icmp_seq=0. time=0.659 ms
----10.1.1.2 PING Statistics----
1 packets transmitted, 1 packets received, 0% packet loss
round-trip (ms) min/avg/max/stddev = 0.592/0.625/0.659/-NaN
tcpdump -vv -e -i elxl0
15:24:17.414252 00:c0:9f:20:16:a8 > 00:b0:d0:85:e0:b4, ethertype IPv4 (0x0800), length 98: IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], length: 84) 10.1.1.2 > 10.10.1.1: icmp 64: echo request seq 30213

Hi,
I have a Sunfire V100 - and have the exact same problem. The settings are correct; I have configure dual-NIC cards many times in the past - but this issue is simply eluding me. I can swap in a Linux machine in router / ip forwarding mode and there are no problems, but when I put back in the Sunfire I encounter the same issues you have.
In effect, packets from the LAN arrive at the NIC on the Solaris machine, but then don't get forwarded to the other NIC's gateway. I'm at a loss, but I have seen this problem pop-up (without answer) a half-dozen times in this forum alone, and multiple times on different support sites. Did you (or anyone) ever come across a solution for this? Is this not some easily overlooked yet possibly cryptic flag or variable that I've missed? Anyone?

Ipfilter on Solaris 10 on VMware problem

Similar Messages

Maybe you are looking for